CS Paper Radar

Selecting and verifying load-bearing periodic cells for elastic-wave band gaps with numerical acceptance checks

Shaoliang Yang, Jun Wang

cs.CE physics.comp-ph ·submitted 2026-11-10 22:32 UTC · v1
code/dataunusual

Abstract

A lattice mount must be stiff enough to support equipment and block vibration over a specified frequency range. Fast simulations help rank designs, but their errors can lead to a wrong acceptance decision. We present AMM (AgenticMetamaterials), an open-source Python tool that searches repeating cubic cells for targets on stiffness, the fraction of the cell that is solid, and band gaps. A complete band gap is an interval with no elastic-wave propagation in any direction. A separate checker allows for changes as the simulation grid gets finer. For gaps, it also tests for modes at sampled wave directions and wavelengths, so it can miss modes between samples. In 1,500 near-threshold tests of stiffness and solid fraction, the checker accepted 454 of 750 claims supported by the reference and none of the 750 false claims. Using the finest grid estimate alone accepted 42 false claims. In an independent finite-element comparison on ten new cells built from cubes joined by bars, the checker accepted one of two true gap claims and left all 17 false claims undecided. The reference could not classify the remaining claim. The protocol required every reported edge to err on the side of a narrower gap. The checker failed this test when it placed one upper edge too high, even though it left that thin-bar cell's claim undecided. Separating search from acceptance shows which targets the evidence supports and where a calculation needs further refinement.

Comment
34 pages, 11 figures; includes supplementary material

Closest papers

Nearest neighbours by meaning across the whole index.

Multi-Material Topology Optimization of Phononic Crystals for Targeted Elastic Wave Bandgap

cs.CE ·2026-10-22 ·Bir Bahadur Chaudhary, Wenfeng Li, Ting Chen, Xinmai Yang, Candan Tamerler +2 more
similarity 0.49
Abstract

Phononic crystals are periodic elastic structures that exhibit frequency bandgaps within which elastic waves cannot propagate. The formation and width of these bandgaps depend on the spatial distribution of material properties within periodic phononic unit cells. In this work, we propose novel topology optimization formulations to achieve multi-material design of phononic crystals for bandgap optimization at targeted frequencies, where we discover the influence of spatially varying properties of base materials on the band structures that block and permit elastic wave propagation. Specifically, we model wave propagation by Floquet-Bloch theory and solve the resulting eigenvalue problem by the finite element method along the boundary of the irreducible Brillouin zone. We first propose a multivariate weight-based method via a novel interpolation scheme that maps the design variables of an arbitrary number of candidate materials into effective density and stiffness for elastic wave-propagation calculations, where bandgaps arise from the contrast in the stiffness and inertia among material constituents. We then develop two formulations for bandgap optimization. The first formulation maximizes the gap between two adjacent frequency bands using a bound-based approach, where we introduce two auxiliary scalar variables as additional design variables and incorporate them directly into the design objective, yielding a linear, differentiable design objective, with the eigenfrequencies entering the formulation through associated constraints. The second formulation places a bandgap over a user-defined target frequency range through a dynamic band-pairing strategy, where we adaptively identify the relevant pair of adjacent bands amid optimization iterations. Towards the end, we validate the bandgap performance of our designs against the transmission loss spectra computed from COMSOL Multiphysics.

0.35

Robust topology optimization with non-Gaussian material fields using polygonal finite elements

cs.CE math.NAmath.OCstat.CO+1 ·2026-08-16 ·Nilton Cuellar, Anderson Pereira, Ivan F. M. Menezes, Americo Cunha
published similarity 0.47
Abstract

We present a computational framework for robust topology optimization that integrates polygonal finite-element discretizations, spatially correlated non-Gaussian material modeling, and non-intrusive polynomial-chaos surrogates. Spatial uncertainty in Young's modulus is represented as a homogeneous non-Gaussian random field obtained via a memoryless transformation of a truncated Karhunen-Loève expansion, ensuring physical admissibility through positivity of stiffness while preserving the prescribed autocovariance. Polygonal finite elements provide a stable discretization for density-based optimization on unstructured meshes and mitigate checkerboard artefacts and mesh bias, while the sparse polynomial-chaos expansion enables efficient estimation of low-order statistical moments required by the robust objective at a fraction of the cost of intrusive or Monte Carlo approaches. Numerical studies on a cantilever and a curved beam show that introducing non-Gaussian material variability leads to systematic load-path redistribution and a reallocation of 6-12% of the structural volume, together with a reduction in compliance scatter. The non-intrusive surrogate reproduces intrusive reference results within 3% using an order of magnitude fewer full finite-element analyses. These results demonstrate that the proposed framework offers a physically consistent and computationally efficient route to topology-optimized designs that remain reliable under realistic material uncertainty.

