CS Paper Radar

The norm, not the labels: training and evaluating finite-element surrogates for stress analysis in the energy norm

Ruifeng Cao, Xidan Song

cs.CE cs.LG ·submitted 2026-11-09 23:35 UTC · v1

Abstract

Finite-element surrogates predict the stresses of a new design in one evaluation, but are usually trained on solutions with a displacement loss and compared by it, although engineering decisions rest on stresses. Application in engineering: stress analysis of perforated plates and solids with cavities, parametric families in which holes concentrate stress. Contribution to artificial intelligence: training and evaluating such surrogates in the energy norm, with or without solutions, and screening their predictions without solutions. For linear elastostatics, minimising the assembled discrete potential energy is exactly supervised regression in this norm: the energy gap of a prediction is the strain energy of its stress error. A displacement loss under-weights the stiff modes that carry the strains. In pre-registered comparisons, changing only the norm of the supervised loss cut a three-dimensional transformer's median energy-norm error 7.5-fold and its median von Mises error 6.1-fold; in two dimensions it more than halved the von Mises error, also on held-out instances. In three dimensions, the transformer trained on the energy alone came within a factor of 1.3 of the energy-norm-supervised one in median energy-norm and von Mises error. It was more accurate than the displacement-supervised one on all five metrics in every seed. Given the stiffness matrix, a Ritz projection was more accurate than the label-free transformer, in the seed means, on every metric but peak stress. No network transferred to a substantially finer mesh. The energy ranks predictions of a load case, and its sign flags those worse than the zero field.

Comment
45 pages, 6 figures; supplementary material (37 pages, 4 figures) appended

Closest papers

Nearest neighbours by meaning across the whole index.

A Physics-informed Neural Network Approach for Robust Buckling Load Prediction and Reliability-Based Design of Thin Truncated Conical Shells

cs.LG ·2026-08-22 ·Devasmit Dutta, Budhaditya De, Rohan Majumder, Sudip Kumar Mishra
similarity 0.57
Abstract

Thin-walled truncated conical shells are widely used in aerospace, marine, offshore, and lightweight infrastructure systems due to their high strength-to-weight ratio and geometric efficiency. Their buckling resistance under axial compression, however, is highly sensitive to geometric imperfections, manufacturing tolerances, material variability, and nonlinear instability effects. Conventional design procedures rely on conservative knockdown factors (KDFs), such as those recommended in NASA SP-8019, which do not explicitly account for shell geometry, fabrication quality, data uncertainty, or target reliability. This study develops a physics-informed neural network (PiNN) framework for predicting critical buckling loads of thin truncated conical shells and integrates the trained surrogate within a reliability-based design (RBD) formulation. The model combines geometric and material descriptors with mechanics-informed features derived from shell stability theory and the localized reduced stiffness method (LRSM). A physics-informed loss function penalizes mechanically inadmissible predictions exceeding the theoretical elastic buckling load. The framework is trained and evaluated using 133 experimental Mylar conical shell tests under axial compression. Compared with a conventional deep neural network (DNN), the PiNN improves predictive accuracy, reduces mean absolute error, and enhances physical consistency. The trained PiNN is then used to evaluate reliability indices and calibrate safety-consistent KDFs for prescribed target reliability levels. Results demonstrate that the PiNN-RBD framework provides an efficient approach for uncertainty-aware design of imperfection-sensitive shell structures.

0.49

Calibration of neural viscoelastic models via full-field data

cs.CE ·2026-09-03 ·Brain M. Riemer, Markus Kästner, Karl A. Kalina
similarity 0.56
Abstract

We propose an unsupervised learning framework for calibrating a physics-augmented neural network (PANN) for small-strain viscoelasticity via full-field data. It only requires quantities that are directly accessible in real experiments for training, namely global reaction forces and surface displacements. The underlying PANN is embedded in the generalized standard materials theory, in which two scalar-valued potentials render the constitutive model thermodynamically consistent by construction, while invariant-based representations of the free energy and the dual dissipation potential additionally ensure material symmetry. Considering a thin specimen under the plane stress assumption, we formulate a constrained optimization problem based on the equilibrium gap method in combination with quasi-Newton optimizers and automatic differentiation. Thereby, the unknown out-of-plane strain follows from the plane stress condition and the evolution of the internal variables is captured by an implicit time integration scheme. The resulting system of nonlinear equations is solved via a local Newton iteration at quadrature point and time step. To drastically reduce the computational cost of training, the backward adjoint method is employed to compute the gradient of the target loss, instead of backpropagating through all Newton iteration steps. The proposed framework is demonstrated for synthetic data, including noisy displacements and forces, showing excellent agreement across a wide range of deformation rates and load paths.

