CS Paper Radar

Mastering Multi-State Dynamics: Continuum Damage and Viscoplastic MPM for RL-Based Dexterous Manipulation

Yusen Feng, Shangbo Luan

cs.GR ·submitted 2026-10-29 13:05 UTC · v1

Abstract

Robotic manipulation of multi-state materials needs a simulator that handles large deformation, topology change, and two-way contact between tools and materials while staying fast enough to drive online reinforcement learning. We present MG-CD-MPM, a tool-centered localized extension of CD-MPM. The implicit Ginzburg-Landau phase-field damage system is solved on a local patch by preconditioned conjugate gradients using a geometric-multigrid V-cycle as the preconditioner. The background MPM discretization remains uniform: only the damage solve is localized. Two-way rigid-tool coupling converts MPM contact impulses into forces and torques on the tool, exposing material resistance directly to the policy. The resulting Gym-like simulator covers soft solids, brittle materials, granular media, and viscoplastic or semi-fluid media within a unified per-particle constitutive layer. We demonstrate cutting, scooping, and shoveling in six scenes, combining scripted tool motions with PPO policies trained on two cutting tasks.

Closest papers

Nearest neighbours by meaning across the whole index.

DAPPT: Domain-Aware Policies from Procedural Trajectories for Sim-to-Real Dexterous Tool Use

cs.RO ·2026-11-15 ·Beining Han, Jia Deng
similarity 0.66
Abstract

Sim-to-real RL has achieved impressive results in dexterous manipulation but remains limited to tasks with accurate rigid-body simulation. However, these methods cannot be applied to skills that involve deformable and particles, with which the simulation speed will become too slow for large-scale RL learning. We present DAPPT, a sim-to-real framework for end-to-end dexterous tool-use manipulation skills, e.g., sand scooping, play-dough rod-rolling, without simulating non-rigid materials. Our method learns a domain-aware RL policy by tracking procedural trajectories parameterized by domain parameters, and distills it into an end-to-end domain-aware sensorimotor policy. Furthermore, explicit domain represen-tation enables fast selection of domain parameters that can maximize downstream task performance. We evaluate DAPPT end-to-end on six dexterous manipulation tasks, including sand scooping, play-dough rod-rolling, sand scraping, mouse-wheel scrolling, dispenser pressing, and spray triggering. Our method achieves 1.5-3.8x in task metrics through the best domain parameter and transfers zero-shot to the real world.

0.10

FORM: Robot Manipulation through Direct Material Law Identification

cs.RO ·2026-09-29 ·Stepan Tretiakov, Ruihan Zhao, Cheng-Hsi Hsiao, Xingjian Li, Adam Thorpe +4 more
code/data similarity 0.63
Abstract · 9 pages, 6 figures. Project page: https://form-robots.github.io/ . Code: https://github.com/form-robots/FORM

When interacting with an unfamiliar deformable material, a robot lacks prior knowledge of its physical properties and how it will respond to applied forces and motion. Rapid online identification is therefore essential for reliable manipulation. We present FORM (From Observed Response to Material laws), which identifies material properties from a single robot interaction and reuses the recovered model to plan manipulation under new actions and geometries. We use weak-form momentum balance to convert observed material motion and contact forces into linear equations in the unknown material parameters. These equations are assembled using the same material point method discretization as the forward simulator, so identification reduces to linear least-squares solves whose solutions can be used directly for prediction without refitting or conversion. Across four material classes, FORM reduces identification time from roughly 10--25 minutes for iterative baselines to 2--5 seconds, while maintaining competitive accuracy on new motions, initial conditions, and geometries. We demonstrate our approach in simulation and on hardware across four manipulation tasks: elastic rod insertion, golf putting with an elastic club, elastoplastic shaping, and target-volume pouring. In each task, the model identified from a single interaction is reused to plan new motions or manipulate a different geometry. FORM estimates elastic properties within 3.4% and elastoplastic properties within 2%, achieves 72.4--77.8% IoU in dough shaping, and keeps mean pouring error at 3.8 mL across target volumes of 60--160 mL.

