CS Paper Radar

Process-zone condensation: a discretization-exact reduced cell model for FE$^2$ analysis of composites with fibre-matrix debonding and matrix plasticity

Leonilson Toffoli Pedrini, Maycoln Conci, Rafael Marin Ferro

cs.CE ·submitted 2026-11-03 15:28 UTC · v1

Abstract

Periodic composites with cohesive interfaces and matrix plasticity require nonlinear cell solutions in multiscale analysis. Process-zone condensation eliminates the linear elastic remainder of the cell by a Schur complement, retaining all interfacial and process-zone internal variables. Influence matrices recover macroscopic stress and consistent tangent. One back-substitution per increment checks that the matrix outside the retained zone remains elastic. While this holds, the reduction is exact relative to the full discretisation, also with a plastic matrix, and requires no training. In an E-glass/epoxy cell, eight of nine two-dimensional paths agree with the full cell to 1e-11 in stress and tangent; the check flags the ninth. Three paths on each of two three-dimensional meshes need zone expansion. Excluding setup and checks, two-dimensional path timings show an aggregate speed-up of 3.3; certified three-dimensional zones show none. In adaptive finite element squared (FE$^2$) simulations of a perforated plate, the reduced solver reproduces the full-cell response within solver tolerances, 1.51 times faster for glass/polypropylene and slower for glass/epoxy. Independent Ansys models agree to below 1e-3 in cell stress and about 0.6% in plate reactions, although local damage and plasticity onsets differ. The advantage depends on zone size, active set and adaptation costs.

Comment
27 pages, 19 figures, 17 tables; 9-page supplementary material appended. Submitted to Composite Structures. Code and data: https://doi.org/10.5281/zenodo.23512947

Closest papers

Nearest neighbours by meaning across the whole index.

Scaled boundary finite elements for FFT-based computational micromechanics

cs.CE math.NA ·2026-11-16 ·Flavia Gehrig, Carolin Birk, Matti Schneider
similarity 0.54
Abstract · 32 pages, 7 figures. Submitted to International Journal of Numerical Methods in Engineering

We introduce a matrix-free FFT-based solver for three-dimensional linear elastic homogenization problems discretized by the scaled boundary finite element method (SBFEM) on a voxel grid. Owing to its analytical solution in the radial direction, the SBFEM discretization is inherently softer than fully integrated voxel finite elements, whereas its displacement-based formulation remains symmetric, conforming, and supports arbitrary stiffness anisotropy. These properties make SBFEM an attractive candidate for porous and highly heterogeneous microstructures, where existing voxel-based FFT discretizations offer no generally reliable choice: Reduced-integration hexahedral elements, equivalently the rotated staggered grid discretization, may suffer from hourglass instabilities in the presence of voids, whereas fully integrated hexahedral elements are often too stiff. The proposed discretization uses hexahedral SBFEM cells on the full voxel mesh of a regular periodic grid, retaining the simplicity of a fixed-resolution voxel representation without requiring adaptive mesh coarsening. The main contribution is a preconditioner based on the homogeneous SBFEM stiffness operator. We show that this preconditioner may be applied locally in Fourier space and that the condition number of the preconditioned system is bounded by the material contrast, independently of the grid resolution. This result enables a fully matrix-free implementation of the SBFEM-discretized problem, without assembling or storing the global stiffness matrix. Numerical experiments on a short-fibre reinforced composite, a polyurethane foam and a sand-based binder jet microstructure demonstrate robust convergence and competitive accuracy compared with established voxel discretizations. In particular, SBFEM remains stable for porous microstructures, for which reduced-integration hexahedral elements become unstable.

0.39

Mixed-Dimensional Electromechanical Coupling of Embedded Beam Networks in Soft Dielectric Composites

cs.CE ·2026-09-28 ·L. River Spencer, Manuel K. Rausch, Chad Landis, Jan N. Fuhg
similarity 0.53
Abstract · 36 pages, 19 Figures

Soft electroactive composites can exhibit strongly architecture-dependent mechanical and electrical responses, but explicitly resolving dense fiber networks in three dimensions is computationally expensive. We develop a mixed-dimensional finite-element formulation in which electroactive fibers are represented by geometrically exact beams embedded in a deformable dielectric matrix. Unlike existing electroactive beam formulations in which the electric potential is defined directly on the beam, the embedded fibers here are driven by the three-dimensional electric field of the surrounding matrix. The matrix field is sampled along the beam centerlines and enters the beam dielectric enthalpy directly, providing two-way electromechanical coupling without introducing independent electric-potential degrees of freedom on the beams. Beam and matrix mechanics are coupled through projected mortar constraints, and the electromechanical problem is solved monolithically. We use the formulation as the microscale model in a periodic homogenization framework to compute effective stress and electric displacement. Verification studies quantify discretization and field-sampling sensitivity, followed by structured and irregular network examples that demonstrate architecture-dependent mechanical and electrical responses without body-fitted three-dimensional fiber meshes.

