CS Paper Radar

Shape Adaptive Reconfigurable Holographic Surfaces

Jalal Jalali, Mostafa Darabi, Rodrigo C. de Lamare

eess.SP ·submitted 2026-09-21 22:33 UTC · v1
publishedhighly cited

Abstract

The evolution of wireless networks toward sixth-generation (6G) is driving demand for intelligent, flexible, and energy-efficient propagation control. Reconfigurable holographic surfaces (RHSs) enable fine-grained wavefront manipulation through densely packed programmable elements. This paper introduces shape-adaptive RHSs, which dynamically change surface geometry to provide extra spatial degrees of freedom. The adaptive design responds to environmental dynamics, mitigates blockages, and improves performance across urban communications, aerial coverage, and joint sensing and communication scenarios. We propose a network architecture that jointly designs the surface shape at the RHS and optimizes transmission. Simulation results show that the proposed shape-adaptive RHSs significantly increase data rates. These findings establish shape-adaptive RHS as a foundational technology for intelligent, context-aware wireless environments in 6G and beyond wireless networks.

Closest papers

Nearest neighbours by meaning across the whole index.

Reconfigurable Intelligent Surfaces: Architectures, Models, and Applications

eess.SY ·2026-10-05 ·Mojtaba Fallahzadeh, Mohammad Hossein Koohi Ghamsari, Alireza Mallahzadeh, Amirhossein Ghasemi, Gabriele Gradoni +1 more
similarity 0.68
Abstract

Reconfigurable Intelligent Surfaces (RIS), also known as programmable metasurfaces, have emerged as a promising technology for next-generation wireless communication systems by enabling programmable control over the propagation environment. Through dynamic manipulation of the phase, amplitude, and polarization of electromagnetic waves, RIS introduces new degrees of freedom for enhancing coverage, spectral efficiency, energy efficiency, and interference management. This article reviews recent advances in RIS-enabled wireless communications, focusing on RIS architectures, emerging design and analysis techniques, and their impact on system-level performance. Key challenges related to scalability, hardware non-idealities, channel modeling, and control overhead are discussed, along with promising solutions and future research directions toward practical RIS deployment in beyond-5G and 6G networks.

0.15

OpenRIS: Democratizing reconfigurable intelligent surfaces for real-world wireless enhancements

eess.SP ·2026-08-10 ·Weicong Chen, Junjie Ai, Lin Bai, Xiaokun Teng, Wen Jun Teng +5 more
code/data similarity 0.66
Abstract · This manuscript has been submitted for possible publication

Wireless enhancement is critical for next-generation mobile communication systems to realize seamless connectivity, yet traditional network expansion strategies are becoming economically unsustainable. Reconfigurable intelligent surfaces (RISs) provide a promising alternative by improving signal utilization. However, high hardware and deployment costs of advanced RISs limit their large-scale application. Here, we democratize this technology with OpenRIS, an open-source and low-cost platform composed of Lego-like meta-bricks. With digital-twin assistance, these meta-bricks can be flexibly assembled into arbitrary shapes to achieve customized, mass-deployable wireless enhancement without extra power. Experiments and full-wave simulations verify that the discretized OpenRIS achieves consistent performance with the continuous RIS. We further develop a dual-user wireless transmission system and a three-dimensional coverage measurement system to showcase the versatile applicability of OpenRIS in wireless enhancements. As a plug-and-play solution, OpenRIS accelerates the translation of RIS theory into practice and is poised to integrate into infrastructure, reshaping the future wireless world as steel and concrete shape modern cities.

0.20

Movable-Element STAR-RIS for 6G: From Programmable Propagation to Programmable Geometry

cs.ET ·2026-09-08 ·Wali Ullah Khan, Muhammad Adil
similarity 0.64
Abstract · 8, 4

Reconfigurable intelligent surfaces (RISs) make the wireless propagation environment programmable, while simultaneously transmitting and reflecting RISs (STAR-RISs) extend this capability to users located on both sides of a surface. However, conventional STAR-RIS architectures retain a fixed physical geometry after deployment. Movable-element STAR-RIS (ME-STAR-RIS) introduces an additional spatial degree of freedom by allowing the surface elements to reposition within prescribed regions while maintaining electronic control of their transmission and reflection responses. This combination of electromagnetic and geometric reconfiguration can alter propagation distances, multipath combinations, spatial correlation, interference, near-field focusing, and sensing geometry. This article presents a system-level perspective on ME-STAR-RIS through the concept of programmable geometry. We discuss its operating principles, movement architectures, and promising applications in communications, security, near-field systems, sensing, and high-mobility networks. A representative case study comparing optimized fixed and movable STAR-RIS architectures illustrates measurable spectral-efficiency gains from limited local displacement and the resulting saturation behavior. Finally, key hardware, channel-acquisition, electromagnetic, energy, reliability, and control challenges are discussed toward practical ME-STAR-RIS deployment.

0.24

A New Paradigm of 6G Networks: Proactive Channel Cognition and Reconfiguration

eess.SP ·2026-08-30 ·Wenyan Ma, Zixiang Ren, Weitong Zhai, Ge Yan, Lipeng Zhu +2 more
survey similarity 0.63
Abstract

The sixth-generation (6G) wireless networks are expected to enable the deep integration of communication, sensing, computing, control, and intelligence in highly dynamic environments. This evolution drives a fundamental transition from conventional passive channel adaptation to proactive channel cognition and reconfiguration, wherein wireless channels are no longer regarded as uncontrollable propagation media but as network resources that can be learned, predicted, and actively reconfigured. This paper presents a comprehensive overview of this emerging paradigm. We first review channel cognition through the channel knowledge map (CKM) as a systematic framework for learning and exploiting channel characteristics across space, time, and frequency domain. The definitions, construction methods, and applications in wireless networks of CKMs are comprehensively reviewed. Building upon channel cognition, we then review channel reconfiguration technologies from two complementary perspectives: transceiver-side reconfiguration enabled by movable antennas (MAs) and environment-side reconfiguration enabled by intelligent reflecting surfaces (IRSs). For both MA- and IRS-enabled wireless systems, we review their architectures, performance advantages, and key design challenges. Finally, we discuss several promising research directions to inspire further innovations in this burgeoning field.

