CS Paper Radar

Domain-informed Adaptive Sampling for Generalizable PINNs in Metal Additive Manufacturing via Conditional Flow Matching

Hyeonsu Lee, Jihoon Jeong

cs.LG ·submitted 2026-10-06 21:19 UTC · v1

Abstract

Accurate thermal modeling is essential in metal additive manufacturing (AM) for understanding the process-structure-property chain. Physics-informed neural networks (PINNs) offer effective surrogate thermal modeling by minimizing physics-based residual losses at collocation points. However, prior works typically rely on manually-crafted, static collocation sampling strategies, which are neither principled nor scalable across process conditions, hindering their generalization capability. In this work, we provide theoretical analysis through empirical risk minimization, showing that process condition-aware adaptive sampling is strictly more favorable than conventional static sampling for generalization. Building on this insight, we propose an adaptive sampling strategy within a two-stage framework: (1) a conditional Flow Matching model that learns approximate high-residual distributions across different process conditions, and (2) a mixed sampling strategy combining this distribution with a domain-informed base distribution to generate adaptive collocation points for refining the PINN predictor. Experiments on metal AM numerical benchmarks demonstrate that our method consistently outperforms state-of-the-art PINN baselines, achieving an average 62.1\% reduction in relative $L_2$ error under an identical collocation budget, by capturing process-dependent heat dissipation regions often overlooked in the literature. To the authors' knowledge, this is the first adaptive sampling strategy for PINNs in metal AM, contributing to the enhanced generalization and broader applicability.

Closest papers

Nearest neighbours by meaning across the whole index.

Federated Physics-Informed Thermal Field Prediction Across Unseen Geometries in Distributed Additive Manufacturing

cs.LG ·2026-11-13 ·Amirul Islam Saimon, Zhenyu, Kong
benchmarkcode/data similarity 0.69
Abstract

In additive manufacturing (AM), each change in part geometry requires a new thermal simulation, which makes design evaluation over many candidates costly. Geometry-aware models reduce this cost by predicting thermal fields on unseen parts with a single learned model, but they assume that diverse geometries are available centrally. This assumption is restrictive when each manufacturing site holds only a limited set of proprietary part designs that it cannot share. We propose Fed-PIGANO, a federated framework that trains physics-informed geometry-aware neural operator (PI-GANO) models at individual sites and aggregates their geometry encoders and prediction networks without sharing part geometries. We evaluate the framework on a 2D steady-state thermal benchmark for metal AM, with geometries from five polygonal families distributed across three sites under four scenarios that range from identical to strongly different family compositions. Over seven replications, Fed-PIGANO achieves mean relative L2 errors of 1.83% to 2.04% across all 12 scenario-site cases, compared with up to 20.46% for local-only training, and consistently yields lower PDE residuals. Its prediction accuracy is comparable to that of a centralized model trained on the pooled geometries of all sites. These results demonstrate that federated learning lets manufacturing sites benefit from each other's geometries without sharing them, enabling rapid thermal prediction on new part designs for tasks such as shape optimization, inverse design, and uncertainty quantification.

0.33

CoupledFlow: One-Step Neural Operators for Coupled Multi-Physics PDEs

cs.LG cs.AI ·2026-11-07 ·Trong Khiem Tran, Minh Long Bui, Phi Le Nguyen, Mrinal Sen, Sanjay Srinivasan +2 more
top venue similarity 0.64
Abstract · Accepted NeurIPS 2026

This paper introduces COUPLED FLOW, a new neural operator learning framework for multi-physics PDE systems that captures the co-evolution of multiple physical processes by modeling their cross-process interactions. Unlike existing neural operator methods that primarily target single-physics settings, COUPLED FLOW employs a novel structure-constrained flow matching algorithm to learn process- specific mean velocity fields conditioned on the full multi-physics state. This enables fast and accurate one-step prediction of coupled PDE systems that would otherwise require expensive numerical simulations. A key challenge in training COUPLED FLOW however lies in sampling structure-constrained conditional flow interpolants that capture cross-process correlations and serve as training examples for flow matching. To address this challenge, we derive a multi-physics mean-flow consistency identity that characterizes cross-process interactions and defines the structure-constrained mean-flow matching loss. To provide informative training samples for flow matching with this loss, we develop a principled method for sampling correlated conditional interpolants based on posterior multi-output Gaus- sian processes, which capture richer cross-process correlations than the commonly used endpoint-conditioned linear interpolants. We also establish a theoretical re- sult showing that the Wasserstein-2 distance between the predicted and oracle PDE solution distributions is upper-bounded in terms of the structure-constrained flow matching loss and the smoothness of the learned flow. Experiments across diverse coupled PDE benchmarks demonstrate that COUPLED FLOW consistently outperforms existing state-of-the-art neural operators and generative PDE solvers.

