CS Paper Radar

Movable-Element STAR-RIS for 6G: From Programmable Propagation to Programmable Geometry

Wali Ullah Khan, Muhammad Adil

cs.ET ·submitted 2026-09-08 10:28 UTC · v1

Abstract

Reconfigurable intelligent surfaces (RISs) make the wireless propagation environment programmable, while simultaneously transmitting and reflecting RISs (STAR-RISs) extend this capability to users located on both sides of a surface. However, conventional STAR-RIS architectures retain a fixed physical geometry after deployment. Movable-element STAR-RIS (ME-STAR-RIS) introduces an additional spatial degree of freedom by allowing the surface elements to reposition within prescribed regions while maintaining electronic control of their transmission and reflection responses. This combination of electromagnetic and geometric reconfiguration can alter propagation distances, multipath combinations, spatial correlation, interference, near-field focusing, and sensing geometry. This article presents a system-level perspective on ME-STAR-RIS through the concept of programmable geometry. We discuss its operating principles, movement architectures, and promising applications in communications, security, near-field systems, sensing, and high-mobility networks. A representative case study comparing optimized fixed and movable STAR-RIS architectures illustrates measurable spectral-efficiency gains from limited local displacement and the resulting saturation behavior. Finally, key hardware, channel-acquisition, electromagnetic, energy, reliability, and control challenges are discussed toward practical ME-STAR-RIS deployment.

Comment
8, 4

Closest papers

Nearest neighbours by meaning across the whole index.

Movable-Element STAR-RIS for Integrated Sensing and Communication: Architectures, Opportunities, and Practical Challenges

cs.ET ·2026-09-10 ·Wali Ullah Khan, Muhammad Adil
similarity 0.82
Abstract · 9, 4

Simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) extend conventional reflecting-only surfaces by enabling controllable full-space propagation. Yet, once deployed, the physical locations of their elements remain fixed, leaving the surface geometry unable to adapt to users, sensing targets, blockage, or near-field focusing conditions. This article develops a system-level perspective on movable-element STAR-RIS (ME--STAR--RIS) for integrated sensing and communication (ISAC), where the surface jointly reconfigures its electromagnetic response and the physical positions of its elements. We explain how geometric reconfiguration can reshape the effective aperture, spatial correlation, interference nulls, and sensing illumination while preserving STAR-RIS full-space operation. A two-timescale control architecture separates relatively slow element motion from fast beamforming and transmission/reflection control. A 100-realization illustrative case study compares ME--STAR--RIS with an otherwise identical fixed STAR-RIS under a passive coupled transmission/reflection response. The results show a substantially improved sampled communication--sensing tradeoff and, importantly, a rapid saturation of the rate gain with modest element travel. We conclude with representative use cases, implementation constraints, and a research roadmap covering mobility overhead, channel acquisition, mutual coupling, near-field operation, hardware impairments, and learning-assisted predictive control.

0.21

Movable-Element STAR-RIS for 6G Non-Terrestrial Networks: Architectures, Enabling Technologies, and Open Challenges

eess.SP ·2026-09-10 ·Wali Ullah Khan, Muhammad Adil
similarity 0.77
Abstract · 9, 4

Non-terrestrial networks (NTNs) are emerging as a key component of 6G systems by extending ubiquitous and resilient connectivity across satellite, aerial, and terrestrial layers. However, severe propagation loss, rapidly varying geometry, Doppler, blockage, and stringent payload and energy constraints make efficient beam and propagation control particularly challenging. Movable-element STAR-RIS (ME-STAR-RIS) offers a new approach by combining full-space transmission/reflection control with reconfigurable surface geometry, thereby introducing an additional spatial degree of freedom for geometry-aware NTN operation. In this article, we first describe the operating principle, movement constraints, and potential hardware realizations of ME-STAR-RIS, and then present representative satellite-borne, aerial-relay, and cross-tier NTN architectures. We discuss the key enabling mechanisms, including joint geometry--electromagnetic optimization, mobility-aware channel acquisition, multi-timescale control, and predictive configuration. A LEO-centered numerical case study compares ME-STAR-RIS with an otherwise identical fixed STAR-RIS and demonstrates the benefit of element mobility across different transmit powers, movement ranges, and surface sizes, while revealing diminishing returns from increasingly large displacements. Finally, we discuss the main hardware, CSI, scalability, near-field, sensing, security, reliability, and standardization challenges, and highlight promising directions toward practical ME-STAR-RIS-enabled NTNs

