CS Paper Radar

Mixed-dimensional Matrix and Fiber Fracture in Soft Fibrous Materials

L. River Spencer, Matthew J. Lohr, Chad Landis, Manuel K. Rausch, Jan N. Fuhg

cs.CE ·submitted 2026-11-17 22:05 UTC · v1

Abstract

We develop a mixed-dimensional finite-element formulation for modeling fracture in soft materials containing embedded fiber networks. Individual fibers are represented by lower-dimensional beam elements embedded in a nearly incompressible hyperelastic continuum, preserving complex network architectures without requiring each fiber to be resolved volumetrically. Separate phase fields describe fracture in the surrounding matrix and the embedded fibers, allowing both failure processes to evolve independently while interacting through their coupled mechanical response. The matrix is modeled using a stabilized displacement-pressure formulation, while the fibers are represented by finite-rotation beam elements that account for damage driven by axial stretching and bending. Both constituents are coupled through translational and rotational penalty terms, allowing forces and moments to be transferred between independent discretizations without requiring the matrix mesh to conform to the fiber geometry. The mechanical response and fracture evolution of both constituents are solved simultaneously within a monolithic framework that enforces irreversible damage. Applications to increasingly complex fiber networks illustrate how matrix cracking and fiber failure interact, redistributing forces as individual fibers degrade.

Comment
25 Pages, 10 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Mixed-Dimensional Electromechanical Coupling of Embedded Beam Networks in Soft Dielectric Composites

cs.CE ·2026-09-28 ·L. River Spencer, Manuel K. Rausch, Chad Landis, Jan N. Fuhg
similarity 0.63
Abstract · 36 pages, 19 Figures

Soft electroactive composites can exhibit strongly architecture-dependent mechanical and electrical responses, but explicitly resolving dense fiber networks in three dimensions is computationally expensive. We develop a mixed-dimensional finite-element formulation in which electroactive fibers are represented by geometrically exact beams embedded in a deformable dielectric matrix. Unlike existing electroactive beam formulations in which the electric potential is defined directly on the beam, the embedded fibers here are driven by the three-dimensional electric field of the surrounding matrix. The matrix field is sampled along the beam centerlines and enters the beam dielectric enthalpy directly, providing two-way electromechanical coupling without introducing independent electric-potential degrees of freedom on the beams. Beam and matrix mechanics are coupled through projected mortar constraints, and the electromechanical problem is solved monolithically. We use the formulation as the microscale model in a periodic homogenization framework to compute effective stress and electric displacement. Verification studies quantify discretization and field-sampling sensitivity, followed by structured and irregular network examples that demonstrate architecture-dependent mechanical and electrical responses without body-fitted three-dimensional fiber meshes.

0.32

A Differentiable Framework for Inverse Identification of Heterogeneous Cohesive Laws

cs.CE physics.comp-ph ·2026-10-24 ·Sida Hao, Jinkyo Han, Bahador Bahmani
similarity 0.54
Abstract

This work develops a differentiable finite element framework based on an intrinsic cohesive-zone formulation for identifying traction-separation laws from global force-displacement histories and spatially sparse strain measurements. The framework employs physics-constrained neural networks to represent flexible, thermodynamically structured cohesive laws, with sensitivities computed through automatic differentiation and a discrete adjoint that accounts for the history-dependent evolution of interfacial damage. To enable identification of spatially heterogeneous cohesive behavior, we extend learned constitutive priors to irreversible interfacial damage by constructing a shared, low-dimensional family of cohesive laws from representative traction-separation histories. This representation exploits common constitutive structure and parameter sharing to reduce the number of unknowns and regularize the inverse problem, while allowing local cohesive behavior to vary spatially through latent coordinates. Numerical investigations involving double-cantilever beams and fiber-matrix composites demonstrate that accurate reproduction of global force-displacement responses does not necessarily imply accurate recovery of the underlying cohesive laws. Incorporating spatially resolved strain measurements substantially improves constitutive identification, even when the admissible responses are constrained by a learned prior. Comparisons with conventional bilinear cohesive models and Bayesian optimization further illustrate the benefits of the learned constitutive representation and adjoint-based identification for high-dimensional inverse problems.