0.15

True 3D Holography: A Communication Service of Tomorrow and Its Requirements for a New Converged Cloud and Network Architecture on the Path to 6G

cs.NI cs.DCeess.SP ·2026-10-29 ·Ingo Friese, Mandy Galkow-Schneider, Louay Bassbouss, Alexander Zoubarev, Andy Neparidze +15 more
publishedhighly cited similarity 0.61
Abstract

Research project 6G NeXt is considering true 3D holography as a use case, setting requirements on the communication as well as the computing infrastructure. In a future holographic communication service, clients are widely spread in the network and cooperatively interact with each other. Especially for holographic communication high processing power is required as well. This makes a high-speed distributed backbone computing infrastructure, which realizes the concept of split computing, inevitable. Furthermore, tight integration between processing facilities and wireless networks is required in order to provide an immersive user experience. This paper illustrates true 3D holographic communication and its requirements. Afterward, an appropriate solution approach is elaborated. Here, novel technological approaches are discussed based on a proposed overall communication and computing architecture.

0.44

Revolutionizing 6G Wireless Networks with RISs: Enhancements in Sensing and Communications

eess.SP ·2026-10-20 ·Jiguang He, Yuwen Cao, Charles Vanwynsberghe, Aymen Fakhreddine, Yi Fang +3 more
published similarity 0.60
Abstract · 7 pages, 6 figures, accepted by IEEE Communications Magazine

Reconfigurable intelligent surfaces (RISs) have emerged as one of the most promising technologies for the next-generation wireless networks, offering advantages such as cost efficiency, low power consumption, flexible deployment, and large effective aperture. Extensive studies have demonstrated the capabilities of RISs to enhance communication performance, including coverage extension, sum-rate improvement, interference suppression, security enhancement, etc. As 6G networks continue to evolve, wireless sensing is expected to play a pivotal role alongside communication. Undoubtedly, RISs possess great potential to enable seamless integration of sensing and communication by supporting both passive and active sensing paradigms. This paper explores how RISs can revolutionize wireless networks by enhancing both communication and sensing capabilities. Specifically, we highlight the fundamental principles, potential applications, and future trends of RIS-assisted integrated sensing and communication (ISAC), anticipating that RIS-enabled ISAC will become a key enabler in the upcoming 6G era.

0.23

Movable-Element STAR-RIS for 6G Non-Terrestrial Networks: Architectures, Enabling Technologies, and Open Challenges

eess.SP ·2026-09-10 ·Wali Ullah Khan, Muhammad Adil
similarity 0.57
Abstract · 9, 4

Non-terrestrial networks (NTNs) are emerging as a key component of 6G systems by extending ubiquitous and resilient connectivity across satellite, aerial, and terrestrial layers. However, severe propagation loss, rapidly varying geometry, Doppler, blockage, and stringent payload and energy constraints make efficient beam and propagation control particularly challenging. Movable-element STAR-RIS (ME-STAR-RIS) offers a new approach by combining full-space transmission/reflection control with reconfigurable surface geometry, thereby introducing an additional spatial degree of freedom for geometry-aware NTN operation. In this article, we first describe the operating principle, movement constraints, and potential hardware realizations of ME-STAR-RIS, and then present representative satellite-borne, aerial-relay, and cross-tier NTN architectures. We discuss the key enabling mechanisms, including joint geometry--electromagnetic optimization, mobility-aware channel acquisition, multi-timescale control, and predictive configuration. A LEO-centered numerical case study compares ME-STAR-RIS with an otherwise identical fixed STAR-RIS and demonstrates the benefit of element mobility across different transmit powers, movement ranges, and surface sizes, while revealing diminishing returns from increasingly large displacements. Finally, we discuss the main hardware, CSI, scalability, near-field, sensing, security, reliability, and standardization challenges, and highlight promising directions toward practical ME-STAR-RIS-enabled NTNs

0.18

RIS-Enabled Integrated Access and Relay: Empowering Collaboration Among BSs

cs.NI ·2026-09-22 ·Hao Lin, Mustafa A. Kishk, Mohamed-Slim Alouini
published similarity 0.56
Abstract · 7 pages, 5 figures, 1 table, IEEE Internet of Things Magazine

The increasing number of Internet of Things (IoT) devices and applications leads to severe access congestion in conventional base station (BS) networks. Meanwhile, the low transmit power of IoT devices requires larger diversity gains from the system design. Therefore, low-cost traffic management and signal enhancement mechanisms become essential. Reconfigurable intelligent surfaces (RISs) are increasingly significant due to their flexibility and efficiency. Using reflection, refraction, and amplification, RISs can act as innovative relay nodes to overcome spatial limitations caused by blockages, and improve the coverage range of existing infrastructure. However, more extensive applications of RISs remain to be explored. In this paper, we propose to deploy co-sited RISs on BSs and use the integrated access and relay (IAR) architecture to enable wave-domain task-offloading between BSs, without requiring extra infrastructure or incurring extra decoding latency. Considering the fixed and dynamic sub-carrier schemes, we show the performance improvement in cell-free networks and cellular networks. In addition, we investigate the effect of RIS elements allocated to each IoT device in both cell-free and cellular networks. Finally, we discuss the opportunities and challenges of IAR BSs for future communications design.

0.44