CS Paper Radar

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

Jingyuan Xu, Yuanhui Wu, Zhentian Zhang, Zaichen Zhang, Tuo Wu, Hao Jiang, Jian Dang, Christos Masouros, Kin-Fai Tong

cs.IT ·submitted 2026-10-25 08:59 UTC · v1

Abstract

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

Comment
12 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Closest papers

Nearest neighbours by meaning across the whole index.

Off-Grid Position Optimization under Mutual Coupling in Fluid Antenna Arrays

cs.IT ·2026-08-16 ·Jingyuan Xu, Jian Dang, Zaichen Zhang
similarity 0.67
Abstract

Fluid antenna arrays exploit continuous antenna repositioning within a finite aperture to provide geometry diversity beyond grid-constrained port selection. Every displacement, however, changes both the radiation response and the multiport mutual-impedance network, coupling geometry optimization with the source-voltage constraint. This paper develops an electromagnetic-aware (EM-aware) beamforming framework for planar fluid antenna arrays. Phase retrieval converts an amplitude-only shaped-beam specification into an aperture-compatible complex target, and an EM-aware orthogonal matching pursuit (OMP) method selects grid-constrained initial antenna positions. Continuous refinement then alternates exact voltage-constrained current optimization with movement-constrained projected adaptive moment estimation (Adam) updates of all physical antenna positions. Across independently perturbed symmetric dual-beam targets, the proposed method consistently improves the average mainlobe signal-to-noise ratio (SNR) and reduces the peak sidelobe level (PSLL) over a uniform array and discrete port selection.

0.32

Fluid Antenna Array-Enabled Near-Field ISAC: Joint Port Position Optimization and Transmit Beamforming Design

cs.IT ·2026-11-02 ·Wangqi Shi, Zhentian Zhang, Hao Jiang, Zaichen Zhang, Kin-Fai Tong
similarity 0.67
Abstract

Fluid antenna systems (FASs) have shown that activating a single port from a densely packed antenna array can yield spatial diversity comparable to that of tens of independent antennas, a property that has substantially improved communication reliability and efficiency. The fluid antenna array (FAA) extends this concept to multi-port configurations while avoiding complex multi-dimensional spatial correlation, and offers significant geometrical flexibility under a finite aperture and a limited port budget. These attributes motivate environment-adaptive array geometry for sensing in integrated sensing and communication (ISAC) systems. Although this flexibility enables adaptive array geometries that exploit near-field distance-angle information, improving multi-parameter target estimation under communication and deployment constraints remains challenging. In this paper, we propose a planar FAA-assisted near-field ISAC framework for multiuser communication and target sensing. Specifically, we derive the Fisher information matrix (FIM) and the corresponding Cramér-Rao bound (CRB) for the joint estimation of target range, zenith angle, azimuth angle, and radial velocity. Based on the derived CRB, we jointly optimize the FAA port positions and transmit beamforming to improve sensing accuracy while satisfying communication signal-to-interference-plus-noise ratio (SINR), transmit power, and physical deployment constraints. To solve the resulting non-convex problem, we develop a two-stage alternating optimization algorithm, in which transmit beamforming is optimized through semidefinite relaxation (SDR), while FAA port positions are successively optimized through discrete search and continuous refinement. Simulation results indicate that the proposed algorithm achieves favorable sensing performance while maintaining a reasonable computational cost.

0.16

Characterization of Beam-Squint and Beam-Split Effects in RIS-assisted Multi-Frequency Networks

eess.SP ·2026-09-07 ·Mohammad Amin Saeidi, Hina Tabassum
top venue similarity 0.66
Abstract · This paper has been accepted for publication in IEEE journals

