CS Paper Radar

Estimating the Health and State of Charge of Each Cell in a Second-Life Battery System from Field Data

Martin Cornejo, Julian Meyer-Schwickerath, Juan Victor Sandalinas, Andreas Jossen

eess.SY ·submitted 2026-09-03 21:17 UTC · v1
benchmark

Abstract

Effective use of battery storage depends on reliable estimation of its state of health (SOH) and state of charge (SOC). Model-based state estimation requires the open-circuit voltage (OCV) curve, which is typically unknown for second-life batteries. We present a framework that jointly estimates the states and parameters of an equivalent circuit model solely from field operation data, using Gaussian process regression to reconstruct the OCV curve. Applied to a real second-life battery system of 27 modules and 324 cells, it reveals SOH heterogeneity, a systematic SOC imbalance, and two faulty cells, all validated against a reference measurement. We aggregate the cell SOH and SOC to module level and benchmark them against a lumped-module model fitted without the individual cell voltages. The lumped-module model follows the average behavior and cannot capture the limiting cells, overestimating SOH by up to 31% and SOC by up to 23%.

Comment
35 pages, 9 figures, includes supplementary material (10 pages, 9 supplementary figures, 2 supplementary notes). Code and data: https://doi.org/10.5281/zenodo.22281620

Closest papers

Nearest neighbours by meaning across the whole index.

From Laboratory Aging Studies to Field Predictions: Quantifying Uncertainty in Battery Storage Lifetime Predictions

eess.SY ·2026-09-09 ·Melina Graner, Jan Figgener, Andreas Jossen, Holger Hesse
benchmarkcode/data similarity 0.74
Abstract

Predicting how long a battery energy storage system will last is critical for warranty design, maintenance planning and investment decisions, yet degradation models are mostly deterministic and rarely validated against real field data. We apply an open-source probabilistic degradation framework, combined with a cell-to-system approximation, to bridge the gap between cell-level laboratory aging models and system-level field predictions for residential battery energy storage systems with quantified uncertainty. The framework predicts cell-level state-of-health to within 0.4 % mean absolute error, roughly half the error of prior models for this dataset. When applied to field operation data, the framework's predictions are consistent with all three available system-level capacity measurements - a benchmark rarely available for open probabilistic degradation models. Cell-level heterogeneity is approximated by two bounding stress scenarios differing only slightly (a 5 % spread in temperature and a 9 % spread in current). The mean degradation trajectories of the two scenarios reach end-of-life 10 months apart, while the full predicted end-of-life range across both scenarios spans approximately three years, about a third of the expected system lifetime. We link this uncertainty to two drivers. One is a systematic mismatch between laboratory test conditions and field-representative operating stress. The other is variability in the training data itself. These insights translate into concrete, resource-efficient recommendations for future aging study design, supporting more confident predictions of battery lifetime under real-world conditions.

0.17

A Hybrid State Space-Attention Architecture for Forecasting the Trajectories of Battery Degradation

cs.AI physics.chem-ph ·2026-11-14 ·Shrey Patel, Bhargav Srinivas Rao, Samet Ayhan
benchmark similarity 0.67
Abstract

Early-life battery degradation trajectory forecasting aims to predict a battery cell's full state-of-health (SOH) trajectory from its initial charge-discharge cycles, potentially reducing cell qualification and evaluation time from months to days. Despite recent advances, accurate forecasting remains challenging for emerging battery chemistries, data-scarce domains, and cells exhibiting degradation behaviors beyond those observed during training. Existing state-of-the-art approaches increasingly rely on model scaling, large language model-derived aging-condition embeddings, and extensive fold-specific hyperparameter tuning, raising concerns about computational efficiency, reproducibility, and generalization. This work introduces DecayFormer, a compact hybrid state-space and attention architecture designed for early-life degradation trajectory forecasting. DecayFormer combines cycle-level selective recurrence, using a single scalar state per channel, with an attention mechanism queried by the recurrent state. It further incorporates state-of-charge (SOC) interval statistics and a master curve head that jointly estimates a scalar lifetime and a monotonically non-increasing SOH profile parameterized by normalized lifetime. We evaluate DecayFormer on the BatteryLife benchmark using all 22 aging-condition-exclusive folds, with a single run per fold and one fixed configuration across all folds, without fold-specific tuning. DecayFormer achieves mean test MAPE values of 2.25% on Li-ion, 2.76% on CALB, 0.95% on Na-ion, and 7.19% on Zn-ion. These results demonstrate the potential of compact sequence models to deliver accurate early-life degradation forecasts across diverse battery chemistries and aging conditions, without relying on extensive model scaling or per-fold optimization.

