CS Paper Radar

Physics-Informed and Hybrid Machine Learning in Additive Manufacturing: Application to Fused Filament Fabrication

Berkcan Kapusuzoglu, Sankaran Mahadevan

cs.LG cs.CEstat.CO ·submitted 2026-08-18 01:02 UTC · v1
publishedhighly cited

Abstract

This article investigates several physics-informed and hybrid machine learning strategies that incorporate physics knowledge in experimental data-driven deep-learning models for predicting the bond quality and porosity of fused filament fabrication (FFF) parts. Three types of strategies are explored to incorporate physics constraints and multi-physics FFF simulation results into a deep neural network (DNN), thus ensuring consistency with physical laws: (1) incorporate physics constraints within the loss function of the DNN, (2) use physics model outputs as additional inputs to the DNN model, and (3) pre-train a DNN model with physics model input-output and then update it with experimental data. These strategies help to enforce a physically consistent relationship between bond quality and tensile strength, thus making porosity predictions physically meaningful. Eight different combinations of the above strategies are investigated. The results show how the combination of multiple strategies produces accurate machine learning models even with limited experimental data.

Comment
11 pages, JOM (Journal of The Minerals, Metals & Materials Society)
Journal ref
JOM 72, 4695--4705 (2020)
DOI
10.1007/s11837-020-04438-4

Closest papers

Nearest neighbours by meaning across the whole index.

Federated Physics-Informed Thermal Field Prediction Across Unseen Geometries in Distributed Additive Manufacturing

cs.LG ·2026-11-13 ·Amirul Islam Saimon, Zhenyu, Kong
benchmarkcode/data similarity 0.64
Abstract

In additive manufacturing (AM), each change in part geometry requires a new thermal simulation, which makes design evaluation over many candidates costly. Geometry-aware models reduce this cost by predicting thermal fields on unseen parts with a single learned model, but they assume that diverse geometries are available centrally. This assumption is restrictive when each manufacturing site holds only a limited set of proprietary part designs that it cannot share. We propose Fed-PIGANO, a federated framework that trains physics-informed geometry-aware neural operator (PI-GANO) models at individual sites and aggregates their geometry encoders and prediction networks without sharing part geometries. We evaluate the framework on a 2D steady-state thermal benchmark for metal AM, with geometries from five polygonal families distributed across three sites under four scenarios that range from identical to strongly different family compositions. Over seven replications, Fed-PIGANO achieves mean relative L2 errors of 1.83% to 2.04% across all 12 scenario-site cases, compared with up to 20.46% for local-only training, and consistently yields lower PDE residuals. Its prediction accuracy is comparable to that of a centralized model trained on the pooled geometries of all sites. These results demonstrate that federated learning lets manufacturing sites benefit from each other's geometries without sharing them, enabling rapid thermal prediction on new part designs for tasks such as shape optimization, inverse design, and uncertainty quantification.

0.26

Multi-Objective Optimization Under Uncertainty of Part Quality in Fused Filament Fabrication

cs.CE cs.LGmath.NAmath.OC ·2026-08-19 ·Berkcan Kapusuzoglu, Paromita Nath, Matthew Sato, Sankaran Mahadevan, Paul Witherell
publishedhighly cited similarity 0.63
Abstract · ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering

This work presents a data-driven methodology for multi-objective optimization under uncertainty of process parameters in the fused filament fabrication (FFF) process. The proposed approach optimizes the process parameters with the objectives of minimizing the geometric inaccuracy and maximizing the filament bond quality of the manufactured part. First, experiments are conducted to collect data pertaining to the part quality. Then, Bayesian neural network (BNN) models are constructed to predict the geometric inaccuracy and bond quality as functions of the process parameters. The BNN model captures the model uncertainty caused by the lack of knowledge about model parameters (neuron weights) and the input variability due to the intrinsic randomness in the input parameters. Using the stochastic predictions from these models, different robustness-based design optimization formulations are investigated, wherein process parameters such as nozzle temperature, nozzle speed, and layer thickness are optimized under uncertainty for different multi-objective scenarios. Epistemic uncertainty in the prediction model and the aleatory uncertainty in the input is considered in the optimization. Finally, Pareto surfaces are constructed to estimate the tradeoffs between the objectives. Both the BNN models and the effectiveness of the proposed optimization methodology are validated using the actual manufacturing of the parts.

