CS Paper Radar

Predicting Mechanical Properties of Lignin-Containing Polyurethane Rigid Foams from Microstructure Using Convolutional Neural Networks

Ilige S. Hage, Charbel Y. Seif, Jose Enrico Q. Quinsaat, Daniel J. van de Pas, Richard Vendamme, Walter Eeversd, Karolien Vanbroekhovend, Elias Feghalid

cs.CE cond-mat.mtrl-sci ·submitted 2026-08-11 21:25 UTC · v1
published

Abstract

Bio-based alternatives for conventional rigid foams have proven to be good substituents owing to their enhanced sustainability and competitive performance. However, because their manufacturing processes are complex and destructive testing is often impractical, this study investigates whether microstructural features can be correlated with mechanical properties in lignin-containing rigid polyurethane (PU) foams using machine-learning approaches. Various types and percentages of lignin-based polyols were investigated as a partial polyol replacement. Scanning electron microscopy (SEM) images and corresponding mechanical compression data were used to train a custom state-of-art dual-head convolutional neural network (CNN) targeting the specific prediction of density, specific compression modulus, specific yield strength, and specific compression strength. The CNN was optimized with a weighted multi-output loss function, achieving strong predictive performance R2 values ranging from 0.850 to 0.91 and correlation coefficients above 0.92 while maintaining mean absolute error percentages below 9%. This proves the trained network capability to predict and capture morphological features governing load bearing responses. On the other hand, Grad-CAM visualization revealed that the network focused its predictions on physically meaningful microstructural regions such as cell walls and strut junctions, which confirm that the proposed network can be classified as an interpretable, non-destructive and data-driven framework for predicting and understanding bio-based PU foams mechanical behavior, hence reducing the inconvenience caused by time consuming manufacturing and destructive testing.

Closest papers

Nearest neighbours by meaning across the whole index.

Physics-Informed and Hybrid Machine Learning in Additive Manufacturing: Application to Fused Filament Fabrication

cs.LG cs.CEstat.CO ·2026-08-18 ·Berkcan Kapusuzoglu, Sankaran Mahadevan
publishedhighly cited similarity 0.61
Abstract · 11 pages, JOM (Journal of The Minerals, Metals & Materials Society)

This article investigates several physics-informed and hybrid machine learning strategies that incorporate physics knowledge in experimental data-driven deep-learning models for predicting the bond quality and porosity of fused filament fabrication (FFF) parts. Three types of strategies are explored to incorporate physics constraints and multi-physics FFF simulation results into a deep neural network (DNN), thus ensuring consistency with physical laws: (1) incorporate physics constraints within the loss function of the DNN, (2) use physics model outputs as additional inputs to the DNN model, and (3) pre-train a DNN model with physics model input-output and then update it with experimental data. These strategies help to enforce a physically consistent relationship between bond quality and tensile strength, thus making porosity predictions physically meaningful. Eight different combinations of the above strategies are investigated. The results show how the combination of multiple strategies produces accurate machine learning models even with limited experimental data.

0.63

Deep Learning-based Mechanical Characterization of Synthetically Generated Plant Fibers under Transverse Compression

cs.CV ·2026-10-12 ·Nikolaos Kegkeroglou, Bilal Sabillah, Myrto Inglezou, Vincent Placet, Céndric Clevy +1 more
published similarity 0.57
Abstract

Plant fibers are increasingly used as sustainable reinforcements in composites, but the intrinsic variability of their microstructure causes substantial scatter in transverse mechanical behavior, complicating composite design. Characterizing this behavior relies on finite element (FE) simulations requiring several minutes of high-performance computing per fiber, making high-throughput characterization across realistic fiber populations impractical. In this study, we propose a deep learning framework replacing this FE bottleneck with a fast pipeline. It includes two coupled recursive U-Nets predicting the step-by-step evolution of fiber deformation and internal stress fields under transverse compression, followed by a regression CNN estimating the transverse Young's modulus from the final stress field. Unlike prior approaches predicting stress fields for fixed configurations or idealized geometries, our framework recursively resolves the full temporal stress evolution for synthetic fibers derived from real hemp cross-sections, with or without a lumen. Trained on 1,000 synthetic fiber geometries with FE ground truth, it reproduces the stress field sequence with a Structural Similarity Index Measure (SSIM) of $0.9574 \pm 0.0074$ and a Root Mean Squared Error (RMSE) of $0.0345 \pm 0.0079$. It estimates transverse Young's modulus with an $R^2$ of $0.938 \pm 0.024$, a Mean Absolute Error (MAE) of $24.31 \pm 1.23$ MPa, and a Mean Absolute Percentage Error (MAPE) of $5.25 \pm 0.91\%$. Inference requires under one second per fiber versus five minutes per FE simulation, drastically reducing computational cost. This offers a fast, reliable tool for mechanical characterization of synthetic plant fibers, with promising applications in designing natural fiber-reinforced composites.