0.10

Intelligent Degradation Monitoring in Lithium-ion Batteries via Discharge Incremental Capacity Feature Estimation

eess.SY cs.LGeess.SP ·2026-09-19 ·Amir Madmolilvand, Farzaneh Abdollahi
similarity 0.65
Abstract

Accurate and timely detection of degradation in lithium-ion batteries is crucial to ensure safety, reliability, and longevity in high-demand applications such as electric vehicles and energy storage systems. Traditional incremental capacity (IC) analysis methods require low-current cycling for discharge measurements, limiting their practical use in real-time battery management. This paper proposes a novel neural network-based framework that predicts discharge IC features directly from charging signals, eliminating the need for low-current discharge. Trained on a comprehensive dataset of 53 battery cells cycled under diverse fast-charging protocols, the model demonstrates robust generalization ability, effectively estimating degradation indicators on unseen battery data. Among several architectures evaluated, the LSTM model provides the best balance of prediction accuracy and computational efficiency. The proposed approach enables real-time integration into Battery Management Systems (BMS), enhancing degradation monitoring without disrupting normal battery operation. This paper presents a study to bridge IC analysis with practical, fast-charging scenarios, marking a significant step towards intelligent and scalable battery health monitoring.

0.09

A Repeated Measurements Approach to $SoH$ Battery Modelling of Cyclic Aged Data in a Laboratory Environment

cs.LG stat.MEeess.SY ·2026-08-20 ·Mark Cary, Charles Bokor
similarity 0.64
Abstract · 17 pages, 9 figures, 2 tables

This document describes the application of a first order linearised nonlinear repeated measurements approach to the analysis of battery cell ageing profiles generated under controlled conditions in a laboratory. The primary advantage of the model is it reflects the obvious structure in the data. Consequently, it is a two-component of variance model: variation within ageing profiles (measurement noise) and variation among ageing profiles (test-to-test or cell-to-cell) variation. Novel regularised iterative generalised least squares parameter identification schemes, with optimal hyper-parameter re-estimation, are used to identify the hierarchical nonlinear model. The training data comprised $SoH$ profiles for 10 cells aged at various constant discharge and charge current cycles at a fixed chamber environmental temperature of 25 [$^\circ$C]. Each cell $SoH$ profile is modelled using a simple power law expression, whereas the variation in ageing parameters is modelled using a single knot cubic B-spline. $SoH$ is accurately predicted to $\pm 0.191\%$ for $SOH \in [0,20]$.

0.24

Robust State-Parameter Estimation in Second-Order Thévenin Batteries

eess.SY math.OC ·2026-11-09 ·Wissam Khennoune, G. Q. Bao Tran, Thach Ngoc Dinh, Jérémy Van Gorp, Mathieu Moze
similarity 0.64
Abstract · Under review for European Control Conference (ECC)

We propose a scheme for estimating the full states and parameters of a second-order Thévenin battery model, using distinct features of the measured current. An identification step, run during suitable rest intervals, identifies the resistances and capacitances of the two RC branches from the voltage relaxation by linear least squares, without knowledge of the open-circuit voltage (OCV) map. An online estimator then runs continuously: the polarization voltages are estimated by open-loop observers; the series resistance is updated at current jumps using least squares; the state of charge (SOC) is propagated by Coulomb counting using the current capacity estimate, and both estimates are updated periodically by a sliding-window regression. We show that the identification is exact under a mild rank condition, that the series resistance is recovered at the first current jump, and that the online state and capacity estimates converge exponentially under verifiable excitation conditions. We also establish robustness of the online estimator under bounded process disturbances and measurement noise.

