CS Paper Radar

Solution Strategies for Dissolution-Driven Phase-Field Fracture in Geomaterials

Maithah M. Alaleeli, Mohamed Elkhodbia, Mostafa E. Mobasher

cs.CE ·submitted 2026-10-28 07:06 UTC · v2
unusual

Abstract

Dissolution-driven fracture governs the long-term integrity of geological CO2 storage, geothermal reservoirs, and nuclear waste repositories. Modeling it requires solving strongly coupled mechanical, chemical, and phase-field equations. The solver choice controls their accuracy, cost, and convergence. This study investigates the role of solution strategies in dissolution-driven fracture in geomaterials. The coupled model is implemented in Abaqus user-element (UEL) subroutines, with all tangent blocks derived analytically. Five solvers are compared: (1) block-diagonal Newton monolithic, (2) BFGS quasi-Newton monolithic, (3) single-pass fully staggered, (4) single-pass partially staggered, and (5) hybrid multi-pass fully staggered. Performance is quantified by accuracy (errors in peak load, peak and failure displacements, and local CO2 concentration), cost (CPU and wall-clock times), and robustness, measured by new factors that assess convergence over the whole simulation and capture iteration spikes. The solvers are tested on mechanical and chemo-mechanical tension, shear, and multiple-crack benchmarks, including CO2 diffusivities raised up to a thousandfold. The results reveal a clear trade-off between accuracy, cost, and robustness. The quasi-Newton solver matches the Newton reference at a fraction of its cost but can fail under intense transport. The single-pass fully staggered solver is inexpensive and always completes, but its post-peak response depends strongly on the time step. The hybrid multi-pass solver also always completes, retains near-reference accuracy, and avoids iteration spikes at moderate cost. The partially staggered solver is the least robust. These findings guide practical selection: the single-pass staggered solver suits rapid screening, quasi-Newton offers accuracy when convergent, and hybrid multi-pass provides the best balance.

Closest papers

Nearest neighbours by meaning across the whole index.

Finite Element Modeling of Fracture in Brittle Foods with Physically Consistent Parameter Calibration: A Practical Case Study on Cooled Dark Chocolate

cs.CE ·2026-10-27 ·Patrick Kurzeja, Felix Rörentrop, Kai Langenfeld, Jörn Mosler
theory similarity 0.52
Abstract

Fracture in food can be undesired during production and transportation but also intended during cutting, grinding or mastication. The associated peak load, the deformation at failure and the resulting fragment geometry are all product properties. This work condenses the modeling of such fracture into a physically rigorous recipe that considers the practical constraints imposed by finite element simulations where necessary and applies idealized theoretical assessments where applicable. Cooled dark chocolate serves as a reproducible model material. Two well-established modeling frameworks for Griffith-type brittle fracture are assessed at an affordable spatial discretization: a sharp-interface and a diffuse phase-field approach. The assessment covers the choice of numerical framework, its discretization and a staged identification of the model parameters. Each parameter is identified from the loading stage that governs it: elastic parameters from pre-crack tension and compression, critical energy release rate from three-point-bending peak force, and the phase-field width last. The phase-field width interferes with the structural response, crack curvature and stress fields, depending on its lower bound set by the affordable spatial resolution. Elastic slope, peak force and crack path therefore cannot be met practically by a single parameter set. The objective must be fixed for the calibration of the model parameters and reported together with the numerical parameters and the boundary value problem.

0.27

A mesh-free deep energy method for phase-field modeling of thermally driven brittle fracture

cs.LG cond-mat.mtrl-sci ·2026-11-13 ·Han Zhang, Mehrisadat Makki Alamdari, Babak Shahbodagh, Mohammad Vahab, Cosmin Anitescu +2 more
benchmark similarity 0.48
Abstract · 48 pages, 18 figures, 15 tables

Phase-field simulation of thermally driven fracture requires resolving localized crack bands whose paths are unknown in advance and thermal boundary layers whose thickness evolves during the transient. Neural energy-based computations of thermal fracture have so far started from defects placed in advance. This paper proposes a mesh-free deep energy method based on multiresolution neural representations that predicts spontaneous crack nucleation, crack spacing, and selective crack propagation and arrest under transient thermal loading. Two networks, each with its own multiresolution encoding, represent the displacement and phase fields and the transient temperature, and the mechanical energy and the incremental functional of the backward Euler heat equation are estimated on integration points redrawn at every iteration. Restricting irreversibility to the crack set, carrying the optimizer state across load steps and decaying the learning rates within each step help prevent spurious damage accumulation. On two notched plates the initiation peak loads agree closely with an independent finite element reference. On a quenched glass strip under an analytical temperature field the crack path changes from straight to oscillatory and then to branched, with an oscillation threshold close to the linear stability prediction. Under a prescribed boundary temperature a quenched ceramic slab forms a crack array of the type observed in experiment, with a spacing close to that of a published benchmark. On the slab and a quenched annulus the arrays are denser than those of a finite element computation on the same material field. No crack paths, nucleation sites or crack-adapted meshes are prescribed.

