CS Paper Radar

A Physically Consistent Assessment of Nearfield Beamfocusing into Occluded Regions

Georg Schwan, Alexander Stutz-Tirri, Christoph Studer

eess.SP ·submitted 2026-08-13 15:17 UTC · v1
positioncode/data

Abstract

Recent work has explored elaborate beamfocusing techniques for the radiative nearfield, with some studies suggesting that certain beamshapes, such as Airy beams, can enable efficient electromagnetic (EM) wave transmission behind obstacles. In this letter, we ask whether the added complexity of such techniques is justified. We distinguish between partially and fully occluded regions. In the partially occluded region, where Airy beams are commonly employed, we show that a simple line-of-sight (LoS) strategy, which activates only antennas having an unobstructed view of the receiver, is near-optimal and outperforms Airy beams at substantially lower complexity. In the fully occluded region, we argue that accurate beamfocusing requires a physically consistent EM wave propagation model that captures propagation effects such as diffraction. Once such a model is available, however, the optimal beamfocusing strategy has a closed-form solution and can be computed directly. These results suggest that elaborate techniques, such as Airy beams, offer little benefit over simpler alternatives for beamfocusing into occluded regions.

Comment
Submitted to a journal

Closest papers

Nearest neighbours by meaning across the whole index.

Beamfocusing Versus Airy Beams: Does Antenna Blockage Require Beam Bending?

eess.SP cs.IT ·2026-10-20 ·Emil Björnson, Vitaly Petrov, Erik G. Larsson
theory similarity 0.75
Abstract · 5 pages, 2 figures, submitted for review

Airy beams are often proposed in array beamforming to bend beams around obstacles. We prove that, for a single-antenna receiver, conventional beamfocusing maximizes the received power regardless of how many antennas are blocked and, in expectation, even with phase errors in the channel state information. This also holds for multi-antenna receivers under a phase-separability condition that is satisfied in rank-one channels. Numerical results confirm that unmodified beamfocusing is optimal for physically small receivers (i.e., those that fit within the beamwidth) when an obstacle is present. For physically larger receivers, the optimal precoding deviates from beamfocusing to better illuminate the receiver's unobstructed parts, but will not become Airy beams. While Airy beams can be configured to perform well, their ability to follow a bent trajectory in front of an obstacle does not maximize the received power behind it.

0.13

Limitation of Bessel Beams in Near Field Communications: A Depth of Field Perspective

eess.SP ·2026-10-30 ·Aditya Jolly, Vitaly Petrov, Gábor Fodor, Emil Björnson
similarity 0.70
Abstract · Submitted to IEEE TCOM on 20th October 2026. Copyright 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be o…

Bessel beams have recently been explored as a candidate complement to focused beams in radiative near-field communications due to their non-diffracting and self-healing properties. However, recent work has shown that the practically useful range of finite-aperture Bessel beams can occupy only a fraction of the radiative near-field region, establishing the existence of a finite propagation limit. In this paper, we establish such a limitation analytically from a depth-of-field perspective for Bessel beams generated by finite circular and square apertures. To quantify the Bessel beam depth, we first derive analytical expressions for the normalized array gain and use them to establish absolute and peak-normalized $3$-dB depth-of-field criteria. These criteria reveal critical cone-angle thresholds that partition the Bessel-beam configuration space into (i) undefined, (ii) finite, and (iii) infinite depth-of-field regimes. Our analysis further reveals that the maximum usable non-diffracting range under the proposed depth-of-field criterion is limited to $\approx22\%$ and $\approx19\%$ of the Fraunhofer distance for circular and square apertures, respectively. Numerical results confirm the accuracy of the derived limits for discrete planar arrays, providing practical engineering guidelines for the design of finite-aperture Bessel beams in future near-field communications.

