CS Paper Radar

STC-MPM: Coupled Deformation, Progressive Damage, and Cut Formation in Soft-Tissue Cutting

Kewei Zuo, Jiahe Chen, Ziao Kuang, Junsheng Zhu, Etsuko Kobayashi

cs.RO ·submitted 2026-10-05 12:12 UTC · v1

Abstract

Cutting is a recurring operation in robotic au tomation, from food preparation to surgical tissue resection. For highly compliant targets, blade motion may deform or displace the material rather than advance the intended cut, while progressive failure changes load transfer and subsequent tool tissue interaction. A computational description must therefore connect cut formation to the evolving mechanical response, rather than specifying the incision independently of material failure. We present STC-MPM (Soft Tissue Cutting with the Material Point Method), a framework that couples finite-strain deformation, history-driven continuum damage, and configurable post-failure treatment. Damage initiates only when a tensile strain history exceeds a material threshold within the blade process zone. Progressive degradation changes stress transmission before the post-failure policy is applied, while the remaining tissue continues to deform, move, and interact with the tool. Numerical scalpel studies using delayed particle deactivation follow this response through insertion and withdrawal. Under identical blade motion, reducing the damage-rate limit leaves the first recorded damage time unchanged but delays and increases peak reaction force, delays particle deactivation, and increases the fixed-cohort displacement statistic at maximum insertion. The matched comparison illustrates how post-initiation failure evolution alters subsequent tool loading and recorded material motion. STC-MPM thus supports joint analysis of cut formation and accompanying tissue response without a pre-inserted cutting interface.

Closest papers

Nearest neighbours by meaning across the whole index.

BladeMaster: Real-Time Robotic Cutting Simulation with Online-Generated Persistent Discontinuities

cs.RO cs.GR ·2026-09-23 ·Zhanyu Yang, Yunuo Chen, Yanjia Huang, Joseph Masterjohn, Yin Yang +1 more
code/data similarity 0.65
Abstract

Cutting changes both the shape and topology of deformable objects, making accurate simulation challenging for robotic manipulation. A simulator must track the cutting tool as a cut develops, preserve the resulting discontinuities after tool withdrawal, and enable newly exposed surfaces to interact with the tool and with each other. Existing formulations often prescribe cut surfaces in advance or couple material separation to auxiliary geometric fields. We introduce BladeMaster, a GPU-accelerated cutting framework based on the total Lagrangian material point method (TLMPM). Our key idea is to encode the cutting history directly on material points through persistent side labels generated online from the blade geometry. These labels govern particle-grid coupling, preserving connectivity within intact material while preventing spurious coupling across cut faces after tool withdrawal. Our formulation supports progressive and intersecting cuts without predefined cut surfaces or particle duplication. Material-material contact enables cut surfaces to recontact and slide against each other without reconnecting, while two-way tool-material coupling allows material reaction forces to influence tool motion. Experiments demonstrate tool-driven cutting followed by manipulation, with faster-than-real-time performance on representative tasks. Project page: https://jango6324.github.io/blademaster/.

0.50

Mastering Multi-State Dynamics: Continuum Damage and Viscoplastic MPM for RL-Based Dexterous Manipulation

cs.GR ·2026-10-29 ·Yusen Feng, Shangbo Luan
similarity 0.61
Abstract

Robotic manipulation of multi-state materials needs a simulator that handles large deformation, topology change, and two-way contact between tools and materials while staying fast enough to drive online reinforcement learning. We present MG-CD-MPM, a tool-centered localized extension of CD-MPM. The implicit Ginzburg-Landau phase-field damage system is solved on a local patch by preconditioned conjugate gradients using a geometric-multigrid V-cycle as the preconditioner. The background MPM discretization remains uniform: only the damage solve is localized. Two-way rigid-tool coupling converts MPM contact impulses into forces and torques on the tool, exposing material resistance directly to the policy. The resulting Gym-like simulator covers soft solids, brittle materials, granular media, and viscoplastic or semi-fluid media within a unified per-particle constitutive layer. We demonstrate cutting, scooping, and shoveling in six scenes, combining scripted tool motions with PPO policies trained on two cutting tasks.