0.40

Parameter Estimation in Machining Dynamics with Regenerative Delay and Nonsmooth Friction using Physics-Informed Neural Networks

cs.LG nlin.CD ·2026-10-05 ·Meiyazhagan Jaganathan, Vikram Pakrashi, Aasifa Rounak
similarity 0.61
Abstract

A multi-domain eXtended Physics-Informed Neural Network (XPINN) framework is developed for nonsmooth Delay Differential Equations (DDEs). This is the first implementation to demonstrate the efficacy of partitioning the temporal domain into subdomains of integer multiples of the characteristic time delay and progressively training the associated subnetworks while freezing previously learned parameters. The efficacy of the proposed framework is demonstrated using a machining dynamics model that incorporates both regenerative and nonsmooth frictional effects. Results demonstrate that the proposed multi-domain XPINN framework leads to better solution reconstruction in DDEs and improved parameter estimation compared to a generic PINN (SPINN) formulation. The proposed method works particularly well for extended temporal domains and non-constant history functions. The robustness of inverse XPINN (I-XPINN) is also assessed using reference data contaminated with Gaussian measurement noise. Results indicate that I-XPINN remains resilient to measurement noise and the physics-informed constraints guide the network toward accurately recovering the underlying dynamics. This demonstrates, for the first time, the potential of the proposed framework for reliable parameter identification in DDEs characterised by nonsmoothness and large time delays.

0.24

Physics-informed neural networks in the small-data regime: A controlled comparison with classical PDE surrogates

cs.CE cs.AImath.NA ·2026-11-09 ·Kirill Katsuba, Oleg Rudenko, Egor Bugaev, Alexander Tarakanov
similarity 0.61
Abstract

Neural surrogates for engineering models are often trained on large collections of simulated solutions. We investigate whether physics-informed neural networks (PINNs) can achieve accurate predictions from scarce labelled observations by incorporating governing equations and prescribed initial and boundary conditions. We introduce hierarchical loss weighting (H-PINN) and its gradient-direction-aware extension (HO-PINN), which adjust the emphasis on physical constraints according to higher-priority losses. Hierarchical PINNs are compared with Vanilla PINN, tuned gradient boosting, support-vector regression, and Gaussian-process regression on a heat equation and three heterogeneous two-phase-flow benchmarks. Experiments use 20--1000 labelled states and ten paired seeds. Each label is one coordinate--state observation, not a complete simulation. At least one PINN variant achieves the highest mean primary-target \(R^2\) in each interpolation and equation-assisted forecasting comparison at 20 and 50 labels. The advantage for water saturation persists across all tested budgets. Hierarchical weighting reduces variability across runs in selected settings. These results demonstrate that known physics can support accurate neural surrogate predictions from very few solution observations, at substantially higher fitting cost than the tested classical regressors.

0.22

Physics-Informed and Hybrid Machine Learning in Additive Manufacturing: Application to Fused Filament Fabrication

cs.LG cs.CEstat.CO ·2026-08-18 ·Berkcan Kapusuzoglu, Sankaran Mahadevan
publishedhighly cited similarity 0.61
Abstract · 11 pages, JOM (Journal of The Minerals, Metals & Materials Society)

This article investigates several physics-informed and hybrid machine learning strategies that incorporate physics knowledge in experimental data-driven deep-learning models for predicting the bond quality and porosity of fused filament fabrication (FFF) parts. Three types of strategies are explored to incorporate physics constraints and multi-physics FFF simulation results into a deep neural network (DNN), thus ensuring consistency with physical laws: (1) incorporate physics constraints within the loss function of the DNN, (2) use physics model outputs as additional inputs to the DNN model, and (3) pre-train a DNN model with physics model input-output and then update it with experimental data. These strategies help to enforce a physically consistent relationship between bond quality and tensile strength, thus making porosity predictions physically meaningful. Eight different combinations of the above strategies are investigated. The results show how the combination of multiple strategies produces accurate machine learning models even with limited experimental data.

