CS Paper Radar

From Laboratory Aging Studies to Field Predictions: Quantifying Uncertainty in Battery Storage Lifetime Predictions

Melina Graner, Jan Figgener, Andreas Jossen, Holger Hesse

eess.SY ·submitted 2026-09-09 13:53 UTC · v1
benchmarkcode/data

Abstract

Predicting how long a battery energy storage system will last is critical for warranty design, maintenance planning and investment decisions, yet degradation models are mostly deterministic and rarely validated against real field data. We apply an open-source probabilistic degradation framework, combined with a cell-to-system approximation, to bridge the gap between cell-level laboratory aging models and system-level field predictions for residential battery energy storage systems with quantified uncertainty. The framework predicts cell-level state-of-health to within 0.4 % mean absolute error, roughly half the error of prior models for this dataset. When applied to field operation data, the framework's predictions are consistent with all three available system-level capacity measurements - a benchmark rarely available for open probabilistic degradation models. Cell-level heterogeneity is approximated by two bounding stress scenarios differing only slightly (a 5 % spread in temperature and a 9 % spread in current). The mean degradation trajectories of the two scenarios reach end-of-life 10 months apart, while the full predicted end-of-life range across both scenarios spans approximately three years, about a third of the expected system lifetime. We link this uncertainty to two drivers. One is a systematic mismatch between laboratory test conditions and field-representative operating stress. The other is variability in the training data itself. These insights translate into concrete, resource-efficient recommendations for future aging study design, supporting more confident predictions of battery lifetime under real-world conditions.

Closest papers

Nearest neighbours by meaning across the whole index.

Estimating the Health and State of Charge of Each Cell in a Second-Life Battery System from Field Data

eess.SY ·2026-09-03 ·Martin Cornejo, Julian Meyer-Schwickerath, Juan Victor Sandalinas, Andreas Jossen
benchmark similarity 0.74
Abstract · 35 pages, 9 figures, includes supplementary material (10 pages, 9 supplementary figures, 2 supplementary notes). Code and data: https://doi.…

Effective use of battery storage depends on reliable estimation of its state of health (SOH) and state of charge (SOC). Model-based state estimation requires the open-circuit voltage (OCV) curve, which is typically unknown for second-life batteries. We present a framework that jointly estimates the states and parameters of an equivalent circuit model solely from field operation data, using Gaussian process regression to reconstruct the OCV curve. Applied to a real second-life battery system of 27 modules and 324 cells, it reveals SOH heterogeneity, a systematic SOC imbalance, and two faulty cells, all validated against a reference measurement. We aggregate the cell SOH and SOC to module level and benchmark them against a lumped-module model fitted without the individual cell voltages. The lumped-module model follows the average behavior and cannot capture the limiting cells, overestimating SOH by up to 31% and SOC by up to 23%.

0.27

TREDD: Robust Trend-Based Reference Evaluation for Interpretable Degradation Detection

eess.SY ·2026-09-14 ·Elisabeth Vogel, Ronny Porsch, Peter Langendoerfer
similarity 0.73
Abstract · 7 Pages, 2 figures, Conference: IECON 2026 (18 to 21 October 2026)

Technical systems are increasingly monitored using sensor and operational data to detect degradation and performance deterioration at an early stage. However, observed trends in measurement data do not necessarily correspond to physical aging, since noise, outliers, unstable initial regions, or changing operating conditions may produce similar patterns. This paper proposes Trend-based Reference Evaluation for Degradation Detection (TREDD), an interpretable method for detecting degradation as a persistent, trend-based deviation from an early reference state. TREDD combines rolling-window smoothing, baseline estimation, a direction-dependent degradation index, long-term trend extraction, and persistent drift detection. In addition, the method separates computational drift detection from the interpretation of drift as plausible physical aging by incorporating data-quality assessment, context checking, and robust auxiliary analysis. The approach is evaluated on the NASA Lithium-Ion Battery Aging Dataset using discharge-cycle capacity as the degradation-relevant condition variable. The representative case study illustrates that TREDD can identify clear degradation trajectories while assigning reduced confidence to weak, gradual, or atypical trends. The method therefore supports transparent and confidence-based degradation interpretation rather than purely predictive battery health estimation.

