CS Paper Radar

Cross-modal topology decodes battery faults from sparse voltage snapshots

Jinwen Li, Yunhong Che, Simona Onori, Weihan Li, Xiaosong Hu

eess.SY ·submitted 2026-08-11 11:54 UTC · v1
published

Abstract

Battery safety remains the primary bottleneck for mass electric vehicle (EV) adoption, yet field monitoring is hamstrung by a fundamental asymmetry: complex electrochemical faults must be diagnosed via sparse, low-frequency voltage measurements. Existing methods struggle to resolve the signal ambiguity between overlapping fault modes without hardware upgrades. Here, we demonstrate that these distinct fault fingerprints are not lost, but topologically folded within voltage snapshots. We introduce DeFault, a cross-modal diagnostic framework that mathematically unfolds one-dimensional voltage sequences into multi-dimensional phase-space topologies. DeFault employs a bidirectional cross-attention mechanism that acts as an autonomous, physics-aligned filter, explicitly decoding compounded fault modes that remain fundamentally invisible to sequence-based methods. Validated on a field dataset of 16.4 million data records from 99 in-service EVs, our method achieves an average accuracy of 0.96 and an F1 score of 0.84 for four fault types using only 500-second snapshots (spanning <100 mV). This work proves that high-fidelity, interpretable electrochemical diagnosis is achievable on legacy fleets without new sensors, providing a scalable solution for the battery safety crisis.

Comment
33 pages, 12 figures

Closest papers

Nearest neighbours by meaning across the whole index.

TRACK: Tool-Augmented Reasoning over Time Series for Fault Diagnosis in Power Management System

cs.LG cs.AIcs.CLeess.SY ·2026-11-16 ·Erkan Bayram, Debanjan Ghosh, Li Zhu, Sambarta Dasgupta
benchmark similarity 0.63
Abstract

Fault diagnosis in power management systems running multiple loads relies on experts manually inspecting current and voltage waveforms, which fails to scale across deployed units. We present TRACK, which pairs a time series encoder with a Small Language Model to produce structured, physics-grounded diagnostic reports, calling tools for exact, verifiable calculations. It operates on-device, keeping proprietary sensor data local and avoiding expensive API calls. We introduce a rubric-based framework that evaluates these reports by scoring structure, signal fidelity, physics reasoning, diagnosis, and actionability through per-criterion verdicts. On a 15-class multi-load simulated benchmark, TRACK achieves over 95% fault-category accuracy and generalizes to out-of-distribution faults, whereas the best encoder-probing baseline reaches only 58% accuracy.

0.26

NOCE-Net: Representation Learning for Battery Operational Context via Nested Sequence Modelling

cs.CE eess.SY ·2026-10-15 ·Arnab Bhattacharjee, Wayes Tushar, Tapan Kumar Saha
top venuecode/data similarity 0.56
Abstract · 38 pages, Accepted in NeurIPS 2026

Learning effective representations from battery operational history is essential for predictive health management and control-oriented applications. Existing approaches rely on response-dependent engineered features or short early-life windows, limiting generalisability and precluding use in prospective settings where future responses are unavailable. We propose NOCE-Net, a deep nested sequence model that learns control-enabling representations directly from raw cyclic operational or telemetric data. Our data pipeline, re-BatteryData, standardises heterogeneous aging datasets into semantically equivalent Full Equivalent Cycles (FECs) defined by absolute charge throughput, enabling end-to-end learning across diverse operational regimes. NOCE-Net combines multi-patch transformer encoders for intra-cycle dynamics with a GRU backbone for inter-cycle state evolution, operating on approximately $700$ batteries across ten public datasets spanning over $300$ operational profiles. In zero-shot evaluation on unseen battery chemistries and usage patterns, NOCE-Net achieves $13.7\%$ MAPE in voltage response prediction, outperforming strong long-sequence baselines by over $43\%$ while using $40 \times$ fewer parameters. Shape and component diagnostics of the learned hidden states reveal that the GRU's principal direction of evolution achieves Spearman $|ρ| \geq 0.95$ with the capacity fade trajectory on average across all datasets with monotone degradation profiles, including zero-shot test batteries, providing evidence that the representations encode degradation dynamics transferable to downstream tasks beyond battery response modelling. Code is available at https://github.com/BeArnab96/NOCE-Net.

