CS Paper Radar

Assessing Modeling Fidelity for Long-Term Battery Energy Storage Planning: Operation, Degradation, and Temporal Representation

Hassan Zahid Butt, Xingpeng Li

eess.SY ·submitted 2026-09-30 16:32 UTC · v1

Abstract

Long-term battery energy storage system (BESS) planning often relies on simplified degradation, operational, and temporal representations to maintain computational tractability, yet their effects on lifecycle conclusions are not well understood. This paper assesses the modeling fidelity needed for long-term lifecycle evaluation of BESS designs used in planning studies. A 20-year grid-connected microgrid is sized using a degradation-naive planning model, after which the installed portfolio is fixed and evaluated through sequential lifecycle validation. The reference representation combines nonlinear calendar and cycle aging, C-rate-dependent efficiencies, state-of-health-dependent performance, self-discharge, battery replacement, and full 8,760-h chronology. Battery-model hierarchies, targeted ablations, linear degradation surrogates, health-update intervals, temporal reductions, and combined simplifications are compared using lifecycle cost, replacement timing, state of health, and energy adequacy. The reference case produces replacements in years 9 and 18, a $111.25 million lifecycle net present cost, and 24.01 MWh of cumulative energy not served. Omitting calendar aging eliminates both replacements and understates lifecycle cost by 35.1%, whereas a separately calibrated linear surrogate model reproduces both replacement years and limits the cost deviation to 0.2%, although energy not served remains 31.8% below the reference. A peak-informed calibrated 12-day representation preserves replacement timing but reports zero energy not served, while replacing the preserved peak day with the maximum daily-energy-deficit day substantially overstates energy not served because representative-day closure alters the battery state surrounding the critical event. The results show that modeling fidelity is metric-dependent and should be selected according to the lifecycle outcome to be preserved.

Closest papers

Nearest neighbours by meaning across the whole index.

From Laboratory Aging Studies to Field Predictions: Quantifying Uncertainty in Battery Storage Lifetime Predictions

eess.SY ·2026-09-09 ·Melina Graner, Jan Figgener, Andreas Jossen, Holger Hesse
benchmarkcode/data similarity 0.72
Abstract

Predicting how long a battery energy storage system will last is critical for warranty design, maintenance planning and investment decisions, yet degradation models are mostly deterministic and rarely validated against real field data. We apply an open-source probabilistic degradation framework, combined with a cell-to-system approximation, to bridge the gap between cell-level laboratory aging models and system-level field predictions for residential battery energy storage systems with quantified uncertainty. The framework predicts cell-level state-of-health to within 0.4 % mean absolute error, roughly half the error of prior models for this dataset. When applied to field operation data, the framework's predictions are consistent with all three available system-level capacity measurements - a benchmark rarely available for open probabilistic degradation models. Cell-level heterogeneity is approximated by two bounding stress scenarios differing only slightly (a 5 % spread in temperature and a 9 % spread in current). The mean degradation trajectories of the two scenarios reach end-of-life 10 months apart, while the full predicted end-of-life range across both scenarios spans approximately three years, about a third of the expected system lifetime. We link this uncertainty to two drivers. One is a systematic mismatch between laboratory test conditions and field-representative operating stress. The other is variability in the training data itself. These insights translate into concrete, resource-efficient recommendations for future aging study design, supporting more confident predictions of battery lifetime under real-world conditions.

0.17

Optimal Day-Ahead Scheduling of Fast EV Charging Station With Multi-Stage Battery Degradation Model

eess.SY ·2026-09-17 ·Y. Wan, D. Gebbran, R. K. Subroto, T. Dragičević
top venuehighly cited similarity 0.70
Abstract

The paper proposes a day-ahead scheduling framework with a novel multi-stage battery degradation modeling method for an electric vehicle (EV) fast charging station (FCS) equipped with a battery energy storage system (BESS). Unlike previous studies, which employ a single battery degradation model to represent the aging process, this paper proposes a novel multi-stage battery degradation modeling method to accurately capture the degradation process across the whole lifespan. Subsequently, the multi-stage model is explicitly integrated into the proposed adaptive optimization framework in a computationally tractable way, thus having important practical implications in the field. The paper provides case studies to demonstrate the effectiveness of the proposed modeling method on a selected cycle aging model in reducing the operation cost of FCS with BESS operating in different stages. As a result, the overall operation cost with the multi-stage model is around 2.1% on average lower than the single-stage model counterpart. In addition, results show that with the increasing number of divided stages, the model error decreases and becomes stable, while the reduced operation cost compared with the single-stage model increases and saturates. Finally, we apply the multi-stage framework considering other conventional degradation models to show the superiority of the proposed method.

