CS Paper Radar

A Wideband STAR-RIS Employing Shared-Aperture Polarization Conversion and Diagonal Switching Topology for 6G Applications

Ruiqi Wang, Atif Shamim

eess.SP ·submitted 2026-10-13 18:29 UTC · v1

Abstract

Simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS) enable programmable wave control on both sides of a surface, extending wireless coverage beyond single-sided operation. However, practical STAR-RIS demonstrations in literature have narrow bandwidths, because it is challenging to achieve wideband reflection and transmission simultaneously from the same aperture. To overcome this limitation, a wideband STAR-RIS architecture is proposed based on shared-aperture polarization conversion and diagonal switching topology. Here, multiple resonances enable wideband magnitude responses and mirror-symmetric current reversal maintains $180^{\circ}$ phase difference in both reflection and transmission modes. Accordingly, a diagonal four-branch unit cell configuration is developed, where the tailored top patch directs the received wave either through a pair of blind vias connected by a buried strip to the shared top aperture for reflection, or to the bottom ring patch using a through via for transmission. Based on the proposed design, a 10 by 10 STAR-RIS prototype is fabricated and experimentally characterized. The measured 3-dB bandwidths reach 19.8% in reflection mode and 21.9% in transmission mode. Near-field measurements show average signal enhancements of 19.8 and 22.6 dB for reflection and transmission, respectively, over the wide frequency range of 6.8-8.4 GHz. Far-field measurements further demonstrate average received-power enhancements of 11.2 dB in reflection and 11.9 dB in transmission. To the best of the authors' knowledge, this work presents the first experimentally demonstrated wideband STAR-RIS covering the 7.125-8.4 GHz band within the emerging 6G FR3 spectrum.

Closest papers

Nearest neighbours by meaning across the whole index.

Reconfigurable Intelligent Surfaces: Architectures, Models, and Applications

eess.SY ·2026-10-05 ·Mojtaba Fallahzadeh, Mohammad Hossein Koohi Ghamsari, Alireza Mallahzadeh, Amirhossein Ghasemi, Gabriele Gradoni +1 more
similarity 0.62
Abstract

Reconfigurable Intelligent Surfaces (RIS), also known as programmable metasurfaces, have emerged as a promising technology for next-generation wireless communication systems by enabling programmable control over the propagation environment. Through dynamic manipulation of the phase, amplitude, and polarization of electromagnetic waves, RIS introduces new degrees of freedom for enhancing coverage, spectral efficiency, energy efficiency, and interference management. This article reviews recent advances in RIS-enabled wireless communications, focusing on RIS architectures, emerging design and analysis techniques, and their impact on system-level performance. Key challenges related to scalability, hardware non-idealities, channel modeling, and control overhead are discussed, along with promising solutions and future research directions toward practical RIS deployment in beyond-5G and 6G networks.

0.15

A Conformal Transmit-Reflect Array Enabling Multifunctional Bidirectional Beam Switching for Emergency Communication System

eess.SY ·2026-11-05 ·Yifei Liu, Fan Qin, Chao Gu, Wenchi Cheng, Steven Gao
similarity 0.62
Abstract

This article presents a conformal transmit-reflect array (CTRA) that enables bidirectional multibeam switching through a single metasurface aperture for emergency communication applications. To realize reconfigurable bidirectional beam switching, a transmit-reflect integrated element (TRIE) is developed by combining a polarization-selective transmissive structure with a complementary-symmetric reflective structure. The proposed element enables independent control of the cross-polarized transmission and reflection phases while exhibiting stable performance under oblique incidence. To support practical conformal implementations, a geometrical-optics-based phase compensation method is applied to cylindrical geometries, enabling effective wavefront control across the conformal aperture. By incorporating a polarization-switchable feed array (PSFA), multifunctional beam switching is achieved in the forward, backward, and bidirectional operating modes. The PSFA is configured as a nonuniform curved linear array near the focal region, enabling feed-selective beam switching within $\pm 30^\circ$ in both the $+z$ and $-z$ directions through selective excitation of the corresponding feed elements. The full-wave simulation results agree well with the measurements. The proposed CTRA achieves peak gains of 24.1 and 24.8 dBi in the forward and backward modes, respectively. The maximum aperture efficiencies in the forward and backward operating states are 28.4$\%$ and 33.4$\%$. These results demonstrate the effectiveness and flexibility of the proposed CTRA, making it a promising candidate for adaptive emergency communication systems.

