CS Paper Radar

Efficient Robust Optimization via an Adaptive Mono-Level Gaussian Process Surrogate

Julius Schultz, Mustafa Essou, Ulrich Römer

cs.CE ·submitted 2026-11-17 09:29 UTC · v1
benchmark

Abstract

Optimization under uncertainty seeks designs that perform robustly despite varying operating conditions or uncertain model parameters. However, identifying such designs typically requires solving an optimization problem with a nested uncertainty analysis, resulting in a high computational burden. Surrogate models can alleviate this burden and enable optimization under uncertainty even with computationally expensive simulation models. This paper proposes a novel surrogate-based approach that reduces the number of costly model evaluations required for robust optimization. The approach adopts a mono-level strategy, in which a single Gaussian process surrogate is constructed and adaptively refined for both optimization and uncertainty analysis. Refinement in the design space is guided by a sampling-based uncertainty indicator that propagates the surrogate's epistemic uncertainty to the robustness measure. Efficient uncertainty estimation is crucial for the scalability of the algorithm and achieved through pathwise sampling combined with a weight-space representation of the Gaussian process. The proposed approach is evaluated on several analytical benchmark models and requires fewer model evaluations than a state-of-the-art bi-level surrogate approach while achieving comparable solution accuracy. Once trained, the mono-level surrogate can be reused to optimize different robustness measures at reduced cost. Moreover, the approach is successfully applied to a structural optimization problem with constraints and design variable uncertainty.

Closest papers

Nearest neighbours by meaning across the whole index.

Robust Bayesian Optimization with Q-Exponential Surrogates

cs.LG ·2026-09-26 ·Richard Cornelius Suwandi, Zhidi Lin, Feng Yin, Abdelhak M. Zoubir
hot direction similarity 0.68
Abstract · Submitted to ICASSP 2027

Bayesian optimization (BO) is a widely used framework for optimizing expensive black-box objectives, but standard BO methods often use Gaussian process (GP) surrogates whose Gaussian assumption is sensitive to outliers and heavy-tailed noise. We introduce q-ED-BO, a robust BO method whose surrogate follows a univariate q-exponential (q-ED) distribution, preserving GP-BO's closed-form posterior mean and variance while a shape parameter q controls the tail behavior, recovering the GP at q = 2 and growing heavier-tailed with wider confidence bounds as q decreases. This tractability yields a closed-form q-upper confidence bound (q-UCB) with sublinear regret, and an exact closed-form q-expected improvement (q-EI) that generalizes EI to the heavy-tailed predictive, recovering classical EI at q = 2. Experiments on beamformer and adaptive filter tuning with impulsive outliers show that q-ED-BO matches or exceeds existing baselines on clean data, and under corruption, improves the strongest baseline by approximately 0.7 dB in output SINR and 1.1 to 1.2 dB in misalignment reduction.

0.32

On the Brittleness of Maximum Likelihood Estimation for Gaussian Process Hyperparameter Optimization

cs.LG stat.MLstat.ME ·2026-08-13 ·Tyler R. Johnson, Kian Ben-Jacob, Christopher P. Muller, Ramin Bostanabad
code/data similarity 0.67
Abstract · 26 pages, 10 figures, 2 tables

Machine learning (ML) has become an indispensable part of modern engineering design workflows. A crucial step in training an ML model is the selection of the loss function which can be systematically formulated via various techniques such as maximum likelihood estimation (MLE) and cross-validation . While MLE is one of the most popular, effective, and intuitive mechanisms for training ML models, it is brittle: if the assumptions underpinning it are not met, the trained ML model may generalize poorly. This brittleness affects even Gaussian processes (GPs) which are widely used in engineering design and are often (incorrectly) presumed to be very robust to overfitting. In this paper, we fundamentally evaluate the brittleness of MLE in the context of training GPs for probabilistic regression or classification tasks. We compare theoretically grounded metrics against MLE and propose practical solutions. Our extensive studies demonstrate the effectiveness of our solutions in downstream design tasks such as Bayesian optimization and provide a blueprint for practitioners to build accurate and robust GPs that can even outperform tabular foundation models in terms of prediction accuracy, uncertainty quantification, and inference cost. Our contributions are publicly available via GitHub at https://github.com/Bostanabad-Research-Group/GP-vs-TabPFN-vs-GPyTorch.

0.30

Bayesian Optimisation Using Product-of-Experts Gaussian Process Models with Uncertainty Calibration

cs.LG ·2026-09-14 ·Yean Hoon Ong
similarity 0.66
Abstract

Bayesian optimisation (BO) typically relies on a single global Gaussian process (GP) model as its surrogate model. However, GP regression has cubic computational complexity in the number of training data points, limiting its applicability to large-scale optimisation problems. The product-of-experts Gaussian process model with uncertainty calibration (GP-pro-c) mitigates this limitation by combining multiple local GP experts, enabling improved uncertainty quantification, reduced computational cost, and preservation of global correlations. Despite these desirable properties, the use of GP-pro-c in BO has not been thoroughly studied. This paper introduces BO-pro-c, a Bayesian optimisation algorithm that uses GP-pro-c as its surrogate model, and evaluate its performance across a diverse range of BO settings. Experimental results suggest that BO-pro-c maintains competitive optimisation performance while achieving a 0.9% reduction in simple regret and a 39.4% reduction in computational overhead relative to a BO algorithm based on a single global GP model.

