CS Paper Radar

BladeMaster: Real-Time Robotic Cutting Simulation with Online-Generated Persistent Discontinuities

Zhanyu Yang, Yunuo Chen, Yanjia Huang, Joseph Masterjohn, Yin Yang, Chenfanfu Jiang

cs.RO cs.GR ·submitted 2026-09-23 04:29 UTC · v2
code/data

Abstract

Cutting changes both the shape and topology of deformable objects, making accurate simulation challenging for robotic manipulation. A simulator must track the cutting tool as a cut develops, preserve the resulting discontinuities after tool withdrawal, and enable newly exposed surfaces to interact with the tool and with each other. Existing formulations often prescribe cut surfaces in advance or couple material separation to auxiliary geometric fields. We introduce BladeMaster, a GPU-accelerated cutting framework based on the total Lagrangian material point method (TLMPM). Our key idea is to encode the cutting history directly on material points through persistent side labels generated online from the blade geometry. These labels govern particle-grid coupling, preserving connectivity within intact material while preventing spurious coupling across cut faces after tool withdrawal. Our formulation supports progressive and intersecting cuts without predefined cut surfaces or particle duplication. Material-material contact enables cut surfaces to recontact and slide against each other without reconnecting, while two-way tool-material coupling allows material reaction forces to influence tool motion. Experiments demonstrate tool-driven cutting followed by manipulation, with faster-than-real-time performance on representative tasks. Project page: https://jango6324.github.io/blademaster/.

Closest papers

Nearest neighbours by meaning across the whole index.

Design for Machinability: Topology Optimization for Subtractive Machining Using Trimmed Neural Fields

cs.GR ·2026-10-11 ·Hongrui Chen, Levent Burak Kara
top venue similarity 0.69
Abstract

Topology optimization has found significant utility in additive manufacturing, but the resulting geometries are often difficult to realize using subtractive methods. The complex, curved surfaces of optimized designs typically require time-consuming point milling operations. In contrast, geometries composed of developable surfaces are well suited to flank milling, enabling substantial improvements in machining efficiency and surface quality. However, globally minimizing Gaussian curvature leads to overly simplistic designs. We address this challenge with a novel method that represents geometry using three implicit neural fields, optimized to produce machinable components. The resulting designs consist of regions of developable surfaces separated by seamlines where curvature is concentrated. Seamlines are efficiently computed as intersections of the implicit fields, while the geometry emerges through their product. By constraining surfaces to align with the cutter's normal or tangential direction, our approach further accommodates practical constraints of 3-axis machining. We demonstrate concurrent optimization of topology and Gaussian curvature, enabling control over seamline feature scale. Compared to methods that enforce subtractive machinability without considering milling efficiency, our approach consistently reduces machining time while maintaining competitive structural performance.

0.51

DexNinja: Learning Robust Dexterous Cutting Policy with a Real-to-Sim-to-Real Data Engine

cs.RO cs.CV ·2026-10-12 ·Haozhe Lou, Runyi Yang, Wanqi Zhong, Caiyun Liu, Yicheng Liu +8 more
similarity 0.68
Abstract

Cutting a piece of food looks effortless in human hands. For a robot, however, every cut is a high-contact interaction with a deformable, elasto-plastic object whose behavior changes with pose, contact mode, and cutting stage. Collecting real-world data is expensive and wasteful: each trial typically contaminates or damages the food, so obtaining scalable real world data for dexterous cutting is expensive and difficult. Simulation is an appealing alternative, but a large sim-to-real gap exists in both physics and perception. This gap is especially severe for topology-changing interactions like cutting, where small errors in contact, friction, or material and elasticity responses quickly compound. We propose \textsc{DexNinja}, a real2sim2real framework that turns a handful of real demonstrations into a dense and realistic training distribution. \textsc{DexNinja} (i) reconstructs object instances from real captures, (ii) randomizes physically meaningful parameters under category-level constraints, and (iii) produces augmented dexterous manipulation episodes using a custom differentiable simulator that couples robot dynamics, tactile contact, and deformable cutting. We evaluate \textsc{DexNinja} on a dexterous food-slicing task and show that (1) with tens of real demonstrations and hundreds of augmented simulator data, the success rate could reach more than 60\%. (2) the augmented data consistently improves success rates when only using real data with more than 20\% via sim-to-real, and (3) the resulting policies generalize to out-of-distribution objects with varying shapes and sizes.

