CS Paper Radar

Parameter Estimation in Machining Dynamics with Regenerative Delay and Nonsmooth Friction using Physics-Informed Neural Networks

Meiyazhagan Jaganathan, Vikram Pakrashi, Aasifa Rounak

cs.LG nlin.CD ·submitted 2026-10-05 12:34 UTC · v1

Abstract

A multi-domain eXtended Physics-Informed Neural Network (XPINN) framework is developed for nonsmooth Delay Differential Equations (DDEs). This is the first implementation to demonstrate the efficacy of partitioning the temporal domain into subdomains of integer multiples of the characteristic time delay and progressively training the associated subnetworks while freezing previously learned parameters. The efficacy of the proposed framework is demonstrated using a machining dynamics model that incorporates both regenerative and nonsmooth frictional effects. Results demonstrate that the proposed multi-domain XPINN framework leads to better solution reconstruction in DDEs and improved parameter estimation compared to a generic PINN (SPINN) formulation. The proposed method works particularly well for extended temporal domains and non-constant history functions. The robustness of inverse XPINN (I-XPINN) is also assessed using reference data contaminated with Gaussian measurement noise. Results indicate that I-XPINN remains resilient to measurement noise and the physics-informed constraints guide the network toward accurately recovering the underlying dynamics. This demonstrates, for the first time, the potential of the proposed framework for reliable parameter identification in DDEs characterised by nonsmoothness and large time delays.

Closest papers

Nearest neighbours by meaning across the whole index.

Temperature-Dependent Multiphysics Modeling of Additive Friction Stir Deposition Using Multi-Task Coupled Physics-Informed Neural Networks

cs.CE physics.comp-ph ·2026-10-02 ·Dhrubajyoti Gupta, Nikhil Gotawala, Raghav Gnanasambandam, Rohit Kannan, Jian Yu +2 more
benchmark similarity 0.64
Abstract · 14 pages, 12 figures, 7 tables

Additive friction stir deposition (AFSD) involves coupled thermal and material-flow fields governed by frictional heating, plastic deformation, and tool-imposed boundary conditions. High-fidelity finite-volume methods (FVMs) can resolve these fields but are computationally expensive, while constant-property approximations can distort the predicted thermo-mechanical response. This work develops a steady-state multi-task coupled physics-informed neural network (MCoPINN) to predict three-dimensional temperature and material-flow fields while reconstructing temperature-dependent thermal conductivity, density, and specific heat from sparse property measurements. A theoretical analysis decomposes prediction error into property reconstruction and neural field-solver contributions and characterizes the discrepancy associated with constant-property models. A controlled one-dimensional nonlinear-conduction study evaluates property reconstruction under sparse measurements. The framework is then evaluated for AFSD against a temperature-dependent FVM benchmark and experimental thermocouple measurements. MCoPINN reproduces the reference thermal and material-flow fields and reduces average temperature root-mean-square error from 50.13 K for the constant-property CoPINN to 30.28 K across four traverse speeds. MCoPINN requires approximately 8.5 hours of training per condition, compared with 52 hours for the FVM benchmark. These results demonstrate computationally efficient, physics-coupled prediction with temperature-dependent material properties.

0.34

Domain-informed Adaptive Sampling for Generalizable PINNs in Metal Additive Manufacturing via Conditional Flow Matching

cs.LG ·2026-10-06 ·Hyeonsu Lee, Jihoon Jeong
similarity 0.61
Abstract

Accurate thermal modeling is essential in metal additive manufacturing (AM) for understanding the process-structure-property chain. Physics-informed neural networks (PINNs) offer effective surrogate thermal modeling by minimizing physics-based residual losses at collocation points. However, prior works typically rely on manually-crafted, static collocation sampling strategies, which are neither principled nor scalable across process conditions, hindering their generalization capability. In this work, we provide theoretical analysis through empirical risk minimization, showing that process condition-aware adaptive sampling is strictly more favorable than conventional static sampling for generalization. Building on this insight, we propose an adaptive sampling strategy within a two-stage framework: (1) a conditional Flow Matching model that learns approximate high-residual distributions across different process conditions, and (2) a mixed sampling strategy combining this distribution with a domain-informed base distribution to generate adaptive collocation points for refining the PINN predictor. Experiments on metal AM numerical benchmarks demonstrate that our method consistently outperforms state-of-the-art PINN baselines, achieving an average 62.1\% reduction in relative $L_2$ error under an identical collocation budget, by capturing process-dependent heat dissipation regions often overlooked in the literature. To the authors' knowledge, this is the first adaptive sampling strategy for PINNs in metal AM, contributing to the enhanced generalization and broader applicability.