Multi-frequency operation in beyond-5G and 6G systems renders the beam directions of large-aperture arrays frequency-dependent, giving rise to beam misalignment effects critical for reconfigurable intelligent surfaces (RISs). When an RIS phase profile is configured at one frequency but illuminated at another, the reflected field may exhibit main-lobe deviation and additional dominant lobes, degrading beamforming performance. In this paper, we develop a unified analytical framework to characterize these effects for uniform planar array-based RISs under both continuous and finite-resolution phase control. We formalize beam-squint as the deviation of the maximum-gain beam from the desired elevation-azimuth angle pair and beam-split as the emergence of additional maximum-gain beams under frequency mismatch and quantization. For continuous-phase RISs, we derive necessary and sufficient peak conditions, obtain closed-form elevation-azimuth peak families, and establish feasibility conditions as functions of the frequency ratio, incidence and configuration angles, and element spacing. Extending the analysis to b-bit phase quantization, we express the quantized beampattern as a superposition of harmonic array responses via Fourier expansion of the quantization-error phasor, leading to closed-form per-harmonic peak families, dominance ordering, and feasibility conditions. To capture peak displacement induced by harmonic superposition, we further develop a perturbation-based correction leveraging dominant-harmonic curvature and residual-harmonic gradients, improving peak-location accuracy without exhaustive two-dimensional searches. Numerical simulations validate the analysis, quantify peak deviations and beam-split probabilities, and demonstrate sum-rate gains by including analytically predicted squinted/split and harmonic candidates in multi-RIS, multi-user, multi-band networks.

0.44

Sparse Port Selection under Mutual Coupling in Fluid Antenna Arrays

cs.IT ·2026-08-16 ·Jingyuan Xu, Haoyu Liang, Zaichen Zhang, Jian Dang
similarity 0.66
Abstract

Fluid antenna systems obtain spatial degrees of freedom by reconfiguring antenna positions within a confined region, a principle that extends to beamforming: shaped beams can be synthesized using far fewer radio-frequency feeds than candidate antenna positions. When the candidates are densely arranged, however, electromagnetic mutual coupling changes the relationship among terminal voltages, induced currents, and radiated fields, so an uncoupled model no longer describes the hardware and may activate an unsuitable set of ports, distorting the synthesized pattern. This paper develops a mutual-coupling-aware framework that converts the desired beam amplitude into a finite-aperture-compatible complex target and models the complete antenna lattice as a coupled multiport network, selecting the active ports and their source voltages through the coupled voltage-to-field response. Inactive candidate ports remain part of the network and carry induced currents, and every compared design is evaluated through the same electromagnetic model under the same source-voltage budget. Numerical results show that the mutual-coupling-aware design improves both the average mainlobe signal-to-noise ratio (SNR) and the peak sidelobe level (PSLL) over coupling-unaware selection and a fixed array, demonstrating that mutual coupling should be exploited in the design itself rather than compensated only in the final evaluation.

0.38

Sparse Rotatable Arrays (SRA): Unifying Array Aperture and Antenna Directivity for Wireless Communications

cs.IT ·2026-08-12 ·Ailing Zheng, Qingqing Wu, Xiyuan Liu, Wen Chen
similarity 0.65
Abstract

Sparse rotatable array (SRA) is a novel reconfigurable antenna architecture that jointly exploits sparse aperture configuration and antenna directivity to enhance spatial resolution for future wireless communications. Specifically, SRA activates a subset of rotatable antennas over a large candidate aperture and adjusts their boresight directions, thereby creating a directionally selective sparse aperture with reduced hardware requirements and enhanced spatial flexibility. In this paper, we investigate an SRA-aided multi-group communication system, where users are organized into spatial groups with different service requirements. We develop a group-aware SRA design framework by jointly optimizing the sparse-aperture allocation, RA orientations, and transmit beamforming to maximize the weighted max-min signal-to-interference-plus-noise ratio (SINR). Then, we characterize the operating principles of SRA and reveal that sparse aperture improves spatial resolution by enlarging the effective array aperture, while antenna directivity suppresses inter-group coupling through directional control, thereby enabling simplified group-wise beamforming structures. Guided by these insights, we develop a structured low-complexity alternating optimization algorithm that embeds a closed-form projected group-center RA orientation rule into the sparse-aperture allocation and beamforming design. The proposed algorithm combines analysis-guided initialization, sampled multi-start antenna-allocation search, and bisection-based second-order cone programming for beamforming. Numerical results show that the proposed SRA design closely approaches fully-shared SRA benchmarks and significantly outperforms compact subarray and omni sparse-array schemes.