0.68

A Hybrid State Space-Attention Architecture for Forecasting the Trajectories of Battery Degradation

cs.AI physics.chem-ph ·2026-11-14 ·Shrey Patel, Bhargav Srinivas Rao, Samet Ayhan
benchmark similarity 0.65
Abstract

Early-life battery degradation trajectory forecasting aims to predict a battery cell's full state-of-health (SOH) trajectory from its initial charge-discharge cycles, potentially reducing cell qualification and evaluation time from months to days. Despite recent advances, accurate forecasting remains challenging for emerging battery chemistries, data-scarce domains, and cells exhibiting degradation behaviors beyond those observed during training. Existing state-of-the-art approaches increasingly rely on model scaling, large language model-derived aging-condition embeddings, and extensive fold-specific hyperparameter tuning, raising concerns about computational efficiency, reproducibility, and generalization. This work introduces DecayFormer, a compact hybrid state-space and attention architecture designed for early-life degradation trajectory forecasting. DecayFormer combines cycle-level selective recurrence, using a single scalar state per channel, with an attention mechanism queried by the recurrent state. It further incorporates state-of-charge (SOC) interval statistics and a master curve head that jointly estimates a scalar lifetime and a monotonically non-increasing SOH profile parameterized by normalized lifetime. We evaluate DecayFormer on the BatteryLife benchmark using all 22 aging-condition-exclusive folds, with a single run per fold and one fixed configuration across all folds, without fold-specific tuning. DecayFormer achieves mean test MAPE values of 2.25% on Li-ion, 2.76% on CALB, 0.95% on Na-ion, and 7.19% on Zn-ion. These results demonstrate the potential of compact sequence models to deliver accurate early-life degradation forecasts across diverse battery chemistries and aging conditions, without relying on extensive model scaling or per-fold optimization.

0.08

A Framework for Discharge Time Prediction of Energy Storage Units Based on Coupled Dynamics and Multi-Factor Aging Models

cs.CE ·2026-09-10 ·Jiaye Yang, Hansheng Su, Wangzi Zhu
published similarity 0.65
Abstract · 6 pages, 4 figures. Accepted for presentation at the 2026 IEEE Industrial Electronics and Applications Conference (IEACon 2026)

This paper presents a physically interpretable framework for predicting time to empty (TTE) in portable embedded systems. The framework couples usage-driven load-power decomposition, electrical power-voltage-current closure, a semi-empirical aging model, and SOC-temperature dynamics. Smartphone telemetry is mapped to battery current through an interpretable load model and conversion-efficiency correction. Battery capacity loss is modeled by combining Arrhenius temperature dependence, SEI diffusion behavior, and cycle-related power-law degradation. The coupled dynamic model then predicts TTE under different initial SOC values, ambient temperatures, and usage profiles. Chronological hold-out evaluation on a 6.9-h smartphone discharge session yielded a current RMSE of 0.0095 $\pm$ 0.0006 A, a temperature RMSE of 2.93 $\pm$ 0.24$^\circ$C, and a TTE MAPE of 4.81 $\pm$ 0.61%. Evaluation on NASA cell B0005 produced a capacity-loss RMSE of 0.031 Ah. Baseline, ablation, and counterfactual analyses further illustrate the contributions of thermal and aging corrections and the relative influence of load features. The results demonstrate the feasibility and interpretability of the proposed framework, while broader validation across devices and batteries remains necessary.

0.34

Joint Remaining Useful Life Prediction and Capacity Estimation of Lithium-Ion Batteries Using Partial-Charging Data

cs.LG ·2026-09-18 ·Khoa Tran, Ho-Si-Hung Nguyen, Phone Wai Yan Moe, Hung-Cuong Trinh, Thi-Hoang-Giang Tran
similarity 0.64
Abstract

Joint remaining useful life (RUL) prediction and capacity estimation require representations of both gradual degradation and recent battery behavior. This paper presents a cross-expert framework using partial-charging measurements without requiring measured historical full-cycle capacity as an input. The RUL Expert captures long-term degradation from nominal 10-min segments sampled across a 30-cycle history, while the Capacity Expert characterizes recent battery behavior from statistical descriptors of nominal 40-min segments over ten consecutive cycles. Their complementary representations are integrated through feature-wise linear modulation for joint RUL and capacity prediction. A key contribution is a three-stage training strategy that progressively controls frozen and trainable components: supervised representation pretraining, independent expert pretraining, and final fusion training with both experts frozen. This staged optimization preserves expert-specific degradation knowledge while improving the balance between the two prediction tasks, with RUL treated as the primary prognostic objective. On two public battery-aging datasets, the reference configuration achieves mean RUL root-mean-square errors of 143.69 and 161.10 cycles and capacity errors of 12.36 and 7.28 mAh, respectively. On Dataset I, cross-expert fusion reduces both mean errors relative to either standalone expert. The proposed framework achieves the lowest reported RUL RMSE among the compared methods on both datasets while maintaining competitive capacity-estimation accuracy.

