CS Paper Radar

The Impact of PV Generation Forecast and Multi-Objective Control Policy on Optimal Operation of Grid Connected PV-BESS Microgrid

Berhane Darsene Dimd, Steve Voller, Ole-Morten Midtgård

eess.SY ·submitted 2026-08-26 12:19 UTC · v1

Abstract

The variability of photovoltaic (PV) generation poses significant challenges to the reliable and efficient operation of grid-connected microgrids. Accurate PV output power forecasting and efficient energy scheduling strategies are essential not only for optimizing PV system operation but also for improving the overall performance and reliability of the system. This study proposes a long short-term memory (LSTM)-based PV power forecasting model integrated with a multi-objective scheduling framework for a grid-connected PV-battery energy storage system (BESS). The proposed approach enables detailed performance monitoring and assessment by quantifying how PV forecast accuracy influences key operational metrics, including PV self-consumption ratio, grid energy cost, grid injection, and battery utilization. Three forecasting scenarios (perfect forecast, persistence model, and LSTM-based forecast) are compared to evaluate their impact on system performance and operational reliability. Results show that the LSTM-based forecast reduces root mean squared error (RMSE) by 6% compared with the persistence model, increases the PV self-consumption ratio from 78.1% to 84.5%, and reduces grid injections by 82%. The analysis also highlights trade-offs, as higher battery throughput associated with improved performance may contribute to accelerated aging. These findings demonstrate the importance of accurate PV forecasting in improving system performance and ensuring reliable operation. Future work will focus on probabilistic forecasting to properly quantify uncertainties, incorporate load prediction, and develop smart control strategies that allow grid-support functionalities from the PV side.

Closest papers

Nearest neighbours by meaning across the whole index.

Decision-Focused Learning for Optimal Battery Scheduling Under Load and Photovoltaic Power Uncertainty in Microgrids

eess.SY ·2026-10-10 ·Marios Saleptsis, Antoine Lesage-Landry, Marco Mussetta, Sonia Leva
similarity 0.75
Abstract · 20 pages, 13 figures, submitted to Sustainable Energy, Grids and Networks

The increasing penetration of renewable energy sources in microgrids demands accurate day-ahead forecasting to support optimal battery energy storage system (BESS) scheduling. Yet the conventional predict-then-optimize paradigm trains forecasters on statistical accuracy metrics that are agnostic to the asymmetric and time-varying cost impacts of forecast errors. This work proposes a decision-focused learning (DFL) framework that trains gated recurrent unit forecasters for both load demand and photovoltaic generation directly on the downstream operational cost of a two-stage energy management system, where day-ahead BESS commitments are fixed prior to real-time balancing. Gradients are backpropagated from the real-time operational cost through both optimization stages to the forecaster weights via implicit differentiation, enabling the forecasters to internalize the penalty structure of the scheduling problem. The framework is validated on the MG2Lab experimental microgrid testbed at Politecnico di Milano across two operational scenarios of increasing grid constraint and eight forecasting configurations comprising single-source and combined-forecaster settings. Results illustrate that the DFL-trained pipeline reduces operational cost by 3.78% under normal grid conditions and by 30.60% under grid-constrained conditions relative to the accuracy- optimized baseline, while nearly eliminating load shedding events. Notably, the DFL forecasters exhibit higher statistical errors than their accuracy-trained counterparts yet achieve consistently lower operational costs, confirming that forecast accuracy and decision quality do not share a monotonic relationship in constrained microgrid scheduling.

0.12

Comparative Evaluation of MILP, MPC, and Reinforcement Learning for Commercial Battery Dispatch Under Time-of-Use Tariffs

eess.SY ·2026-09-13 ·Hafiz Majid Hussain, Wajiha Samar, Lurian Klein, Pedro Nardelli
benchmark similarity 0.68
Abstract

Battery energy storage systems (BESS) paired with rooftop photovoltaics (PVs) can deliver measurable cost savings under time-of-use (TOU) electricity tariffs; however, the relative performance of model-based and model-free dispatch strategies remains insufficiently benchmarked on full-year, real-world commercial datasets. This paper presents a full-year (2023) comparative evaluation of three BESS dispatch approaches using data from a commercial PV installation operating under a TOU tariff. The examined strategies include: (i) a mixed-integer linear programming (MILP) formulation with perfect foresight, providing an oracle performance benchmark under the assumed model; (ii) a model predictive control (MPC) scheme based on a day-ahead persistence forecast, representing a low-complexity deployable approach; and (iii) a soft actor-critic (SAC) deep reinforcement learning agent trained under causal information constraints. The MILP benchmark achieves an annual cost reduction of 24.6\% relative to a no-storage baseline. The persistence-based MPC approach recovers 99.2\% of this benchmark using only prior-day data. In contrast, the evaluated SAC agent yields an annual cost higher than the no-storage baseline. This outcome is analyzed in the context of known challenges in reinforcement learning for energy systems, including limited observability and reward design. Overall, the results indicate that, for the studied dataset and tariff structure, persistence-based MPC captures nearly all achievable economic benefits under practical deployment constraints, whereas the considered RL configuration does not yield competitive performance under the same information limitations.