0.04

RF Chain Count to Mitigate Beam Split in Wideband Hybrid Arrays: From Far-Field to Near-Field

eess.SP ·2026-10-05 ·Ahmed Hussain, Asmaa Abdallah, Abdulkadir Celik, Ahmed M. Eltawil
similarity 0.64
Abstract

Deploying large antenna arrays transitions wireless communication into the radiative near-field (NF), where spherical wavefronts enable beamfocusing in the joint angle-distance domain. However, wideband beamforming with large antenna arrays suffers from beam split across both spatial dimensions. Although fully digital arrays can eliminate this impairment, their prohibitive hardware cost and power consumption motivate the adoption of hybrid array architectures equipped with a limited number of radio-frequency (RF) chains. This paper investigates the minimum number of RF chains required to mitigate the beam split. We derive closed-form expressions for the required number of RF chains in fully-connected (FC) architectures and propose an algorithm for sub-connected (SC) architectures, considering both uniform linear arrays (ULAs) and uniform circular arrays (UCAs). Our analysis reveals that beyond a focal distance of 10L, where L denotes the aperture length, the NF RF chain count converges to its far-field counterpart and becomes a function of the angle alone. Moreover, the FC hybrid architecture mitigates the beam split by using fewer RF chains than the SC architecture, albeit at the cost of increased complexity in the phase shifter network.

0.14

Learning-Assisted Beamforming Optimization for Hybrid XL-RIS-Aided Communication

cs.IT ·2026-11-07 ·Awuni Mohammed Abdul-Razak, Kyungchun Lee
similarity 0.63
Abstract · 13 pages, 8 figures

Hybrid active-passive extremely large-scale reconfigurable intelligent surface (XL-RIS) architectures mitigate the double-hop path loss of passive RIS while enabling near-field spatial energy focusing, but impose a computationally intensive mixed discrete-continuous beamforming design problem under strict radio-frequency (RF) power constraints. This paper investigates a hybrid XL-RIS-assisted downlink multi-user multiple-input single-output (MU-MISO) system in the near-field regime. The joint optimization of the base station (BS) precoder, discrete XL-RIS phase shifts, and active-element amplification gains is addressed via a discrete coordinate ascent (DCA)-based alternating optimization (AO) framework, in which discrete variables are updated through local index-domain searches and the BS precoder is derived in closed form via a noise-aware minimum mean-square error (MMSE) criterion. To reduce the per-sample computational cost for XL-RIS apertures, a deep unfolding (DU) framework is proposed as a low-complexity alternative, unrolling a fixed number of Riemannian gradient ascent steps on the sum-rate objective and recovering the discrete phase configuration via quantized phasor projection, with one learnable step size per layer trained in a self-supervised manner. Numerical results under near-field spherical-wave channel models confirm that the DU framework achieves sum-rate performance close to the AO scheme with substantially lower and nearly constant runtime, and that both schemes consistently outperform manifold optimization under discrete hardware constraints.

0.19

Robust Joint Beamforming and Configuration Design in FARIS-Aided Systems

eess.SP ·2026-08-28 ·Hong-Bae Jeon, Yonghwi Kim, Hyung-Joo Moon, Kai-Kit Wong
similarity 0.63
Abstract

In this paper, we propose a robust transmission design for multi-user systems assisted by a fluid active reconfigurable intelligent surface (FARIS), which enables both active reflection and dynamic port selection and thereby offers enhanced flexibility, under imperfect channel state information (CSI). We formulate a robust minimum sum-rate maximization problem by jointly optimizing the base station beamformer, the utilized FARIS coefficients, and the active element selection, while explicitly accounting for CSI errors and practical power constraints. The resulting problem is inherently nonconvex due to the coupled optimization variables and discrete port-selection structure. To tackle this challenge, we first reformulate the original problem via a weighted minimum mean square error (WMMSE) approach and then devise an alternating optimization (AO) framework, where each resulting subproblem admits efficient solutions and the overall algorithm converges to a stationary point. Simulation results demonstrate that the proposed robust FARIS scheme consistently outperforms conventional designs, highlighting the effectiveness of jointly leveraging degree-of-freedom (DoF) enhancement and active signal amplification under CSI uncertainty.

0.09