0.32

Concurrent two-scale topology optimization of printable bone scaffolds via rectified-flow generation and exact latent-space refinement

cs.LG physics.comp-ph ·2026-10-18 ·Reza T Batley, Sourav Saha
benchmarkunusual similarity 0.50
Abstract

Bone scaffolds must reconcile a macroscale mechanical response with microscale geometric feasibility, yet conventional approaches to their design restrict attainable constitutive properties. This work presents a concurrent two-scale topology optimization framework; a conditional rectified flow generates periodic lattice microstructures, which are then refined in latent space by exact finite-element homogenization sensitivities. The resulting unit-cell geometries and their spatial assignments are jointly optimized under mechanical and feature-size constraints. In a distal rabbit femur benchmark, all eight flow-started refinements produce printable cells with maximum relative errors under 1\% across six prescribed engineering moduli. Constructing the implant from a single tiled cell reproduces intact whole-femur compliance within 0.1\% and regional strain energy within 0.35\% under four loading conditions. In human femoral reconstruction, multiscale concurrent optimization produces a cortical mid-shaft scaffold with porosity 63\% while satisfying the compliance constraint within 2\% under walking and stair-climbing loads. It achieves an 84\% porosity on a proximal cancellous scaffold with strain-energy deviations below 0.25\% under the same loads. Analysis of the learned representations reveals distinct architectural families in latent space. Further, the attention heads of the rectified-flow transformer specialize for spatial shifts -- learning the analogue of a finite-difference stencil -- and coordinate symmetries, with ablations showing their influence on generated topologies. These results establish a route to printable, mechanically constrained scaffold designs. The framework is general enough for extending to many other multiscale structural design applications including topology-microstructure co-design in metal additive manufacturing.

0.22

Component-wise hyperreduction for nonlinear solid mechanics problems

cs.CE ·2026-08-19 ·Stephan Ritzert, Jannick Kehls, Erik Faust, Hagen Holthusen, Stefanie Reese +1 more
similarity 0.50
Abstract

Hyperreduced nonlinear solid-mechanics components can be generated offline and reused as transferable building blocks across different assemblies, boundary conditions, meshes, material parameters, and constitutive models. We use proper orthogonal decomposition (POD) and energy conserving sampling and weighting (ECSW) on the component level and connect the substructures by mortar mesh tying. The POD modes and the ECSW weights and elements are computed offline from simulations of single components and the finite rigid body motions are treated by 12 additional rigid body modes per substructure. The numerical examples demonstrate errors below 1 \% for large quasi-static assemblies while evaluating less than 10 \% of the elements. The same component bases and ECSW elements are successfully reused for finite-strain viscoelastic dynamics, although they were trained only on elastic Neo-Hookean component simulations. These results indicate that component-wise hyperreduction can provide reusable reduced building blocks for modular nonlinear solid-mechanics simulations.

0.51

Machine-learning-assisted multiscale topology optimization of functionally graded superimposed lattice structures

cs.CE ·2026-08-28 ·Prashant Kumar Gupta, Jonathan Stollberg, Dominik Schillinger, Mohammad Ashraf Iqbal
benchmark similarity 0.49
Abstract

Functionally graded lattice structures enable lightweight designs with spatially tunable stiffness and density, but their use in multiscale topology optimization is limited by the cost of repeated computational homogenization. This work presents a machine learning-assisted multiscale optimization framework for regular superimposed lattice structures. The unit cell is formed by combining body-centered cubic, face-centered cubic, and simple cubic lattice components, each controlled by an independent geometric parameter. Offline computational homogenization is used to generate effective stiffness data, which are then used to train a Cholesky-constrained neural network surrogate. This representation reconstructs the homogenized stiffness tensor in a physically admissible form. A separate neural network is trained to predict relative density from Monte Carlo-based density estimates. We incorporate our surrogates into a two-stage topology optimization strategy. First, a macroscale topology is obtained using the solid isotropic material with penalization (SIMP) method. The resulting solid region is then used for microscale lattice optimization, where the local lattice parameters are updated using the method of moving asymptotes (MMA). The trained stiffness and density surrogates replace repeated online homogenization during this stage. The method is demonstrated on a three-dimensional Messerschmitt-Bölkow-Blohm (MBB) beam benchmark, producing spatially varying lattice parameters and relative density fields consistent with compliance minimization under a material constraint.

