CS Paper Radar

Beyond Fresnel Approximation: Exact Airy Beamforming for Near-Field THz Communications

Fangjie Shen, Weidong Mei, Aoran Liu, Peilan Wang, Zhi Chen

eess.SP ·submitted 2026-10-28 07:38 UTC · v1

Abstract

Line-of-sight (LoS) blockage can severely degrade the performance of conventional focused beams in terahertz (THz) communications. Recently, bending beams (e.g., Airy beams) have attracted increasing attention due to their ability to bypass obstacles by propagating along curved trajectories under near-field propagation conditions. However, existing Airy-beam designs in wireless communications often rely on the Fresnel approximation for the focal distance, which becomes inaccurate at large steering angles or short propagation distances. To address this limitation, this letter proposes a more accurate Airy beamforming design method based on the exact focal-distance expression and the corresponding caustic geometry. Specifically, we jointly optimize the bending curvature, virtual focal distance, and steering angle to maximize the received signal power subject to receiver-alignment and obstacle-avoidance constraints. To tackle the resulting non-convex problem, we first use geometric preprocessing to narrow the feasible range of the bending curvature. Then, a two-layer optimization framework is developed with the outer and inner layers optimizing the bending curvature and the other two parameters, respectively. Numerical results based on the cascaded geometrical and wave channel model demonstrate that the proposed method achieves higher received signal power than conventional Airy-beam designs and offers complementary advantages over conventional focused beams under different blockage ratios.

Closest papers

Nearest neighbours by meaning across the whole index.

Geometry-based Efficient Airy Beam Training for Quasi-LoS in Terahertz Near-field Communications

eess.SP ·2026-11-11 ·Wenqi Zhao, Chong Han
similarity 0.70
Abstract

With enlarged antenna apertures in Terahertz (THz) communications, near-field propagation becomes increasingly dominant, highlighting quasi-line-of-sight (quasi-LoS) scenarios with partial blockage. Airy beams offer a promising solution through their curved trajectories, but existing training methods for unknown blockage rely on computationally intensive parameter searches or learning-based approaches. In this paper, we propose an efficient geometry-based Airy beam training framework for uniform linear array (ULA) and uniform planar array (UPA) systems. First, theoretical feasibility bounds under finite apertures are derived to eliminate infeasible codewords. A performance-oriented Slope-Depth Geometric Codebook (SDGC) is then developed using bending-direction probing and geometric sampling. To further reduce training overhead, a latency-oriented Bijective 1D Geometric Codebook (B1GC) is proposed by mapping blockage-avoidance waypoints to receiver targets, enabling one-dimensional search. For UPA systems, a hybrid focusing--Airy mode is introduced, using four probe beams to identify the blockage-avoidance dimension and bending direction, followed by Airy beam training and orthogonal near-field focusing. Simulations show that SDGC achieves 14.8 bit/s/Hz average spectral efficiency with 40.9\% lower training overhead than the hierarchical focusing--Airy codebook (HFAC), while B1GC reduces overhead by 87.1\% with comparable performance. The UPA results further demonstrate effectiveness under two-dimensional blockage.

0.24

A Physically Consistent Assessment of Nearfield Beamfocusing into Occluded Regions

eess.SP ·2026-08-13 ·Georg Schwan, Alexander Stutz-Tirri, Christoph Studer
positioncode/data similarity 0.69
Abstract · Submitted to a journal

Recent work has explored elaborate beamfocusing techniques for the radiative nearfield, with some studies suggesting that certain beamshapes, such as Airy beams, can enable efficient electromagnetic (EM) wave transmission behind obstacles. In this letter, we ask whether the added complexity of such techniques is justified. We distinguish between partially and fully occluded regions. In the partially occluded region, where Airy beams are commonly employed, we show that a simple line-of-sight (LoS) strategy, which activates only antennas having an unobstructed view of the receiver, is near-optimal and outperforms Airy beams at substantially lower complexity. In the fully occluded region, we argue that accurate beamfocusing requires a physically consistent EM wave propagation model that captures propagation effects such as diffraction. Once such a model is available, however, the optimal beamfocusing strategy has a closed-form solution and can be computed directly. These results suggest that elaborate techniques, such as Airy beams, offer little benefit over simpler alternatives for beamfocusing into occluded regions.