0.13

Assessing Modeling Fidelity for Long-Term Battery Energy Storage Planning: Operation, Degradation, and Temporal Representation

eess.SY ·2026-09-30 ·Hassan Zahid Butt, Xingpeng Li
similarity 0.72
Abstract

Long-term battery energy storage system (BESS) planning often relies on simplified degradation, operational, and temporal representations to maintain computational tractability, yet their effects on lifecycle conclusions are not well understood. This paper assesses the modeling fidelity needed for long-term lifecycle evaluation of BESS designs used in planning studies. A 20-year grid-connected microgrid is sized using a degradation-naive planning model, after which the installed portfolio is fixed and evaluated through sequential lifecycle validation. The reference representation combines nonlinear calendar and cycle aging, C-rate-dependent efficiencies, state-of-health-dependent performance, self-discharge, battery replacement, and full 8,760-h chronology. Battery-model hierarchies, targeted ablations, linear degradation surrogates, health-update intervals, temporal reductions, and combined simplifications are compared using lifecycle cost, replacement timing, state of health, and energy adequacy. The reference case produces replacements in years 9 and 18, a $111.25 million lifecycle net present cost, and 24.01 MWh of cumulative energy not served. Omitting calendar aging eliminates both replacements and understates lifecycle cost by 35.1%, whereas a separately calibrated linear surrogate model reproduces both replacement years and limits the cost deviation to 0.2%, although energy not served remains 31.8% below the reference. A peak-informed calibrated 12-day representation preserves replacement timing but reports zero energy not served, while replacing the preserved peak day with the maximum daily-energy-deficit day substantially overstates energy not served because representative-day closure alters the battery state surrounding the critical event. The results show that modeling fidelity is metric-dependent and should be selected according to the lifecycle outcome to be preserved.

0.10

A Hybrid State Space-Attention Architecture for Forecasting the Trajectories of Battery Degradation

cs.AI physics.chem-ph ·2026-11-14 ·Shrey Patel, Bhargav Srinivas Rao, Samet Ayhan
benchmark similarity 0.71
Abstract

Early-life battery degradation trajectory forecasting aims to predict a battery cell's full state-of-health (SOH) trajectory from its initial charge-discharge cycles, potentially reducing cell qualification and evaluation time from months to days. Despite recent advances, accurate forecasting remains challenging for emerging battery chemistries, data-scarce domains, and cells exhibiting degradation behaviors beyond those observed during training. Existing state-of-the-art approaches increasingly rely on model scaling, large language model-derived aging-condition embeddings, and extensive fold-specific hyperparameter tuning, raising concerns about computational efficiency, reproducibility, and generalization. This work introduces DecayFormer, a compact hybrid state-space and attention architecture designed for early-life degradation trajectory forecasting. DecayFormer combines cycle-level selective recurrence, using a single scalar state per channel, with an attention mechanism queried by the recurrent state. It further incorporates state-of-charge (SOC) interval statistics and a master curve head that jointly estimates a scalar lifetime and a monotonically non-increasing SOH profile parameterized by normalized lifetime. We evaluate DecayFormer on the BatteryLife benchmark using all 22 aging-condition-exclusive folds, with a single run per fold and one fixed configuration across all folds, without fold-specific tuning. DecayFormer achieves mean test MAPE values of 2.25% on Li-ion, 2.76% on CALB, 0.95% on Na-ion, and 7.19% on Zn-ion. These results demonstrate the potential of compact sequence models to deliver accurate early-life degradation forecasts across diverse battery chemistries and aging conditions, without relying on extensive model scaling or per-fold optimization.

0.08

Real-Time State-of-Health Estimation and Online Degradation Prognosis from Partial Battery Discharge Using Physics-Informed Neural Networks

cs.LG ·2026-08-14 ·Begoña Ispizua, Serio Gil-López, Leire Arrizabalaga, Ibai Laña
similarity 0.70
Abstract

With the increasing integration of renewable energy sources, energy storage systems have become essential, making the accurate estimation of their State of Health (SOH) and degradation behavior critical. In this work, we propose a physics-informed deep learning approach for lithium-ion battery SOH prediction using incomplete discharge curves extracted from arbitrary voltage ranges, thereby reflecting realistic and heterogeneous operating conditions. The proposed method combines data-driven learning with physically motivated degradation dynamics to ensure consistent and reliable SOH estimation from partial discharge information, achieving a MAPE below 4$\%$. In addition, a real-time degradation trend estimation strategy is introduced to detect key aging transitions without requiring prior knowledge or historical data, making it applicable to a wide range of batteries. Overall, our approach enables SOH estimation from arbitrary discharge segments and a real-time degradation forecast that continuously integrates all usage, overcoming previous methods that rely on fixed protocols or early, non-adaptive predictions.