0.26

Real-Time State-of-Health Estimation and Online Degradation Prognosis from Partial Battery Discharge Using Physics-Informed Neural Networks

cs.LG ·2026-08-14 ·Begoña Ispizua, Serio Gil-López, Leire Arrizabalaga, Ibai Laña
similarity 0.63
Abstract

With the increasing integration of renewable energy sources, energy storage systems have become essential, making the accurate estimation of their State of Health (SOH) and degradation behavior critical. In this work, we propose a physics-informed deep learning approach for lithium-ion battery SOH prediction using incomplete discharge curves extracted from arbitrary voltage ranges, thereby reflecting realistic and heterogeneous operating conditions. The proposed method combines data-driven learning with physically motivated degradation dynamics to ensure consistent and reliable SOH estimation from partial discharge information, achieving a MAPE below 4$\%$. In addition, a real-time degradation trend estimation strategy is introduced to detect key aging transitions without requiring prior knowledge or historical data, making it applicable to a wide range of batteries. Overall, our approach enables SOH estimation from arbitrary discharge segments and a real-time degradation forecast that continuously integrates all usage, overcoming previous methods that rely on fixed protocols or early, non-adaptive predictions.

0.04

Relative Discharge Stage (RDS) Classification: A Practical Indicator of Battery Discharge Progress

cs.LG ·2026-09-23 ·Khoa Tran, Tri Le, Hung-Cuong Trinh, Hung Tran-Nam
similarity 0.63
Abstract

Accurate remaining discharge time (RDT) prediction is challenging in real-world battery applications because future load profiles are unknown and highly dynamic. To address the uncertainty of continuous RDT regression, this paper introduces Relative Discharge Stage (RDS), a battery-management indicator that represents the remaining discharge condition using five interpretable classes: Normal, Good, Moderate, Low, and Recharge Required. Unlike state of charge (SOC), which reflects the current charge level, RDS characterizes the remaining discharge process without requiring future-current information during inference. A physics-informed RDS classification framework is proposed, combining SOC estimation with lightweight temporal learning. The SOC-estimation component includes second-order ECM state and terminal-voltage prediction, hysteresis and OCV temperature correction, core-temperature estimation, and AEKF state correction, supported by OCV evaluation, online STC-ECM parameter adaptation, and pretrained neural residual-voltage correction. The measured current, terminal voltage, surface temperature, and estimated SOC are arranged into a sliding observation window and processed by a lightweight temporal convolutional network. Experiments on two public lithium-ion battery datasets demonstrate robust RDS classification, with accuracy exceeding 80% under varying load and thermal conditions.

0.04

STEK: Structural-Terrain-Enhanced Koopman-Inspired Cross-Channel Regularization for Retrospective Battery Multi-Target Estimation

cs.AI ·2026-11-04 ·Jing Wang, Shiyuan Piao, Fugee Tsung
similarity 0.63
Abstract · 18 pages, 4figures

Retrospective battery characterization across heterogeneous cells is challenging because cycling records vary substantially with chemistry, protocol, cell format, capacity, and operating conditions. An endpoint charge--discharge curve captures the local condition of an evaluated cycle, while a cell-level lifecycle terrain summarizes structural evolution across the archived trajectory. We propose STEK, a structural-terrain-enhanced framework for retrospective battery multi-target estimation. STEK combines a cell-level lifecycle (dQ/dV) terrain with an endpoint-derived structural proxy through quality-proxy-conditioned gating. Bounded FiLM and a validity-gated residual head refine the endpoint-curve representation while preserving a curve-based prediction pathway. Battery-type and optional material-text representations further condition an identity-centered low-rank linear map, providing a Koopman-inspired cross-channel consistency objective without modeling temporal dynamics or performing rollout. Under the fixed seven-output MIX-battery protocol, the full retrospective setting improves aggregate performance over endpoint-only learned baselines across multiple temporal backbones; this comparison reflects both the additional archived context and the modeling design. Under matched auxiliary inputs, STEK outperforms direct concatenation and quality-unaware FiLM, while descriptor-removal tests show graceful fallback to the endpoint pathway. Deterministic rules remain preferable for directly recoverable capacity summaries. The method targets retrospective archive harmonization rather than online estimation from cycle t alone.

0.26