0.51

A Sub-Aperture-Based Ray-Tracing Framework for Near-Field U-MIMO THz Communications

eess.SP ·2026-10-28 ·Federico Ruggeri, Sotiris Droulias, Jiming Chen, Angeliki Alexiou, Jie Zhang
similarity 0.66
Abstract · 5 pages, 5 figures, submitted to EUCaP27

Terahertz (THz) communications are characterized by antennas with large apertures and extended near-field (NF) region, offering the opportunity to develop adaptable beam manipulation strategies, particularly related to ultra-massive MIMO (U-MIMO). While Ray-Tracing (RT) offers an attractive alternative to full-wave methods, conventional ray-based approaches are generally formulated under far-field (FF) assumptions. We propose a technique that extends RT to the NF regime, enabling ray-based NF characterization of transmitting arrays. We model the transmitting array as an antenna aperture and develop a RT framework that partitions the transmitting aperture into sub-apertures emitting FF contributions which can be propagated via geometric optics (GO). We develop a Ray-Launching algorithm based on the proposed framework and assess its beam-reconstruction accuracy against full-wave propagation. The results demonstrate that, through tunable aperture partitioning, the proposed approach can reproduce beam manipulation effects characteristic of NF U-MIMO THz communications using GO ray propagation.

0.35

Beamfocusing Versus Airy Beams: Does Antenna Blockage Require Beam Bending?

eess.SP cs.IT ·2026-10-20 ·Emil Björnson, Vitaly Petrov, Erik G. Larsson
theory similarity 0.66
Abstract · 5 pages, 2 figures, submitted for review

Airy beams are often proposed in array beamforming to bend beams around obstacles. We prove that, for a single-antenna receiver, conventional beamfocusing maximizes the received power regardless of how many antennas are blocked and, in expectation, even with phase errors in the channel state information. This also holds for multi-antenna receivers under a phase-separability condition that is satisfied in rank-one channels. Numerical results confirm that unmodified beamfocusing is optimal for physically small receivers (i.e., those that fit within the beamwidth) when an obstacle is present. For physically larger receivers, the optimal precoding deviates from beamfocusing to better illuminate the receiver's unobstructed parts, but will not become Airy beams. While Airy beams can be configured to perform well, their ability to follow a bent trajectory in front of an obstacle does not maximize the received power behind it.

0.13

Single-sided lens terahertz flat-top beam shaping in the Fresnel region

eess.SY physics.optics ·2026-11-04 ·Ehsan Imanbeygi, Mohammad Hossein Koohi Ghamsari, Mehdi Ahmadi-Boroujeni, Babak Honarbakhsh
published similarity 0.66
Abstract

In this paper, a novel, to our knowledge, analytical approach is introduced for the design of a single-sided plano-convex lens (PCL) capable of terahertz (THz) flat-top beam shaping in the Fresnel region. The lens profile, derived from geometrical optics principles, integrates collimating and beam-shaping functions into a single optical surface, thereby simplifying fabrication. The efficiency of the method is demonstrated by designing two PCLs that convert a divergent Gaussian beam from a monochromatic THz source (at 100 and 200 GHz) into flat-top beams with target radii of 400 and 500 mm at distances of 3 and 4 m, respectively. The resulting fields, evaluated through analytical, integral equation, and finite element techniques, are shown to be comparable to those produced by a conventional double-sided concave-convex lens. Furthermore, the sensitivity of the design to frequency and alignment variations is investigated, confirming the robustness of this single-curvature approach for integration into practical THz imaging systems.