0.28

Beyond Fresnel Approximation: Exact Airy Beamforming for Near-Field THz Communications

eess.SP ·2026-10-28 ·Fangjie Shen, Weidong Mei, Aoran Liu, Peilan Wang, Zhi Chen
similarity 0.69
Abstract

Line-of-sight (LoS) blockage can severely degrade the performance of conventional focused beams in terahertz (THz) communications. Recently, bending beams (e.g., Airy beams) have attracted increasing attention due to their ability to bypass obstacles by propagating along curved trajectories under near-field propagation conditions. However, existing Airy-beam designs in wireless communications often rely on the Fresnel approximation for the focal distance, which becomes inaccurate at large steering angles or short propagation distances. To address this limitation, this letter proposes a more accurate Airy beamforming design method based on the exact focal-distance expression and the corresponding caustic geometry. Specifically, we jointly optimize the bending curvature, virtual focal distance, and steering angle to maximize the received signal power subject to receiver-alignment and obstacle-avoidance constraints. To tackle the resulting non-convex problem, we first use geometric preprocessing to narrow the feasible range of the bending curvature. Then, a two-layer optimization framework is developed with the outer and inner layers optimizing the bending curvature and the other two parameters, respectively. Numerical results based on the cascaded geometrical and wave channel model demonstrate that the proposed method achieves higher received signal power than conventional Airy-beam designs and offers complementary advantages over conventional focused beams under different blockage ratios.

0.29

Hierarchical Beam Training and Codebook Design for Movable Antenna-Assisted Near-Field Systems

cs.IT ·2026-09-03 ·Meihui Liu, Qian Zhang, Xuejun Cheng, Yuhui Jiao, Yunxiao Li +1 more
published similarity 0.68
Abstract

As sixth-generation (6G) communication systems evolve toward higher frequency bands and larger array apertures, the near-field range expands rapidly, making near-field channel estimation increasingly important and challenging. Beam training has been recognized as an effective approach for channel state information (CSI) acquisition. However, because of the propagation characteristics of spherical waves, beam training needs to perform a joint search in the angle and distance domains, which results in unaffordable beam training overhead. By flexibly reconfiguring antenna positions, movable antenna (MA) technology can fully exploit the spatial variations of wireless channels and achieve more accurate beam focusing, thereby providing additional flexibility for efficient beam training design. Therefore, based on MA-assisted near-field systems, we develop a hierarchical beam training strategy that combines reduced training overhead with high beam gain and design a corresponding hierarchical codebook. This codebook forms focused beams over the joint angle-distance domain, maximizing beam gain within the target region while suppressing energy leakage into non-target regions. Simulation results confirm substantial performance gains of the method over the conventional fixed-position antenna (FPA) system and the far-field beam training method.

0.48

Robust Near-Field Beam Focusing Under Imperfect Localization

eess.SP ·2026-08-19 ·Nima Mozaffarikhosravi, Amirhossein Azarbahram, Prathapasinghe Dharmawansa, Italo Atzeni
similarity 0.68
Abstract · To be presented at the International Workshop on Smart Antennas (WSA) 2026

The transition to 6G-and-beyond wireless systems with large-scale antenna arrays and high-frequency deployments significantly extends the near-field region, where channels exhibit a strong dependence on user location. While this enables location-based beam focusing as a low-overhead alternative to conventional channel estimation, its performance is highly sensitive to localization errors. In this paper, we study robust near-field beam focusing under imperfect user localization. We explicitly characterize the impact of localization errors on the line-of-sight-dominated channel by deriving a tractable uncertainty model via a first-order Taylor approximation, which captures the coupled effects of distance and angle in near-field propagation. Building on this model, we formulate a max-min signal-to-interference-plus-noise ratio optimization problem that guarantees performance under worst-case channel realizations induced by bounded localization errors. The resulting problem is reformulated into a feasibility problem using semidefinite relaxation. Numerical results demonstrate that the proposed robust design significantly improves the worst-user rate compared to non-robust beam focusing, particularly under high total transmit power levels and large localization error ranges.