0.43

Neural network scaling and generalization for 3D strain fields in heterogeneous materials

cs.CE physics.comp-ph ·2026-11-10 ·Lucas Fourel, Paul Devianne, Marine Debouvry, Tristan Destruhaut, Russell Gunn +3 more
similarity 0.56
Abstract

Computational homogenization and coupled multiscale simulations of heterogeneous materials require repeated solution of mechanical fields on Representative Volume Elements, which becomes prohibitively expensive for high-resolution three-dimensional microstructures. Machine-learning surrogates can accelerate these computations, yet most existing approaches predict fields for fixed macroscopic loadings and provide limited guidance on how to scale network architectures for high-resolution 3D tensor-field prediction. This work presents a U-Net surrogate trained to predict the full 36-component strain localization tensor field in voxelized concrete mesostructures at resolutions up to $256^3$. Training localization tensors are generated with an FFT-based linear elastic solver, and an extensive hyperparameter optimization is performed to derive scaling rules and an accuracy-speed trade-off analysis. The results show that only network width and depth need to be scaled with problem complexity, while several conventional U-Net design choices, such as doubling channels after downsampling, are suboptimal for this problem. The final neural network achieves a Mean Absolute Error of 1.118% on both the validation and the held-out test sets, and an inference speedup of approximately 8.7x over the FFT-based solver on an Nvidia H100 GPU. Generalization experiments reveal transfer across aggregate volume fractions and highlight the importance of training on diverse morphologies. To safeguard reliability, a Maximum Mean Discrepancy metric computed on internal feature maps is proposed for detecting out-of-distribution microstructures without costly reference computations.

0.37

Constrained neural softening functions for the Mullins effect in parameter-dependent materials

cs.CE ·2026-10-25 ·Dominik K. Klein, Jonas Fey, Maximilian Kannapinn, Oliver Weeger
similarity 0.54
Abstract

Accurately capturing the Mullins effect across varying material compositions remains challenging, as constitutive models must unify flexible representations of stress softening with physical consistency and robust parameter calibration. In this work, we investigate parameter-dependent physics-augmented neural network constitutive models within the pseudo-elastic modeling framework, focusing on structural constraints that ensure physically admissible neural softening functions. This paper has three key contributions: (1) We formulate different neural softening functions within the pseudo-elastic framework, including a multiplicative decomposition of the softening function that enables parameter-dependent ansatz functions satisfying common mechanical constitutive conditions by construction. (2) We derive a sufficient condition for ellipticity of pseudo-elastic constitutive models, which can be enforced in the constitutive models by construction. (3) We systematically investigate how flexibility and structural constraints influence the performance of neural softening functions in terms of prediction accuracy and calibration robustness. For this, we consider multiaxial experimental data of carbon black-filled EPDM rubber synthesized with varying amounts of curatives. The findings of our work suggest that neural softening functions are a promising extension of the classical pseudo-elastic framework and, when subject to suitable constraints, can improve predictive accuracy for highly nonlinear, parameter-dependent materials.

0.28

Adapting neural operators for mechanics decisions under changing operating conditions

cs.CE cs.LGmath.NA ·2026-09-27 ·Prashant K. Jha, Koffi Enakoutsa, Ian Galloway, Henry Anderson
similarity 0.54
Abstract · 33 pages, 16 figures

Neural operators can accelerate repeated nonlinear mechanics calculations, but their accuracy can deteriorate as operating conditions move beyond the training range. This work studies whether high-fidelity solutions acquired during use can be reused to adapt a neural operator and improve subsequent mechanics-based command selection. Two hard-magnetic soft-material systems are simulated using high-fidelity finite-element (FE) models, providing reference solutions for evaluating surrogate predictions and selected commands. A neural operator predicts deformation from known material, loading, and magnetic-field inputs, while an empirical error estimator determines which predictions may be used for command selection. Selected FE evaluations supplement these predictions, and their complete loading paths are retained for periodic updates of the neural operator and estimator. In both examples, the fixed operator loses substantial accuracy when stiffness and loading move outside the training range. Updates using 16 acquired paths recover much of the lost accuracy while preserving accuracy in the nominal regime. Under the same FE evaluation budget, the updated operators also improve command selection, although the benefit varies with the operating condition. Error estimation is less consistent, with inaccurate predictions sometimes accepted and accurate predictions rejected. These results demonstrate that reusing high-fidelity loading paths can extend the useful operating range of a neural operator. However, improved forward accuracy alone does not guarantee reliable prediction acceptance, highlighting prediction-specific error assessment as a separate requirement for trustworthy decision making.

