CS Paper Radar

Finite Element Modeling of Fracture in Brittle Foods with Physically Consistent Parameter Calibration: A Practical Case Study on Cooled Dark Chocolate

Patrick Kurzeja, Felix Rörentrop, Kai Langenfeld, Jörn Mosler

cs.CE ·submitted 2026-10-27 12:22 UTC · v1
theory

Abstract

Fracture in food can be undesired during production and transportation but also intended during cutting, grinding or mastication. The associated peak load, the deformation at failure and the resulting fragment geometry are all product properties. This work condenses the modeling of such fracture into a physically rigorous recipe that considers the practical constraints imposed by finite element simulations where necessary and applies idealized theoretical assessments where applicable. Cooled dark chocolate serves as a reproducible model material. Two well-established modeling frameworks for Griffith-type brittle fracture are assessed at an affordable spatial discretization: a sharp-interface and a diffuse phase-field approach. The assessment covers the choice of numerical framework, its discretization and a staged identification of the model parameters. Each parameter is identified from the loading stage that governs it: elastic parameters from pre-crack tension and compression, critical energy release rate from three-point-bending peak force, and the phase-field width last. The phase-field width interferes with the structural response, crack curvature and stress fields, depending on its lower bound set by the affordable spatial resolution. Elastic slope, peak force and crack path therefore cannot be met practically by a single parameter set. The objective must be fixed for the calibration of the model parameters and reported together with the numerical parameters and the boundary value problem.

Closest papers

Nearest neighbours by meaning across the whole index.

A mesh-free deep energy method for phase-field modeling of thermally driven brittle fracture

cs.LG cond-mat.mtrl-sci ·2026-11-13 ·Han Zhang, Mehrisadat Makki Alamdari, Babak Shahbodagh, Mohammad Vahab, Cosmin Anitescu +2 more
benchmark similarity 0.57
Abstract · 48 pages, 18 figures, 15 tables

Phase-field simulation of thermally driven fracture requires resolving localized crack bands whose paths are unknown in advance and thermal boundary layers whose thickness evolves during the transient. Neural energy-based computations of thermal fracture have so far started from defects placed in advance. This paper proposes a mesh-free deep energy method based on multiresolution neural representations that predicts spontaneous crack nucleation, crack spacing, and selective crack propagation and arrest under transient thermal loading. Two networks, each with its own multiresolution encoding, represent the displacement and phase fields and the transient temperature, and the mechanical energy and the incremental functional of the backward Euler heat equation are estimated on integration points redrawn at every iteration. Restricting irreversibility to the crack set, carrying the optimizer state across load steps and decaying the learning rates within each step help prevent spurious damage accumulation. On two notched plates the initiation peak loads agree closely with an independent finite element reference. On a quenched glass strip under an analytical temperature field the crack path changes from straight to oscillatory and then to branched, with an oscillation threshold close to the linear stability prediction. Under a prescribed boundary temperature a quenched ceramic slab forms a crack array of the type observed in experiment, with a spacing close to that of a published benchmark. On the slab and a quenched annulus the arrays are denser than those of a finite element computation on the same material field. No crack paths, nucleation sites or crack-adapted meshes are prescribed.

0.19

An improved bond-associated peridynamic model and its adaptive coupling with CCM for fracture analysis

cs.CE ·2026-08-12 ·Wenping Han, Bowen Sun, Shankun Liu, Fei Han
similarity 0.53
Abstract

This paper reformulates the correction factor in the force-state of the bond-associated peridynamic (BAPD) model. The reformulation is established from the strain energy density equivalence between the BAPD model and the classical continuum mechanics (CCM) model at a material point. With the FEM solution taken as the reference, the proposed correction factor improves the accuracy of the BAPD solution in this study. Furthermore, a BAPD-CCM coupled model is developed based on the above energy density equivalence, and a ``Morphing" function is introduced to achieve a smooth transition between the two models. For time integration, explicit schemes are adopted for both quasi-static and dynamic problems. In the spatial discretization, the CCM model is discretized by elements, whereas the BAPD model is discretized by particles. The solution accuracy of the coupled model is validated by comparison with the FEM solution and by evaluating the $L^{2}$ norm, the $H^{1}_{\mathrm{semi}}$, and the energy norm of the displacement error. Two- and three-dimensional numerical examples show that the proposed model has higher computational efficiency. For example, in the Mode I crack propagation problem, its computational cost is reduced by more than 72\% compared with that of the pure BAPD model, and the predicted crack patterns agree with experimental results.