0.37

MillBill: A Machining Agent with Geometric Feedback

cs.AI cs.CV ·2026-11-17 ·Gennadii Savrasov, Artem Slavin, Soslan Kabisov, Andrey Kuznetsov, Anton Konushin +1 more
code/data similarity 0.66
Abstract · 18 pages, 8 figures. Code: https://github.com/kulibinai/millbill

Turning a CAD model into a machining program requires both process knowledge and geometric precision. Language models can generate such workflows by writing geometry and toolpath code for each part, but this makes numerical execution part of the model's task. We introduce MillBill, an agent that separates machining decisions from their geometric execution and verification. Given a boundary-representation part, stock, and material, a locally hosted, mid-sized open model proposes operations and cutting parameters for indexed three-axis machining. A geometric harness generates toolpaths, simulates material removal, and returns feedback for plan refinement. Setup planning accounts for what the available cutters can physically reach, rather than visibility alone. We evaluate the resulting programs by the fraction of the target surface area within the specified tolerance after simulated machining. With Qwen3.8-27B, MillBill outperforms frontier-model approaches that construct their own geometry and toolpath workflows on the evaluated machining tasks. Code: https://github.com/kulibinai/millbill

0.63

STC-MPM: Coupled Deformation, Progressive Damage, and Cut Formation in Soft-Tissue Cutting

cs.RO ·2026-10-05 ·Kewei Zuo, Jiahe Chen, Ziao Kuang, Junsheng Zhu, Etsuko Kobayashi
similarity 0.65
Abstract

Cutting is a recurring operation in robotic au tomation, from food preparation to surgical tissue resection. For highly compliant targets, blade motion may deform or displace the material rather than advance the intended cut, while progressive failure changes load transfer and subsequent tool tissue interaction. A computational description must therefore connect cut formation to the evolving mechanical response, rather than specifying the incision independently of material failure. We present STC-MPM (Soft Tissue Cutting with the Material Point Method), a framework that couples finite-strain deformation, history-driven continuum damage, and configurable post-failure treatment. Damage initiates only when a tensile strain history exceeds a material threshold within the blade process zone. Progressive degradation changes stress transmission before the post-failure policy is applied, while the remaining tissue continues to deform, move, and interact with the tool. Numerical scalpel studies using delayed particle deactivation follow this response through insertion and withdrawal. Under identical blade motion, reducing the damage-rate limit leaves the first recorded damage time unchanged but delays and increases peak reaction force, delays particle deactivation, and increases the fixed-cohort displacement statistic at maximum insertion. The matched comparison illustrates how post-initiation failure evolution alters subsequent tool loading and recorded material motion. STC-MPM thus supports joint analysis of cut formation and accompanying tissue response without a pre-inserted cutting interface.

0.20

CNCGEN: A Dataset and Framework for Machining Process Planning and Toolpath Generation from B-rep Models

cs.LG ·2026-09-30 ·Xiaolei Zhou, Boyi Lin, Yuchao Feng, Jianwei Zheng
similarity 0.62
Abstract · 21 pages, including references and appendix

Learning to generate machining process plans and toolpaths from B-rep CAD requires coupling discrete operation decisions with continuous tool motion as the workpiece evolves. Correctly predicting an operation sequence does not by itself ensure correct material removal, because each toolpath acts on the stock left by preceding cuts. We formulate this problem around persistent manufacturing objects: object identity determines the target of an operation, while the evolving stock state conditions the generation of its toolpath. Based on this formulation, we propose CNCGEN, a dataset and learning framework for three-axis machining. CNCGEN-Dataset contains approximately 50k geometrically verified synthetic machining flows and 800 held-out real CNC records. Each flow aligns B-rep geometry with object-referenced operations, parameterized toolpaths, intermediate stock states, and verification outcomes, enabling supervision of the correspondence between planning decisions and their geometric effects. CNCGEN generates operations and toolpaths for selected objects step by step, updating a compact machining state to guide subsequent predictions. During training, a learned surrogate verifier provides material-removal feedback that links local predictions to their geometric consequences. Experiments on synthetic and held-out real CNC records show that CNCGEN improves the resulting workpiece geometry and reduces residual material and overcut compared with adapted CNC generation baselines.

