CS Paper Radar

Optimal Day-Ahead Scheduling of Fast EV Charging Station With Multi-Stage Battery Degradation Model

Y. Wan, D. Gebbran, R. K. Subroto, T. Dragičević

eess.SY ·submitted 2026-09-17 18:05 UTC · v1
top venuehighly cited

Abstract

The paper proposes a day-ahead scheduling framework with a novel multi-stage battery degradation modeling method for an electric vehicle (EV) fast charging station (FCS) equipped with a battery energy storage system (BESS). Unlike previous studies, which employ a single battery degradation model to represent the aging process, this paper proposes a novel multi-stage battery degradation modeling method to accurately capture the degradation process across the whole lifespan. Subsequently, the multi-stage model is explicitly integrated into the proposed adaptive optimization framework in a computationally tractable way, thus having important practical implications in the field. The paper provides case studies to demonstrate the effectiveness of the proposed modeling method on a selected cycle aging model in reducing the operation cost of FCS with BESS operating in different stages. As a result, the overall operation cost with the multi-stage model is around 2.1% on average lower than the single-stage model counterpart. In addition, results show that with the increasing number of divided stages, the model error decreases and becomes stable, while the reduced operation cost compared with the single-stage model increases and saturates. Finally, we apply the multi-stage framework considering other conventional degradation models to show the superiority of the proposed method.

Journal ref
IEEE Transactions on Energy Conversion, 2024
DOI
10.1109/TEC.2023.3335661

Closest papers

Nearest neighbours by meaning across the whole index.

Assessing Modeling Fidelity for Long-Term Battery Energy Storage Planning: Operation, Degradation, and Temporal Representation

eess.SY ·2026-09-30 ·Hassan Zahid Butt, Xingpeng Li
similarity 0.70
Abstract

Long-term battery energy storage system (BESS) planning often relies on simplified degradation, operational, and temporal representations to maintain computational tractability, yet their effects on lifecycle conclusions are not well understood. This paper assesses the modeling fidelity needed for long-term lifecycle evaluation of BESS designs used in planning studies. A 20-year grid-connected microgrid is sized using a degradation-naive planning model, after which the installed portfolio is fixed and evaluated through sequential lifecycle validation. The reference representation combines nonlinear calendar and cycle aging, C-rate-dependent efficiencies, state-of-health-dependent performance, self-discharge, battery replacement, and full 8,760-h chronology. Battery-model hierarchies, targeted ablations, linear degradation surrogates, health-update intervals, temporal reductions, and combined simplifications are compared using lifecycle cost, replacement timing, state of health, and energy adequacy. The reference case produces replacements in years 9 and 18, a $111.25 million lifecycle net present cost, and 24.01 MWh of cumulative energy not served. Omitting calendar aging eliminates both replacements and understates lifecycle cost by 35.1%, whereas a separately calibrated linear surrogate model reproduces both replacement years and limits the cost deviation to 0.2%, although energy not served remains 31.8% below the reference. A peak-informed calibrated 12-day representation preserves replacement timing but reports zero energy not served, while replacing the preserved peak day with the maximum daily-energy-deficit day substantially overstates energy not served because representative-day closure alters the battery state surrounding the critical event. The results show that modeling fidelity is metric-dependent and should be selected according to the lifecycle outcome to be preserved.

0.10

Joint Remaining Useful Life Prediction and Capacity Estimation of Lithium-Ion Batteries Using Partial-Charging Data

cs.LG ·2026-09-18 ·Khoa Tran, Ho-Si-Hung Nguyen, Phone Wai Yan Moe, Hung-Cuong Trinh, Thi-Hoang-Giang Tran
similarity 0.61
Abstract

Joint remaining useful life (RUL) prediction and capacity estimation require representations of both gradual degradation and recent battery behavior. This paper presents a cross-expert framework using partial-charging measurements without requiring measured historical full-cycle capacity as an input. The RUL Expert captures long-term degradation from nominal 10-min segments sampled across a 30-cycle history, while the Capacity Expert characterizes recent battery behavior from statistical descriptors of nominal 40-min segments over ten consecutive cycles. Their complementary representations are integrated through feature-wise linear modulation for joint RUL and capacity prediction. A key contribution is a three-stage training strategy that progressively controls frozen and trainable components: supervised representation pretraining, independent expert pretraining, and final fusion training with both experts frozen. This staged optimization preserves expert-specific degradation knowledge while improving the balance between the two prediction tasks, with RUL treated as the primary prognostic objective. On two public battery-aging datasets, the reference configuration achieves mean RUL root-mean-square errors of 143.69 and 161.10 cycles and capacity errors of 12.36 and 7.28 mAh, respectively. On Dataset I, cross-expert fusion reduces both mean errors relative to either standalone expert. The proposed framework achieves the lowest reported RUL RMSE among the compared methods on both datasets while maintaining competitive capacity-estimation accuracy.

