CS Paper Radar

Adapting neural operators for mechanics decisions under changing operating conditions

Prashant K. Jha, Koffi Enakoutsa, Ian Galloway, Henry Anderson

cs.CE cs.LGmath.NA ·submitted 2026-09-27 22:19 UTC · v1

Abstract

Neural operators can accelerate repeated nonlinear mechanics calculations, but their accuracy can deteriorate as operating conditions move beyond the training range. This work studies whether high-fidelity solutions acquired during use can be reused to adapt a neural operator and improve subsequent mechanics-based command selection. Two hard-magnetic soft-material systems are simulated using high-fidelity finite-element (FE) models, providing reference solutions for evaluating surrogate predictions and selected commands. A neural operator predicts deformation from known material, loading, and magnetic-field inputs, while an empirical error estimator determines which predictions may be used for command selection. Selected FE evaluations supplement these predictions, and their complete loading paths are retained for periodic updates of the neural operator and estimator. In both examples, the fixed operator loses substantial accuracy when stiffness and loading move outside the training range. Updates using 16 acquired paths recover much of the lost accuracy while preserving accuracy in the nominal regime. Under the same FE evaluation budget, the updated operators also improve command selection, although the benefit varies with the operating condition. Error estimation is less consistent, with inaccurate predictions sometimes accepted and accurate predictions rejected. These results demonstrate that reusing high-fidelity loading paths can extend the useful operating range of a neural operator. However, improved forward accuracy alone does not guarantee reliable prediction acceptance, highlighting prediction-specific error assessment as a separate requirement for trustworthy decision making.

Comment
33 pages, 16 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Data-Free Weak-Form Staggered Neural Operators for Magneto-Mechanical Coupling in Finite-Strain Elastomers

cs.CE ·2026-10-02 ·Alireza Yazdandousthamedani, Ahmad Moeineddin, Reza Najian Asl, Shahed Rezaei, Michael Kaliske
similarity 0.69
Abstract

Magneto-active elastomers, as a class of smart materials, exhibit strongly coupled magnetic and mechanical behavior at finite strains. Considering variations in microstructure, material properties, and geometry can lead to computationally expensive analyses. Building on the finite operator learning (FOL) framework, this study develops a data-free, physics-informed operator-learning framework for families of coupled finite-strain magneto-mechanical boundary-value problems. The governing magnetostatic and mechanical equations are enforced through finite-element weak-form residuals, allowing the neural operators to be trained without labeled finite-element solution data. The main contribution of this study is the development of a weak-form staggered neural operator (WSNO) framework for strongly coupled magneto-mechanical saddle-point problems. Separate magnetic and mechanical neural operators are trained alternately using a staggered optimization strategy, while their physical coupling is retained through the constitutive relations and residual evaluations. The resulting framework learns mappings from parameterized material and geometric descriptions to the corresponding coupled magnetic and mechanical solution fields. The proposed framework is investigated across several settings, including heterogeneous random-inclusion microstructures, varying magnetic phase contrast, area-fraction-dependent geometries, strongly out-of-distribution material morphologies, and three-dimensional geometry-parametric problems. In addition, the learned operator is combined with a neural-initialized Newton strategy, in which the nonlinear finite-element solver is initialized using the neural prediction. The results demonstrate that the proposed operator-learning framework can accurately capture coupled magneto-mechanical responses across a broad range of parametric problem settings.

0.15

DeepFEAv2: Deep Learning for Transient Finite Element Analysis Beyond Structured Meshes

cs.LG cs.AIcs.CE ·2026-09-22 ·Georgios Triantafyllou, Panagiotis G. Kalozoumis, Dimitris K. Iakovidis
similarity 0.59
Abstract

Finite Element Analysis (FEA) is widely used for transient mechanical simulations, but its high computational cost limits real-time and high-resolution applications. Deep learning surrogate models can reduce this cost; however, many existing approaches are restricted to steady-state prediction or cannot jointly predict Node- and Element-based Outputs (NEO) over time. The state-of-the-art DeepFEA framework has addressed these issues but remains limited to structured finite element (FE) meshes. To overcome this limitation, this study proposes DeepFEAv2, a deep learning surrogate framework that enables prediction of transient FEA simulations across different FE mesh topologies and element types. The main contributions of DeepFEAv2 are: (a) a module that uses the FE connectivity matrix to organize input features by element and arrange them into an input sequence guided by the mesh topology; (b) a novel neural network architecture designed to process the input sequence and jointly predict NEO over time; and (c) a FEA-informed optimization strategy for regularizing these NEO predictions. DeepFEAv2 was evaluated on structured and unstructured 3D linear elastic datasets, as well as on a pressure-driven aortic valve dataset. DeepFEAv2 achieved R^2 values up to 0.99 and normalized errors as low as 0.38%. Compared with DeepFEA, it achieved up to 38.0% relative increase in R^2 and up to 87.1% reduction in normalized error. DeepFEAv2 also performed inference up to three orders of magnitude faster than traditional FEA. These results demonstrate that DeepFEAv2 can efficiently model transient FEA simulations across increasingly complex FE settings, providing a scalable surrogate framework for transient FEA.