0.40

Reduced-Space Multi-Fidelity Bayesian Optimization of Process Simulation Models

cs.LG math.OC ·2026-09-15 ·Niki Triantafyllou, Andrea Bernardi, Maria M. Papathanasiou
publishedhot direction similarity 0.66
Abstract · Accepted at the 20th Learning and Intelligent Optimization Conference (LION 20), 2026. Corrected author version. This version corrects a typ…

Optimizing industrial process flowsheets is often computationally prohibitive due to the high cost of rigorous simulations and the curse of dimensionality inherent in complex design spaces. To address these challenges, we present a reduced-space multi-fidelity Bayesian optimization (RS-MFBO) framework designed for high-dimensional, expensive black-box functions. The approach integrates Global Sensitivity Analysis (GSA) for dimensionality reduction with a fidelity-augmented Gaussian process that captures correlations between low-cost approximations and expensive high-fidelity evaluations. A cost-aware acquisition strategy, augmented with cooldown and promotion mechanisms, adaptively guides the allocation of samples across fidelities. The framework is validated on two distinct industrial process simulators: a plasmid DNA bioprocess in SuperPro Designer and a green fuel synthesis plant in Aspen HYSYS. Results across diverse economic and physical objectives demonstrate that the proposed method substantially reduces the number of high-fidelity simulator evaluations while maintaining competitive optimization performance compared to single-fidelity baselines. These results highlight RS-MFBO as a scalable, simulator-agnostic approach for cost-constrained black-box optimization.

0.39

Expected Hypervolume Maximization for Multiobjective Optimization under Uncertainties

cs.LG ·2026-09-17 ·Victor Trappler
similarity 0.65
Abstract

The problem of multiobjective optimization under uncertainties is often approached by taking the expectation of each objective. In this work, we propose instead to formulate this as a Bayesian decision problem and to rely on the expected value of the hypervolume, which is to be maximized with respect to a finite set of input points. We show that this can be performed using methods based on gradients in a stochastic optimization framework, provided that care is taken with respect to dominated points. Moreover, in the absence of readily available differentiable code, we propose to use Gaussian Processes as differentiable surrogate models, in order to perform the optimization. An additional contribution in this work are some active learning strategies, through acquisition functions which helps construct a surrogate model well-designed for the multiobjective optimization problem at stake. These strategies are compared on simple analytical problems to assess their performances.

0.35

Predictively Oriented Gaussian Process Posteriors

cs.LG stat.ML ·2026-10-02 ·Callum Lau, Jeremias Knoblauch, Louis Sharrock
similarity 0.65
Abstract

Gaussian Processes (GPs) are a powerful tool for modelling and quantifying uncertainty in functional relationships. However, they require practitioners to make a number of design decisions, such as the choice of the kernel and the observation model. Suboptimal choices can produce misspecified models that do not capture the underlying data generating process. We introduce Predictively Oriented Gaussian Processes (PrO-GPs), which treat predictive uncertainty as the primary inferential target and provide a robust alternative to standard GPs. Although direct computation of a PrO posterior for nonparametric models is intractable, we derive a reduced formulation and practical sampling scheme for efficient computation. Through synthetic and real data experiments, we show that PrO-GPs produce better calibrated predictive distributions under model misspecification compared to standard GP approaches.

0.05

Large-Scale Bayesian Optimisation Using Uncertainty-Calibrated Product-of-Experts Gaussian Process Models with Trust Regions

cs.LG ·2026-11-01 ·Yean Hoon Ong
similarity 0.64
Abstract

The use of collections of independent local Gaussian processes (GP-ind) combined with trust regions is a widely adopted approach for large-scale and high-dimensional Bayesian optimisation (BO). However, this approach suffers from several limitations, including discontinuities at the boundaries of disjoint regions, an inability to capture long-range spatial correlations, potential information loss, and abrupt increases in computational overhead. To address these limitations, this paper introduces a novel BO algorithm, termed BO-pro-c-tr. The proposed method employs a product-of-experts Gaussian process model with uncertainty calibration (GP-pro-c) as its surrogate model and incorporates a one-to-many association strategy for integrating GP-pro-c with trust regions. Empirical results suggest that, when combined with the GP-LCB acquisition function, BO-pro-c-tr achieves an average reduction of 2.6% in simple regret and 34.9% in computational overhead relative to BO algorithms based on independent local GP models coupled with trust regions.

0.07

Exploiting Gradients in Bayesian Inference of Expensive Simulators

cs.LG stat.ML ·2026-10-08 ·Šimon Soldát, Václav Šmídl
top venuecode/data similarity 0.61
Abstract · 8 pages, 4 figures. Code: https://github.com/soldasim/BOSIP.jl

Simulators based on differential equations are ubiquitous in science and engineering. They are often used in simulation-based inference to evaluate the posterior distribution of the input parameters based on real-world observations of the simulator outputs. However, inference becomes challenging when individual simulator evaluations are computationally expensive. In such cases, a Bayesian optimization-based active learning approach with Gaussian process surrogate models has been used to maximize the information obtained from a limited simulation budget. Recently, gradients of simulator outputs with respect to input parameters have become increasingly available, yet they are rarely exploited for inference. Even though we only need to learn the simulator input-output relationship, gradient information can provide an additional valuable signal to guide the active learning procedure. This is of particular interest in the case of expensive simulators, when sample efficiency is crucial. In this paper, we demonstrate how incorporating gradient information into the Gaussian process surrogate accelerates Bayesian optimization-based inference under a limited simulation budget. Our results show significant improvement in convergence speed from using gradient information. For reverse-mode differentiation, the inference efficiency gains are maintained when accounting for the additional computational cost. In contrast, for forward-mode differentiation, the inference speed-up does not outweigh the computational costs. These results indicate that gradient-enhanced surrogates are beneficial primarily in problems where the number of parameters exceeds the output dimensionality, where reverse-mode differentiation is efficient.

0.61