CS Paper Radar

Bayesian Optimisation Using Product-of-Experts Gaussian Process Models with Uncertainty Calibration

Yean Hoon Ong

cs.LG ·submitted 2026-09-14 13:37 UTC · v1

Abstract

Bayesian optimisation (BO) typically relies on a single global Gaussian process (GP) model as its surrogate model. However, GP regression has cubic computational complexity in the number of training data points, limiting its applicability to large-scale optimisation problems. The product-of-experts Gaussian process model with uncertainty calibration (GP-pro-c) mitigates this limitation by combining multiple local GP experts, enabling improved uncertainty quantification, reduced computational cost, and preservation of global correlations. Despite these desirable properties, the use of GP-pro-c in BO has not been thoroughly studied. This paper introduces BO-pro-c, a Bayesian optimisation algorithm that uses GP-pro-c as its surrogate model, and evaluate its performance across a diverse range of BO settings. Experimental results suggest that BO-pro-c maintains competitive optimisation performance while achieving a 0.9% reduction in simple regret and a 39.4% reduction in computational overhead relative to a BO algorithm based on a single global GP model.

Closest papers

Nearest neighbours by meaning across the whole index.

Large-Scale Bayesian Optimisation Using Uncertainty-Calibrated Product-of-Experts Gaussian Process Models with Trust Regions

cs.LG ·2026-11-01 ·Yean Hoon Ong
similarity 0.89
Abstract

The use of collections of independent local Gaussian processes (GP-ind) combined with trust regions is a widely adopted approach for large-scale and high-dimensional Bayesian optimisation (BO). However, this approach suffers from several limitations, including discontinuities at the boundaries of disjoint regions, an inability to capture long-range spatial correlations, potential information loss, and abrupt increases in computational overhead. To address these limitations, this paper introduces a novel BO algorithm, termed BO-pro-c-tr. The proposed method employs a product-of-experts Gaussian process model with uncertainty calibration (GP-pro-c) as its surrogate model and incorporates a one-to-many association strategy for integrating GP-pro-c with trust regions. Empirical results suggest that, when combined with the GP-LCB acquisition function, BO-pro-c-tr achieves an average reduction of 2.6% in simple regret and 34.9% in computational overhead relative to BO algorithms based on independent local GP models coupled with trust regions.

0.07

Information-Based Calibration of Uncertainty Quantification in Product-of-Experts Gaussian Process Models

cs.LG ·2026-08-29 ·Yean Hoon Ong, Paolo Barucca, Wei Pan, Jun Wang
top venue similarity 0.80
Abstract · Published in the Journal of Artificial Intelligence Research, Volume 86 (2026)

Gaussian process (GP) regression with a single global GP (GP-glo) incurs cubic computational cost, limiting scalability to large datasets. Product-of-experts GP models (GP-pro), which combine local GP models to capture global correlations, alleviate this computational burden. However, training local experts on disjoint data subsets can lead to overestimated posterior variances. We propose GP-pro-c, a product-of-experts GP model that calibrates these variances using an information-based method. The method exploits the monotonicity and submodularity of information gain in GPs to define a calibration ratio that reduces the posterior variance of individual local GP models. We evaluate GP-pro-c using negative log-likelihood (NLL), root mean squared error (RMSE), and expected normalised calibration error (ENCE). Experiments on four synthetic functions and six regression datasets show that GP-pro-c achieves average reductions of 2.3% in NLL and 12.0% in ENCE compared with the uncalibrated GP-pro model. The proposed method mitigates posterior variance overestimation while maintaining predictive accuracy and reducing computational complexity. GP-pro-c provides a promising approach for uncertainty estimation in scalable GP models and may serve as a useful surrogate model for Bayesian optimisation with high-dimensional and large-scale data.

0.63

Pre-training of Bayesian Optimization Algorithm through Bayesian Optimization

cs.LG stat.ML ·2026-10-07 ·Satoshi Katayama, Shoyo Hunt, Shintaro Masuda, Masayuki Karasuyama
similarity 0.71
Abstract

Bayesian optimization (BO) is widely used as a standard approach for expensive black-box optimization. However, BO algorithms often involve parameters that must be specified in advance, and their performance can strongly depend on these choices. We propose a framework for optimizing such parameters using sample paths drawn from a Gaussian process (GP) inferred from the information available at the start of BO. We use cumulative regret as the performance metric for a BO algorithm. By running the BO algorithm on the generated sample paths, we obtain an empirical estimate of its expected cumulative regret for a given parameter configuration. Optimizing this estimate allows us to identify parameter configurations that, given the currently available information, are expected to achieve low cumulative regret. Since this parameter optimization is itself a black-box optimization problem, we employ another BO procedure to solve it, which we refer to as outer BO. Through experiments, we demonstrate that the proposed framework can effectively select parameter configurations that achieve strong performance among a range of candidate configurations.

0.24

Predictively Oriented Gaussian Process Posteriors

cs.LG stat.ML ·2026-10-02 ·Callum Lau, Jeremias Knoblauch, Louis Sharrock
similarity 0.69
Abstract

Gaussian Processes (GPs) are a powerful tool for modelling and quantifying uncertainty in functional relationships. However, they require practitioners to make a number of design decisions, such as the choice of the kernel and the observation model. Suboptimal choices can produce misspecified models that do not capture the underlying data generating process. We introduce Predictively Oriented Gaussian Processes (PrO-GPs), which treat predictive uncertainty as the primary inferential target and provide a robust alternative to standard GPs. Although direct computation of a PrO posterior for nonparametric models is intractable, we derive a reduced formulation and practical sampling scheme for efficient computation. Through synthetic and real data experiments, we show that PrO-GPs produce better calibrated predictive distributions under model misspecification compared to standard GP approaches.

