CS Paper Radar

Characterization of Beam-Squint and Beam-Split Effects in RIS-assisted Multi-Frequency Networks

Mohammad Amin Saeidi, Hina Tabassum

eess.SP ·submitted 2026-09-07 21:29 UTC · v1
top venue

Abstract

Multi-frequency operation in beyond-5G and 6G systems renders the beam directions of large-aperture arrays frequency-dependent, giving rise to beam misalignment effects critical for reconfigurable intelligent surfaces (RISs). When an RIS phase profile is configured at one frequency but illuminated at another, the reflected field may exhibit main-lobe deviation and additional dominant lobes, degrading beamforming performance. In this paper, we develop a unified analytical framework to characterize these effects for uniform planar array-based RISs under both continuous and finite-resolution phase control. We formalize beam-squint as the deviation of the maximum-gain beam from the desired elevation-azimuth angle pair and beam-split as the emergence of additional maximum-gain beams under frequency mismatch and quantization. For continuous-phase RISs, we derive necessary and sufficient peak conditions, obtain closed-form elevation-azimuth peak families, and establish feasibility conditions as functions of the frequency ratio, incidence and configuration angles, and element spacing. Extending the analysis to b-bit phase quantization, we express the quantized beampattern as a superposition of harmonic array responses via Fourier expansion of the quantization-error phasor, leading to closed-form per-harmonic peak families, dominance ordering, and feasibility conditions. To capture peak displacement induced by harmonic superposition, we further develop a perturbation-based correction leveraging dominant-harmonic curvature and residual-harmonic gradients, improving peak-location accuracy without exhaustive two-dimensional searches. Numerical simulations validate the analysis, quantify peak deviations and beam-split probabilities, and demonstrate sum-rate gains by including analytically predicted squinted/split and harmonic candidates in multi-RIS, multi-user, multi-band networks.

Comment
This paper has been accepted for publication in IEEE journals

Closest papers

Nearest neighbours by meaning across the whole index.

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

cs.IT ·2026-10-25 ·Jingyuan Xu, Yuanhui Wu, Zhentian Zhang, Zaichen Zhang, Tuo Wu +4 more
similarity 0.66
Abstract · 12 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

0.30

Properties of Array Factor of Reconfigurable Intelligent Surfaces for Radio Communications

eess.SP cs.IT ·2026-10-12 ·Symeon Vaidanis, Athanasios D. Panagopoulos
published similarity 0.65
Abstract · This work has been accepted for publication in 2024 IEEE INC-USNC-URSI Radio Science Meeting (Joint with AP-S Symposium)

This paper delves into the intricate aspects of Reconfigurable Intelligent Surfaces (RIS) in the antenna design. It investigates the properties of the array factor of RIS, highlighting the significance of phase shifts in establishing of the reflect path. Additionally, the paper investigates spatial positions requiring identical phase shifts, nullification of the array factor, the count of total maxima, second maximum determination (amplitude of the second lobe), and the calculation of the 3dB bandwidth. They are very useful for RIS-assisted radio communication systems.

0.40

Beam Squint and Aperture--Bandwidth Limitations in Wideband RIS-Assisted THz Links

cs.IT cs.NI ·2026-09-12 ·Waqas Khalid, Chiew Foong Kwong, David Chieng, Qianyu Liu
published similarity 0.65
Abstract · Accepted for 4th International Conference on Internet of Things and Cloud Computing Technology (IoTCCT 2026)

This paper analyzes the ergodic rate of a wideband reconfigurable intelligent surface (RIS)-assisted terahertz link under beam squint and finite-resolution phase control. Independent Rayleigh fading on the two RIS-assisted hops produces double-Rayleigh cascaded amplitudes. Exact second- and fourth-order channel moments are derived by incorporating the frequency-dependent array response and phase-quantization errors. Moment matching then provides a Gamma approximation for the received power on each subcarrier and a tractable closed-form approximation for the wideband ergodic rate. A first-null bandwidth approximation characterizes the aperture--bandwidth limitation of frequency-flat RIS control. Monte Carlo simulations validate the analytical framework.

0.31

Transmissive RIS-Assisted Vehicular Direct-to-Satellite Communications: Opportunities, Limitations, and Comparison with Phased Arrays

cs.IT cs.ET ·2026-08-29 ·Wali Ullah Khan, Abdullah Abdullah, Juan Andres Vazquez-Peralvo, Eva Lagunas
similarity 0.64
Abstract · 9, 2

This article studies transmissive reconfigurable intelligent surface (RIS)-assisted architectures. It compares them with electronically steered phased arrays for the deployment of vehicular direct-to-satellite (D2S) communications in future satellite networks. Rather than treating RIS as a direct replacement for phased arrays, we clarify the operating regimes in which RIS can serve as a low-power wavefront-shaping aperture and those in which phased arrays remain preferable because of their high gain and mature beam-tracking capability. Moreover, phased arrays can support multi-beam operation, which is particularly beneficial for dual connectivity and seamless handover. We distinguish analog, digital, and hybrid phased arrays, discuss the relationship between transmissive RIS and reconfigurable transmitarrays, and highlight practical profile, tracking, and link-budget constraints for mobile terminals. The comparison shows that passive RIS offers attractive power efficiency and aperture scalability, active RIS can partially improve the link budget, and phased arrays remain preferable for high-throughput.