0.04

Solution Strategies for Dissolution-Driven Phase-Field Fracture in Geomaterials

cs.CE ·2026-10-28 ·Maithah M. Alaleeli, Mohamed Elkhodbia, Mostafa E. Mobasher
unusual similarity 0.52
Abstract

Dissolution-driven fracture governs the long-term integrity of geological CO2 storage, geothermal reservoirs, and nuclear waste repositories. Modeling it requires solving strongly coupled mechanical, chemical, and phase-field equations. The solver choice controls their accuracy, cost, and convergence. This study investigates the role of solution strategies in dissolution-driven fracture in geomaterials. The coupled model is implemented in Abaqus user-element (UEL) subroutines, with all tangent blocks derived analytically. Five solvers are compared: (1) block-diagonal Newton monolithic, (2) BFGS quasi-Newton monolithic, (3) single-pass fully staggered, (4) single-pass partially staggered, and (5) hybrid multi-pass fully staggered. Performance is quantified by accuracy (errors in peak load, peak and failure displacements, and local CO2 concentration), cost (CPU and wall-clock times), and robustness, measured by new factors that assess convergence over the whole simulation and capture iteration spikes. The solvers are tested on mechanical and chemo-mechanical tension, shear, and multiple-crack benchmarks, including CO2 diffusivities raised up to a thousandfold. The results reveal a clear trade-off between accuracy, cost, and robustness. The quasi-Newton solver matches the Newton reference at a fraction of its cost but can fail under intense transport. The single-pass fully staggered solver is inexpensive and always completes, but its post-peak response depends strongly on the time step. The hybrid multi-pass solver also always completes, retains near-reference accuracy, and avoids iteration spikes at moderate cost. The partially staggered solver is the least robust. These findings guide practical selection: the single-pass staggered solver suits rapid screening, quasi-Newton offers accuracy when convergent, and hybrid multi-pass provides the best balance.

0.28

A mesh-free multiresolution deep energy method with phase-field modeling of brittle fracture

cs.LG math.NA ·2026-08-25 ·Han Zhang, Mehrisadat Makki Alamdari, Babak Shahbodagh, Mohammad Vahab, Cosmin Anitescu +2 more
benchmark similarity 0.50
Abstract

Phase-field modeling of brittle fracture removes the need to track cracks explicitly by recasting their evolution as the minimization of an energy functional. In return it requires a discretization dense enough to resolve a localization band whose width is set by a regularization length and whose path is not known in advance. We propose a mesh-free discretization in which a single neural network represents the displacement and phase fields and is trained by minimizing the incremental energy directly. The coordinates enter the network through a multiresolution feature encoding built from $C^1$ quadratic B-spline grids, so the finest scale the representation can express is set by choice rather than reached through slow training, and the energy is estimated by stratified Monte Carlo integration on points redrawn at every optimizer iteration. This pairing proves critical, since the crack fails to advance both when the integration points are held fixed and when the encoding is too coarse to represent the band, while each ingredient tolerates a wide range of settings once the other is in place. Because the representation is globally $C^1$, the second- and the fourth-order fracture energy densities run on the identical discretization. Across six problems, from single-edge-notched tension and shear to a thick-walled ring on a single spline patch, the computed load-displacement curves follow staggered finite element references at matched regularization length, with peak loads within about 1% on the single-edge-notched tests and within 8% where the crack pattern changes topology. On a public benchmark dataset of random multi-crack configurations the method classifies the active or dormant state of 90% of the seeded cracks in twenty zero-shot runs, where the deep Ritz baseline of the dataset authors fails.

0.51

An extended deep energy method for thermo-mechanical crack propagation

cs.LG cond-mat.mtrl-scimath.NA ·2026-10-07 ·Han Zhang, Mehrisadat Makki Alamdari, Babak Shahbodagh, Mohammad Vahab, Cosmin Anitescu +2 more
similarity 0.49
Abstract · 48 pages, 20 figures, 10 tables

Thermo-mechanical fracture couples transient heat conduction on a cracked domain with a crack that grows as the temperature and the displacement evolve. Neural energy solvers have been proposed for phase-field fracture and later extended to represent a sharp crack through the network input, but heat conduction on the cracked domain and crack propagation under the resulting thermal stresses have not yet been treated together in these solvers. We present an extended deep energy method for thermo-mechanical crack propagation in which the crack remains a sharp polyline. Two networks represent the temperature and the displacement and receive the crack through a scalar embedding function, discontinuous across the crack and smooth elsewhere, so that both fields can jump across it without a regularization length, and the displacement is enriched near the tip by the Williams expansion with trainable amplitudes. The two fields are obtained by minimizing an incremental conduction functional and the thermoelastic potential energy in a staggered sequence, with Monte Carlo integration on points stratified over background elements, densified near the tip and redrawn during training. The stress intensity factors are extracted by the interaction integral with the area term of Wilson and Yu and checked by a sweep of the contour radius, and the crack advances at the maximum hoop stress angle when the energy release rate of the kink reaches the critical value at the crack-tip temperature. On a stationary thermal edge crack the extracted stress intensity factor agrees with the published value to 0.11%, in a functionally graded shear test initiation agrees with an independent sharp-crack finite element solution to within one load step, and on a notched cruciform specimen the crack paths follow the published solutions under mechanical, thermal and combined loading.