0.05

Acquisition for Spherical-Linear Bayesian Optimization on the Cube

cs.LG stat.MLstat.CO ·2026-10-23 ·Nathan Wycoff
similarity 0.67
Abstract

Recent work demonstrated that executing Bayesian Optimization (BO) using simply a linear surrogate with a clever transformation is enough to approximate the performance of the standard Gaussian-Process (GP) based version on high-dimensional test functions. When the decision region is a sphere, this strategy admits rapid exact acquisition. However, it is the unit cube we encounter most often in the BO literature, and in this setting a standard approach, namely a multi-start quasi-Newton method, is employed for solving the acquisition subproblem. In this article, we will discuss a series of results, both positive and negative, regarding the complexity of global resolution of various acquisition subproblems over the unit cube. On the basis of this discussion, we will propose a new acquisition function which is globally optimizable using significantly less execution time than the incumbent approach while maintaining or improving performance. The resulting method is competitive with GP-based BO in terms of accuracy per evaluation, and is superior in terms of accuracy per walltime on black-boxes of low to moderate computational intensity.

0.14

Efficient Robust Optimization via an Adaptive Mono-Level Gaussian Process Surrogate

cs.CE ·2026-11-17 ·Julius Schultz, Mustafa Essou, Ulrich Römer
benchmark similarity 0.66
Abstract

Optimization under uncertainty seeks designs that perform robustly despite varying operating conditions or uncertain model parameters. However, identifying such designs typically requires solving an optimization problem with a nested uncertainty analysis, resulting in a high computational burden. Surrogate models can alleviate this burden and enable optimization under uncertainty even with computationally expensive simulation models. This paper proposes a novel surrogate-based approach that reduces the number of costly model evaluations required for robust optimization. The approach adopts a mono-level strategy, in which a single Gaussian process surrogate is constructed and adaptively refined for both optimization and uncertainty analysis. Refinement in the design space is guided by a sampling-based uncertainty indicator that propagates the surrogate's epistemic uncertainty to the robustness measure. Efficient uncertainty estimation is crucial for the scalability of the algorithm and achieved through pathwise sampling combined with a weight-space representation of the Gaussian process. The proposed approach is evaluated on several analytical benchmark models and requires fewer model evaluations than a state-of-the-art bi-level surrogate approach while achieving comparable solution accuracy. Once trained, the mono-level surrogate can be reused to optimize different robustness measures at reduced cost. Moreover, the approach is successfully applied to a structural optimization problem with constraints and design variable uncertainty.

0.09

Reduced-Space Multi-Fidelity Bayesian Optimization of Process Simulation Models

cs.LG math.OC ·2026-09-15 ·Niki Triantafyllou, Andrea Bernardi, Maria M. Papathanasiou
publishedhot direction similarity 0.66
Abstract · Accepted at the 20th Learning and Intelligent Optimization Conference (LION 20), 2026. Corrected author version. This version corrects a typ…

Optimizing industrial process flowsheets is often computationally prohibitive due to the high cost of rigorous simulations and the curse of dimensionality inherent in complex design spaces. To address these challenges, we present a reduced-space multi-fidelity Bayesian optimization (RS-MFBO) framework designed for high-dimensional, expensive black-box functions. The approach integrates Global Sensitivity Analysis (GSA) for dimensionality reduction with a fidelity-augmented Gaussian process that captures correlations between low-cost approximations and expensive high-fidelity evaluations. A cost-aware acquisition strategy, augmented with cooldown and promotion mechanisms, adaptively guides the allocation of samples across fidelities. The framework is validated on two distinct industrial process simulators: a plasmid DNA bioprocess in SuperPro Designer and a green fuel synthesis plant in Aspen HYSYS. Results across diverse economic and physical objectives demonstrate that the proposed method substantially reduces the number of high-fidelity simulator evaluations while maintaining competitive optimization performance compared to single-fidelity baselines. These results highlight RS-MFBO as a scalable, simulator-agnostic approach for cost-constrained black-box optimization.

0.39

Adapting Nonstationary Multi-output Gaussian Processes to Bayesian Optimization

cs.LG cs.AI ·2026-09-26 ·Zikai Xie
similarity 0.65
Abstract

Multi-objective Bayesian optimization (MOBO) commonly relies on independent Gaussian processes (GPs) with stationary kernels, limiting its ability to represent nonstationary structure and share information between objectives. However, expressive nonstationary GPs do not necessarily make reliable BO decisions. We study this mismatch for the multi-output low-rank nonstationary (MO-LRN) GP: strong training fit can coexist with large off-design errors and optimistic acquisition predictions. We introduce MOLRN-BO, which combines a regularized shared-spectral surrogate with objective-specific residuals, prequential mean correction and tempered covariance scaling, and Pareto-local qLogEHVI optimization with periodic global search. Experiments on 12 deterministic bi-objective benchmarks show that MOLRN-BO substantially improves upon the original MO-LRN and achieves the best average problem ranks for final normalized hypervolume and normalized inverted generational distance among nine evaluated algorithms. It also achieves the strongest adverse-tail performance while remaining competitive with the leading baselines in anytime optimization. Ablation studies further show that the shared spectral construction improves off-design prediction, the local--global decision policy improves optimization performance, and hierarchical calibration reduces systematic candidate bias. These results demonstrate that nonstationary multi-output surrogates can deliver strong and robust MOBO performance when their structure and use are explicitly adapted to the demands of sequential optimization.

0.26