0.21

Energy system device sizing under closed-loop operation with imperfect forecasts

eess.SY ·2026-11-12 ·Cara Koepele, Kevin Wallington, Georgios Mavromatidis, John Lygeros
similarity 0.68
Abstract · 8 pages, 7 figures, 2 tables. Submitted to the 2027 European Control Conference (ECC)

The value of renewable energy devices depends on their operation, which must adapt to weather and demand using limited, imperfect forecasts that update over time. Conventional energy systems planning practices assume unlimited foresight in a single-level formulation, potentially leading to long-term investment in suboptimal device sizes. Accounting for realistic operation corresponds to a bi-level problem: the upper level selects device sizes, while the lower level contains closed-loop operation under evolving forecasts. We solve this problem using backpropagation MPC (BP-MPC), a gradient-based method, with a deterministic MPC as the lower-level controller. Using forecast errors generated by a parameterized martingale model of forecast evolution, we investigate how forecast accuracy affects the benefits of operation-aware energy systems planning and the resulting device sizes. In a case study of an energy system comprising photovoltaics, a battery, a heat pump, and thermal storage with uncertain weather and energy demands, accounting for closed-loop operation yields higher average cost savings as forecast error increases. The resulting designs achieve these savings by progressively shifting investment from battery storage to solar generation and thermal storage, which buffers forecast mismatches.

0.29

Foundation-Style Pretraining for Scalable and Transferable Distributed PV Forecasting

cs.LG ·2026-10-20 ·Dayin Chen, Xiaodan Shi, Xin Xu, Zhongyue Su, Shibo Zhu +4 more
similarity 0.63
Abstract

The rapid growth of distributed photovoltaic (PV) generation is increasing the demand for accurate forecasting across large numbers of geographically dispersed stations. Existing approaches are commonly developed for individual sites or specific forecasting horizons, requiring repeated training and maintenance as new stations are integrated and limiting direct reuse at previously unseen sites. To address this scalability gap, this paper presents a domain-specific foundation-style pretraining framework that learns a shared forecasting model from heterogeneous multi-site and multi-horizon PV data. NWP-assisted forecasting is formulated as a sequence-completion problem that unifies historical PV power, meteorological observations, future numerical weather prediction (NWP) forecasts, and time encodings. Three pretraining objectives are designed and systematically evaluated, including forecast-aligned reconstruction, generic reconstruction, and mixed reconstruction. The mixed objective combines the operational structure of PV forecasting with random sequence reconstruction and provides the most balanced performance across forecasting accuracy, degraded NWP conditions, and downstream adaptation. Experiments on 479 distributed PV stations use 340 stations for model development and 139 spatially held-out stations for zero-shot evaluation. Across horizons from 6 hours to 7 days, the multi-site pretrained MR model outperforms representative station-specific and shared baselines, as well as generalist time-series models, including a recent large-scale pretrained foundation model. The pretrained model can also be directly deployed at new PV stations and subsequently adapted to region-specific operational objectives when local data become available, providing a scalable forecasting paradigm for large distributed PV fleets.

0.18

Assessing Modeling Fidelity for Long-Term Battery Energy Storage Planning: Operation, Degradation, and Temporal Representation

eess.SY ·2026-09-30 ·Hassan Zahid Butt, Xingpeng Li
similarity 0.63
Abstract

Long-term battery energy storage system (BESS) planning often relies on simplified degradation, operational, and temporal representations to maintain computational tractability, yet their effects on lifecycle conclusions are not well understood. This paper assesses the modeling fidelity needed for long-term lifecycle evaluation of BESS designs used in planning studies. A 20-year grid-connected microgrid is sized using a degradation-naive planning model, after which the installed portfolio is fixed and evaluated through sequential lifecycle validation. The reference representation combines nonlinear calendar and cycle aging, C-rate-dependent efficiencies, state-of-health-dependent performance, self-discharge, battery replacement, and full 8,760-h chronology. Battery-model hierarchies, targeted ablations, linear degradation surrogates, health-update intervals, temporal reductions, and combined simplifications are compared using lifecycle cost, replacement timing, state of health, and energy adequacy. The reference case produces replacements in years 9 and 18, a $111.25 million lifecycle net present cost, and 24.01 MWh of cumulative energy not served. Omitting calendar aging eliminates both replacements and understates lifecycle cost by 35.1%, whereas a separately calibrated linear surrogate model reproduces both replacement years and limits the cost deviation to 0.2%, although energy not served remains 31.8% below the reference. A peak-informed calibrated 12-day representation preserves replacement timing but reports zero energy not served, while replacing the preserved peak day with the maximum daily-energy-deficit day substantially overstates energy not served because representative-day closure alters the battery state surrounding the critical event. The results show that modeling fidelity is metric-dependent and should be selected according to the lifecycle outcome to be preserved.