0.30

ProCut: Probabilistic Cutting Topology for Autonomous Electrosurgical Tissue Dissection

cs.RO ·2026-10-05 ·Xiao Liang, Fei Liu, Florian Richter, Genie Rubaiyat, Michael Yip
similarity 0.55
Abstract

Accurately modeling and tracking the deformation of soft tissue is critical for a wide range of interventional and surgical procedures. However, current methods struggle in scenarios involving topological changes, such as cutting and dissection, due to the inherent non-linearity and discontinuity introduced by explicit changes in connectivity. In this work, we present a novel, fully differentiable framework that enables robust estimation and modeling of topological changes during deformable tracking. Our method introduces a continuous, sigmoid-based formulation to smooth the otherwise discrete event of tissue cutting, making it amenable to gradient-based optimization within a differentiable Position-Based Dynamics (PBD) simulation. To account for uncertainty and improve robustness in the presence of noisy visual data, we incorporate Stein Variational Gradient Descent (SVGD) for particle-based probabilistic inference, generating multiple hypotheses for topological state estimation. Building on this foundation, we develop an autonomous dissection algorithm for thin-shell tissues that leverages topological updates to guide closed-loop cutting trajectory control. We evaluate our approach in both simulated and real-world electrosurgical environments, demonstrating significant improvements in topological estimation accuracy and dissection precision over existing methods. Our results highlight the potential of this framework to advance automation in soft-tissue surgical procedures by enabling reliable perception and control in the presence of complex structural changes.

0.16

Contact-Stable Deformable Tissue Simulation Using Implicit Integration and Live-Pose Grasp Constraints for Laparoscopic Surgery Robot Policy Evaluation

cs.RO ·2026-09-22 ·Juahn Oh, Dongho Yee, Jinseok Lee, Jiyul Lee, Yechan Seo +7 more
hot direction similarity 0.54
Abstract · Submitted to IEEE ICRA 2027

Closed-loop evaluation of surgical robots requires tissue that deforms, can be grasped and lifted, and reproduces the anatomy in which the robot will operate. We present a simulator in which this tissue is reconstructed from a fixed-view RGB-D recording of the surgical field, composited to remove the instruments, closed into watertight volumes and tetrahedralised; the pipeline was applied unchanged to three specimens of two species (thirteen organs, 146,061 tetrahedra, no inverted elements). For one specimen, the organs are placed in a bimanual cell in which two Franka FR3 arms operate motorised instruments through 6 mm trocars. The core contribution is the numerical and contact design that keeps this cell stable: implicit integration, simulation meshes separate from collision meshes, numerical guards, and a grasp constraint captured at the live tissue pose. In 45 repeated grasp-lifts, a friction grasp held the tissue in 0 of 15 trials and each constraint grasp in 13 of 15; on displaced tissue, a rest-pose constraint produced one-step snaps of up to 17.8 mm, which live-pose capture eliminates. Against the recording, front-surface depth error is 1.33 to 1.41 mm, organ silhouette IoU is 0.80, and in five grasp-lifts reproduced from video the landmark displacement RMSE is 11.8 mm against 14.2 mm for a static prediction. Biofidelity is not claimed; the environment is intended for closed-loop feasibility, safety, contact and policy screening.

0.32

Observation-Referenced Tissue Deformation Forecasting with Tool-Driven and Residual Dynamics

cs.RO ·2026-10-09 ·Tom Olesch, Nan Xiao, Xiongye Xiao, Jonathan C. DeLong, Fei Liu
similarity 0.51
Abstract · 8 pages, 6 figures, 1 table. Submitted to ICRA 2027

Forecasting tissue deformation from future instrument motion could support predictive planning and increasingly autonomous surgical systems. We study this problem using a scene-specific differentiable surface model fitted to an observed tool-tissue interaction window. Rather than forecasting absolute simulated positions, we introduce an \textit{observation-referenced} formulation that anchors each tissue point to its last valid observation and adds only the deformation induced by the known, preplanned future tool trajectory. This reduces sensitivity to reconstruction, initialization, and persistent simulation offsets while preserving the predicted deformation response. The physical model uses differentiable, mesh-free position-based dynamics with scene-specific rigidity, attachment, region scale, and grasp coupling. We further introduce an optional \textit{observation-referenced residual model} combining graph-spectral spatial modes with periodic harmonic dynamics for structured motion not explained by the tool input. We evaluate the framework retrospectively on 12 surgical manipulation clips from three datasets. Observation referencing provides the largest gain, with a median within-clip error ratio of $0.598$ relative to the corresponding absolute simulation forecast. The optional periodic residual further improves forecasting when the remaining motion exhibits periodic structure. These results support observation-referenced deformation prediction as a practical building block for future surgical world models, digital twins, and generative simulators that must predict how tissue evolves under instrument actions.