0.67

Empirical Analysis of Near-Field Beam Shaping for Blockage Events

eess.SP ·2026-09-23 ·Jy-Chin Liao, Volodymyr Vizitiv, Edward W. Knightly
similarity 0.64
Abstract · 12 pages, 10 figures, 1 table. Submitted to IEEE Transactions on Wireless Communications

Millimeter-wave (mmWave) to sub-terahertz (sub-THz) links can realize high data rates, yet are highly vulnerable to dynamic blockages due to high directivity, limited multipath, and dependence on line-of-sight (LoS) propagation. While structured and self-healing beams are promising solutions, it remains unclear how beam types perform under dynamic blockage. In this paper, we present an empirical analysis of structured near-field beams using two transmission policies. At one extreme, we study beam resilience without obstacle adaptation. At the other extreme, we empirically optimize beam parameters to study the limits of multiple beam types under idealized adaptation. We employ numerical analysis based on the angular spectrum method (ASM) and experimental validation using a sub-THz time-domain spectroscopy (TDS) platform to characterize beam performance over complete blockage events. For the scenarios considered, despite lacking self-healing, focused beams provide the strongest resilience when beam parameters are not adapted during a blockage event (i.e., when all beams are optimized only a priori). In contrast, when optimally adapted to obstacle position, curved beams provide the best performance. Lastly, although Bessel beams benefit from self-healing, this property alone can be insufficient to outperform optimized curved and focused beams. These findings provide guidance for blockage-aware beam selection and adaptation protocols.

0.27

Near-Field Beamforming Design for Multi-IRS Wireless Beam Routing

eess.SP ·2026-10-07 ·Tao Wang, Changsheng You, Changchuan Yin
published similarity 0.63
Abstract · 5 pages, 3 figures, accepted by IEEE Communications Letters

This letter investigates efficient near-field beamforming designs for wireless communication systems aided by multiple extremely large-scale intelligent reflecting surfaces (Multi-XL-IRSs). Previous studies have mostly assumed far-field channel conditions, based on which angle-based beamforming is adopted for the base station (BS) and IRSs. However, this approach may lead to degraded performance in practical near-field scenarios. To address this issue, we consider near-field channel modeling and formulate an optimization problem aimed at maximizing the received power at the user equipment (UE) by jointly optimizing the beamforming at the BS and IRSs. Given the intractability under the beam training (BT)-based communication framework, the problem is revisited and reformulated. Subsequently, an efficient algorithm based on alternating optimization (AO) is proposed to solve the reformulated problem. Numerical results demonstrate that, in typical setups, our AO-based beamforming designs provide over 170% and 20% received power gains over conventional angle-based beamforming and beam focusing, respectively. Furthermore, the power scaling law derived under far-field conditions no longer holds in near-field scenarios.

0.56

Why Is Cubic-Phase Airy Beamforming Sufficient for Blockage Recovery?

eess.SP ·2026-09-01 ·Yi Wang, Linglong Dai
theory similarity 0.62
Abstract

Blockage is a critical challenge for near-field communications, where reliable transmission depends heavily on the line-of-sight (LoS) path and can suffer severe power degradation when that path is obstructed. Near-field Airy beams offer a promising solution for blockage mitigation by forming curved trajectories that guide energy around obstacles, and can be practically generated with phased arrays by imposing a cubic source phase. However, trajectory-based interpretations explain how Airy beams propagate, but not why cubic-phase Airy beamforming is sufficient for blockage recovery or how much received-power gain the cubic term itself contributes. To answer these questions, we identify the blockage-induced phase mismatch relative to conventional near-field focusing and quantify how successive phase orders compensate it. The resulting analysis reveals that the linear and quadratic degrees of freedom, originally used to compensate the free-space geometric phase, can be reoptimized under blockage to provide resteering and refocusing, respectively. The quadratic term can compensate the dominant quadratic component of the additional mismatch, while the Airy cubic provides the first independent correction to the remaining non-quadratic mismatch. Simulations show that linear and quadratic compensation recover most of the available gain. The Airy cubic adds only $0.1433$ dB on average, yet enables the cubic-phase family to attain $99.77\%$ of the phase-only upper bound. Residual-phase analysis further determines when the remaining higher-order components are negligible within a prescribed received-power tolerance. These results explain why cubic-phase Airy beamforming is sufficient: lower-order phase terms provide most of the recovery, while the cubic term closes nearly all of the remaining gap.

0.13