0.31

Generalizing Soft Tissue Deformation and Force Prediction Across Material Stiffness and Geometry

cs.AI cs.CGcs.CV ·2026-08-21 ·Madina Kojanazarova, Sidaty El Hadramy, Philippe C. Cattin
similarity 0.59
Abstract

Accurate soft tissue simulation is essential for surgical training, pre-operative planning, and haptic feedback systems. While learning-based surrogate models trained on data using the finite element method (FEM) offer a promising path to real-time inference, their reliability depends on well-calibrated constitutive models. Existing approaches neither provide systematic guidance on model selection across stiffness levels, nor generalize across different tissue stiffnesses or geometries. We perform a comprehensive calibration of hyperelastic constitutive models in the SOFA Framework using gravity-loaded silicone beams with different stiffnesses. Using calibrated simulations as training data, we use a softness conditioned equivariant graph neural network, enabling deformation and force prediction across multiple tissue types and unseen geometries. Our model achieves sub-millimeter mean deformation accuracy at 0.010s inference time, while showing that force prediction quality is directly tied to upstream calibration consistency.

0.31

A hierarchy of physics-embedded neural operators for structural dynamic surrogate modeling

cs.CE math-phphysics.comp-ph ·2026-11-04 ·Amir Nasrollahi, Mehmet Sefa Orak
similarity 0.57
Abstract

Structural-response surrogates must capture moving resonances, phase changes, and unequal-amplitude transfer channels during optimization or health-state changes. Physics-embedded learning seeks FEA-level accuracy at lower cost by embedding physics in inputs, forward passes, losses, and backpropagation. We propose Modal Rational (MR), mapping structural features to modal quantities for analytical frequency-response reconstruction. The Physics-Guided Modal Operator Network (PGMON) adds bounded frequency, damping, and residual-flexibility corrections. Modal Operator with Structural GELU and Anchored-SIREN Correction (MOSAIC) denotes the bounded spectral-discrepancy framework used here; MOSAIC-MR and MOSAIC-PGMON add such discrepancies. They support finite-dimensional maps and physical decoders for future neural operators; evidence is fixed-topology, not a completed operator comparison. Two 20,000-design populations are studied: an 80 m steel truss tower with variable member areas and attached masses, and a tapered shell beam with ten variable station masses. Archived tests cover ten designs and seven acceleration histories per structure; they are benchmarks, not seismic-design assessments. With 5% reference modal damping, MR, PGMON, and MOSAIC give mean displacement-history errors of 0.73-0.76% for the tower and 0.029-0.116% for the beam, against declared band-limited modal references. Supplied modal frequencies are distinguished from design-only use; unequal parameter counts and training settings are explicit. Error analysis separates learned modal discrepancies, truncation, and excitation weighting, explaining acceleration and difficult-tower limits and risks of blind use. Results support physically structured prediction but limit claims about generalization, computational savings, and added corrections. Next is developing and validating neural operators around these architectures.

0.23

On the Numerical Reliability of Differentiable Physics-Based Optimization for Robotic Material Manipulation

cs.RO cs.LG ·2026-09-28 ·Xintong Yang, Minglun Wei, Yu-Kun Lai, Ze Ji
published similarity 0.56
Abstract · Accepted as an oral presentation at the IROS 2026 workshop: Deformable Objects Manipulation: Research Foundations, Reproducibility and Real-…

Differentiable physics is increasingly used in robotic material manipulation for system identification, trajectory or skill optimization, demonstration generation, and robot or end-effector design. These applications depend on gradients propagated through long, contact-rich simulation rollouts. We study the numerical reliability of those gradients using two Material Point Method (MPM) system-identification benchmarks derived from elastoplastic and granular manipulation. The benchmarks provide controlled cases for three effects that also arise in broader differentiable physics-based optimization. GPU many-to-one sums whose order depends on thread scheduling changed long-horizon gradients and reversed the sign of one parameter gradient relative to a deterministic reference. Finite-difference checks became less reliable for longer rollouts because repeated-run loss variation grew much faster than the loss change produced by the tested parameter perturbations. Observation and loss definitions changed optimization behaviour and the solution preferred by an independent metric. These results motivate reproducible accumulation, finite-difference validation that compares perturbation-induced loss changes with repeated-run variation, and explicit reporting of objective construction when differentiable simulation is used for robotic optimization.