0.18

Reconfigurable Intelligent Surfaces: Architectures, Models, and Applications

eess.SY ·2026-10-05 ·Mojtaba Fallahzadeh, Mohammad Hossein Koohi Ghamsari, Alireza Mallahzadeh, Amirhossein Ghasemi, Gabriele Gradoni +1 more
similarity 0.71
Abstract

Reconfigurable Intelligent Surfaces (RIS), also known as programmable metasurfaces, have emerged as a promising technology for next-generation wireless communication systems by enabling programmable control over the propagation environment. Through dynamic manipulation of the phase, amplitude, and polarization of electromagnetic waves, RIS introduces new degrees of freedom for enhancing coverage, spectral efficiency, energy efficiency, and interference management. This article reviews recent advances in RIS-enabled wireless communications, focusing on RIS architectures, emerging design and analysis techniques, and their impact on system-level performance. Key challenges related to scalability, hardware non-idealities, channel modeling, and control overhead are discussed, along with promising solutions and future research directions toward practical RIS deployment in beyond-5G and 6G networks.

0.15

Shape Adaptive Reconfigurable Holographic Surfaces

eess.SP ·2026-09-21 ·Jalal Jalali, Mostafa Darabi, Rodrigo C. de Lamare
publishedhighly cited similarity 0.64
Abstract

The evolution of wireless networks toward sixth-generation (6G) is driving demand for intelligent, flexible, and energy-efficient propagation control. Reconfigurable holographic surfaces (RHSs) enable fine-grained wavefront manipulation through densely packed programmable elements. This paper introduces shape-adaptive RHSs, which dynamically change surface geometry to provide extra spatial degrees of freedom. The adaptive design responds to environmental dynamics, mitigates blockages, and improves performance across urban communications, aerial coverage, and joint sensing and communication scenarios. We propose a network architecture that jointly designs the surface shape at the RHS and optimizes transmission. Simulation results show that the proposed shape-adaptive RHSs significantly increase data rates. These findings establish shape-adaptive RHS as a foundational technology for intelligent, context-aware wireless environments in 6G and beyond wireless networks.

0.56

Bringing Environmental Enhancement Back to Its Physical Essence via Specular Reflecting Surfaces

cs.IT ·2026-08-15 ·Qingxiao Huang, Qianyao Ren, Yiqin Deng, Jun Huang, Yang Kun +1 more
similarity 0.63
Abstract

Intelligent control of wireless propagation environments is crucial for future network capacity and reliability. Unlike circuit-controlled reconfigurable intelligent surfaces (RIS), mechanically actuated specular reflecting surfaces (SRS) offer a simpler and potentially more cost-effective alternative. In this paper, based on the tractable ray-based cascaded channel model with power-projection correction, we investigate the fundamental operational behaviors of an ideal SRS in free space. Specifically, in the angle-aligned near field, edge reflections cause non-constructive combining, resulting in a damped oscillatory convergence of the gain to an aperture-independent constant. We further obtain the far-field behavior, unbounded-aperture asymptotics, an optimal aperture size and reflection angle, and a gain-based near/far-field boundary. For misalignment, we provide accurate approximations for small and large apertures via center-point and stationary-point analyses. We also define the SRS beam pattern, derive analytical 3-dB beamwidths, and quantify the effective region where a main lobe exists. Finally, we derive a closed-form achievable-rate for an SRS-aided communication system. Numerical results validate the proposed expressions, reveal distinct near-/far-field behaviors of specular reflection, and show that SRS can outperform RIS in the far field due to continuous aperture and angular-resolution control and stronger power projection.