0.32

Thermally Conditioned Time-Series Forecasting of Grain Growth in Polycrystalline Materials

cs.LG cond-mat.mtrl-sci ·2026-11-04 ·Eliane Younes, Elie Hachem, Marc Bernacki
similarity 0.54
Abstract

Grain growth during heat treatment strongly affects the microstructure of polycrystalline materials and, consequently, their mechanical properties. Although numerical methods such as front-tracking or front-capturing simulations can accurately describe grain growth, their high computational cost limits their use for long or non-isothermal thermal cycles. In previous work, grain growth was successfully predicted under isothermal conditions by treating grain size distributions as time series and forecasting their evolution using recurrent neural networks, allowing complete grain growth trajectories to be generated in seconds rather than through costly PDE-based simulations. In the present work, this forecasting framework is reformulated to handle non-isothermal conditions by explicitly incorporating thermal information into the model architecture. Grain size distributions are encoded using a convolutional neural network, thermal descriptors are embedded through a dedicated multilayer perceptron, and temporal evolution is predicted using a recurrent network. Instantaneous temperature and thermal rate are provided at each time step, allowing the model to adapt its predictions to changing thermal conditions. The framework is trained and evaluated on datasets generated from validated front-tracking simulations across a wide range of non-isothermal thermal paths. The results show that the thermally conditioned model accurately reproduces grain growth dynamics under complex thermal histories, achieving, in k-fold cross-validation over all simulations, mean relative errors of 2.99% (one-hour cycles) and 4.51% (four-hour cycles) with coefficients of determination exceeding 0.99, and mean relative errors between 1.91% and 14.66% on ten simulations following four unseen thermal histories of increasing complexity.

0.23

Neural network scaling and generalization for 3D strain fields in heterogeneous materials

cs.CE physics.comp-ph ·2026-11-10 ·Lucas Fourel, Paul Devianne, Marine Debouvry, Tristan Destruhaut, Russell Gunn +3 more
similarity 0.53
Abstract

Computational homogenization and coupled multiscale simulations of heterogeneous materials require repeated solution of mechanical fields on Representative Volume Elements, which becomes prohibitively expensive for high-resolution three-dimensional microstructures. Machine-learning surrogates can accelerate these computations, yet most existing approaches predict fields for fixed macroscopic loadings and provide limited guidance on how to scale network architectures for high-resolution 3D tensor-field prediction. This work presents a U-Net surrogate trained to predict the full 36-component strain localization tensor field in voxelized concrete mesostructures at resolutions up to $256^3$. Training localization tensors are generated with an FFT-based linear elastic solver, and an extensive hyperparameter optimization is performed to derive scaling rules and an accuracy-speed trade-off analysis. The results show that only network width and depth need to be scaled with problem complexity, while several conventional U-Net design choices, such as doubling channels after downsampling, are suboptimal for this problem. The final neural network achieves a Mean Absolute Error of 1.118% on both the validation and the held-out test sets, and an inference speedup of approximately 8.7x over the FFT-based solver on an Nvidia H100 GPU. Generalization experiments reveal transfer across aggregate volume fractions and highlight the importance of training on diverse morphologies. To safeguard reliability, a Maximum Mean Discrepancy metric computed on internal feature maps is proposed for detecting out-of-distribution microstructures without costly reference computations.

0.37

Influence of Extruded Filament Shape on Buildability in 3D Concrete Printing: A Geometry-Informed Deep Learning-FEM Approach

cs.CE cs.AIcs.LGmath.NA ·2026-09-03 ·Giacomo Rizzieri, Saif-Ur-Rehman, Jörg F. Unger, Annika Robens-Radermacher
similarity 0.52
Abstract · Added references

The geometric morphology of deposited filaments can significantly influence the structural performance and stability of 3D concrete-printed (3DCP) structures. However, most finite element (FEM)-based approaches for buildability assessment represent printed layers as simplified rectangles, potentially limiting predictive accuracy. This study proposes a geometry-informed modelling framework that integrates the deep-learning-based filament shape prediction tool ShapeGen3DCP with a layer-activation FEM approach to investigate the effect of realistic filament geometries on buildability. The framework generates geometry-aware numerical models directly from material and process parameters, eliminating the need for experimental filament characterization or computationally intensive fluid-flow simulations. Validation against experimental data and a parametric study of rectilinear walls demonstrate that extrusion parameters and the resulting filament geometry can significantly influence buildability predictions. Realistic filament representations are particularly important for free-flow deposition, whereas layer-pressing strategies are less sensitive to geometric simplifications. Among the investigated representations, an elliptical approximation provides an effective balance between geometric fidelity and modelling simplicity. When rectangular representations are preferred to enable regular computational meshes for faster simulations, defining their dimensions based on volume conservation improves prediction reliability compared with calibrating them using either the maximum filament width or the interlayer contact width. Overall, the proposed methodology demonstrates the importance of incorporating filament geometry into 3DCP simulations and provides practical guidance for selecting efficient and accurate geometric representations for buildability assessment.