0.36

A mesh-based neural energy method for the simulation of heterogeneous composites

cs.CE cs.LG ·2026-10-07 ·Pius J. M. Wichmann, Stefan Hildebrand, Sandra Klinge
benchmark similarity 0.54
Abstract

Modeling heterogeneous materials remains a challenge for physics-informed neural networks such as the deep energy method (DEM). The DEM and its variants, here collectively referred to as the neural energy method (NEM), offer a differentiable variational framework. However, their conventional collocation-based implementation (C-NEM) often suffers from physically inadmissible displacement oscillations, integration errors, and high computational costs from automatic differentiation. This work introduces the mesh-based neural energy method (M-NEM), extending the NEM through a mesh-based discretization of the displacement field. By interpolating nodal displacements via shape functions, the M-NEM imposes a kinematic constraint that suppresses oscillations. Furthermore, the method replaces automatic differentiation with algebraic shape function derivatives for strain computation and employs high-order Gaussian quadrature for accurate energy integration. On a directly comparable benchmark problem, the M-NEM reduces stress errors by up to three orders of magnitude relative to the C-NEM while being one to two orders of magnitude faster. On two further benchmarks involving extreme stiffness contrasts, only the M-NEM converges. A comparative study of neural architectures reveals that radial basis function neural networks (RBFNNs) yield optimal performance within the M-NEM, resolving sharp gradients at material interfaces with higher accuracy than multi-layer perceptrons (MLPs) with random Fourier feature (RFF) mapping and faster convergence than Kolmogorov-Arnold networks (KANs).

0.22

DeepFEAv2: Deep Learning for Transient Finite Element Analysis Beyond Structured Meshes

cs.LG cs.AIcs.CE ·2026-09-22 ·Georgios Triantafyllou, Panagiotis G. Kalozoumis, Dimitris K. Iakovidis
similarity 0.53
Abstract

Finite Element Analysis (FEA) is widely used for transient mechanical simulations, but its high computational cost limits real-time and high-resolution applications. Deep learning surrogate models can reduce this cost; however, many existing approaches are restricted to steady-state prediction or cannot jointly predict Node- and Element-based Outputs (NEO) over time. The state-of-the-art DeepFEA framework has addressed these issues but remains limited to structured finite element (FE) meshes. To overcome this limitation, this study proposes DeepFEAv2, a deep learning surrogate framework that enables prediction of transient FEA simulations across different FE mesh topologies and element types. The main contributions of DeepFEAv2 are: (a) a module that uses the FE connectivity matrix to organize input features by element and arrange them into an input sequence guided by the mesh topology; (b) a novel neural network architecture designed to process the input sequence and jointly predict NEO over time; and (c) a FEA-informed optimization strategy for regularizing these NEO predictions. DeepFEAv2 was evaluated on structured and unstructured 3D linear elastic datasets, as well as on a pressure-driven aortic valve dataset. DeepFEAv2 achieved R^2 values up to 0.99 and normalized errors as low as 0.38%. Compared with DeepFEA, it achieved up to 38.0% relative increase in R^2 and up to 87.1% reduction in normalized error. DeepFEAv2 also performed inference up to three orders of magnitude faster than traditional FEA. These results demonstrate that DeepFEAv2 can efficiently model transient FEA simulations across increasingly complex FE settings, providing a scalable surrogate framework for transient FEA.

0.31

BAT-NO: A Boundary-Condition-Aware Transformer Neural Operator for Crashworthiness Prediction of Vehicle Components

cs.LG ·2026-10-02 ·Haoran Li, Yingxue Zhao, Haosu Zhou, Mustapha Ziane, Pierre Culiere +2 more
similarity 0.53
Abstract

High-fidelity finite-element simulations provide accurate crashworthiness predictions, but their cost limits iterative design exploration. Deep learning surrogates can reduce this cost, but many component-level models are developed under a single prescribed boundary condition, limiting generalisation to boundary variations. This work proposes a Boundary-Condition-Aware Transformer Neural Operator (BAT-NO) for autoregressive prediction of transient displacement fields and scalar crashworthiness responses under variations in geometry and boundary conditions. A B-pillar simulation framework evaluates generalisation across variations in geometry, impact position and velocity, and support stiffness. BAT-NO combines recurrent mesh processing with latent-grid Fourier operator processing. Boundary-condition information is transferred to the latent grid through a hybrid local--global mechanism. Slice-based attention models interactions among physically related regions, while direct boundary-to-grid projection preserves local spatial structure. Across the validation sets for the shape-only, shape-and-loading, and shape-loading-boundary cases, BAT-NO achieves the lowest mean final-step mean nodal Euclidean displacement error among the evaluated baselines. In the most challenging case, it reduces the mean error by 32.6% relative to the second-best model. Hyperparameter tuning reduces the validation error from 0.451 to 0.269 mm, with a comparable error of 0.267 mm on 300 unseen test simulations sampled within the investigated design space. An attention-based scalar decoder jointly predicts six response trajectories with a mean relative error of 2.46%. Most derived crashworthiness indicators have median errors below 3%. These results show that explicit local and global boundary-condition representations improve crashworthiness prediction over expanded component-level design spaces.

0.21