0.28

Constrained neural softening functions for the Mullins effect in parameter-dependent materials

cs.CE ·2026-10-25 ·Dominik K. Klein, Jonas Fey, Maximilian Kannapinn, Oliver Weeger
similarity 0.56
Abstract

Accurately capturing the Mullins effect across varying material compositions remains challenging, as constitutive models must unify flexible representations of stress softening with physical consistency and robust parameter calibration. In this work, we investigate parameter-dependent physics-augmented neural network constitutive models within the pseudo-elastic modeling framework, focusing on structural constraints that ensure physically admissible neural softening functions. This paper has three key contributions: (1) We formulate different neural softening functions within the pseudo-elastic framework, including a multiplicative decomposition of the softening function that enables parameter-dependent ansatz functions satisfying common mechanical constitutive conditions by construction. (2) We derive a sufficient condition for ellipticity of pseudo-elastic constitutive models, which can be enforced in the constitutive models by construction. (3) We systematically investigate how flexibility and structural constraints influence the performance of neural softening functions in terms of prediction accuracy and calibration robustness. For this, we consider multiaxial experimental data of carbon black-filled EPDM rubber synthesized with varying amounts of curatives. The findings of our work suggest that neural softening functions are a promising extension of the classical pseudo-elastic framework and, when subject to suitable constraints, can improve predictive accuracy for highly nonlinear, parameter-dependent materials.

0.28

A Physics-informed Neural Network Approach for Robust Buckling Load Prediction and Reliability-Based Design of Thin Truncated Conical Shells

cs.LG ·2026-08-22 ·Devasmit Dutta, Budhaditya De, Rohan Majumder, Sudip Kumar Mishra
similarity 0.55
Abstract

Thin-walled truncated conical shells are widely used in aerospace, marine, offshore, and lightweight infrastructure systems due to their high strength-to-weight ratio and geometric efficiency. Their buckling resistance under axial compression, however, is highly sensitive to geometric imperfections, manufacturing tolerances, material variability, and nonlinear instability effects. Conventional design procedures rely on conservative knockdown factors (KDFs), such as those recommended in NASA SP-8019, which do not explicitly account for shell geometry, fabrication quality, data uncertainty, or target reliability. This study develops a physics-informed neural network (PiNN) framework for predicting critical buckling loads of thin truncated conical shells and integrates the trained surrogate within a reliability-based design (RBD) formulation. The model combines geometric and material descriptors with mechanics-informed features derived from shell stability theory and the localized reduced stiffness method (LRSM). A physics-informed loss function penalizes mechanically inadmissible predictions exceeding the theoretical elastic buckling load. The framework is trained and evaluated using 133 experimental Mylar conical shell tests under axial compression. Compared with a conventional deep neural network (DNN), the PiNN improves predictive accuracy, reduces mean absolute error, and enhances physical consistency. The trained PiNN is then used to evaluate reliability indices and calibrate safety-consistent KDFs for prescribed target reliability levels. Results demonstrate that the PiNN-RBD framework provides an efficient approach for uncertainty-aware design of imperfection-sensitive shell structures.

0.49

Accelerated Reinforcement Learning for Soft Robotics: Hours Instead of Years

cs.RO cs.AIcs.LGmath.DS ·2026-11-09 ·Roshan S. Kaundinya, Hehui Zheng, Robert K. Katzschmann, George Haller
similarity 0.54
Abstract · 25 pages, 6 figures, 3 extended data figures

Reinforcement learning (RL) requires large amounts of interaction data or a reliable simulator, both hard to obtain for nonlinear soft robotic hardware. Recent work shows that a time-scale separation inherent to soft robot dynamics justifies their reduction to low-dimensional invariant manifolds, known as adiabatic spectral submanifolds (aSSMs). We demonstrate that an aSSM-reduced model, a simple polynomial ordinary differential equation learned purely from pre-collected data, can serve as an RL training environment. On a pneumatically actuated soft arm, we train a trajectory-tracking policy in 3 hours on a six-dimensional aSSM-reduced model and deploy it without fine-tuning, whereas reproducing this policy training extrapolates to 3 years of hardware interaction. Our policy tracks dynamic targets with 40% lower error than otherwise identical policies trained on a 4.8-million-parameter recurrent neural network (RNN) or a 1.7-million-parameter transformer, which take 13 and 100 hours to identify, against 5 minutes for our mathematically justified 6,924-parameter model.

0.23