0.19

A Highly Efficient Depth-Averaged Material Point Method for Geophysical Mass Flows

cs.CE ·2026-10-23 ·Johann Kammholz, Yidong Zhao, Lars Blatny, Thomas Pauze, Johan Gaume
code/data similarity 0.47
Abstract

Probabilistic hazard assessment of geophysical mass flows requires large simulation ensembles and thus fast and robust numerical models. We present an open-source depth-averaged material point method formulated in global Cartesian coordinates, using Lagrangian particles to track the flow margin. A separate basal friction step based on the Coulomb, Voellmy, or $μ(I)$-rheology brings the flow to rest without artificial stopping criteria. Our model reproduces analytical solutions for a sliding block and dam-break problems and matches the deposit of a laboratory granular column collapse. A back-calculation of the 2023 Brienz/Brinzauls rockslide (Switzerland) at 1m resolution (190'000 particles) runs faster than real time on a single CPU core. Calibrated to the observed runout, the three friction laws yield very similar results, but Coulomb friction shows a slightly wider affected area than Voellmy and $μ(I)$. A probabilistic 1632-simulation ensemble at 5m resolution was computed in 76s. The model is one to two orders of magnitude faster than established depth-averaged models used in engineering practice, making catchment-style ensemble simulations feasible on a desktop computer.

0.35

Fracture-Bench: A Controlled Benchmark Suite for Machine Learning Surrogates in Phase-Field Fracture Mechanics

cs.CE physics.comp-ph ·2026-11-02 ·Meenu Krishnan U., Maryam Hakimzadeh, Indrashish Saha, Meer Mehran Rashid, Lori Graham-Brady +1 more
benchmark similarity 0.44
Abstract · 38 pages, 15 Figues

Machine-learning surrogates are increasingly proposed to replace phase-field fracture simulations in many-query tasks such as uncertainty quantification, inverse analysis and design. Little controlled evidence shows which architectures are reliable, for which fracture problems and how far beyond their training data. We introduce Fracture-Bench, an open benchmark of two phase-field datasets with fixed splits, common test metrics and a description of each dataset's physical regime. Dataset~1 contains 1,000 AT2 simulations of multiple cracks growing from a notched hole in a hyperelastic plate under random non-uniform biaxial boundary displacements (44 load steps, $128\times128$ grid). Dataset~2 contains 4,000 PF-CZM simulations of a pre-cracked plate with two inclusions, each ten times stiffer or more compliant than the matrix ($128\times256$ grid). We train a Fourier neural operator (FNO), DeepONet, Latent DeepONet, a UNet and a conditional diffusion model on identical splits and compare one test metric per dataset, training time, inference time and model size. On Dataset~1, FNO and Latent DeepONet attain mean test errors of order $10^{-6}$, about ten times lower than UNet and DeepONet. On Dataset~2, the diffusion model is most accurate, with about one sixth of the UNet error, but requires \SI{706}{s} per prediction versus \SI{6}{ms} for UNet. For all architectures, most of the error occurs in the final load steps, after crack localization. Dataset~2 contains initial cracks less than one grid cell apart that produce qualitatively different paths. Architecture rankings therefore depend on the task, and errors averaged over densely sampled inputs reveal little about near-bifurcation cases. Data, codes, splits, regime descriptors and generalization splits are public, with a protocol for adding under-represented regimes such as mixed-mode, three-dimensional and experimentally paired fracture.

0.21

A mesh-free multiresolution deep energy method with phase-field modeling of brittle fracture

cs.LG math.NA ·2026-08-25 ·Han Zhang, Mehrisadat Makki Alamdari, Babak Shahbodagh, Mohammad Vahab, Cosmin Anitescu +2 more
benchmark similarity 0.44
Abstract

Phase-field modeling of brittle fracture removes the need to track cracks explicitly by recasting their evolution as the minimization of an energy functional. In return it requires a discretization dense enough to resolve a localization band whose width is set by a regularization length and whose path is not known in advance. We propose a mesh-free discretization in which a single neural network represents the displacement and phase fields and is trained by minimizing the incremental energy directly. The coordinates enter the network through a multiresolution feature encoding built from $C^1$ quadratic B-spline grids, so the finest scale the representation can express is set by choice rather than reached through slow training, and the energy is estimated by stratified Monte Carlo integration on points redrawn at every optimizer iteration. This pairing proves critical, since the crack fails to advance both when the integration points are held fixed and when the encoding is too coarse to represent the band, while each ingredient tolerates a wide range of settings once the other is in place. Because the representation is globally $C^1$, the second- and the fourth-order fracture energy densities run on the identical discretization. Across six problems, from single-edge-notched tension and shear to a thick-walled ring on a single spline patch, the computed load-displacement curves follow staggered finite element references at matched regularization length, with peak loads within about 1% on the single-edge-notched tests and within 8% where the crack pattern changes topology. On a public benchmark dataset of random multi-crack configurations the method classifies the active or dormant state of 90% of the seeded cracks in twenty zero-shot runs, where the deep Ritz baseline of the dataset authors fails.

