CS Paper Radar

A Sub-Aperture-Based Ray-Tracing Framework for Near-Field U-MIMO THz Communications

Federico Ruggeri, Sotiris Droulias, Jiming Chen, Angeliki Alexiou, Jie Zhang

eess.SP ·submitted 2026-10-28 19:47 UTC · v1

Abstract

Terahertz (THz) communications are characterized by antennas with large apertures and extended near-field (NF) region, offering the opportunity to develop adaptable beam manipulation strategies, particularly related to ultra-massive MIMO (U-MIMO). While Ray-Tracing (RT) offers an attractive alternative to full-wave methods, conventional ray-based approaches are generally formulated under far-field (FF) assumptions. We propose a technique that extends RT to the NF regime, enabling ray-based NF characterization of transmitting arrays. We model the transmitting array as an antenna aperture and develop a RT framework that partitions the transmitting aperture into sub-apertures emitting FF contributions which can be propagated via geometric optics (GO). We develop a Ray-Launching algorithm based on the proposed framework and assess its beam-reconstruction accuracy against full-wave propagation. The results demonstrate that, through tunable aperture partitioning, the proposed approach can reproduce beam manipulation effects characteristic of NF U-MIMO THz communications using GO ray propagation.

Comment
5 pages, 5 figures, submitted to EUCaP27

Closest papers

Nearest neighbours by meaning across the whole index.

Geometry-based Efficient Airy Beam Training for Quasi-LoS in Terahertz Near-field Communications

eess.SP ·2026-11-11 ·Wenqi Zhao, Chong Han
similarity 0.68
Abstract

With enlarged antenna apertures in Terahertz (THz) communications, near-field propagation becomes increasingly dominant, highlighting quasi-line-of-sight (quasi-LoS) scenarios with partial blockage. Airy beams offer a promising solution through their curved trajectories, but existing training methods for unknown blockage rely on computationally intensive parameter searches or learning-based approaches. In this paper, we propose an efficient geometry-based Airy beam training framework for uniform linear array (ULA) and uniform planar array (UPA) systems. First, theoretical feasibility bounds under finite apertures are derived to eliminate infeasible codewords. A performance-oriented Slope-Depth Geometric Codebook (SDGC) is then developed using bending-direction probing and geometric sampling. To further reduce training overhead, a latency-oriented Bijective 1D Geometric Codebook (B1GC) is proposed by mapping blockage-avoidance waypoints to receiver targets, enabling one-dimensional search. For UPA systems, a hybrid focusing--Airy mode is introduced, using four probe beams to identify the blockage-avoidance dimension and bending direction, followed by Airy beam training and orthogonal near-field focusing. Simulations show that SDGC achieves 14.8 bit/s/Hz average spectral efficiency with 40.9\% lower training overhead than the hierarchical focusing--Airy codebook (HFAC), while B1GC reduces overhead by 87.1\% with comparable performance. The UPA results further demonstrate effectiveness under two-dimensional blockage.

0.31

Beyond Fresnel Approximation: Exact Airy Beamforming for Near-Field THz Communications

eess.SP ·2026-10-28 ·Fangjie Shen, Weidong Mei, Aoran Liu, Peilan Wang, Zhi Chen
similarity 0.66
Abstract

Line-of-sight (LoS) blockage can severely degrade the performance of conventional focused beams in terahertz (THz) communications. Recently, bending beams (e.g., Airy beams) have attracted increasing attention due to their ability to bypass obstacles by propagating along curved trajectories under near-field propagation conditions. However, existing Airy-beam designs in wireless communications often rely on the Fresnel approximation for the focal distance, which becomes inaccurate at large steering angles or short propagation distances. To address this limitation, this letter proposes a more accurate Airy beamforming design method based on the exact focal-distance expression and the corresponding caustic geometry. Specifically, we jointly optimize the bending curvature, virtual focal distance, and steering angle to maximize the received signal power subject to receiver-alignment and obstacle-avoidance constraints. To tackle the resulting non-convex problem, we first use geometric preprocessing to narrow the feasible range of the bending curvature. Then, a two-layer optimization framework is developed with the outer and inner layers optimizing the bending curvature and the other two parameters, respectively. Numerical results based on the cascaded geometrical and wave channel model demonstrate that the proposed method achieves higher received signal power than conventional Airy-beam designs and offers complementary advantages over conventional focused beams under different blockage ratios.

0.29

Empirical Analysis of Near-Field Beam Shaping for Blockage Events

eess.SP ·2026-09-23 ·Jy-Chin Liao, Volodymyr Vizitiv, Edward W. Knightly
similarity 0.66
Abstract · 12 pages, 10 figures, 1 table. Submitted to IEEE Transactions on Wireless Communications

Millimeter-wave (mmWave) to sub-terahertz (sub-THz) links can realize high data rates, yet are highly vulnerable to dynamic blockages due to high directivity, limited multipath, and dependence on line-of-sight (LoS) propagation. While structured and self-healing beams are promising solutions, it remains unclear how beam types perform under dynamic blockage. In this paper, we present an empirical analysis of structured near-field beams using two transmission policies. At one extreme, we study beam resilience without obstacle adaptation. At the other extreme, we empirically optimize beam parameters to study the limits of multiple beam types under idealized adaptation. We employ numerical analysis based on the angular spectrum method (ASM) and experimental validation using a sub-THz time-domain spectroscopy (TDS) platform to characterize beam performance over complete blockage events. For the scenarios considered, despite lacking self-healing, focused beams provide the strongest resilience when beam parameters are not adapted during a blockage event (i.e., when all beams are optimized only a priori). In contrast, when optimally adapted to obstacle position, curved beams provide the best performance. Lastly, although Bessel beams benefit from self-healing, this property alone can be insufficient to outperform optimized curved and focused beams. These findings provide guidance for blockage-aware beam selection and adaptation protocols.