0.27

Scaled boundary finite elements for FFT-based computational micromechanics

cs.CE math.NA ·2026-11-16 ·Flavia Gehrig, Carolin Birk, Matti Schneider
similarity 0.47
Abstract · 32 pages, 7 figures. Submitted to International Journal of Numerical Methods in Engineering

We introduce a matrix-free FFT-based solver for three-dimensional linear elastic homogenization problems discretized by the scaled boundary finite element method (SBFEM) on a voxel grid. Owing to its analytical solution in the radial direction, the SBFEM discretization is inherently softer than fully integrated voxel finite elements, whereas its displacement-based formulation remains symmetric, conforming, and supports arbitrary stiffness anisotropy. These properties make SBFEM an attractive candidate for porous and highly heterogeneous microstructures, where existing voxel-based FFT discretizations offer no generally reliable choice: Reduced-integration hexahedral elements, equivalently the rotated staggered grid discretization, may suffer from hourglass instabilities in the presence of voids, whereas fully integrated hexahedral elements are often too stiff. The proposed discretization uses hexahedral SBFEM cells on the full voxel mesh of a regular periodic grid, retaining the simplicity of a fixed-resolution voxel representation without requiring adaptive mesh coarsening. The main contribution is a preconditioner based on the homogeneous SBFEM stiffness operator. We show that this preconditioner may be applied locally in Fourier space and that the condition number of the preconditioned system is bounded by the material contrast, independently of the grid resolution. This result enables a fully matrix-free implementation of the SBFEM-discretized problem, without assembling or storing the global stiffness matrix. Numerical experiments on a short-fibre reinforced composite, a polyurethane foam and a sand-based binder jet microstructure demonstrate robust convergence and competitive accuracy compared with established voxel discretizations. In particular, SBFEM remains stable for porous microstructures, for which reduced-integration hexahedral elements become unstable.

0.38

Fracture-Bench: A Controlled Benchmark Suite for Machine Learning Surrogates in Phase-Field Fracture Mechanics

cs.CE physics.comp-ph ·2026-11-02 ·Meenu Krishnan U., Maryam Hakimzadeh, Indrashish Saha, Meer Mehran Rashid, Lori Graham-Brady +1 more
benchmark similarity 0.44
Abstract · 38 pages, 15 Figues

Machine-learning surrogates are increasingly proposed to replace phase-field fracture simulations in many-query tasks such as uncertainty quantification, inverse analysis and design. Little controlled evidence shows which architectures are reliable, for which fracture problems and how far beyond their training data. We introduce Fracture-Bench, an open benchmark of two phase-field datasets with fixed splits, common test metrics and a description of each dataset's physical regime. Dataset~1 contains 1,000 AT2 simulations of multiple cracks growing from a notched hole in a hyperelastic plate under random non-uniform biaxial boundary displacements (44 load steps, $128\times128$ grid). Dataset~2 contains 4,000 PF-CZM simulations of a pre-cracked plate with two inclusions, each ten times stiffer or more compliant than the matrix ($128\times256$ grid). We train a Fourier neural operator (FNO), DeepONet, Latent DeepONet, a UNet and a conditional diffusion model on identical splits and compare one test metric per dataset, training time, inference time and model size. On Dataset~1, FNO and Latent DeepONet attain mean test errors of order $10^{-6}$, about ten times lower than UNet and DeepONet. On Dataset~2, the diffusion model is most accurate, with about one sixth of the UNet error, but requires \SI{706}{s} per prediction versus \SI{6}{ms} for UNet. For all architectures, most of the error occurs in the final load steps, after crack localization. Dataset~2 contains initial cracks less than one grid cell apart that produce qualitatively different paths. Architecture rankings therefore depend on the task, and errors averaged over densely sampled inputs reveal little about near-bifurcation cases. Data, codes, splits, regime descriptors and generalization splits are public, with a protocol for adding under-represented regimes such as mixed-mode, three-dimensional and experimentally paired fracture.

0.21

Physics as the label for measuring and correcting materials reasoning in multimodal models

cs.CV cond-mat.mtrl-sci ·2026-09-10 ·Hasan Kurban, Rasul Khanbayov, Mustafa Kurban
benchmark similarity 0.43
Abstract

Vision-language and language models increasingly interpret materials data, yet benchmarks report that they hallucinate invalid properties and violate physical law. Evaluation matches final answers to scarce human labels, while discovery agents verify final proposals or density functional theory (DFT) execution. Neither measures the physical consistency of a model's reasoning chain. Materials data carries its own physics, making a large class of materials reasoning verifiable without annotation. We introduce MatPCR, a label-free benchmark whose programmatic oracles check diffraction geometry through Bragg's law, scale bars, spectral peaks, and Materials Project-grounded checks of near-hull stability, computed band-gap class, and net magnetization. We define the Physical-Consistency Rate over image and structure inputs; introduce Constraint-Grounded Self-Verification, an agentic loop whose gain survives self-refinement and equal-compute re-prompting controls; release an open verifier useful in distribution but near chance on all six held-out constraint types; and derive an exact identity for how oracle error displaces the reported rate.