0.20

The Impact of PV Generation Forecast and Multi-Objective Control Policy on Optimal Operation of Grid Connected PV-BESS Microgrid

eess.SY ·2026-08-26 ·Berhane Darsene Dimd, Steve Voller, Ole-Morten Midtgård
similarity 0.63
Abstract

The variability of photovoltaic (PV) generation poses significant challenges to the reliable and efficient operation of grid-connected microgrids. Accurate PV output power forecasting and efficient energy scheduling strategies are essential not only for optimizing PV system operation but also for improving the overall performance and reliability of the system. This study proposes a long short-term memory (LSTM)-based PV power forecasting model integrated with a multi-objective scheduling framework for a grid-connected PV-battery energy storage system (BESS). The proposed approach enables detailed performance monitoring and assessment by quantifying how PV forecast accuracy influences key operational metrics, including PV self-consumption ratio, grid energy cost, grid injection, and battery utilization. Three forecasting scenarios (perfect forecast, persistence model, and LSTM-based forecast) are compared to evaluate their impact on system performance and operational reliability. Results show that the LSTM-based forecast reduces root mean squared error (RMSE) by 6% compared with the persistence model, increases the PV self-consumption ratio from 78.1% to 84.5%, and reduces grid injections by 82%. The analysis also highlights trade-offs, as higher battery throughput associated with improved performance may contribute to accelerated aging. These findings demonstrate the importance of accurate PV forecasting in improving system performance and ensuring reliable operation. Future work will focus on probabilistic forecasting to properly quantify uncertainties, incorporate load prediction, and develop smart control strategies that allow grid-support functionalities from the PV side.

0.32

Reliability Value of Long-Duration Energy Storage against Extreme Events in High-Renewable Grids: A Full-Year AC-OPF Assessment

eess.SY ·2026-09-06 ·Jeongdong Kim, Jonggeol Na, Sungho Shin
similarity 0.61
Abstract · 39 pages, 12 figures

Long-duration energy storage (LDES) can mitigate prolonged renewable--load imbalances during Dunkelflaute events, but existing studies rely on zonal or linearized DC network models and inadequately analyze the operational feasibility of the grid across a wide range of full-year renewable, load, and contingency scenarios. To address this gap, this paper introduces a multi-period alternating-current optimal power flow (AC-OPF) formulation that captures the full nonlinear network physics and assesses the reliability value of LDES in high-renewable grids. To evaluate scarcity events spanning multiple days to weeks, full-year operation is modeled as an 8,760-h load-shedding minimization over scenarios sampled from a Gaussian copula model, fitted to 2010--2025 historical wind and bus-level load data, that represents both typical variability and tail events. On a synthetic 200-bus Illinois transmission network, a hybrid fleet of battery energy storage (BESS) and LDES with 50 MW total power reduces annual load shedding by 83.0% on average relative to the base network, versus 68.5% for short-duration BESS alone at equal power. To further account for unexpected line outages throughout the year, the formulation is extended to a multi-day security-constrained AC-OPF. Under N-1contingencies, no feasible operating solution is obtained for the base network, whereas the LDES-equipped network remains feasible in all considered cases, thereby saving the cost of additional generation and transmission capacity. During the contingency period, LDES acts as a backup power supply, requiring only 5.5% more generation on average than the no-contingency base case.

0.21

Battery Second Life : A Review of Experimental Studies

eess.SY ·2026-10-08 ·Marwan Hassini, Eduardo Redondo-Iglesias, Pascal Venet
survey similarity 0.61
Abstract

As electric vehicle volume increase, the interest for reusing their retired batteries grow. Giving a second life to batteries reduce their environmental impact and provide access to more affordable energy storage systems. This lifespan extension is of interest in a wide range of fields as the reuse offer a solution for end-of-life batteries management and the development of renewable energies. Although several review articles have described opportunities and barriers related to reuse, to our knowledge none have synthesized insights from studies that conducted experiments on retired batteries. This article aims to address this gap by providing a detailed analysis of more than 150 articles. This article's main findings are the proposition of a new vocabulary for batteries end-of-life, an evaluation of state of health and dispersion in retired batteries as well as the synthesis of aging and safety studies on these batteries. In a nutshell, this review show that the performance of retired batteries can be high, their dispersion should be managed and their degradation can be slow and safe. Limitations of current battery research ideas for future experiments and ideas for future studies are also presented.

0.20