0.31

Physical Diffusion Policy via MPM-Guided 3D Gaussian Simulation

cs.RO ·2026-11-03 ·Can Wang, Qiyuan Qiao, Lei Liu, Ge Yuan, Xinhui Liu +1 more
similarity 0.62
Abstract · 10 pages

Learning robust manipulation policies for diverse everyday objects remains challenging because objects with different materials exhibit distinct deformation and contact dynamics. While diffusion policies provide a powerful framework for modeling multimodal manipulation behaviors, they typically lack explicit physical reasoning and may produce averaged actions when facing heterogeneous objects. We present a physics-aware diffusion policy that augments visual imitation learning with object physical understanding. Our framework recovers material properties from visual demonstrations by coupling 3D Gaussian Splatting with differentiable Material Point Method simulation, where video guidance and particle-level constraints enable accurate physical parameter estimation. The estimated physics conditions are further integrated into a material-aware Mixture-of-Experts diffusion policy, allowing adaptive behavior generation across different physical regimes. For practical deployment, we introduce a physics memory bank that provides efficient physical retrieval without requiring online simulation optimization. Experiments on a wide range of simulated and real-world objects demonstrate improved manipulation success and generalization over existing diffusion-based approaches. These results show that incorporating physical knowledge is critical for scalable robot manipulation in diverse environments.

0.13

BladeMaster: Real-Time Robotic Cutting Simulation with Online-Generated Persistent Discontinuities

cs.RO cs.GR ·2026-09-23 ·Zhanyu Yang, Yunuo Chen, Yanjia Huang, Joseph Masterjohn, Yin Yang +1 more
code/data similarity 0.61
Abstract

Cutting changes both the shape and topology of deformable objects, making accurate simulation challenging for robotic manipulation. A simulator must track the cutting tool as a cut develops, preserve the resulting discontinuities after tool withdrawal, and enable newly exposed surfaces to interact with the tool and with each other. Existing formulations often prescribe cut surfaces in advance or couple material separation to auxiliary geometric fields. We introduce BladeMaster, a GPU-accelerated cutting framework based on the total Lagrangian material point method (TLMPM). Our key idea is to encode the cutting history directly on material points through persistent side labels generated online from the blade geometry. These labels govern particle-grid coupling, preserving connectivity within intact material while preventing spurious coupling across cut faces after tool withdrawal. Our formulation supports progressive and intersecting cuts without predefined cut surfaces or particle duplication. Material-material contact enables cut surfaces to recontact and slide against each other without reconnecting, while two-way tool-material coupling allows material reaction forces to influence tool motion. Experiments demonstrate tool-driven cutting followed by manipulation, with faster-than-real-time performance on representative tasks. Project page: https://jango6324.github.io/blademaster/.

0.50

STC-MPM: Coupled Deformation, Progressive Damage, and Cut Formation in Soft-Tissue Cutting

cs.RO ·2026-10-05 ·Kewei Zuo, Jiahe Chen, Ziao Kuang, Junsheng Zhu, Etsuko Kobayashi
similarity 0.61
Abstract

Cutting is a recurring operation in robotic au tomation, from food preparation to surgical tissue resection. For highly compliant targets, blade motion may deform or displace the material rather than advance the intended cut, while progressive failure changes load transfer and subsequent tool tissue interaction. A computational description must therefore connect cut formation to the evolving mechanical response, rather than specifying the incision independently of material failure. We present STC-MPM (Soft Tissue Cutting with the Material Point Method), a framework that couples finite-strain deformation, history-driven continuum damage, and configurable post-failure treatment. Damage initiates only when a tensile strain history exceeds a material threshold within the blade process zone. Progressive degradation changes stress transmission before the post-failure policy is applied, while the remaining tissue continues to deform, move, and interact with the tool. Numerical scalpel studies using delayed particle deactivation follow this response through insertion and withdrawal. Under identical blade motion, reducing the damage-rate limit leaves the first recorded damage time unchanged but delays and increases peak reaction force, delays particle deactivation, and increases the fixed-cohort displacement statistic at maximum insertion. The matched comparison illustrates how post-initiation failure evolution alters subsequent tool loading and recorded material motion. STC-MPM thus supports joint analysis of cut formation and accompanying tissue response without a pre-inserted cutting interface.