0.33

Why Is Cubic-Phase Airy Beamforming Sufficient for Blockage Recovery?

eess.SP ·2026-09-01 ·Yi Wang, Linglong Dai
theory similarity 0.67
Abstract

Blockage is a critical challenge for near-field communications, where reliable transmission depends heavily on the line-of-sight (LoS) path and can suffer severe power degradation when that path is obstructed. Near-field Airy beams offer a promising solution for blockage mitigation by forming curved trajectories that guide energy around obstacles, and can be practically generated with phased arrays by imposing a cubic source phase. However, trajectory-based interpretations explain how Airy beams propagate, but not why cubic-phase Airy beamforming is sufficient for blockage recovery or how much received-power gain the cubic term itself contributes. To answer these questions, we identify the blockage-induced phase mismatch relative to conventional near-field focusing and quantify how successive phase orders compensate it. The resulting analysis reveals that the linear and quadratic degrees of freedom, originally used to compensate the free-space geometric phase, can be reoptimized under blockage to provide resteering and refocusing, respectively. The quadratic term can compensate the dominant quadratic component of the additional mismatch, while the Airy cubic provides the first independent correction to the remaining non-quadratic mismatch. Simulations show that linear and quadratic compensation recover most of the available gain. The Airy cubic adds only $0.1433$ dB on average, yet enables the cubic-phase family to attain $99.77\%$ of the phase-only upper bound. Residual-phase analysis further determines when the remaining higher-order components are negligible within a prescribed received-power tolerance. These results explain why cubic-phase Airy beamforming is sufficient: lower-order phase terms provide most of the recovery, while the cubic term closes nearly all of the remaining gap.

0.33

Wavefront Engineering for Physical Layer Security in Near-Field Wireless Communications

eess.SP ·2026-10-15 ·Sotiris Droulias, Angeliki Alexiou
similarity 0.66
Abstract · 12 pages, 9 figures

With wireless transmission exposing information to potential interception by unintended receivers, physical layer security (PLS) offers a promising approach to securing wireless communications. Beamforming can mitigate this vulnerability by exploiting the spatial characteristics of wireless propagation to concentrate power toward the intended receiver while suppressing it at potential eavesdroppers. However, as wireless systems enter the radiating near field of large-aperture antenna arrays, the resulting wavefront curvature provides additional opportunities for spatial wavefront engineering to enhance PLS. In this work, we investigate the use of different beam types for PLS, including focused, curved, abruptly autofocusing, and cosine beams, generated using uniform linear and planar arrays (ULAs/UPAs). To quantify their performance, we introduce power-based metrics that characterize the power received by the legitimate user and a potential eavesdropper. For all beam types we introduce focusing along the vertical UPA direction, to independently control the phase distributions along the two UPA dimensions and enhance the power discrimination between the legitimate receiver and the eavesdropper. We also propose hollow-focused beams, in which an inactive strip is introduced in the transmitting aperture to create a protected low-power region between the transmitter and the legitimate receiver. The results demonstrate that vertical focusing dramatically enhances the PLS performance and that hollow-focused beams achieve superior PLS performance in both line-of-sight (LoS) and vicinity-of-user (VoU) scenarios.

0.27

Analytical Characterization of Radial Resolution at Oblique Angles for Near-Field Communications

eess.SP ·2026-11-11 ·Viviana Centritto, Sotiris Droulias, Angeliki Alexiou
theory similarity 0.64
Abstract · 6 pages, 8 figures

Exploiting radial resolvability in near-field communications requires analytical expressions that directly map physical beam parameters to resolution-controllable focal regions. However, beam characterization at oblique angles produces complex algebraic expressions that mask these critical interactions. In this work, we introduce an electromagnetic-aware analytical model built upon a tight upper bound of the spatial power density. This approach yields compact, closed-form solutions for the peak intensity position and radial focal extent, enabling the design of contiguous multi-user focal regions with controlled radial resolution. Performance evaluations confirm that the framework closely tracks exact solutions while facilitating system dimensioning and inter-beam interference management across varying steering angles.

0.17