CS Paper Radar

A Conformal Transmit-Reflect Array Enabling Multifunctional Bidirectional Beam Switching for Emergency Communication System

Yifei Liu, Fan Qin, Chao Gu, Wenchi Cheng, Steven Gao

eess.SY ·submitted 2026-11-05 08:40 UTC · v1

Abstract

This article presents a conformal transmit-reflect array (CTRA) that enables bidirectional multibeam switching through a single metasurface aperture for emergency communication applications. To realize reconfigurable bidirectional beam switching, a transmit-reflect integrated element (TRIE) is developed by combining a polarization-selective transmissive structure with a complementary-symmetric reflective structure. The proposed element enables independent control of the cross-polarized transmission and reflection phases while exhibiting stable performance under oblique incidence. To support practical conformal implementations, a geometrical-optics-based phase compensation method is applied to cylindrical geometries, enabling effective wavefront control across the conformal aperture. By incorporating a polarization-switchable feed array (PSFA), multifunctional beam switching is achieved in the forward, backward, and bidirectional operating modes. The PSFA is configured as a nonuniform curved linear array near the focal region, enabling feed-selective beam switching within $\pm 30^\circ$ in both the $+z$ and $-z$ directions through selective excitation of the corresponding feed elements. The full-wave simulation results agree well with the measurements. The proposed CTRA achieves peak gains of 24.1 and 24.8 dBi in the forward and backward modes, respectively. The maximum aperture efficiencies in the forward and backward operating states are 28.4$\%$ and 33.4$\%$. These results demonstrate the effectiveness and flexibility of the proposed CTRA, making it a promising candidate for adaptive emergency communication systems.

Closest papers

Nearest neighbours by meaning across the whole index.

A Wideband STAR-RIS Employing Shared-Aperture Polarization Conversion and Diagonal Switching Topology for 6G Applications

eess.SP ·2026-10-13 ·Ruiqi Wang, Atif Shamim
similarity 0.62
Abstract

Simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS) enable programmable wave control on both sides of a surface, extending wireless coverage beyond single-sided operation. However, practical STAR-RIS demonstrations in literature have narrow bandwidths, because it is challenging to achieve wideband reflection and transmission simultaneously from the same aperture. To overcome this limitation, a wideband STAR-RIS architecture is proposed based on shared-aperture polarization conversion and diagonal switching topology. Here, multiple resonances enable wideband magnitude responses and mirror-symmetric current reversal maintains $180^{\circ}$ phase difference in both reflection and transmission modes. Accordingly, a diagonal four-branch unit cell configuration is developed, where the tailored top patch directs the received wave either through a pair of blind vias connected by a buried strip to the shared top aperture for reflection, or to the bottom ring patch using a through via for transmission. Based on the proposed design, a 10 by 10 STAR-RIS prototype is fabricated and experimentally characterized. The measured 3-dB bandwidths reach 19.8% in reflection mode and 21.9% in transmission mode. Near-field measurements show average signal enhancements of 19.8 and 22.6 dB for reflection and transmission, respectively, over the wide frequency range of 6.8-8.4 GHz. Far-field measurements further demonstrate average received-power enhancements of 11.2 dB in reflection and 11.9 dB in transmission. To the best of the authors' knowledge, this work presents the first experimentally demonstrated wideband STAR-RIS covering the 7.125-8.4 GHz band within the emerging 6G FR3 spectrum.

0.20

Characterization of Beam-Squint and Beam-Split Effects in RIS-assisted Multi-Frequency Networks

eess.SP ·2026-09-07 ·Mohammad Amin Saeidi, Hina Tabassum
top venue similarity 0.60
Abstract · This paper has been accepted for publication in IEEE journals