0.64

Information fusion and machine learning for sensitivity analysis using physics knowledge and experimental data

cs.CE cs.LGstat.MEstat.ML ·2026-08-18 ·Berkcan Kapusuzoglu, Sankaran Mahadevan
publishedcode/datahighly cited similarity 0.63
Abstract · Reliability Engineering & System Safety

When computational models (either physics-based or data-driven) are used for the sensitivity analysis of engineering systems, the sensitivity estimate is affected by the accuracy and uncertainty of the model. This paper considers global sensitivity analysis (GSA) for situations where both a physics-based model and experimental observations are available, and investigates physics-informed machine learning strategies to effectively combine the two sources of information in order to maximize the accuracy of the sensitivity estimate. Two representative machine learning (ML) techniques are considered, namely, deep neural networks (DNN) and Gaussian process (GP) modeling, and two strategies for incorporating physics knowledge within these techniques are investigated, namely: (i) incorporating loss functions in the ML models to enforce physics constraints, and (ii) pre-training and updating the ML model using simulation and experimental data respectively. Four different models are built for each type (DNN and GP), and the uncertainties in these models are included in the Sobol indices computation. The DNN-based models, with many degrees of freedom in terms of model parameters and training options, are found to result in smaller bounds on the sensitivity estimates when compared to the GP-based models. The proposed methods are illustrated for additive manufacturing and lake temperature modeling examples.

0.62

Interpretable neural equation learning for high-dimensional materials data

cs.LG cond-mat.mtrl-sci ·2026-10-27 ·Philip Jacobson, Prasad Iyer, Remi Dingreville, Saaketh Desai
similarity 0.61
Abstract

Equation learning seeks to discover compact, interpretable equations from data using various machine-learning techniques. However, few workflows discover and interpret learned equations in sparse, high-dimensional materials datasets. We present nn-EQL, an equation-learning framework that generates candidate equations through iterative training, pruning, and retraining of a neural network with customizable, user-specified neuron-level activation functions. Candidate equations are ranked using a minimum description length (MDL)-inspired score, balancing error and sparsity, and diagnosed to assess term-wise contributions, input-scaled sensitivities, and uncertainties. We demonstrate nn-EQL on standard AI-Feynman benchmarks as well as multiscale high-dimensional materials datasets such as finite-element simulations of heterogeneous materials, and high-throughput experimental thin-film deposition data. nn-EQL integrates with tabular data and high-dimensional data via standard encoder models, learning equations and providing insight into learned terms. Looking forward, integrating physically interpretable representations, multimodal and multi-fidelity data, and adaptive data acquisition could enable equation learning to formulate and test mechanistic hypotheses.

0.24

Predicting Mechanical Properties of Lignin-Containing Polyurethane Rigid Foams from Microstructure Using Convolutional Neural Networks

cs.CE cond-mat.mtrl-sci ·2026-08-11 ·Ilige S. Hage, Charbel Y. Seif, Jose Enrico Q. Quinsaat, Daniel J. van de Pas, Richard Vendamme +3 more
published similarity 0.61
Abstract

Bio-based alternatives for conventional rigid foams have proven to be good substituents owing to their enhanced sustainability and competitive performance. However, because their manufacturing processes are complex and destructive testing is often impractical, this study investigates whether microstructural features can be correlated with mechanical properties in lignin-containing rigid polyurethane (PU) foams using machine-learning approaches. Various types and percentages of lignin-based polyols were investigated as a partial polyol replacement. Scanning electron microscopy (SEM) images and corresponding mechanical compression data were used to train a custom state-of-art dual-head convolutional neural network (CNN) targeting the specific prediction of density, specific compression modulus, specific yield strength, and specific compression strength. The CNN was optimized with a weighted multi-output loss function, achieving strong predictive performance R2 values ranging from 0.850 to 0.91 and correlation coefficients above 0.92 while maintaining mean absolute error percentages below 9%. This proves the trained network capability to predict and capture morphological features governing load bearing responses. On the other hand, Grad-CAM visualization revealed that the network focused its predictions on physically meaningful microstructural regions such as cell walls and strut junctions, which confirm that the proposed network can be classified as an interpretable, non-destructive and data-driven framework for predicting and understanding bio-based PU foams mechanical behavior, hence reducing the inconvenience caused by time consuming manufacturing and destructive testing.