0.20

Co-Optimization of Scheduling, Control, and Incentivization of Electric Vehicles for Improving Power System Stability

eess.SY ·2026-10-10 ·Amit Kumer Podder, Tomonori Sadamoto, Aranya Chakrabortty
similarity 0.60
Abstract

We present a finite-horizon, greedy heuristic-based co-optimization and optimal control framework that jointly determines the optimized charging rates, charging times, and an optimal charging control law for electric vehicles (EVs) to improve both voltage stability and small-signal dynamic performance of a power distribution system. The proposed strategy encourages EV drivers to be flexible in choosing their charging rates and times through monetary incentivization under a fixed budget. The design is validated using the IEEE 33-bus distribution system model with ten EV charging stations (EVCSs). Results show that incentivizing drivers to settle for lower charging rates, implemented by a wait-and-save strategy, and rescheduling their charging times strategically can significantly improve the voltage stability index (VSI) of the system as well as the damping factors for the mid-frequency oscillation modes seen in the DC-link bus voltage.

0.20

Degradation Aware V2G Dispatch for Co-Optimization of Parking Facility and Edge Data Center Located in the Airport Campus

eess.SY ·2026-10-17 ·Abdullah Al Mehadi, Hamed Haggi, Chinmay Morankar
similarity 0.59
Abstract

This paper studies an airport campus where long stay EV parking, airport buildings, and an AI data center share a single grid connection. The campus pays a commercial electricity tariff that charges for both the energy used and the highest power drawn during peak hours. Parked EVs can send power back to the campus through vehicle to grid (V2G) chargers and lower this peak. This paper proposes a two stage method. In the first stage, a linear program schedules EV charging and discharging to maximize the operator's profit and also sets a fixed daily payment to EV owners. In the second stage, a search chooses the share of energy savings paid to owners. The model guarantees that every owner is paid enough to take part, pays for battery wear so that EVs discharge only when it is worth the wear, and assigns charging ports on a first come, first served basis. In the case study, 400 V2G chargers are added to 1200 existing Level 2 chargers, serving 5000 expected sessions under summer and winter rates. In a summer week, V2G raises operator profit by $4978 compared with smart charging and lowers the high peak demand by 4400 kW (9%). The best contract gives owners 70% of the energy savings and earns 21% more than a fixed payment alone. Doubling the V2G ports to 800 lowers the peak further but reduces profit, because owner payments grow faster than the savings. V2G pays back within 10 years if a bidirectional charger costs less than about $1800 more than a standard one. Compared with a 5 MW/10 MWh stationary battery, V2G cuts more peak demand at $409 of investment per kW instead of $1522 and needs no extra land, while the battery does not pay back within its lifetime.

0.30

Building Seasonal Highways for Residential Energy Hubs: Sizing, planning and operating thermal energy storage

eess.SY math.OC ·2026-10-01 ·Dario Slaifstein, Mohammad Khosravi, Gautham Ram Chandra Mouli, Laura Ramirez-Elizondo, Pavol Bauer
similarity 0.59
Abstract

The operation of residential energy hubs with multiple energy carriers (electricity, heat, mobility) poses a significant challenge due to the energy storage differences in time-constants, round-trip efficiencies and self-discharge rates. Usually, thermal storage exhibits flexibility in yearly planning optimizations or long-term scenarios. However, as optimization horizons shrink (1-48hs) so does their supplied value due to the lower round-trip efficiencies. To avoid this early depletion during operation this paper proposes a data-driven highway to steer the short-term daily control towards long-term optimality. The proposed methodology also presents how to optimally size the thermal storage and avoid yearly simulations and how all of this is related to nonlinearities in the daily operation. The presented framework links seasonal and daily optimizations through dynamic terminal sets and value functions. The seasonally-aware nonlinear economic model predictive controller achieves the most balanced performance, with the second best mean grid cost of all MPCs at -\texteuro 209. It also achieves better battery degradation control than its linear counterparts (between 26-34%) and the best thermal comfort of the nonlinear benchmarks. Nevertheless, the data-driven seasonal highway restrains the ability to control battery degradation and slightly increases computational time.