0.25

Component-wise hyperreduction for nonlinear solid mechanics problems

cs.CE ·2026-08-19 ·Stephan Ritzert, Jannick Kehls, Erik Faust, Hagen Holthusen, Stefanie Reese +1 more
similarity 0.43
Abstract

Hyperreduced nonlinear solid-mechanics components can be generated offline and reused as transferable building blocks across different assemblies, boundary conditions, meshes, material parameters, and constitutive models. We use proper orthogonal decomposition (POD) and energy conserving sampling and weighting (ECSW) on the component level and connect the substructures by mortar mesh tying. The POD modes and the ECSW weights and elements are computed offline from simulations of single components and the finite rigid body motions are treated by 12 additional rigid body modes per substructure. The numerical examples demonstrate errors below 1 \% for large quasi-static assemblies while evaluating less than 10 \% of the elements. The same component bases and ECSW elements are successfully reused for finite-strain viscoelastic dynamics, although they were trained only on elastic Neo-Hookean component simulations. These results indicate that component-wise hyperreduction can provide reusable reduced building blocks for modular nonlinear solid-mechanics simulations.

0.51

Voxel-based block variational quantum linear solver: a hybrid quantum-classical method for static analysis of solids

cs.CE ·2026-09-24 ·Feng Wu, Chen Li, Li Zhu, Yuxiang Yang, Xu Guo
similarity 0.42
Abstract · 35 pages, 22 figures, 5 tables

In solid mechanics, finite element discretization of large-scale static problems produces large sparse linear systems whose solution requires substantial computation time and memory. The variational quantum linear solver (VQLS) offers a hybrid quantum-classical route, but its use in quantum finite element analysis is limited by the decomposition of nonunitary matrices, barren plateaus, and the measurement cost of expectation values. We propose a voxel-based block variational quantum linear solver (Voxel-BVQLS) that combines structured matrix decomposition, the principle of minimum potential energy, and batched quantum tests. First, we construct an LCU decomposition of the stiffness matrix from the recursive block-banded structure of voxel-grid finite element matrices, with the number of unitary terms bounded independently of the problem size. Second, we optimize the ansatz parameters using a minimum-potential-energy objective in place of a conventional VQLS loss function, thereby mitigating barren plateaus in the studied problems. Third, we introduce a block-Hadamard test whose circuit directly estimates weighted sums of multiple inner products, reducing the number of circuit configurations required per iteration. We assessed the proposed method in noiseless classical simulations using three examples. These examples show that the method reduces both the number of unitary terms in the LCU decomposition and the number of iterations required to converge, while still yielding solutions of finite accuracy. Voxel-BVQLS thus provides a structured hybrid quantum-classical framework for quantum finite element analysis on regular grids.

0.21

Process-zone condensation: a discretization-exact reduced cell model for FE$^2$ analysis of composites with fibre-matrix debonding and matrix plasticity

cs.CE ·2026-11-03 ·Leonilson Toffoli Pedrini, Maycoln Conci, Rafael Marin Ferro
similarity 0.42
Abstract · 27 pages, 19 figures, 17 tables; 9-page supplementary material appended. Submitted to Composite Structures. Code and data: https://doi.org/1…

Periodic composites with cohesive interfaces and matrix plasticity require nonlinear cell solutions in multiscale analysis. Process-zone condensation eliminates the linear elastic remainder of the cell by a Schur complement, retaining all interfacial and process-zone internal variables. Influence matrices recover macroscopic stress and consistent tangent. One back-substitution per increment checks that the matrix outside the retained zone remains elastic. While this holds, the reduction is exact relative to the full discretisation, also with a plastic matrix, and requires no training. In an E-glass/epoxy cell, eight of nine two-dimensional paths agree with the full cell to 1e-11 in stress and tangent; the check flags the ninth. Three paths on each of two three-dimensional meshes need zone expansion. Excluding setup and checks, two-dimensional path timings show an aggregate speed-up of 3.3; certified three-dimensional zones show none. In adaptive finite element squared (FE$^2$) simulations of a perforated plate, the reduced solver reproduces the full-cell response within solver tolerances, 1.51 times faster for glass/polypropylene and slower for glass/epoxy. Independent Ansys models agree to below 1e-3 in cell stress and about 0.6% in plate reactions, although local damage and plasticity onsets differ. The advantage depends on zone size, active set and adaptation costs.

0.39