0.04

OpenRIS: Democratizing reconfigurable intelligent surfaces for real-world wireless enhancements

eess.SP ·2026-08-10 ·Weicong Chen, Junjie Ai, Lin Bai, Xiaokun Teng, Wen Jun Teng +5 more
code/data similarity 0.62
Abstract · This manuscript has been submitted for possible publication

Wireless enhancement is critical for next-generation mobile communication systems to realize seamless connectivity, yet traditional network expansion strategies are becoming economically unsustainable. Reconfigurable intelligent surfaces (RISs) provide a promising alternative by improving signal utilization. However, high hardware and deployment costs of advanced RISs limit their large-scale application. Here, we democratize this technology with OpenRIS, an open-source and low-cost platform composed of Lego-like meta-bricks. With digital-twin assistance, these meta-bricks can be flexibly assembled into arbitrary shapes to achieve customized, mass-deployable wireless enhancement without extra power. Experiments and full-wave simulations verify that the discretized OpenRIS achieves consistent performance with the continuous RIS. We further develop a dual-user wireless transmission system and a three-dimensional coverage measurement system to showcase the versatile applicability of OpenRIS in wireless enhancements. As a plug-and-play solution, OpenRIS accelerates the translation of RIS theory into practice and is poised to integrate into infrastructure, reshaping the future wireless world as steel and concrete shape modern cities.

0.20

Revolutionizing 6G Wireless Networks with RISs: Enhancements in Sensing and Communications

eess.SP ·2026-10-20 ·Jiguang He, Yuwen Cao, Charles Vanwynsberghe, Aymen Fakhreddine, Yi Fang +3 more
published similarity 0.62
Abstract · 7 pages, 6 figures, accepted by IEEE Communications Magazine

Reconfigurable intelligent surfaces (RISs) have emerged as one of the most promising technologies for the next-generation wireless networks, offering advantages such as cost efficiency, low power consumption, flexible deployment, and large effective aperture. Extensive studies have demonstrated the capabilities of RISs to enhance communication performance, including coverage extension, sum-rate improvement, interference suppression, security enhancement, etc. As 6G networks continue to evolve, wireless sensing is expected to play a pivotal role alongside communication. Undoubtedly, RISs possess great potential to enable seamless integration of sensing and communication by supporting both passive and active sensing paradigms. This paper explores how RISs can revolutionize wireless networks by enhancing both communication and sensing capabilities. Specifically, we highlight the fundamental principles, potential applications, and future trends of RIS-assisted integrated sensing and communication (ISAC), anticipating that RIS-enabled ISAC will become a key enabler in the upcoming 6G era.

0.23

Extremely Large Beyond-Diagonal RIS: Low-Rank Modal Optimization for Near-Field Communications

eess.SP ·2026-08-11 ·Giovanni Iacovelli, Chandan Kumar Sheemar, Eva Lagunas, Symeon Chatzinotas
theory similarity 0.61
Abstract

Beyond-diagonal reconfigurable intelligent surfaces (BD-RIS) achieve their best performance when fully connected, at the price of an optimization and hardware burden that grows quadratically, and per iteration cubically, with the number of elements. Extremely large surfaces make this burden prohibitive, while their sheer aperture places both the base station and the users in the radiative near field, where far-field design tools break down. This paper introduces the extremely large BD-RIS (XL-BD-RIS) concept and shows that near-field geometry is precisely what makes fully connected performance affordable at scale. Modeling the cascade with the free-space Green function, we prove that the aperture fields live in a low-dimensional subspace spanned by the spherical-wave responses of the terminal positions, and we design a compact unitary modal matrix on this subspace, built from localization information alone, that provably attains the fully connected optimum with a number of reconfigurable entries set by the geometry and independent of the panel size. A weighted-MMSE Riemannian algorithm optimizes the beamformers and the modal matrix with monotone convergence at panel-size-independent cost. Numerical results show that a $24\times24$-element panel reaches the fully connected optimum with about two hundred entries instead of three hundred thousand. A mismatched DFT beamspace pays a sixty-fold entry penalty rooted in the beam spread of spherical wavefronts, while the classical block-wise architecture delivers strictly lower rates at any matched entry budget.

0.34