0.63

Fixed-point neural samplers on discrete spaces

cs.LG ·2026-10-01 ·Jiajun He, Denis Blessing, Mouyang Cheng, Yuanqi Du, Carles Domingo-Enrich
similarity 0.60
Abstract

Sampling from discrete, unnormalized distributions without access to data is a challenging problem. Neural samplers offer a promising approach by training generative models from density evaluations directly. However, existing discrete neural samplers are prone to mode collapse, come without convergence guarantees when trained via fixed-point iterations, and are often tied to a specific reference process such as masked or uniform diffusion. In this work, we introduce Discrete Gibbs Iterative Neural Sampler, a fixed-point neural sampler that addresses these limitations, enabling efficient, scalable learning, substantially reducing mode collapse in practice. Besides masked diffusion, the framework also extends to transport between arbitrary distributions. DIG-IN mitigates mode collapse on Ising and Potts models and scales to amortized sampling with up to 2,500 sites, recovers alloy phase diagrams, and learns to sample biomolecular Boltzmann distributions from energy alone. Its transport formulation accurately estimates solvation and conformational free energies. As a maximum-entropy RL policy, DIG-IN outperforms the Gaussian, diffusion, and flow policies we compare against across 20 continuous-control tasks.

0.41

FrOGS: Discrete Neural Sampler for Independent Alloy Configurations Across Chemical Conditions

cs.LG cond-mat.mtrl-scicond-mat.stat-mech ·2026-09-01 ·Kyucheol Min, Elyssa Hofgard, Tess Smidt
published similarity 0.59
Abstract · Accepted as a Spotlight at the AI4Mat Workshop at NeurIPS 2026

Predicting the thermodynamic properties of an alloy requires sampling its configurations across many chemical conditions and recovering free energies on a common absolute scale. Markov chain Monte Carlo (MCMC) is the standard tool, but it requires separate simulations at different conditions, and auxiliary free-energy methods such as thermodynamic integration are used to place results on a common absolute scale. Modern discrete neural samplers typically use reverse KL divergence as the objective and can be mode-seeking or biased. We present Free energy Offering Generative Sampler (FrOGS), a hybrid discrete neural sampler that couples an autoregressive model to a continuous-time Markov chain (CTMC) to be trained jointly under a single shared loss. FrOGS draws i.i.d. configurations, returns an unbiased estimate of the partition function, and gives consistent estimates of thermodynamic observables. We train a single model across a wide range of chemical conditions to produce estimates on a common absolute free-energy scale. FrOGS matches exact finite-size results on the 2D Ising model and reference phase diagrams for AgPd and CuAu, without mode collapse. We additionally compare to SEGAL, a published autoregressive baseline, and find that only FrOGS recovers the stability range of the CuAu$_3$ phase.

0.51

LM6-CastBench: A Geometry-Aware Simulation Dataset for Transient Thermal Prediction in LM6 Sand Casting

cs.AI cond-mat.mtrl-sci ·2026-10-31 ·Suhani Kolhatkar, Anand Khandekar
benchmarkdataset similarity 0.59
Abstract

Transient thermal fields during solidification connect casting process conditions and cooling behaviour to the formation of defect-prone regions in aluminum cast ings. Repeatedly solving this thermal problem across geometries and process conditions is computationally expensive, motivating data-driven surrogate models. However, existing machine-learning studies on casting thermal behaviour rely on study-specific simulation databases that do not support reproducible geometry-level benchmarking. We introduce LM6-CastBench, an open simulation dataset for geometry-aware learning of transient thermal fields in LM6 aluminum sand casting, combining three geometry families, ten variants per family, five pouring tempera tures, and three mould temperatures (450 geometry-process cases in total). Each case retains CAD geometry, unstructured mesh connectivity, spatial descriptors, process metadata, and time-resolved nodal temperatures. We benchmark a point wise MLP against a spatially structured U-Net under geometry-level data splits; the U-Net reduces temperature-field errors by a large margin, with the biggest gains on geometries with localized features and abrupt section changes. LM6-CastBench gives researchers a reproducible dataset and benchmark for geometry-aware surro gate modelling of casting thermal behaviour.

0.26