0.51

A $u$-$p_w$ SPH framework with mechanical-hydraulic boundary treatment in GeoDualSPHysics for large-deformation geomechanics

cs.CE ·2026-10-18 ·Yangfan Ma, Bin Su, Zheng Han, Changze Li, Mitsuteru Asai
similarity 0.43
Abstract · 23 pages, 11 figures, 6 tables

Pore-water pressure changes the effective stress and deformation of saturated geomaterials, while skeleton deformation generates pressure and drives drainage. Resolving this feedback together with hydraulic boundary conditions is necessary for simulations that connect consolidation to large post-failure movement. This paper presents a hydromechanical extension of GeoDualSPHysics using a single-layer displacement-pore-water-pressure ($u$-$p_w$) smoothed particle hydrodynamics (SPH) framework. An explicit pressure-rate equation combines volumetric compression and Darcy diffusion, and the resulting pore pressure feeds back into the skeleton momentum balance. The implementation extends the existing modified dynamic boundary condition (mDBC) infrastructure to carry hydraulic ghost values alongside mechanical boundary data. Prescribed pressure at drained surfaces is combined with impermeable walls and impermeable loaded contacts, with separate control of loading and drainage activation. The formulation is assessed through one-dimensional consolidation, two-dimensional flexible-strip loading, and the three-dimensional Cryer problem. The Cryer simulations reproduce the non-monotonic central pressure response over four Poisson ratios, with normalized pressure root-mean-square errors of 0.012-0.030. The consolidation tests also expose remaining settlement and late-time pressure discrepancies. Applications to 5 m and 8 m sensitive-clay slopes illustrate sequential retrogressive failure and large deformation. The contribution is the integration of hydraulic feedback and boundary handling within GeoDualSPHysics; the results establish an initial verification basis while identifying remaining accuracy and convergence questions.

0.31

RaspAssistant as an Agentic Framework for Automating Adsorption Simulation Research in Porous Materials

cs.AI ·2026-10-20 ·Marko Petković, Susanne Gooijer, José Manuel Vicent-Luna, Vlado Menkovski, Sofía Calero
benchmark similarity 0.43
Abstract

Porous-material adsorption studies require coordinated structure preparation, force-field selection, simulation, validation, and interpretation, making end-to-end automation difficult. We test whether RaspAssistant, a hierarchical multi-agent framework, can carry an adsorption study from force-field preparation through validation and downstream separation analysis. Across twelve multi-agent workflow-reproduction runs spanning four adsorption and separation benchmarks, overall scores ranged from 8.50 to 10.00 on a rubric evaluating workflow correctness, simulation validity, and analysis consistency. In a separate eight-case force-field extraction benchmark, the mean weighted score was 0.967, combining parameter agreement and RASPA readiness. In open-ended studies, the system diagnosed and refined an acetylene force field and, after validating a CO$_2$ force field against MFI experiments, screened 197 pure-silica zeolites that passed automated input checks. These results demonstrate autonomous workflow execution after task specification and input provision: RaspAssistant coordinates, validates, adapts, and documents extended adsorption-simulation workflows while exposing model sensitivity and methodological limitations for expert review.

0.25

An improved bond-associated peridynamic model and its adaptive coupling with CCM for fracture analysis

cs.CE ·2026-08-12 ·Wenping Han, Bowen Sun, Shankun Liu, Fei Han
similarity 0.42
Abstract

This paper reformulates the correction factor in the force-state of the bond-associated peridynamic (BAPD) model. The reformulation is established from the strain energy density equivalence between the BAPD model and the classical continuum mechanics (CCM) model at a material point. With the FEM solution taken as the reference, the proposed correction factor improves the accuracy of the BAPD solution in this study. Furthermore, a BAPD-CCM coupled model is developed based on the above energy density equivalence, and a ``Morphing" function is introduced to achieve a smooth transition between the two models. For time integration, explicit schemes are adopted for both quasi-static and dynamic problems. In the spatial discretization, the CCM model is discretized by elements, whereas the BAPD model is discretized by particles. The solution accuracy of the coupled model is validated by comparison with the FEM solution and by evaluating the $L^{2}$ norm, the $H^{1}_{\mathrm{semi}}$, and the energy norm of the displacement error. Two- and three-dimensional numerical examples show that the proposed model has higher computational efficiency. For example, in the Mode I crack propagation problem, its computational cost is reduced by more than 72\% compared with that of the pure BAPD model, and the predicted crack patterns agree with experimental results.

0.04