0.27

Dissipative Lagrangian Neural Networks for the Interpretable Modelling of Passive Mechanical Systems

cs.LG cs.CE ·2026-10-11 ·Rob Seabourne, Alice Cicirello
similarity 0.61
Abstract

In this paper, we propose the Dissipative Lagrangian Neural Network (dLNN), a continuous-time system identification technique that separately learns the conservative and dissipative dynamics of a mechanical system directly from data. A key contribution is a novel parametrisation of dissipative forces that (i) is structurally constrained to be dissipative, enforcing passivity of the learned model, (ii) cannot absorb conservative mechanics, and (iii) retains sufficient expressivity to represent a broad family of state-dependent damping and regularised friction forces. The model is validated on prediction tasks on two real-world mechanical systems: trajectory prediction of a chaotic double pendulum and inverse-dynamics modelling of a six-degree-of-freedom industrial robot. Across these tasks, the dLNN demonstrates improved predictive performance over existing Lagrangian architectures while remaining competitive with a black-box neural model. The imposed physical structure also improves generalisation to unseen states, with the benefits becoming particularly pronounced when training data is limited. Finally, we introduce a symbolic distillation procedure that extracts closed-form expressions from the learned physical components. Applied to the industrial robot, this produces interpretable symbolic models that retain high predictive accuracy while reducing the computational overhead associated with evaluating neural Lagrangian models.

0.08

Equation informed time reparametrization for physics informed neural networks

cs.CE ·2026-10-30 ·Orestis Belokas, Christoforos Rekatsinas
similarity 0.61
Abstract · 25 figures, 4 tables

Physics Informed Neural Networks offer a mesh-free approach to solving differential equations, but their application to time-dependent problems remains challenging, particularly when the governing dynamics involve widely different time scales. With collocation points spread uniformly in time, short intervals of rapid change are under resolved. This work introduces an equation informed time reparameterization framework that modifies the temporal coordinate used during PINN training based on the local dynamics of the governing equation. The proposed method follows a two stage procedure. First, a pilot PINN training provides an approximate solution, which is used to linearize the governing differential operator and estimate its local response to small perturbations. These responses are combined into a time-dependent rate function, large where the dynamics are fast, that defines a strictly increasing transformation from physical time to a new computational time coordinate. A second PINN is then trained on the transformed governing equation, with uniformly sampled collocation points in the new coordinate producing a nonuniform distribution in physical time. Different combination rules and spatial reduction strategies are considered. With the cost of the pilot training included, the method reduces the error by a factor of 4 to 29 relative to the best alternative method on the Kachanov Rabotnov creep-damage model near rupture, and by a factor of 5 to 16 relative to every alternative method on the Frank-Kamenetskii equation near blow up.

0.08

AFT Neural Function Approximators for 1D Nonlinear Force Laws

cs.CE cs.LGmath.DS ·2026-09-24 ·Miriam Goldack, Johann Groß, Malte Krack, Merten Stender
similarity 0.60
Abstract · 20 pages, 6 figures, 6 tables

Nonlinear contacts and friction strongly influence the vibration response of assembled structures, but their accurate numerical treatment is computationally demanding. The harmonic balance method is widely used to compute periodic steady-state responses, yet the required alternating frequency-time scheme becomes costly for nonsmooth and hysteretic nonlinearities and must be repeated throughout the nonlinear solution process. Here we show that this procedure can be replaced by neural networks that directly map displacement Fourier coefficients to nonlinear force coefficients and provide the corresponding Jacobian through automatic differentiation. The surrounding solver and continuation algorithms remain unchanged for the computation of frequency response curves. The neural networks exclusively learn individual nonlinear elements rather than complete system responses. Physics-based nondimensionalization and phase normalization facilitate the learning process and enable a single trained network to cover a wide range of parameter combinations. Building on the cubic spring, unilateral spring, and Jenkins elements considered here, the approach points toward a reusable library of nonlinear-element surrogates that can be combined in arbitrary number and location within a mechanical system. By bypassing the iterative force evaluation in time domain, the method offers favorable computational scaling for high-resolution analyses and systems with many nonlinear elements.

