CS Paper Radar

RIS-Enabled Integrated Access and Relay: Empowering Collaboration Among BSs

Hao Lin, Mustafa A. Kishk, Mohamed-Slim Alouini

cs.NI ·submitted 2026-09-22 18:45 UTC · v1
published

Abstract

The increasing number of Internet of Things (IoT) devices and applications leads to severe access congestion in conventional base station (BS) networks. Meanwhile, the low transmit power of IoT devices requires larger diversity gains from the system design. Therefore, low-cost traffic management and signal enhancement mechanisms become essential. Reconfigurable intelligent surfaces (RISs) are increasingly significant due to their flexibility and efficiency. Using reflection, refraction, and amplification, RISs can act as innovative relay nodes to overcome spatial limitations caused by blockages, and improve the coverage range of existing infrastructure. However, more extensive applications of RISs remain to be explored. In this paper, we propose to deploy co-sited RISs on BSs and use the integrated access and relay (IAR) architecture to enable wave-domain task-offloading between BSs, without requiring extra infrastructure or incurring extra decoding latency. Considering the fixed and dynamic sub-carrier schemes, we show the performance improvement in cell-free networks and cellular networks. In addition, we investigate the effect of RIS elements allocated to each IoT device in both cell-free and cellular networks. Finally, we discuss the opportunities and challenges of IAR BSs for future communications design.

Comment
7 pages, 5 figures, 1 table, IEEE Internet of Things Magazine
Journal ref
H. Lin, M. A. Kishk and M. -S. Alouini, IEEE Internet of Things Magazine, vol. 9, no. 4, pp. 23-29, July 2026
DOI
10.1109/MIOT.2026.3673149

Closest papers

Nearest neighbours by meaning across the whole index.

OpenRIS: Democratizing reconfigurable intelligent surfaces for real-world wireless enhancements

eess.SP ·2026-08-10 ·Weicong Chen, Junjie Ai, Lin Bai, Xiaokun Teng, Wen Jun Teng +5 more
code/data similarity 0.66
Abstract · This manuscript has been submitted for possible publication

Wireless enhancement is critical for next-generation mobile communication systems to realize seamless connectivity, yet traditional network expansion strategies are becoming economically unsustainable. Reconfigurable intelligent surfaces (RISs) provide a promising alternative by improving signal utilization. However, high hardware and deployment costs of advanced RISs limit their large-scale application. Here, we democratize this technology with OpenRIS, an open-source and low-cost platform composed of Lego-like meta-bricks. With digital-twin assistance, these meta-bricks can be flexibly assembled into arbitrary shapes to achieve customized, mass-deployable wireless enhancement without extra power. Experiments and full-wave simulations verify that the discretized OpenRIS achieves consistent performance with the continuous RIS. We further develop a dual-user wireless transmission system and a three-dimensional coverage measurement system to showcase the versatile applicability of OpenRIS in wireless enhancements. As a plug-and-play solution, OpenRIS accelerates the translation of RIS theory into practice and is poised to integrate into infrastructure, reshaping the future wireless world as steel and concrete shape modern cities.

0.20

Revolutionizing 6G Wireless Networks with RISs: Enhancements in Sensing and Communications

eess.SP ·2026-10-20 ·Jiguang He, Yuwen Cao, Charles Vanwynsberghe, Aymen Fakhreddine, Yi Fang +3 more
published similarity 0.66
Abstract · 7 pages, 6 figures, accepted by IEEE Communications Magazine

Reconfigurable intelligent surfaces (RISs) have emerged as one of the most promising technologies for the next-generation wireless networks, offering advantages such as cost efficiency, low power consumption, flexible deployment, and large effective aperture. Extensive studies have demonstrated the capabilities of RISs to enhance communication performance, including coverage extension, sum-rate improvement, interference suppression, security enhancement, etc. As 6G networks continue to evolve, wireless sensing is expected to play a pivotal role alongside communication. Undoubtedly, RISs possess great potential to enable seamless integration of sensing and communication by supporting both passive and active sensing paradigms. This paper explores how RISs can revolutionize wireless networks by enhancing both communication and sensing capabilities. Specifically, we highlight the fundamental principles, potential applications, and future trends of RIS-assisted integrated sensing and communication (ISAC), anticipating that RIS-enabled ISAC will become a key enabler in the upcoming 6G era.