0.20

Finite Element Modeling of Fracture in Brittle Foods with Physically Consistent Parameter Calibration: A Practical Case Study on Cooled Dark Chocolate

cs.CE ·2026-10-27 ·Patrick Kurzeja, Felix Rörentrop, Kai Langenfeld, Jörn Mosler
theory similarity 0.52
Abstract

Fracture in food can be undesired during production and transportation but also intended during cutting, grinding or mastication. The associated peak load, the deformation at failure and the resulting fragment geometry are all product properties. This work condenses the modeling of such fracture into a physically rigorous recipe that considers the practical constraints imposed by finite element simulations where necessary and applies idealized theoretical assessments where applicable. Cooled dark chocolate serves as a reproducible model material. Two well-established modeling frameworks for Griffith-type brittle fracture are assessed at an affordable spatial discretization: a sharp-interface and a diffuse phase-field approach. The assessment covers the choice of numerical framework, its discretization and a staged identification of the model parameters. Each parameter is identified from the loading stage that governs it: elastic parameters from pre-crack tension and compression, critical energy release rate from three-point-bending peak force, and the phase-field width last. The phase-field width interferes with the structural response, crack curvature and stress fields, depending on its lower bound set by the affordable spatial resolution. Elastic slope, peak force and crack path therefore cannot be met practically by a single parameter set. The objective must be fixed for the calibration of the model parameters and reported together with the numerical parameters and the boundary value problem.

0.27

An FE2 model for shear-deformable beams considering periodic lattice-like truss mesostructures

cs.CE ·2026-10-06 ·Julian Ochs, Jens Wackerfuß
similarity 0.50
Abstract · 37 pages, 21 figures, 10 tables, 66 references

The increasing use of lattice-like architectures in load-bearing members, facilitated by advances in additive manufacturing, calls for efficient multiscale approaches to their structural analysis. For slender lattice-like structures, beam models provide a computationally efficient macroscopic representation while retaining the ability to account for the underlying lattice architecture through an homogenization approach. Although finite element squared (FE2) approaches combining beam models at the macroscopic scale with continuum models at the microscopic scale have been established, an FE2 framework combining a beam-based macroscopic model with a truss-based microscopic model of a lattice structure has not yet been reported. To address this gap, an FE2 framework is developed for three-dimensional shear-deformable beams with periodically repeated lattice-like microstructures and periodic displacement boundary conditions. The proposed FE2 framework introduces constraint equations that (a) prevent rigid-body translations and rotations of the representative volume element (RVE) without imposing additional kinematic restrictions and (b) ensure that the homogenized stress resultants and material matrix are independent of the selected RVE length. To mitigate artificial boundary effects arising at the boundaries of the lattice-like RVE, local correction factors are introduced. The framework is assessed through numerical studies of two- and three-dimensional lattice-like structures with different geometries, considering both geometric and material linearity and nonlinearity. The results demonstrate the independence of the homogenized stress resultants and material matrix from the selected RVE length and show good agreement with the corresponding reference models in all investigated cases.

0.28

Deep Learning-based Mechanical Characterization of Synthetically Generated Plant Fibers under Transverse Compression

cs.CV ·2026-10-12 ·Nikolaos Kegkeroglou, Bilal Sabillah, Myrto Inglezou, Vincent Placet, Céndric Clevy +1 more
published similarity 0.50
Abstract

Plant fibers are increasingly used as sustainable reinforcements in composites, but the intrinsic variability of their microstructure causes substantial scatter in transverse mechanical behavior, complicating composite design. Characterizing this behavior relies on finite element (FE) simulations requiring several minutes of high-performance computing per fiber, making high-throughput characterization across realistic fiber populations impractical. In this study, we propose a deep learning framework replacing this FE bottleneck with a fast pipeline. It includes two coupled recursive U-Nets predicting the step-by-step evolution of fiber deformation and internal stress fields under transverse compression, followed by a regression CNN estimating the transverse Young's modulus from the final stress field. Unlike prior approaches predicting stress fields for fixed configurations or idealized geometries, our framework recursively resolves the full temporal stress evolution for synthetic fibers derived from real hemp cross-sections, with or without a lumen. Trained on 1,000 synthetic fiber geometries with FE ground truth, it reproduces the stress field sequence with a Structural Similarity Index Measure (SSIM) of $0.9574 \pm 0.0074$ and a Root Mean Squared Error (RMSE) of $0.0345 \pm 0.0079$. It estimates transverse Young's modulus with an $R^2$ of $0.938 \pm 0.024$, a Mean Absolute Error (MAE) of $24.31 \pm 1.23$ MPa, and a Mean Absolute Percentage Error (MAPE) of $5.25 \pm 0.91\%$. Inference requires under one second per fiber versus five minutes per FE simulation, drastically reducing computational cost. This offers a fast, reliable tool for mechanical characterization of synthetic plant fibers, with promising applications in designing natural fiber-reinforced composites.