Multi-frequency operation in beyond-5G and 6G systems renders the beam directions of large-aperture arrays frequency-dependent, giving rise to beam misalignment effects critical for reconfigurable intelligent surfaces (RISs). When an RIS phase profile is configured at one frequency but illuminated at another, the reflected field may exhibit main-lobe deviation and additional dominant lobes, degrading beamforming performance. In this paper, we develop a unified analytical framework to characterize these effects for uniform planar array-based RISs under both continuous and finite-resolution phase control. We formalize beam-squint as the deviation of the maximum-gain beam from the desired elevation-azimuth angle pair and beam-split as the emergence of additional maximum-gain beams under frequency mismatch and quantization. For continuous-phase RISs, we derive necessary and sufficient peak conditions, obtain closed-form elevation-azimuth peak families, and establish feasibility conditions as functions of the frequency ratio, incidence and configuration angles, and element spacing. Extending the analysis to b-bit phase quantization, we express the quantized beampattern as a superposition of harmonic array responses via Fourier expansion of the quantization-error phasor, leading to closed-form per-harmonic peak families, dominance ordering, and feasibility conditions. To capture peak displacement induced by harmonic superposition, we further develop a perturbation-based correction leveraging dominant-harmonic curvature and residual-harmonic gradients, improving peak-location accuracy without exhaustive two-dimensional searches. Numerical simulations validate the analysis, quantify peak deviations and beam-split probabilities, and demonstrate sum-rate gains by including analytically predicted squinted/split and harmonic candidates in multi-RIS, multi-user, multi-band networks.

0.44

Dynamic Metasurface Antennas: From Programmable Microwave Hardware to Next-Generation Wireless Systems

eess.SP ·2026-09-24 ·Abdul Jabbar, William Whittow
similarity 0.55
Abstract

As wireless systems evolve toward 6G and beyond, antenna apertures are increasingly expected to become more programmable, multifunctional, and responsive to diverse communication, sensing, and imaging requirements. Dynamic metasurface antennas (DMAs) offer a promising hardware pathway toward this vision by integrating electronically addressable metamaterial elements within microwave and millimeter-wave (mmWave) radiating apertures. Unlike conventional phased arrays relying on dedicated phase-shifting networks, DMAs manipulate guided waves in microwave structures through electronically controlled resonant elements. In this way, DMAs offer phase-shifter-less beam-steering, multibeam radiation, and programmable wavefront control. This article explores state-of-the-art DMA technology from a microwave-engineering perspective, spanning guided-wave excitation, reconfigurable resonant meta-elements, microwave tuning technologies, RF-digital integration, and FPGA-controlled beamforming. Closely related electronically steered metasurface antenna architectures are also discussed within a unified microwave-hardware framework. Recent advances illustrating how guided-wave DMA hardware and high-speed electronics facilitate programmable communication, sensing, imaging, and space-time functionalities are reviewed. Key microwave design challenges toward wideband, scalable, and highly integrated DMA apertures are highlighted. Finally, emerging opportunities in satellite communications, near-field connectivity, fixed wireless access, wave-domain computing, and integrated wireless functionalities are explored as future directions for DMA technology. This article provides a unified microwave engineering perspective on the design, practical implementation, and emerging capabilities of DMAs as programmable front-ends for next-generation wireless systems.

0.26

Transmissive RIS-Assisted Vehicular Direct-to-Satellite Communications: Opportunities, Limitations, and Comparison with Phased Arrays

cs.IT cs.ET ·2026-08-29 ·Wali Ullah Khan, Abdullah Abdullah, Juan Andres Vazquez-Peralvo, Eva Lagunas
similarity 0.55
Abstract · 9, 2

This article studies transmissive reconfigurable intelligent surface (RIS)-assisted architectures. It compares them with electronically steered phased arrays for the deployment of vehicular direct-to-satellite (D2S) communications in future satellite networks. Rather than treating RIS as a direct replacement for phased arrays, we clarify the operating regimes in which RIS can serve as a low-power wavefront-shaping aperture and those in which phased arrays remain preferable because of their high gain and mature beam-tracking capability. Moreover, phased arrays can support multi-beam operation, which is particularly beneficial for dual connectivity and seamless handover. We distinguish analog, digital, and hybrid phased arrays, discuss the relationship between transmissive RIS and reconfigurable transmitarrays, and highlight practical profile, tracking, and link-budget constraints for mobile terminals. The comparison shows that passive RIS offers attractive power efficiency and aperture scalability, active RIS can partially improve the link budget, and phased arrays remain preferable for high-throughput.