0.39

Robust Fault Detection in Mechanical Multimodal Time Series via Self-Supervised Cross-Modal Reconstruction

cs.LG stat.AP ·2026-09-14 ·Magnus Munk Jensen, Dorte Hammershøi, Rafał Wiśniewski, Olga Fink
similarity 0.54
Abstract · Submitted to Reliability Engineering & System Safety

Fault detection is essential in industrial systems, enabling early identification of abnormal behaviour and improving safety, reliability, and operational efficiency. Modern systems increasingly rely on heterogeneous sensing modalities that capture complementary aspects of the underlying physical process. However, existing data-driven anomaly detection methods often process each modality independently or use simple feature-level fusion, limiting their ability to exploit cross-modal relationships that characterize normal system behaviour. Their performance also commonly assumes similar training and deployment distributions, whereas real-world operation is affected by changing operating conditions, environmental influences, and system degradation that induce distribution shifts and reduce detection performance, especially in unseen regimes. In this work, we propose a multimodal anomaly detection framework based on cross-modal reconstruction of heterogeneous time-series sensor data. Rather than modeling each modality independently, the framework learns system dynamics by reconstructing each modality from the others, thereby exploiting complementary information across modalities. This integrates information across sensing channels without requiring explicit temporal alignment or identical sampling rates, while improving robustness to sensor noise, missing measurements, and modality-specific disturbances. To address distribution shifts during real-world deployment, anomalies are identified using cross-modal reconstruction error and an adaptive test-time thresholding mechanism that adjusts to changing operating conditions. Experiments on three industrial case studies show strong fault detection performance and substantially improved robustness under out-of-distribution conditions, with the largest gains observed in the most challenging operating regimes.

0.23

Single-Cycle Battery Remaining Useful Life Prediction with Compressed Continuous Wavelet Features and Deep Neural Networks

cs.LG cs.AI ·2026-10-25 ·Sungeun Kim, Mingyu Jung, Yuri Kim, Jin-Sung Park, Jongbin Ryu
publishedbenchmark similarity 0.53
Abstract

Lithium-ion batteries are widely used in industrial applications, but their performance gradually degrades over time, making accurate lifetime prediction important for safety and reliability. However, reliable lifetime assessment generally requires extensive degradation testing, which is both costly and time-consuming. To reduce this burden, recent data-driven approaches have sought to predict the end-of-life cycle of batteries from only the initial few cycles. Nevertheless, identifying reliable degradation patterns from such limited early-cycle data remains challenging because early aging dynamics are often subtle and nonlinear. To address this issue, we adopt the continuous wavelet transform to convert cycle-wise voltage, current, and capacity signals into time-frequency representations, enabling multi-resolution characterization of degradation behavior. Building on this representation, we apply scale compression to reduce redundancy while preserving structural information in the scalograms. We evaluate the proposed framework on eight benchmark datasets derived from seven public battery datasets covering diverse electrode chemistries, cell form factors, and cycling protocols. Experimental results show that the proposed framework consistently outperforms prior approaches in single-cycle remaining useful life prediction and remains robust as the number of input cycles increases from 1 to 100. In addition, redundancy-fidelity analysis characterizes the trade-off introduced by scale compression, and gradient-based visual explanations indicate that the model focuses on localized time-frequency regions associated with structured signal transitions during charge-discharge operation. These results demonstrate the effectiveness and interpretability of the proposed framework for early-cycle battery remaining useful life prediction.

0.23

Closed-loop domain generation enhances battery health diagnosis

eess.SY ·2026-10-09 ·Yue Wu, Ziyu Mo, Jinze Dai, Ziqing Xia, Shengyu Tao +2 more
similarity 0.52
Abstract

Reliable electrode-level degradation diagnosis is essential for accurate health estimation and non-destructive monitoring in advanced battery management. Diagnosis models developed under controlled laboratory conditions can fail when operating conditions change, while acquiring sufficient full-lifespan data in new target domains remains prohibitively time-consuming and practically unfeasible. Here, we propose a closed-loop domain generation framework to enable cross-domain battery health diagnosis under dynamic conditions. Physics-constrained domain generation is achieved through Variational Autoencoder-based latent extrapolation, which maps the source data and few-shot early-life target domain data into a shared latent space and generates cross-domain samples within physical boundaries. Bayesian optimization closes the generation-diagnosis loop by automatically calibrating the sampling, latent regularization, extrapolation, perturbation, and generation-volume hyperparameters using leakage-free development validation, thereby strictly excluding later-life target data from optimization and ensuring the quality and quantity of generated data. Numerical results demonstrate that, across four cross-domain cases, the proposed framework achieves average root mean square errors of 1.53%, 2.15%, and 2.02% for positive electrode active material loss, negative electrode active material loss, and lithium inventory loss, respectively, whereas traditional methods suffer from notably higher errors or even complete failure. This framework provides a general pathway for onboard and physics-consistent electrode-level degradation diagnosis, independent of downstream diagnosis models.