0.27

RF Chain Count to Mitigate Beam Split in Wideband Hybrid Arrays: From Far-Field to Near-Field

eess.SP ·2026-10-05 ·Ahmed Hussain, Asmaa Abdallah, Abdulkadir Celik, Ahmed M. Eltawil
similarity 0.65
Abstract

Deploying large antenna arrays transitions wireless communication into the radiative near-field (NF), where spherical wavefronts enable beamfocusing in the joint angle-distance domain. However, wideband beamforming with large antenna arrays suffers from beam split across both spatial dimensions. Although fully digital arrays can eliminate this impairment, their prohibitive hardware cost and power consumption motivate the adoption of hybrid array architectures equipped with a limited number of radio-frequency (RF) chains. This paper investigates the minimum number of RF chains required to mitigate the beam split. We derive closed-form expressions for the required number of RF chains in fully-connected (FC) architectures and propose an algorithm for sub-connected (SC) architectures, considering both uniform linear arrays (ULAs) and uniform circular arrays (UCAs). Our analysis reveals that beyond a focal distance of 10L, where L denotes the aperture length, the NF RF chain count converges to its far-field counterpart and becomes a function of the angle alone. Moreover, the FC hybrid architecture mitigates the beam split by using fewer RF chains than the SC architecture, albeit at the cost of increased complexity in the phase shifter network.

0.14

A Physically Consistent Assessment of Nearfield Beamfocusing into Occluded Regions

eess.SP ·2026-08-13 ·Georg Schwan, Alexander Stutz-Tirri, Christoph Studer
positioncode/data similarity 0.64
Abstract · Submitted to a journal

Recent work has explored elaborate beamfocusing techniques for the radiative nearfield, with some studies suggesting that certain beamshapes, such as Airy beams, can enable efficient electromagnetic (EM) wave transmission behind obstacles. In this letter, we ask whether the added complexity of such techniques is justified. We distinguish between partially and fully occluded regions. In the partially occluded region, where Airy beams are commonly employed, we show that a simple line-of-sight (LoS) strategy, which activates only antennas having an unobstructed view of the receiver, is near-optimal and outperforms Airy beams at substantially lower complexity. In the fully occluded region, we argue that accurate beamfocusing requires a physically consistent EM wave propagation model that captures propagation effects such as diffraction. Once such a model is available, however, the optimal beamfocusing strategy has a closed-form solution and can be computed directly. These results suggest that elaborate techniques, such as Airy beams, offer little benefit over simpler alternatives for beamfocusing into occluded regions.

0.51

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

cs.IT ·2026-10-25 ·Jingyuan Xu, Yuanhui Wu, Zhentian Zhang, Zaichen Zhang, Tuo Wu +4 more
similarity 0.62
Abstract · 12 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

0.30

Limitation of Bessel Beams in Near Field Communications: A Depth of Field Perspective

eess.SP ·2026-10-30 ·Aditya Jolly, Vitaly Petrov, Gábor Fodor, Emil Björnson
similarity 0.62
Abstract · Submitted to IEEE TCOM on 20th October 2026. Copyright 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be o…

Bessel beams have recently been explored as a candidate complement to focused beams in radiative near-field communications due to their non-diffracting and self-healing properties. However, recent work has shown that the practically useful range of finite-aperture Bessel beams can occupy only a fraction of the radiative near-field region, establishing the existence of a finite propagation limit. In this paper, we establish such a limitation analytically from a depth-of-field perspective for Bessel beams generated by finite circular and square apertures. To quantify the Bessel beam depth, we first derive analytical expressions for the normalized array gain and use them to establish absolute and peak-normalized $3$-dB depth-of-field criteria. These criteria reveal critical cone-angle thresholds that partition the Bessel-beam configuration space into (i) undefined, (ii) finite, and (iii) infinite depth-of-field regimes. Our analysis further reveals that the maximum usable non-diffracting range under the proposed depth-of-field criterion is limited to $\approx22\%$ and $\approx19\%$ of the Fraunhofer distance for circular and square apertures, respectively. Numerical results confirm the accuracy of the derived limits for discrete planar arrays, providing practical engineering guidelines for the design of finite-aperture Bessel beams in future near-field communications.

0.28

Near-Field Dual-UPA Communications: A Generalized Geometric Approach

eess.SP ·2026-08-26 ·Li Zheng, Xing Hao, Ziru Chen, Yong Liu, Li Chen +1 more
published similarity 0.61
Abstract · This paper is accepted by IEEE globecom 2026

This paper investigates a near-field (NF) multiple-input multiple-output (MIMO) communication system equipped with dual uniform planar arrays (UPAs). We first develop a generalized geometric model to calculate the 3D distance between arbitrary antenna elements across the transmitter and receiver panels. Leveraging the distance analysis, we derive a closed-form near-field to far-field (NF-FF) boundary for dual-UPA configurations. By exploiting the geometric structure of the UPAs, we further decompose the near-field channel matrix into a Kronecker-product of two lower-dimensional matrices. This decomposition enables a low-complexity NF beamforming design for achievable-rate maximization. Numerical results validate the analysis and demonstrate that the conventional Rayleigh distance is a special case of the generalized model. Furthermore, the proposed beamforming design achieves near-optimal rate performance while significantly reducing the computational complexity compared to state-of-the-art NF beamforming methods.

0.21