0.13

Bringing Environmental Enhancement Back to Its Physical Essence via Specular Reflecting Surfaces

cs.IT ·2026-08-15 ·Qingxiao Huang, Qianyao Ren, Yiqin Deng, Jun Huang, Yang Kun +1 more
similarity 0.63
Abstract

Intelligent control of wireless propagation environments is crucial for future network capacity and reliability. Unlike circuit-controlled reconfigurable intelligent surfaces (RIS), mechanically actuated specular reflecting surfaces (SRS) offer a simpler and potentially more cost-effective alternative. In this paper, based on the tractable ray-based cascaded channel model with power-projection correction, we investigate the fundamental operational behaviors of an ideal SRS in free space. Specifically, in the angle-aligned near field, edge reflections cause non-constructive combining, resulting in a damped oscillatory convergence of the gain to an aperture-independent constant. We further obtain the far-field behavior, unbounded-aperture asymptotics, an optimal aperture size and reflection angle, and a gain-based near/far-field boundary. For misalignment, we provide accurate approximations for small and large apertures via center-point and stationary-point analyses. We also define the SRS beam pattern, derive analytical 3-dB beamwidths, and quantify the effective region where a main lobe exists. Finally, we derive a closed-form achievable-rate for an SRS-aided communication system. Numerical results validate the proposed expressions, reveal distinct near-/far-field behaviors of specular reflection, and show that SRS can outperform RIS in the far field due to continuous aperture and angular-resolution control and stronger power projection.

0.04

Optimization of Joint Beamforming in RIS-aided Multi-carrier and Multi-user MIMO Systems

cs.NI ·2026-11-04 ·Nuwan Balasuriya, Atefeh Termehchi, Ekram Hossain
similarity 0.62
Abstract

Reconfigurable intelligent surface (RIS)-aided multiple-input multiple-output (MIMO) communication is a promising enabler for beyond-fifth-generation wireless networks. However, RIS phase shifters typically rely on a tuning element (for example a variable-length stub), which can be optimally configured for only one carrier frequency at a time. This constraint complicates RIS deployment in multi-carrier systems and often necessitates additional measures, such as using multiple RIS panels or partitioning RIS elements across carriers. In this work, we propose a novel scheme in which all RIS elements simultaneously serve multiple carriers, delivering improved performance over existing approaches. Our method leverages the multiple reflections captured by physically consistent RIS models to realize the desired phase shifts for all carriers using a single stub length setting. We further develop a joint active and passive beamforming optimization framework tailored to multi-carrier, physically consistent RIS-aided systems. Simulation results confirm the effectiveness of the proposed

0.23

Reconfigurable Intelligent Surfaces: Architectures, Models, and Applications

eess.SY ·2026-10-05 ·Mojtaba Fallahzadeh, Mohammad Hossein Koohi Ghamsari, Alireza Mallahzadeh, Amirhossein Ghasemi, Gabriele Gradoni +1 more
similarity 0.61
Abstract

Reconfigurable Intelligent Surfaces (RIS), also known as programmable metasurfaces, have emerged as a promising technology for next-generation wireless communication systems by enabling programmable control over the propagation environment. Through dynamic manipulation of the phase, amplitude, and polarization of electromagnetic waves, RIS introduces new degrees of freedom for enhancing coverage, spectral efficiency, energy efficiency, and interference management. This article reviews recent advances in RIS-enabled wireless communications, focusing on RIS architectures, emerging design and analysis techniques, and their impact on system-level performance. Key challenges related to scalability, hardware non-idealities, channel modeling, and control overhead are discussed, along with promising solutions and future research directions toward practical RIS deployment in beyond-5G and 6G networks.

0.15

A Conformal Transmit-Reflect Array Enabling Multifunctional Bidirectional Beam Switching for Emergency Communication System

eess.SY ·2026-11-05 ·Yifei Liu, Fan Qin, Chao Gu, Wenchi Cheng, Steven Gao
similarity 0.60
Abstract

This article presents a conformal transmit-reflect array (CTRA) that enables bidirectional multibeam switching through a single metasurface aperture for emergency communication applications. To realize reconfigurable bidirectional beam switching, a transmit-reflect integrated element (TRIE) is developed by combining a polarization-selective transmissive structure with a complementary-symmetric reflective structure. The proposed element enables independent control of the cross-polarized transmission and reflection phases while exhibiting stable performance under oblique incidence. To support practical conformal implementations, a geometrical-optics-based phase compensation method is applied to cylindrical geometries, enabling effective wavefront control across the conformal aperture. By incorporating a polarization-switchable feed array (PSFA), multifunctional beam switching is achieved in the forward, backward, and bidirectional operating modes. The PSFA is configured as a nonuniform curved linear array near the focal region, enabling feed-selective beam switching within $\pm 30^\circ$ in both the $+z$ and $-z$ directions through selective excitation of the corresponding feed elements. The full-wave simulation results agree well with the measurements. The proposed CTRA achieves peak gains of 24.1 and 24.8 dBi in the forward and backward modes, respectively. The maximum aperture efficiencies in the forward and backward operating states are 28.4$\%$ and 33.4$\%$. These results demonstrate the effectiveness and flexibility of the proposed CTRA, making it a promising candidate for adaptive emergency communication systems.

0.25