0.10

Frequency-Calibrated Decision-Focused Learning for BESS Dispatch Under Renewable Uncertainty

eess.SY ·2026-10-30 ·Zihan Meng, Chenxi Hu, Xin Cui, Francis Yunhe Hou
hot direction similarity 0.63
Abstract

Battery energy storage system (BESS) flexibility depends on state of charge and intertemporal operating constraints. Renewable forecast errors of similar magnitudes can lead to different BESS dispatch results. An error may alter early charging or discharging decisions and reduce the flexibility available for subsequent regulation, while another may have little effect on the resulting schedule. To account for these unequal consequences, this paper proposes Frequency-Calibrated Decision-Focused Learning (FC-DFL), which trains renewable predictors using the realized operating costs of their induced BESS schedules. Gaussian smoothing and solver-based zeroth-order estimation provide training feedback without requiring differentiating through the non-differentiable mixed-integer BESS dispatch problem. The same decision feedback is further combined with prediction sensitivity to develop a decision-oriented XAI method that identifies the input features and forecast periods most consequential to BESS operation. Case studies using German wind and solar data show that FC-DFL reduces the integrated absolute frequency-deviation metric by 6.05% and decision regret by 23.92% relative to accuracy-based predict-then-optimize method. The XAI analysis further demonstrates that the identified high-impact forecast periods produce 2.84 times larger average absolute changes in realized operating cost than low-impact periods. These findings highlight the importance of incorporating downstream decision-making outcomes into renewable forecasting and demonstrate the value of FC-DFL in improving BESS regulation and providing operationally meaningful forecast explanations.

0.24

Battery Energy Storage Sizing in PV Ramp-Rate Smoothing using Constraint-Aware Reinforcement Learning-Based Controller

eess.SY ·2026-11-13 ·Arash Omidi, Tanmay Mishra, Mads R. Almassalkhi
benchmark similarity 0.63
Abstract

This paper presents a constraint-aware reinforcement learning (CARL) controller for battery energy storage system (BESS) sizing and photovoltaic (PV) ramp-rate smoothing. Rapid PV power fluctuations caused by cloud transitions can introduce operational and stability challenges in power systems. To mitigate these impacts, grid codes impose ramp-rate limits (RRL) on PV power injected to the grid. BESSs can support such grid codes by absorbing or supplying power during rapid variations. However, the extent to which BESSs can reduce PV-induced variability depends on (i) the BESS power and energy capacities; and (ii) the adopted controller. Thus, BESS sizing and controller design are coupled. Conventional moving-average control can increase battery usage due to filter-induced lag, while ramp-rate control is reactive and does not account for the long-term impact of actions on battery state of charge and future ramp events. Optimization-based methods can reduce BESS requirements by anticipating future PV variations, but their performance depends on accurate PV forecasts. To address these limitations, the CARL controller learns a causal state-feedback policy from historical PV data without requiring forecasts during deployment. Ramp-rate, converter-power, and state-of-charge constraints are incorporated into a causal feasibility interval that guarantees feasible actions by definition. A full-horizon input-convex neural network (ICNN)-based optimization is developed as a noncausal benchmark for the minimum achievable BESS requirements. Evaluation using three real-world PV datasets shows that, at a 10\%/min ramp-rate limit, CARL reduces peak BESS power by 8.7--10.4\% and energy capacity by 47.5--62.6\% relative to conventional ramp-rate control while maintaining the grid-codes compliance.

0.20

Explainable AI for Solar PV Power Forecasting: From Model Selection to Trustworthy, Reproducible Deployment

cs.AI ·2026-11-19 ·Nuzhat Khan, Muhammad Paend Bakht, Ab Al-Hadi Ab Rahman, Fabiano Pallonetto, Amy Fahy +5 more
similarity 0.62
Abstract · 24 pages, 8 figures, 6 tables. Code and results available from the corresponding author on request

Machine learning (ML) is now a standard tool for forecasting the output of solar photovoltaic (PV) plants, yet published accuracy figures are often hard to compare and harder to trust. Many studies validate with random splits, report no reference forecast, and present feature attributions without saying what they can and cannot show. This paper reviews the main families of ML methods for PV power forecasting and resource assessment, from tree ensembles to deep and foundation models, and sets out a reproducible workflow that combines automated model search with explainable AI. The workflow is then tested on an openly available dataset: a 16.32 kWp plant in Porto, Portugal, forecast one day ahead from a 4 km numerical weather prediction grid. Over a full test year, the best models reach a normalised root mean square error (nRMSE) of 11.6% of installed capacity, about half the error of smart persistence. The choice of input features changed accuracy far more than the choice among strong algorithms, and shuffled cross-validation was mildly optimistic. After conformal calibration, the nominal 80% prediction intervals covered 81.7% of observations, against 64.5% before. SHAP rankings stayed stable when the model was retrained on different periods but shifted when correlated inputs were removed, so attributions should be read as properties of a model rather than of the plant. The paper closes with practical lessons and open problems, including deployment on edge hardware and the effect of a changing climate.

0.24