0.22

Domain-informed Adaptive Sampling for Generalizable PINNs in Metal Additive Manufacturing via Conditional Flow Matching

cs.LG ·2026-10-06 ·Hyeonsu Lee, Jihoon Jeong
similarity 0.61
Abstract

Accurate thermal modeling is essential in metal additive manufacturing (AM) for understanding the process-structure-property chain. Physics-informed neural networks (PINNs) offer effective surrogate thermal modeling by minimizing physics-based residual losses at collocation points. However, prior works typically rely on manually-crafted, static collocation sampling strategies, which are neither principled nor scalable across process conditions, hindering their generalization capability. In this work, we provide theoretical analysis through empirical risk minimization, showing that process condition-aware adaptive sampling is strictly more favorable than conventional static sampling for generalization. Building on this insight, we propose an adaptive sampling strategy within a two-stage framework: (1) a conditional Flow Matching model that learns approximate high-residual distributions across different process conditions, and (2) a mixed sampling strategy combining this distribution with a domain-informed base distribution to generate adaptive collocation points for refining the PINN predictor. Experiments on metal AM numerical benchmarks demonstrate that our method consistently outperforms state-of-the-art PINN baselines, achieving an average 62.1\% reduction in relative $L_2$ error under an identical collocation budget, by capturing process-dependent heat dissipation regions often overlooked in the literature. To the authors' knowledge, this is the first adaptive sampling strategy for PINNs in metal AM, contributing to the enhanced generalization and broader applicability.

0.27

Deep Learning-based Mechanical Characterization of Synthetically Generated Plant Fibers under Transverse Compression

cs.CV ·2026-10-12 ·Nikolaos Kegkeroglou, Bilal Sabillah, Myrto Inglezou, Vincent Placet, Céndric Clevy +1 more
published similarity 0.61
Abstract

Plant fibers are increasingly used as sustainable reinforcements in composites, but the intrinsic variability of their microstructure causes substantial scatter in transverse mechanical behavior, complicating composite design. Characterizing this behavior relies on finite element (FE) simulations requiring several minutes of high-performance computing per fiber, making high-throughput characterization across realistic fiber populations impractical. In this study, we propose a deep learning framework replacing this FE bottleneck with a fast pipeline. It includes two coupled recursive U-Nets predicting the step-by-step evolution of fiber deformation and internal stress fields under transverse compression, followed by a regression CNN estimating the transverse Young's modulus from the final stress field. Unlike prior approaches predicting stress fields for fixed configurations or idealized geometries, our framework recursively resolves the full temporal stress evolution for synthetic fibers derived from real hemp cross-sections, with or without a lumen. Trained on 1,000 synthetic fiber geometries with FE ground truth, it reproduces the stress field sequence with a Structural Similarity Index Measure (SSIM) of $0.9574 \pm 0.0074$ and a Root Mean Squared Error (RMSE) of $0.0345 \pm 0.0079$. It estimates transverse Young's modulus with an $R^2$ of $0.938 \pm 0.024$, a Mean Absolute Error (MAE) of $24.31 \pm 1.23$ MPa, and a Mean Absolute Percentage Error (MAPE) of $5.25 \pm 0.91\%$. Inference requires under one second per fiber versus five minutes per FE simulation, drastically reducing computational cost. This offers a fast, reliable tool for mechanical characterization of synthetic plant fibers, with promising applications in designing natural fiber-reinforced composites.

0.32

Influence of Extruded Filament Shape on Buildability in 3D Concrete Printing: A Geometry-Informed Deep Learning-FEM Approach

cs.CE cs.AIcs.LGmath.NA ·2026-09-03 ·Giacomo Rizzieri, Saif-Ur-Rehman, Jörg F. Unger, Annika Robens-Radermacher
similarity 0.60
Abstract · Added references

The geometric morphology of deposited filaments can significantly influence the structural performance and stability of 3D concrete-printed (3DCP) structures. However, most finite element (FEM)-based approaches for buildability assessment represent printed layers as simplified rectangles, potentially limiting predictive accuracy. This study proposes a geometry-informed modelling framework that integrates the deep-learning-based filament shape prediction tool ShapeGen3DCP with a layer-activation FEM approach to investigate the effect of realistic filament geometries on buildability. The framework generates geometry-aware numerical models directly from material and process parameters, eliminating the need for experimental filament characterization or computationally intensive fluid-flow simulations. Validation against experimental data and a parametric study of rectilinear walls demonstrate that extrusion parameters and the resulting filament geometry can significantly influence buildability predictions. Realistic filament representations are particularly important for free-flow deposition, whereas layer-pressing strategies are less sensitive to geometric simplifications. Among the investigated representations, an elliptical approximation provides an effective balance between geometric fidelity and modelling simplicity. When rectangular representations are preferred to enable regular computational meshes for faster simulations, defining their dimensions based on volume conservation improves prediction reliability compared with calibrating them using either the maximum filament width or the interlayer contact width. Overall, the proposed methodology demonstrates the importance of incorporating filament geometry into 3DCP simulations and provides practical guidance for selecting efficient and accurate geometric representations for buildability assessment.

0.19