0.04

FlowBatt: Flow Matching for Probabilistic Battery Degradation Prediction

cs.LG physics.chem-ph ·2026-11-02 ·Hamidreza Eivazi, Eslam Sharaawy, Stefan Wittek, André Hebenbrock, Raphael Ginster +1 more
top venuebenchmark similarity 0.69
Abstract · 29 pages, including references, appendices, and the checklist

Battery degradation remains a central challenge in the development and broad application of sustainable energy technologies. Accurate degradation prediction is challenging, as battery aging emerges from complex and heterogeneous interactions among cycling behavior, operating conditions, and cell chemistry. Existing machine-learning approaches typically focus on deterministic end-of-life predictions or modeling degradation curves within fixed chemistry settings, leaving probabilistic state of health (SOH) trajectory modeling across heterogeneous chemistries underexplored. We introduce FlowBatt, a use-inspired conditional generative framework that adapts flow matching with a diffusion transformer (DiT) backbone to battery degradation trajectory modeling. FlowBatt models full SOH trajectories as probabilistic degradation processes conditioned on early-cycle capacity data. To strengthen this conditioning pathway, we use explainable AI analysis to diagnose and improve the encoder that maps early-cycle capacity matrices into conditioning vectors. We evaluate FlowBatt on five public benchmark settings spanning diverse chemistries and aging conditions, comparing it with supervised and diffusion-based trajectory models as well as established baselines for remaining useful life (RUL) prediction under shared data splits. FlowBatt achieves the best trajectory-wise SOH prediction performance on all five datasets, with errors below 2.5%, and delivers competitive RUL prediction performance. By generating multiple plausible trajectories, FlowBatt provides empirical prediction intervals for battery degradation modeling. These results indicate that flow-matching-based trajectory modeling is a promising framework for probabilistic battery health prediction.

0.38

A Framework for Discharge Time Prediction of Energy Storage Units Based on Coupled Dynamics and Multi-Factor Aging Models

cs.CE ·2026-09-10 ·Jiaye Yang, Hansheng Su, Wangzi Zhu
published similarity 0.69
Abstract · 6 pages, 4 figures. Accepted for presentation at the 2026 IEEE Industrial Electronics and Applications Conference (IEACon 2026)

This paper presents a physically interpretable framework for predicting time to empty (TTE) in portable embedded systems. The framework couples usage-driven load-power decomposition, electrical power-voltage-current closure, a semi-empirical aging model, and SOC-temperature dynamics. Smartphone telemetry is mapped to battery current through an interpretable load model and conversion-efficiency correction. Battery capacity loss is modeled by combining Arrhenius temperature dependence, SEI diffusion behavior, and cycle-related power-law degradation. The coupled dynamic model then predicts TTE under different initial SOC values, ambient temperatures, and usage profiles. Chronological hold-out evaluation on a 6.9-h smartphone discharge session yielded a current RMSE of 0.0095 $\pm$ 0.0006 A, a temperature RMSE of 2.93 $\pm$ 0.24$^\circ$C, and a TTE MAPE of 4.81 $\pm$ 0.61%. Evaluation on NASA cell B0005 produced a capacity-loss RMSE of 0.031 Ah. Baseline, ablation, and counterfactual analyses further illustrate the contributions of thermal and aging corrections and the relative influence of load features. The results demonstrate the feasibility and interpretability of the proposed framework, while broader validation across devices and batteries remains necessary.

0.34

Single-Cycle Battery Remaining Useful Life Prediction with Compressed Continuous Wavelet Features and Deep Neural Networks

cs.LG cs.AI ·2026-10-25 ·Sungeun Kim, Mingyu Jung, Yuri Kim, Jin-Sung Park, Jongbin Ryu
publishedbenchmark similarity 0.67
Abstract

Lithium-ion batteries are widely used in industrial applications, but their performance gradually degrades over time, making accurate lifetime prediction important for safety and reliability. However, reliable lifetime assessment generally requires extensive degradation testing, which is both costly and time-consuming. To reduce this burden, recent data-driven approaches have sought to predict the end-of-life cycle of batteries from only the initial few cycles. Nevertheless, identifying reliable degradation patterns from such limited early-cycle data remains challenging because early aging dynamics are often subtle and nonlinear. To address this issue, we adopt the continuous wavelet transform to convert cycle-wise voltage, current, and capacity signals into time-frequency representations, enabling multi-resolution characterization of degradation behavior. Building on this representation, we apply scale compression to reduce redundancy while preserving structural information in the scalograms. We evaluate the proposed framework on eight benchmark datasets derived from seven public battery datasets covering diverse electrode chemistries, cell form factors, and cycling protocols. Experimental results show that the proposed framework consistently outperforms prior approaches in single-cycle remaining useful life prediction and remains robust as the number of input cycles increases from 1 to 100. In addition, redundancy-fidelity analysis characterizes the trade-off introduced by scale compression, and gradient-based visual explanations indicate that the model focuses on localized time-frequency regions associated with structured signal transitions during charge-discharge operation. These results demonstrate the effectiveness and interpretability of the proposed framework for early-cycle battery remaining useful life prediction.

0.23