0.25

Movable-Element STAR-RIS for 6G: From Programmable Propagation to Programmable Geometry

cs.ET ·2026-09-08 ·Wali Ullah Khan, Muhammad Adil
similarity 0.60
Abstract · 8, 4

Reconfigurable intelligent surfaces (RISs) make the wireless propagation environment programmable, while simultaneously transmitting and reflecting RISs (STAR-RISs) extend this capability to users located on both sides of a surface. However, conventional STAR-RIS architectures retain a fixed physical geometry after deployment. Movable-element STAR-RIS (ME-STAR-RIS) introduces an additional spatial degree of freedom by allowing the surface elements to reposition within prescribed regions while maintaining electronic control of their transmission and reflection responses. This combination of electromagnetic and geometric reconfiguration can alter propagation distances, multipath combinations, spatial correlation, interference, near-field focusing, and sensing geometry. This article presents a system-level perspective on ME-STAR-RIS through the concept of programmable geometry. We discuss its operating principles, movement architectures, and promising applications in communications, security, near-field systems, sensing, and high-mobility networks. A representative case study comparing optimized fixed and movable STAR-RIS architectures illustrates measurable spectral-efficiency gains from limited local displacement and the resulting saturation behavior. Finally, key hardware, channel-acquisition, electromagnetic, energy, reliability, and control challenges are discussed toward practical ME-STAR-RIS deployment.

0.24

Transmissive RIS-Assisted Vehicular Direct-to-Satellite Communications: Opportunities, Limitations, and Comparison with Phased Arrays

cs.IT cs.ET ·2026-08-29 ·Wali Ullah Khan, Abdullah Abdullah, Juan Andres Vazquez-Peralvo, Eva Lagunas
similarity 0.60
Abstract · 9, 2

This article studies transmissive reconfigurable intelligent surface (RIS)-assisted architectures. It compares them with electronically steered phased arrays for the deployment of vehicular direct-to-satellite (D2S) communications in future satellite networks. Rather than treating RIS as a direct replacement for phased arrays, we clarify the operating regimes in which RIS can serve as a low-power wavefront-shaping aperture and those in which phased arrays remain preferable because of their high gain and mature beam-tracking capability. Moreover, phased arrays can support multi-beam operation, which is particularly beneficial for dual connectivity and seamless handover. We distinguish analog, digital, and hybrid phased arrays, discuss the relationship between transmissive RIS and reconfigurable transmitarrays, and highlight practical profile, tracking, and link-budget constraints for mobile terminals. The comparison shows that passive RIS offers attractive power efficiency and aperture scalability, active RIS can partially improve the link budget, and phased arrays remain preferable for high-throughput.

0.13

Movable-Element STAR-RIS for 6G Non-Terrestrial Networks: Architectures, Enabling Technologies, and Open Challenges

eess.SP ·2026-09-10 ·Wali Ullah Khan, Muhammad Adil
similarity 0.57
Abstract · 9, 4

Non-terrestrial networks (NTNs) are emerging as a key component of 6G systems by extending ubiquitous and resilient connectivity across satellite, aerial, and terrestrial layers. However, severe propagation loss, rapidly varying geometry, Doppler, blockage, and stringent payload and energy constraints make efficient beam and propagation control particularly challenging. Movable-element STAR-RIS (ME-STAR-RIS) offers a new approach by combining full-space transmission/reflection control with reconfigurable surface geometry, thereby introducing an additional spatial degree of freedom for geometry-aware NTN operation. In this article, we first describe the operating principle, movement constraints, and potential hardware realizations of ME-STAR-RIS, and then present representative satellite-borne, aerial-relay, and cross-tier NTN architectures. We discuss the key enabling mechanisms, including joint geometry--electromagnetic optimization, mobility-aware channel acquisition, multi-timescale control, and predictive configuration. A LEO-centered numerical case study compares ME-STAR-RIS with an otherwise identical fixed STAR-RIS and demonstrates the benefit of element mobility across different transmit powers, movement ranges, and surface sizes, while revealing diminishing returns from increasingly large displacements. Finally, we discuss the main hardware, CSI, scalability, near-field, sensing, security, reliability, and standardization challenges, and highlight promising directions toward practical ME-STAR-RIS-enabled NTNs

0.18

Movable-Element STAR-RIS for Integrated Sensing and Communication: Architectures, Opportunities, and Practical Challenges

cs.ET ·2026-09-10 ·Wali Ullah Khan, Muhammad Adil
similarity 0.57
Abstract · 9, 4

Simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) extend conventional reflecting-only surfaces by enabling controllable full-space propagation. Yet, once deployed, the physical locations of their elements remain fixed, leaving the surface geometry unable to adapt to users, sensing targets, blockage, or near-field focusing conditions. This article develops a system-level perspective on movable-element STAR-RIS (ME--STAR--RIS) for integrated sensing and communication (ISAC), where the surface jointly reconfigures its electromagnetic response and the physical positions of its elements. We explain how geometric reconfiguration can reshape the effective aperture, spatial correlation, interference nulls, and sensing illumination while preserving STAR-RIS full-space operation. A two-timescale control architecture separates relatively slow element motion from fast beamforming and transmission/reflection control. A 100-realization illustrative case study compares ME--STAR--RIS with an otherwise identical fixed STAR-RIS under a passive coupled transmission/reflection response. The results show a substantially improved sampled communication--sensing tradeoff and, importantly, a rapid saturation of the rate gain with modest element travel. We conclude with representative use cases, implementation constraints, and a research roadmap covering mobility overhead, channel acquisition, mutual coupling, near-field operation, hardware impairments, and learning-assisted predictive control.

0.21

System-Level Gains of Dual-Band RIS: From Wireless Communication to SWIPT

eess.SP ·2026-10-01 ·Aritra Basu, Zina Mohamed, Sonia Aïssa
top venue similarity 0.56
Abstract · This work has been accepted for publication in IEEE Transactions on Communications. 2026 IEEE. Personal use of this material is permitted. P…

This paper introduces the integration of dual-band reconfigurable intelligent surfaces (DBRIS) in wireless system design, and investigates the ensuing performance gains in different application scenarios. This type of metasurfaces offers a compelling technology due to their reduced material usage, compact design, and multi-functional operation across multiple frequency bands compared to single-band RISs. Two representative use cases are considered to assess the achievable performance gains with the said integration, namely, DBRIS-assisted wireless communication, and DBRIS-assisted simultaneous wireless information and power transfer (SWIPT). For the first design, where the DBRIS is deployed as a relay, we focus on the energy efficiency (EE) maximization of the communication system. An alternating manifold method is proposed for the joint optimization of the source transmit power and the DBRIS phase shifting. For the second design, we investigate a DBRIS-assisted SWIPT system using a novel power splitting approach. An EE metric is defined, and an alternating optimization algorithm is developed to maximize it. Numerical results validate the advantages of the proposed design architectures as well as the proposed optimization framework. In particular, we highlight the energy efficiency gains enabled by the DBRIS as compared to operations with conventional single-frequency surfaces, in both application scenarios.

0.40

Characterization of Beam-Squint and Beam-Split Effects in RIS-assisted Multi-Frequency Networks

eess.SP ·2026-09-07 ·Mohammad Amin Saeidi, Hina Tabassum
top venue similarity 0.56
Abstract · This paper has been accepted for publication in IEEE journals

Multi-frequency operation in beyond-5G and 6G systems renders the beam directions of large-aperture arrays frequency-dependent, giving rise to beam misalignment effects critical for reconfigurable intelligent surfaces (RISs). When an RIS phase profile is configured at one frequency but illuminated at another, the reflected field may exhibit main-lobe deviation and additional dominant lobes, degrading beamforming performance. In this paper, we develop a unified analytical framework to characterize these effects for uniform planar array-based RISs under both continuous and finite-resolution phase control. We formalize beam-squint as the deviation of the maximum-gain beam from the desired elevation-azimuth angle pair and beam-split as the emergence of additional maximum-gain beams under frequency mismatch and quantization. For continuous-phase RISs, we derive necessary and sufficient peak conditions, obtain closed-form elevation-azimuth peak families, and establish feasibility conditions as functions of the frequency ratio, incidence and configuration angles, and element spacing. Extending the analysis to b-bit phase quantization, we express the quantized beampattern as a superposition of harmonic array responses via Fourier expansion of the quantization-error phasor, leading to closed-form per-harmonic peak families, dominance ordering, and feasibility conditions. To capture peak displacement induced by harmonic superposition, we further develop a perturbation-based correction leveraging dominant-harmonic curvature and residual-harmonic gradients, improving peak-location accuracy without exhaustive two-dimensional searches. Numerical simulations validate the analysis, quantify peak deviations and beam-split probabilities, and demonstrate sum-rate gains by including analytically predicted squinted/split and harmonic candidates in multi-RIS, multi-user, multi-band networks.

0.44