0.32

STC-MPM: Coupled Deformation, Progressive Damage, and Cut Formation in Soft-Tissue Cutting

cs.RO ·2026-10-05 ·Kewei Zuo, Jiahe Chen, Ziao Kuang, Junsheng Zhu, Etsuko Kobayashi
similarity 0.49
Abstract

Cutting is a recurring operation in robotic au tomation, from food preparation to surgical tissue resection. For highly compliant targets, blade motion may deform or displace the material rather than advance the intended cut, while progressive failure changes load transfer and subsequent tool tissue interaction. A computational description must therefore connect cut formation to the evolving mechanical response, rather than specifying the incision independently of material failure. We present STC-MPM (Soft Tissue Cutting with the Material Point Method), a framework that couples finite-strain deformation, history-driven continuum damage, and configurable post-failure treatment. Damage initiates only when a tensile strain history exceeds a material threshold within the blade process zone. Progressive degradation changes stress transmission before the post-failure policy is applied, while the remaining tissue continues to deform, move, and interact with the tool. Numerical scalpel studies using delayed particle deactivation follow this response through insertion and withdrawal. Under identical blade motion, reducing the damage-rate limit leaves the first recorded damage time unchanged but delays and increases peak reaction force, delays particle deactivation, and increases the fixed-cohort displacement statistic at maximum insertion. The matched comparison illustrates how post-initiation failure evolution alters subsequent tool loading and recorded material motion. STC-MPM thus supports joint analysis of cut formation and accompanying tissue response without a pre-inserted cutting interface.

0.20

An improved bond-associated peridynamic model and its adaptive coupling with CCM for fracture analysis

cs.CE ·2026-08-12 ·Wenping Han, Bowen Sun, Shankun Liu, Fei Han
similarity 0.49
Abstract

This paper reformulates the correction factor in the force-state of the bond-associated peridynamic (BAPD) model. The reformulation is established from the strain energy density equivalence between the BAPD model and the classical continuum mechanics (CCM) model at a material point. With the FEM solution taken as the reference, the proposed correction factor improves the accuracy of the BAPD solution in this study. Furthermore, a BAPD-CCM coupled model is developed based on the above energy density equivalence, and a ``Morphing" function is introduced to achieve a smooth transition between the two models. For time integration, explicit schemes are adopted for both quasi-static and dynamic problems. In the spatial discretization, the CCM model is discretized by elements, whereas the BAPD model is discretized by particles. The solution accuracy of the coupled model is validated by comparison with the FEM solution and by evaluating the $L^{2}$ norm, the $H^{1}_{\mathrm{semi}}$, and the energy norm of the displacement error. Two- and three-dimensional numerical examples show that the proposed model has higher computational efficiency. For example, in the Mode I crack propagation problem, its computational cost is reduced by more than 72\% compared with that of the pure BAPD model, and the predicted crack patterns agree with experimental results.

0.04

Process-zone condensation: a discretization-exact reduced cell model for FE$^2$ analysis of composites with fibre-matrix debonding and matrix plasticity

cs.CE ·2026-11-03 ·Leonilson Toffoli Pedrini, Maycoln Conci, Rafael Marin Ferro
similarity 0.48
Abstract · 27 pages, 19 figures, 17 tables; 9-page supplementary material appended. Submitted to Composite Structures. Code and data: https://doi.org/1…

Periodic composites with cohesive interfaces and matrix plasticity require nonlinear cell solutions in multiscale analysis. Process-zone condensation eliminates the linear elastic remainder of the cell by a Schur complement, retaining all interfacial and process-zone internal variables. Influence matrices recover macroscopic stress and consistent tangent. One back-substitution per increment checks that the matrix outside the retained zone remains elastic. While this holds, the reduction is exact relative to the full discretisation, also with a plastic matrix, and requires no training. In an E-glass/epoxy cell, eight of nine two-dimensional paths agree with the full cell to 1e-11 in stress and tangent; the check flags the ninth. Three paths on each of two three-dimensional meshes need zone expansion. Excluding setup and checks, two-dimensional path timings show an aggregate speed-up of 3.3; certified three-dimensional zones show none. In adaptive finite element squared (FE$^2$) simulations of a perforated plate, the reduced solver reproduces the full-cell response within solver tolerances, 1.51 times faster for glass/polypropylene and slower for glass/epoxy. Independent Ansys models agree to below 1e-3 in cell stress and about 0.6% in plate reactions, although local damage and plasticity onsets differ. The advantage depends on zone size, active set and adaptation costs.

0.39