0.23

FORM: Robot Manipulation through Direct Material Law Identification

cs.RO ·2026-09-29 ·Stepan Tretiakov, Ruihan Zhao, Cheng-Hsi Hsiao, Xingjian Li, Adam Thorpe +4 more
code/data similarity 0.50
Abstract · 9 pages, 6 figures. Project page: https://form-robots.github.io/ . Code: https://github.com/form-robots/FORM

When interacting with an unfamiliar deformable material, a robot lacks prior knowledge of its physical properties and how it will respond to applied forces and motion. Rapid online identification is therefore essential for reliable manipulation. We present FORM (From Observed Response to Material laws), which identifies material properties from a single robot interaction and reuses the recovered model to plan manipulation under new actions and geometries. We use weak-form momentum balance to convert observed material motion and contact forces into linear equations in the unknown material parameters. These equations are assembled using the same material point method discretization as the forward simulator, so identification reduces to linear least-squares solves whose solutions can be used directly for prediction without refitting or conversion. Across four material classes, FORM reduces identification time from roughly 10--25 minutes for iterative baselines to 2--5 seconds, while maintaining competitive accuracy on new motions, initial conditions, and geometries. We demonstrate our approach in simulation and on hardware across four manipulation tasks: elastic rod insertion, golf putting with an elastic club, elastoplastic shaping, and target-volume pouring. In each task, the model identified from a single interaction is reused to plan new motions or manipulate a different geometry. FORM estimates elastic properties within 3.4% and elastoplastic properties within 2%, achieves 72.4--77.8% IoU in dough shaping, and keeps mean pouring error at 3.8 mL across target volumes of 60--160 mL.

0.31

Velocity Optimization via Thermal Imaging Enhances Autonomous Tumor Resection

cs.RO ·2026-10-20 ·Naveed D. Riaziat, Jiawei Ge, Ethan Kilmer, Michael W. Mikula, Paul Maria Scheikl +4 more
similarity 0.50
Abstract · submitted to IEEE Access

Objective: To demonstrate and evaluate THERMO, a thermal-velocity optimization algorithm for autonomous electrosurgery, in ex vivo porcine tissue using the UR10e-based ASTR system. Methods: Thermography for Electrosurgical Rate Modulation via Optimization (ThERMO), a closed-loop algorithm that uses real-time thermal imaging data to minimize thermal injury while ensuring accurate cut margins, was tested on ex vivo porcine tissue. Histological analysis was performed to detect thermal injury extent at a cellular level, and 3D photogrammetric measurement was used to verify margin accuracy. ThERMO's performance was compared against two previously used fixed velocity methods. Results: ThERMO outperformed both fixed velocity comparison methods without requiring data-driven training or iterative tuning, reducing thermal injury by up to 52%, improving cut accuracy by up to 59%, and maintaining task completion speed. Conclusions: Closed-loop thermal feedback via ThERMO improves autonomous robotic electrosurgery by simultaneously reducing thermal injury and improving margin accuracy, reinforcing its value over fixed velocity approaches for tumor resection applications. Significance: This work advances autonomous robotic tumor resection by demonstrating that real-time closed-loop thermal feedback control can substantially reduce collateral tissue damage and improve surgical margin accuracy.

0.23

Total Deformation-based MPM for Perfectly Elastic Solid Simulation with Strong Deformations

cs.GR ·2026-10-27 ·Timna Böttcher, Rick Ridder, Jan Bender
similarity 0.50
Abstract

We present a new MPM-based solver for perfectly elastic solids, which can recover from strong deformations and naturally allows contact handling. Typical MPM solvers suffer from numerical fracture, where objects break apart even when no plasticity is included in the elasticity model. Previous approaches for perfectly elastic solids solve this by computing forces on a fixed grid in the reference configuration. However, this makes them incompatible with standard collision handling methods. We instead propose a method for deformable solid simulation without numerical fracture, that still computes elastic forces on the current grid. Our method can easily include grid-based collision handling, as commonly used in MPM frameworks. Additionally, we compute the deformation directly from the particle positions and a fixed reference grid, without any updates based on velocity gradients. This facilitates the inclusion of particle-level collision handling and zero-energy mode suppression, which counteracts artifacts from non-linear deformations. As a result, we can efficiently simulate complex scenarios of elastic objects undergoing large deformations, including contact.

0.24