0.14

Robust Joint Planning of EV and eBus Charging Infrastructure with PV Self-Consumption under Demand Uncertainty

eess.SY ·2026-08-19 ·Biswarup Mukherjee
benchmark similarity 0.58
Abstract · This manuscript has been submitted for peer review

This paper presents a mixed-integer linear programming (MILP) framework for joint electric vehicle (EV) and electric bus (eBus) charging-infrastructure planning with photovoltaic (PV) self-consumption. The model co-optimizes charger siting, sizing, technology selection, eBus-to-depot assignment, and hourly charging schedules. A deterministic MILP is first formulated as a nominal benchmark and then extended to a scenario-based robust min--max formulation under vehicle energy-demand uncertainty. The robust model uses shared first-stage infrastructure decisions and scenario-specific operating decisions, and minimizes infrastructure cost plus the worst-case scenario operating cost through an epigraph reformulation. Soft-feasibility penalties quantify unmet charging energy, terminal state-of-charge (SOC) shortfall, and capacity violations under stressed scenarios. A 50-node case study shows that route-segment eBus demand and PV weighting alter charger deployment, technology mix, and grid import, while V2G enables hard-feasible robust operation at sufficiently large penalty weights. These results highlight that effective long-term infrastructure planning must simultaneously account for diverse vehicle fleets, operational strategies that adapt to different scenarios, and node-level constraints on charging capacity.

0.19

Intelligent Degradation Monitoring in Lithium-ion Batteries via Discharge Incremental Capacity Feature Estimation

eess.SY cs.LGeess.SP ·2026-09-19 ·Amir Madmolilvand, Farzaneh Abdollahi
similarity 0.58
Abstract

Accurate and timely detection of degradation in lithium-ion batteries is crucial to ensure safety, reliability, and longevity in high-demand applications such as electric vehicles and energy storage systems. Traditional incremental capacity (IC) analysis methods require low-current cycling for discharge measurements, limiting their practical use in real-time battery management. This paper proposes a novel neural network-based framework that predicts discharge IC features directly from charging signals, eliminating the need for low-current discharge. Trained on a comprehensive dataset of 53 battery cells cycled under diverse fast-charging protocols, the model demonstrates robust generalization ability, effectively estimating degradation indicators on unseen battery data. Among several architectures evaluated, the LSTM model provides the best balance of prediction accuracy and computational efficiency. The proposed approach enables real-time integration into Battery Management Systems (BMS), enhancing degradation monitoring without disrupting normal battery operation. This paper presents a study to bridge IC analysis with practical, fast-charging scenarios, marking a significant step towards intelligent and scalable battery health monitoring.

0.09

Hierarchical Control via MPC-RL for Multi-Timescale Battery Systems

eess.SY ·2026-10-02 ·Rasa Pourjam, Ehecatl Antonio del Río Chanona, Paulina Quintanilla
similarity 0.58
Abstract

Multi-timescale systems present a fundamental challenge, where fast operational decisions must coexist with long-horizon sustainability targets. In this work, we propose a new hierarchical control framework via Model Predictive Control (MPC) and Reinforcement Learning (RL) to separate decision-making on two distinct timescales. The high-level MPC optimizes long-horizon setpoints at the slow dynamic and on a fast timescale, a low-level pretrained RL agent tracks these setpoints in real time to maximize short-term objectives. RL is introduced to learn nonlinear control policies, without relying on model linearizations or requiring the heavy online computation from solving repeated optimal control problems. The framework is applied to a Battery Energy Storage System (BESS) operating in frequency regulation markets to balance fast profit opportunities (seconds) and slow battery degradation (weeks to months). The design employs a degradation-aware RL agent trained offline to generate safe long-horizon setpoints, and a degradation-unaware agent fine-tuned from it for fast runtime setpoint tracking. Compared to MPC baselines, the proposed approach successfully extends battery lifetime by 84% and increases operational profit by 34%.

0.17