0.17

Intelligent Degradation Monitoring in Lithium-ion Batteries via Discharge Incremental Capacity Feature Estimation

eess.SY cs.LGeess.SP ·2026-09-19 ·Amir Madmolilvand, Farzaneh Abdollahi
similarity 0.52
Abstract

Accurate and timely detection of degradation in lithium-ion batteries is crucial to ensure safety, reliability, and longevity in high-demand applications such as electric vehicles and energy storage systems. Traditional incremental capacity (IC) analysis methods require low-current cycling for discharge measurements, limiting their practical use in real-time battery management. This paper proposes a novel neural network-based framework that predicts discharge IC features directly from charging signals, eliminating the need for low-current discharge. Trained on a comprehensive dataset of 53 battery cells cycled under diverse fast-charging protocols, the model demonstrates robust generalization ability, effectively estimating degradation indicators on unseen battery data. Among several architectures evaluated, the LSTM model provides the best balance of prediction accuracy and computational efficiency. The proposed approach enables real-time integration into Battery Management Systems (BMS), enhancing degradation monitoring without disrupting normal battery operation. This paper presents a study to bridge IC analysis with practical, fast-charging scenarios, marking a significant step towards intelligent and scalable battery health monitoring.

0.09

Estimating the Health and State of Charge of Each Cell in a Second-Life Battery System from Field Data

eess.SY ·2026-09-03 ·Martin Cornejo, Julian Meyer-Schwickerath, Juan Victor Sandalinas, Andreas Jossen
benchmark similarity 0.52
Abstract · 35 pages, 9 figures, includes supplementary material (10 pages, 9 supplementary figures, 2 supplementary notes). Code and data: https://doi.…

Effective use of battery storage depends on reliable estimation of its state of health (SOH) and state of charge (SOC). Model-based state estimation requires the open-circuit voltage (OCV) curve, which is typically unknown for second-life batteries. We present a framework that jointly estimates the states and parameters of an equivalent circuit model solely from field operation data, using Gaussian process regression to reconstruct the OCV curve. Applied to a real second-life battery system of 27 modules and 324 cells, it reveals SOH heterogeneity, a systematic SOC imbalance, and two faulty cells, all validated against a reference measurement. We aggregate the cell SOH and SOC to module level and benchmark them against a lumped-module model fitted without the individual cell voltages. The lumped-module model follows the average behavior and cannot capture the limiting cells, overestimating SOH by up to 31% and SOC by up to 23%.

0.27

Public Battery Field Data

eess.SY ·2026-10-05 ·Robert Masse
similarity 0.51
Abstract · v3: 35 releases, matching v1.2.0 of the collection

Battery systems and algorithms are developed and evaluated primarily on laboratory cycling data, but fielded battery systems are subjected to duty cycles, temperatures, and measurement conditions that cannot be reproduced in a lab. Field data from batteries in service has begun to appear in public releases attached to individual papers, but each release has its own format, units, labels, and other gaps that make it difficult to compare against others. We present a curated collection of 35 public field-data releases from 27 research groups, covering applications that span passenger EVs, buses, light electric mobility, grid-scale storage, distributed storage, consumer electronics, industrial robotics and satellites. Where the releases are complete enough to measure, this heterogeneous collection contains 256 GB of data from at least 149,188 lithium-ion cells, 3,187 batteries, 115.6 MWh of energy storage capacity, and 3,040 unit-years of service. Critically, it also contains 6,465 labeled or reported faults, which provide greater visibility into what real battery performance and safety issues look like outside the lab. We release a public repository of metadata and code for each of the field datasets. For each dataset it provides a registry entry with sources, license and access links, checksums to confirm a download is complete, a metadata table, and code for how to load it. We also report where released datasets differ from their papers. We hope the collection can help serve researchers (human or otherwise) as a useful platform for improving battery field diagnostics, fault detection and health estimation. Better field evidence can also feed back to improve manufacturing quality, inform second-life screening and residual-value estimates, and broadly accelerate electrification.

0.21