0.19

The norm, not the labels: training and evaluating finite-element surrogates for stress analysis in the energy norm

cs.CE cs.LG ·2026-11-09 ·Ruifeng Cao, Xidan Song
similarity 0.51
Abstract · 45 pages, 6 figures; supplementary material (37 pages, 4 figures) appended

Finite-element surrogates predict the stresses of a new design in one evaluation, but are usually trained on solutions with a displacement loss and compared by it, although engineering decisions rest on stresses. Application in engineering: stress analysis of perforated plates and solids with cavities, parametric families in which holes concentrate stress. Contribution to artificial intelligence: training and evaluating such surrogates in the energy norm, with or without solutions, and screening their predictions without solutions. For linear elastostatics, minimising the assembled discrete potential energy is exactly supervised regression in this norm: the energy gap of a prediction is the strain energy of its stress error. A displacement loss under-weights the stiff modes that carry the strains. In pre-registered comparisons, changing only the norm of the supervised loss cut a three-dimensional transformer's median energy-norm error 7.5-fold and its median von Mises error 6.1-fold; in two dimensions it more than halved the von Mises error, also on held-out instances. In three dimensions, the transformer trained on the energy alone came within a factor of 1.3 of the energy-norm-supervised one in median energy-norm and von Mises error. It was more accurate than the displacement-supervised one on all five metrics in every seed. Given the stiffness matrix, a Ritz projection was more accurate than the label-free transformer, in the seed means, on every metric but peak stress. No network transferred to a substantially finer mesh. The energy ranks predictions of a load case, and its sign flags those worse than the zero field.

0.47

Image-Based Breast Implant Detection for Mammography Dataset Curation and Near-Real-Time Deployment: Comparing Foundation Models and Task-Specific Convolutional Models

eess.IV cs.CVq-bio.TO ·2026-10-01 ·Vasisht Ishwar, Hari Trivedi, Young Seok Jeon, Beatrice Brown-Mulry, Frank Li +3 more
similarity 0.51
Abstract · 15 pages, 6 figures, 2 tables. Submitted to the Journal of Imaging Informatics in Medicine

Purpose: To evaluate the performance-feasibility tradeoffs of foundation models (FMs) and task-specific convolutional neural networks (CNNs) trained from scratch for breast implant classification in 2D mammography, with emphasis on suitability for near real-time clinical deployment. Methods: We evaluated four models: two FMs (RAD-DINO and MammoCLIP) and two CNNs trained from scratch for implant prediction (ResNet18 and our lightweight ResNetLite). Using the Emory Breast Imaging Dataset, 5,000 unilateral screening mammograms were used for training/validation and 1,000 manually reviewed unilateral images were held out for testing. For the FMs, global image embeddings from the pretrained encoder were classified using a support vector machine (SVM). The CNNs were trained end-to-end on 2D mammograms, with ResNetLite optimized via grid search over depth and width to balance accuracy and efficiency. Performance was evaluated using AUROC, sensitivity, specificity, accuracy, embedding visualization, and inference-latency. Results: All models demonstrated strong performance on held-out test data (n = 1,000). MammoCLIP achieved the highest AUROC (0.999) with the quickest training time of 493 seconds. RAD-DINO achieved the highest sensitivity (0.980; accuracy 0.989) but had the slowest inference and training times. ResNet18 and MammoCLIP achieved comparable accuracy (0.985). ResNetLite showed no statistically significant difference from ResNet18 (AUROC 0.993; accuracy 0.976) despite using only 1.4% of ResNet18's parameters, and had the fastest inference time. Conclusion: FMs and task-specific CNN models reliably detect breast implants on 2D mammography. Model selection is best guided by deployment context: MammoCLIP for GPU-equipped hospital settings requiring scalable integration, and lightweight CNNs such as ResNetLite for resource-constrained or edge deployments.

0.12

A Physics-informed Neural Network Approach for Robust Buckling Load Prediction and Reliability-Based Design of Thin Truncated Conical Shells

cs.LG ·2026-08-22 ·Devasmit Dutta, Budhaditya De, Rohan Majumder, Sudip Kumar Mishra
similarity 0.50
Abstract

Thin-walled truncated conical shells are widely used in aerospace, marine, offshore, and lightweight infrastructure systems due to their high strength-to-weight ratio and geometric efficiency. Their buckling resistance under axial compression, however, is highly sensitive to geometric imperfections, manufacturing tolerances, material variability, and nonlinear instability effects. Conventional design procedures rely on conservative knockdown factors (KDFs), such as those recommended in NASA SP-8019, which do not explicitly account for shell geometry, fabrication quality, data uncertainty, or target reliability. This study develops a physics-informed neural network (PiNN) framework for predicting critical buckling loads of thin truncated conical shells and integrates the trained surrogate within a reliability-based design (RBD) formulation. The model combines geometric and material descriptors with mechanics-informed features derived from shell stability theory and the localized reduced stiffness method (LRSM). A physics-informed loss function penalizes mechanically inadmissible predictions exceeding the theoretical elastic buckling load. The framework is trained and evaluated using 133 experimental Mylar conical shell tests under axial compression. Compared with a conventional deep neural network (DNN), the PiNN improves predictive accuracy, reduces mean absolute error, and enhances physical consistency. The trained PiNN is then used to evaluate reliability indices and calibrate safety-consistent KDFs for prescribed target reliability levels. Results demonstrate that the PiNN-RBD framework provides an efficient approach for uncertainty-aware design of imperfection-sensitive shell structures.

0.49