0.20

DexNinja: Learning Robust Dexterous Cutting Policy with a Real-to-Sim-to-Real Data Engine

cs.RO cs.CV ·2026-10-12 ·Haozhe Lou, Runyi Yang, Wanqi Zhong, Caiyun Liu, Yicheng Liu +8 more
similarity 0.60
Abstract

Cutting a piece of food looks effortless in human hands. For a robot, however, every cut is a high-contact interaction with a deformable, elasto-plastic object whose behavior changes with pose, contact mode, and cutting stage. Collecting real-world data is expensive and wasteful: each trial typically contaminates or damages the food, so obtaining scalable real world data for dexterous cutting is expensive and difficult. Simulation is an appealing alternative, but a large sim-to-real gap exists in both physics and perception. This gap is especially severe for topology-changing interactions like cutting, where small errors in contact, friction, or material and elasticity responses quickly compound. We propose \textsc{DexNinja}, a real2sim2real framework that turns a handful of real demonstrations into a dense and realistic training distribution. \textsc{DexNinja} (i) reconstructs object instances from real captures, (ii) randomizes physically meaningful parameters under category-level constraints, and (iii) produces augmented dexterous manipulation episodes using a custom differentiable simulator that couples robot dynamics, tactile contact, and deformable cutting. We evaluate \textsc{DexNinja} on a dexterous food-slicing task and show that (1) with tens of real demonstrations and hundreds of augmented simulator data, the success rate could reach more than 60\%. (2) the augmented data consistently improves success rates when only using real data with more than 20\% via sim-to-real, and (3) the resulting policies generalize to out-of-distribution objects with varying shapes and sizes.

0.37

RoboKit: Accelerating Parallel Differentiable Optimization for Robot Learning

cs.RO cs.AIcs.LG ·2026-11-15 ·Jianglong Ye, Xuanbin Peng, Conor Mc Gartoll, Changwei Jing, Lai Wei +3 more
publishedcode/data similarity 0.59
Abstract · Accepted to CoRL 2026. Project page: https://openrobokit.com/robokit

We present RoboKit, a high-performance, general-purpose toolkit for parallel differentiable optimization in robotics, built on three principles: (i) Performance and flexibility: GPU-parallel multi-seed solvers pair sampling with versatile optimizers, running 2-60$\times$ faster than task-specific baselines across seven tasks; (ii) Geometry, rendering and physics: hybrid and coarse-to-fine representations accelerate collision, differentiable rendering and simulation, optimizing 4096 grasps in 2.97 s; (iii) Integration with learning: costs are differentiable and simulation is parallel, so RoboKit both distills optimization into policies and trains RL; distilled policies run 9-240$\times$ faster at comparable accuracy, and RL reaches a GPU baseline's scores up to 2.1$\times$ sooner on the same simulator.

0.33

Learning Multi-Phase Robot Loco-Manipulation via Phase-Conditioned Policy Optimization

cs.RO ·2026-10-26 ·Simone Manni, Annika Wollschläger, Dario Bellicoso, Abel Gawel, Marco Hutter +2 more
similarity 0.59
Abstract

Complex whole-body loco-manipulation requires executing diverse maneuvers, such as crouching, grasping, and locomotion, within a single long-horizon task. While performing simple pick-and-place behaviors is well-established, scaling to complex, long-horizon tasks remains difficult. Currently, this challenge is addressed by relying on human motion data and correspondingly humanoid platforms, which limits platform independence and introduces substantial data processing overhead. Instead, we extend proximal policy optimization (PPO) to train a single policy for multi-phase tasks across diverse robotic hardware, leveraging prior task structure to shape behavior. Our method adapts PPO using a phase-conditioned critic, phase-gated reward functions, and a multi-phase reset curriculum to guide exploration. To support varied hardware, we employ a decoupled hierarchical control architecture that separates lower-level balancing dynamics from high-level phase execution. We demonstrate multi-stage loco-manipulation skills on hardware on both the Unitree G1 and a Boston Dynamics Spot equipped with a manipulator arm, and validate our design choices through ablations. Our approach enables the acquisition of complex loco-manipulation behaviors purely through environment interaction while directly incorporating high-level task structure into policy learning.

0.17