0.30

History-informed Lagrangian Neural Networks

cs.LG ·2026-08-13 ·Tianshuo Zhang, Xianglei Xing, Wenzhe Zhai, Jia Gao, He Cao
publishedcode/data similarity 0.60
Abstract · 15 pages, 5 figures. Accepted to the 9th Chinese Conference on Pattern Recognition and Computer Vision (PRCV 2026) as an oral paper

Forecasting the long-horizon evolution of mechanical systems from position-only observations is a pivotal yet difficult task, as hidden velocities and trajectory-specific physical properties must be inferred simultaneously. Although physics-guided neural networks like Lagrangian Neural Networks (LNNs) guarantee physical plausibility, they generally require complete state inputs and lack adaptability to changing system parameters. To break these limitations, we introduce History-informed Lagrangian Neural Networks (HiLNN). Grounded in the insight that temporal position sequences implicitly encode underlying dynamics, HiLNN employs a recurrent encoder to extract a latent context from history. This context not only reconstructs the unobserved initial velocity but also adaptively modulates the mass matrix, potential energy, and damping coefficients of a structured Lagrangian system. By leveraging a differentiable RK4 rollout scheme, the entire pipeline is optimized end-to-end under multi-step trajectory supervision and energy-consistency regularization. Empirical evaluations across conservative, dissipative, and heterogeneous variable-parameter systems show that HiLNN delivers superior long-term prediction accuracy and maintains precise energy profiles compared to state-of-the-art baselines. The source code is publicly available at https://github.com/yingtian22/History-informed-LNN.

0.77

CEENs: Causality-enforced evolutional networks for solving time-dependent partial differential equations

cs.LG math.NA ·2026-10-03 ·Jeahan Jung, Heechang Kim, Hyomin Shin, Minseok Choi
publishedpositionhighly cited similarity 0.60
Abstract · 26 pages, 4 tables, 15 figures

Despite the growing popularity of physics-informed neural networks (PINNs), their applicability in the long-time integration of partial differential equations (PDEs) remains constrained. We argue that this problem stems from the lack of consideration of temporal causality in the original PINN formulation, resulting in a bias towards satisfying governing equations at later times before learning the initial condition and hence leading to erroneous solutions. To this end, we propose a novel method that seamlessly integrates temporal causality into the training process. Drawing inspiration from classical numerical methods where the temporal causality is reflected, we divide the time domain into nonoverlapping subintervals, assign a unique neural network to each subinterval, and construct a loss function founded on the integral form of PDEs within these subintervals. The proposed networks undergo sequential training, beginning with the initial time step. Our method demonstrates significant improvement in accuracy for long-time simulations of various PDE problems where the original PINN method fails while it requires less computational cost and memory compared to the PINN method. A parallelization algorithm is provided to further enhance the computational efficiency, showing a significant speedup for solving time-dependent PDEs.

0.46

Hybrid-time PINNs: Discontinuity-Aware Physics-Informed Neural Networks for Learning Hybrid Dynamical Systems

eess.SY cs.AI ·2026-10-24 ·Shivanshu Tripathi, Maziar Raissi
similarity 0.60
Abstract

Hybrid dynamical systems flow continuously but jump at discrete events. Physics-informed neural networks (PINNs) fit data while enforcing known dynamics, but a single network is smooth in time and cannot model these jumps. We show that the more closely a PINN follows a jump, the larger its physics loss must be. We propose hybrid-time PINNs (HT-PINNs), which assign one network to each flow interval of the hybrid time domain and train the networks jointly with the jump times and the unknown parameters. The number of jumps and the sequence of modes are found by enumeration. HT-PINNs recover the number of jumps and the restitution coefficient of a bouncing ball. In a MuJoCo simulation of robotic disassembly, where a robot pulls a press-fitted pin out of a housing through a spring, HT-PINNs find the number of jumps and the sequence of modes, and estimate the static and kinetic friction coefficients with small errors of 0.1% and 1.7%.

0.22