0.13

Bringing Environmental Enhancement Back to Its Physical Essence via Specular Reflecting Surfaces

cs.IT ·2026-08-15 ·Qingxiao Huang, Qianyao Ren, Yiqin Deng, Jun Huang, Yang Kun +1 more
similarity 0.54
Abstract

Intelligent control of wireless propagation environments is crucial for future network capacity and reliability. Unlike circuit-controlled reconfigurable intelligent surfaces (RIS), mechanically actuated specular reflecting surfaces (SRS) offer a simpler and potentially more cost-effective alternative. In this paper, based on the tractable ray-based cascaded channel model with power-projection correction, we investigate the fundamental operational behaviors of an ideal SRS in free space. Specifically, in the angle-aligned near field, edge reflections cause non-constructive combining, resulting in a damped oscillatory convergence of the gain to an aperture-independent constant. We further obtain the far-field behavior, unbounded-aperture asymptotics, an optimal aperture size and reflection angle, and a gain-based near/far-field boundary. For misalignment, we provide accurate approximations for small and large apertures via center-point and stationary-point analyses. We also define the SRS beam pattern, derive analytical 3-dB beamwidths, and quantify the effective region where a main lobe exists. Finally, we derive a closed-form achievable-rate for an SRS-aided communication system. Numerical results validate the proposed expressions, reveal distinct near-/far-field behaviors of specular reflection, and show that SRS can outperform RIS in the far field due to continuous aperture and angular-resolution control and stronger power projection.

0.04

A Sub-Aperture-Based Ray-Tracing Framework for Near-Field U-MIMO THz Communications

eess.SP ·2026-10-28 ·Federico Ruggeri, Sotiris Droulias, Jiming Chen, Angeliki Alexiou, Jie Zhang
similarity 0.54
Abstract · 5 pages, 5 figures, submitted to EUCaP27

Terahertz (THz) communications are characterized by antennas with large apertures and extended near-field (NF) region, offering the opportunity to develop adaptable beam manipulation strategies, particularly related to ultra-massive MIMO (U-MIMO). While Ray-Tracing (RT) offers an attractive alternative to full-wave methods, conventional ray-based approaches are generally formulated under far-field (FF) assumptions. We propose a technique that extends RT to the NF regime, enabling ray-based NF characterization of transmitting arrays. We model the transmitting array as an antenna aperture and develop a RT framework that partitions the transmitting aperture into sub-apertures emitting FF contributions which can be propagated via geometric optics (GO). We develop a Ray-Launching algorithm based on the proposed framework and assess its beam-reconstruction accuracy against full-wave propagation. The results demonstrate that, through tunable aperture partitioning, the proposed approach can reproduce beam manipulation effects characteristic of NF U-MIMO THz communications using GO ray propagation.

0.35

Movable-Element STAR-RIS for Integrated Sensing and Communication: Architectures, Opportunities, and Practical Challenges

cs.ET ·2026-09-10 ·Wali Ullah Khan, Muhammad Adil
similarity 0.54
Abstract · 9, 4

Simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) extend conventional reflecting-only surfaces by enabling controllable full-space propagation. Yet, once deployed, the physical locations of their elements remain fixed, leaving the surface geometry unable to adapt to users, sensing targets, blockage, or near-field focusing conditions. This article develops a system-level perspective on movable-element STAR-RIS (ME--STAR--RIS) for integrated sensing and communication (ISAC), where the surface jointly reconfigures its electromagnetic response and the physical positions of its elements. We explain how geometric reconfiguration can reshape the effective aperture, spatial correlation, interference nulls, and sensing illumination while preserving STAR-RIS full-space operation. A two-timescale control architecture separates relatively slow element motion from fast beamforming and transmission/reflection control. A 100-realization illustrative case study compares ME--STAR--RIS with an otherwise identical fixed STAR-RIS under a passive coupled transmission/reflection response. The results show a substantially improved sampled communication--sensing tradeoff and, importantly, a rapid saturation of the rate gain with modest element travel. We conclude with representative use cases, implementation constraints, and a research roadmap covering mobility overhead, channel acquisition, mutual coupling, near-field operation, hardware impairments, and learning-assisted predictive control.

0.21

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

cs.IT ·2026-10-25 ·Jingyuan Xu, Yuanhui Wu, Zhentian Zhang, Zaichen Zhang, Tuo Wu +4 more
similarity 0.54
Abstract · 12 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

0.30