0.46

Fracture-Bench: A Controlled Benchmark Suite for Machine Learning Surrogates in Phase-Field Fracture Mechanics

cs.CE physics.comp-ph ·2026-11-02 ·Meenu Krishnan U., Maryam Hakimzadeh, Indrashish Saha, Meer Mehran Rashid, Lori Graham-Brady +1 more
benchmark similarity 0.49
Abstract · 38 pages, 15 Figues

Machine-learning surrogates are increasingly proposed to replace phase-field fracture simulations in many-query tasks such as uncertainty quantification, inverse analysis and design. Little controlled evidence shows which architectures are reliable, for which fracture problems and how far beyond their training data. We introduce Fracture-Bench, an open benchmark of two phase-field datasets with fixed splits, common test metrics and a description of each dataset's physical regime. Dataset~1 contains 1,000 AT2 simulations of multiple cracks growing from a notched hole in a hyperelastic plate under random non-uniform biaxial boundary displacements (44 load steps, $128\times128$ grid). Dataset~2 contains 4,000 PF-CZM simulations of a pre-cracked plate with two inclusions, each ten times stiffer or more compliant than the matrix ($128\times256$ grid). We train a Fourier neural operator (FNO), DeepONet, Latent DeepONet, a UNet and a conditional diffusion model on identical splits and compare one test metric per dataset, training time, inference time and model size. On Dataset~1, FNO and Latent DeepONet attain mean test errors of order $10^{-6}$, about ten times lower than UNet and DeepONet. On Dataset~2, the diffusion model is most accurate, with about one sixth of the UNet error, but requires \SI{706}{s} per prediction versus \SI{6}{ms} for UNet. For all architectures, most of the error occurs in the final load steps, after crack localization. Dataset~2 contains initial cracks less than one grid cell apart that produce qualitatively different paths. Architecture rankings therefore depend on the task, and errors averaged over densely sampled inputs reveal little about near-bifurcation cases. Data, codes, splits, regime descriptors and generalization splits are public, with a protocol for adding under-represented regimes such as mixed-mode, three-dimensional and experimentally paired fracture.

0.21

Learning from fracture: Teaching language models to design through physical experience

cs.AI cond-mat.mtrl-scics.LG ·2026-10-13 ·Bo Ni
similarity 0.45
Abstract · 21 pages, 7 figures, 3 tables. Includes Supplementary Materials

How can language models learn to optimize physical designs through experience? We introduce FracLearn, an experience-abstraction-generalization framework evaluated through a deliberately unfamiliar, Tetris-inspired fracture game. The model first proposes architectures and examines simulated fracture responses to accumulate experience. Abstraction organizes these observations into conditional principles linking reinforcement placement, crack evolution and load transfer, with supporting evidence and failure conditions. Generalization challenges the model to combine these principles in new architectures and surpass the earlier design record. Campaigns demonstrate progressive refinement and recovery through hypothesis revision, yielding a best composite score 11.0% above the experience-stage record. Fracture analyses connect improved performance to crack deflection and temporary trapping as toughening mechanisms, alongside greater residual load capacity. Learning occurs through external knowledge and decisions, without model-weight updates. This approach offers a route to scientific agents that turn computational experiments into reusable physical knowledge for materials discovery and engineering design.

0.28

STC-MPM: Coupled Deformation, Progressive Damage, and Cut Formation in Soft-Tissue Cutting

cs.RO ·2026-10-05 ·Kewei Zuo, Jiahe Chen, Ziao Kuang, Junsheng Zhu, Etsuko Kobayashi
similarity 0.44
Abstract

Cutting is a recurring operation in robotic au tomation, from food preparation to surgical tissue resection. For highly compliant targets, blade motion may deform or displace the material rather than advance the intended cut, while progressive failure changes load transfer and subsequent tool tissue interaction. A computational description must therefore connect cut formation to the evolving mechanical response, rather than specifying the incision independently of material failure. We present STC-MPM (Soft Tissue Cutting with the Material Point Method), a framework that couples finite-strain deformation, history-driven continuum damage, and configurable post-failure treatment. Damage initiates only when a tensile strain history exceeds a material threshold within the blade process zone. Progressive degradation changes stress transmission before the post-failure policy is applied, while the remaining tissue continues to deform, move, and interact with the tool. Numerical scalpel studies using delayed particle deactivation follow this response through insertion and withdrawal. Under identical blade motion, reducing the damage-rate limit leaves the first recorded damage time unchanged but delays and increases peak reaction force, delays particle deactivation, and increases the fixed-cohort displacement statistic at maximum insertion. The matched comparison illustrates how post-initiation failure evolution alters subsequent tool loading and recorded material motion. STC-MPM thus supports joint analysis of cut formation and accompanying tissue response without a pre-inserted cutting interface.

0.20