0.27

SLIM: Learning an Operator for Material-Efficient 3D Lattice Refinement

cs.GR ·2026-10-17 ·Yueze Zhu, Yu Xing, Tianyang Xue, Peng-Shuai Wang, Jikai Liu +2 more
similarity 0.49
Abstract

Lattice inverse-design methods can generate cells that match prescribed effective properties, but property feasibility does not imply material efficiency. Removing redundant material from an existing lattice while preserving its homogenized elasticity ordinarily requires solving a separate constrained topology optimization problem for each cell, making large-scale refinement computationally expensive. We introduce SLIM (Structural Lightweighting via Implicit Mapping), a neural lattice-refinement model that replaces this per-instance iterative optimization with a single forward prediction. SLIM uses a dual-octree implicit network to predict the signed-distance field of a lightweight lattice and is trained on input--output pairs generated by property-constrained topology optimization. To improve stiffness preservation, we use homogenization sensitivities computed on the optimized target to estimate how residual voxel errors in a prediction affect its homogenized stiffness, and penalize this estimated change during training. Once trained, SLIM requires no topology optimization, homogenization analysis, or sensitivity evaluation during prediction. On the held-out test set of 906 lattices, SLIM achieves a mean relative volume-fraction reduction of 15.90%, a lightweighting success rate of 90.51%, and a mean normalized aggregate TO-target error of 0.636%, while reducing the average per-lattice generation time from 2516.0 s with direct TO to approximately 0.5 s. These results show that SLIM provides a fast neural surrogate for repeated topology-optimization-based refinement of 3D lattices.

0.08

Mixed-dimensional Matrix and Fiber Fracture in Soft Fibrous Materials

cs.CE ·2026-11-17 ·L. River Spencer, Matthew J. Lohr, Chad Landis, Manuel K. Rausch, Jan N. Fuhg
similarity 0.48
Abstract · 25 Pages, 10 figures

We develop a mixed-dimensional finite-element formulation for modeling fracture in soft materials containing embedded fiber networks. Individual fibers are represented by lower-dimensional beam elements embedded in a nearly incompressible hyperelastic continuum, preserving complex network architectures without requiring each fiber to be resolved volumetrically. Separate phase fields describe fracture in the surrounding matrix and the embedded fibers, allowing both failure processes to evolve independently while interacting through their coupled mechanical response. The matrix is modeled using a stabilized displacement-pressure formulation, while the fibers are represented by finite-rotation beam elements that account for damage driven by axial stretching and bending. Both constituents are coupled through translational and rotational penalty terms, allowing forces and moments to be transferred between independent discretizations without requiring the matrix mesh to conform to the fiber geometry. The mechanical response and fracture evolution of both constituents are solved simultaneously within a monolithic framework that enforces irreversible damage. Applications to increasingly complex fiber networks illustrate how matrix cracking and fiber failure interact, redistributing forces as individual fibers degrade.

0.30

OmniRemesh: Adaptive and Quasi-differentiable Remeshing for Crystal Plasticity Simulation and Inverse Parameter Calibration under Large Deformation

cs.CE ·2026-08-16 ·Ningyu Yan, Yuntong Huang, Yang Xiang
similarity 0.48
Abstract

Large-deformation crystal plasticity finite element method (CPFEM) simulations are often limited by accumulated mesh distortion, which degrades accuracy and numerical stability, while adaptive remeshing introduces discrete topology changes that impede gradient-based inverse analysis. We present OmniRemesh, a unified framework that addresses these forward and inverse challenges through two developments. First, a structure-driven remeshing method dynamically redistributes local mesh resolution according to both microstructural geometry and the evolving mechanical state. By refining grain boundaries and localized deformation regions while retaining a coarser mesh elsewhere, the method maintains mesh quality and physical consistency, improves the accuracy and robustness of large-deformation calculations, and resolves grain-scale heterogeneity without uniformly dense discretization. Second, a frozen-remeshing-branch strategy locally fixes the mesh sequence within a parameter trust region and periodically updates it as the parameters evolve. This treatment provides approximate automatic-differentiation sensitivities despite topology changes, enabling efficient inverse calibration of constitutive parameters against both macroscopic and local observables. Numerical examples demonstrate accurate and stable CPFEM simulations up to 80\% tensile deformation. The inverse calibration successfully recovers both macroscopic and local responses. OmniRemesh thus provides a practical framework for large-deformation CPFEM and remeshing-aware constitutive calibration.

0.04