0.47

RoboFin3D: A Sim-to-Real Platform for Robotic Surface Finishing

cs.RO ·2026-09-29 ·Haowei Wen, Shangtao Li, Vaibhav Sanjay, Philip Huang, Jiaoyang Li +1 more
published similarity 0.62
Abstract · Accepted for poster presentation at the IROS 2026 Workshop on Sim2Real and Classical Control: From Rigorous Theory to Data-Driven Robotics

Grinding and sanding are fundamental processes in industrial robotic surface finishing. However, physical trials are expensive and consume workpieces, making reproducible experiments difficult. We present RoboFin3D, a sim-to-real platform built on Isaac Sim and the Newton physics engine, that provides physics-based grinding and sanding simulation for cheap and repeatable robotic surface finishing experiments. RoboFin3D utilizes a signed distance field (SDF) to model the changing geometry of the workpiece, enabling contact computation, live updates and rendering without an intermediate mesh. It additionally uses a separate surface field to model progressive surface appearance change during sanding. We also introduce WeldGen, a weld sampling module, to generate weld beads on 8,918 real-world workpiece meshes for providing diverse simulation assets. The simulation parameters are calibrated on real experimental results and our evaluation demonstrates our simulation's fidelity against the real world. We also demonstrate that simulation-generated data can be used to improve the performance of perception models. Simulation-only fine-tuning of SAM2 improves IoU for segmentation of unsanded regions from 77.15% to 84.47%, while combined synthetic and real training reaches 97.41%.

0.27

FORM: Robot Manipulation through Direct Material Law Identification

cs.RO ·2026-09-29 ·Stepan Tretiakov, Ruihan Zhao, Cheng-Hsi Hsiao, Xingjian Li, Adam Thorpe +4 more
code/data similarity 0.62
Abstract · 9 pages, 6 figures. Project page: https://form-robots.github.io/ . Code: https://github.com/form-robots/FORM

When interacting with an unfamiliar deformable material, a robot lacks prior knowledge of its physical properties and how it will respond to applied forces and motion. Rapid online identification is therefore essential for reliable manipulation. We present FORM (From Observed Response to Material laws), which identifies material properties from a single robot interaction and reuses the recovered model to plan manipulation under new actions and geometries. We use weak-form momentum balance to convert observed material motion and contact forces into linear equations in the unknown material parameters. These equations are assembled using the same material point method discretization as the forward simulator, so identification reduces to linear least-squares solves whose solutions can be used directly for prediction without refitting or conversion. Across four material classes, FORM reduces identification time from roughly 10--25 minutes for iterative baselines to 2--5 seconds, while maintaining competitive accuracy on new motions, initial conditions, and geometries. We demonstrate our approach in simulation and on hardware across four manipulation tasks: elastic rod insertion, golf putting with an elastic club, elastoplastic shaping, and target-volume pouring. In each task, the model identified from a single interaction is reused to plan new motions or manipulate a different geometry. FORM estimates elastic properties within 3.4% and elastoplastic properties within 2%, achieves 72.4--77.8% IoU in dough shaping, and keeps mean pouring error at 3.8 mL across target volumes of 60--160 mL.

0.31

Mastering Multi-State Dynamics: Continuum Damage and Viscoplastic MPM for RL-Based Dexterous Manipulation

cs.GR ·2026-10-29 ·Yusen Feng, Shangbo Luan
published similarity 0.61
Abstract

Robotic manipulation of multi-state materials needs a simulator that handles large deformation, topology change, and two-way contact between tools and materials while staying fast enough to drive online reinforcement learning. We present MG-CD-MPM, a tool-centered localized extension of CD-MPM. The implicit Ginzburg-Landau phase-field damage system is solved on a local patch by preconditioned conjugate gradients using a geometric-multigrid V-cycle as the preconditioner. The background MPM discretization remains uniform: only the damage solve is localized. Two-way rigid-tool coupling converts MPM contact impulses into forces and torques on the tool, exposing material resistance directly to the policy. The resulting Gym-like simulator covers soft solids, brittle materials, granular media, and viscoplastic or semi-fluid media within a unified per-particle constitutive layer. We demonstrate cutting, scooping, and shoveling in six scenes, combining scripted tool motions with PPO policies trained on two cutting tasks.

0.38