0.23

Reconfigurable Intelligent Surfaces: Architectures, Models, and Applications

eess.SY ·2026-10-05 ·Mojtaba Fallahzadeh, Mohammad Hossein Koohi Ghamsari, Alireza Mallahzadeh, Amirhossein Ghasemi, Gabriele Gradoni +1 more
similarity 0.63
Abstract

Reconfigurable Intelligent Surfaces (RIS), also known as programmable metasurfaces, have emerged as a promising technology for next-generation wireless communication systems by enabling programmable control over the propagation environment. Through dynamic manipulation of the phase, amplitude, and polarization of electromagnetic waves, RIS introduces new degrees of freedom for enhancing coverage, spectral efficiency, energy efficiency, and interference management. This article reviews recent advances in RIS-enabled wireless communications, focusing on RIS architectures, emerging design and analysis techniques, and their impact on system-level performance. Key challenges related to scalability, hardware non-idealities, channel modeling, and control overhead are discussed, along with promising solutions and future research directions toward practical RIS deployment in beyond-5G and 6G networks.

0.15

HAPS-RIS or HAPS-Relay: Which Outperforms Under Impairments with NOMA in 6G NTN?

cs.NI ·2026-09-09 ·Bilal Karaman, Faicel Khennoufa, Ilhan Basturk, Metin Ozturk, Ferdi Kara +2 more
published similarity 0.60
Abstract · accepted in GLOBECOM 2026

This paper investigates the performance of high-altitude platform station (HAPS)-assisted communication systems employing either reconfigurable intelligent surfaces (RIS) or relay stations (RS) under non-orthogonal multiple access (NOMA) scheme. Practical system impairments, including hardware impairments (HWI) and imperfect channel state information (CSI), are explicitly considered. The results show that HAPS-RIS outperforms HAPS-RS in terms of both sum-rate and energy efficiency under non-ideal conditions due to its passive nature, which avoids noise amplification. Furthermore, it is demonstrated that RIS element allocation and user spatial distribution significantly impact NOMA performance, where increased user separation and proper allocation enhance channel disparity and improve system efficiency. Despite its higher sensitivity to imperfect CSI, HAPS-RIS can effectively compensate for performance degradation through large-scale RIS element deployment, maintaining a performance advantage over half-duplex RS-based systems. These insights provide useful design guidelines for impairment-aware HAPS-assisted 6G communication systems.

0.44

Rate-Splitting Multiple Access for RIS-Enabled Full-Duplex Communications with User Relaying

cs.IT ·2026-10-13 ·Yuwen Cao, Hui Wang, Tomoaki Ohtsuki, Shahid Mumtaz
similarity 0.59
Abstract

Rate splitting multiple access (RSMA) has emerged as a promising non-orthogonal transmission mechanism to improve spectral- and energy efficiency, and user fairness in multi-antenna broadband channels. To further enhance its performance, in this paper we investigate a novel cooperative RSMA (C-RSMA) transmission framework assisted by reconfigurable intelligent surface (RIS) and user relaying. More specifically, we first formulate the common- and private-rate maximization problem satisfying the transmit power constraint, by jointly optimizing the transmit beamformers at the BS and the reflective beamformer at the RIS. The above formulated problem is an intractable and NP-hard problem as the optimization variables are coupled and the strong residual self-interference (SI) is involved. To conquer the challenge mentioned above, we propose a low-complexity alternative optimization approach to jointly optimize the transmit and reflective beamforming. Simulation results show that our approach is capable of enabling superior sum-rate performance than the RIS-assisted space division multiple access (SDMA), half-duplex RSMA, and SDMA without using RIS schemes.

0.10

RIS-Assisted Secure ISAC: Fundamentals, Applications, and Future Directions

eess.SP ·2026-09-22 ·Zhendong Li, Jinyuan Huang, Weichun Zhao, Zhou Su, Enyu Shi +1 more
survey similarity 0.59
Abstract

Integrated sensing and communication (ISAC) has emerged as a key enabler for sixth-generation (6G) networks, yet its broadcast nature at the physical layer leaves transmissions vulnerable to malicious eavesdropping, particularly when physical blockages degrade direct links. Reconfigurable intelligent surface (RIS) offers a promising defense paradigm at the physical layer to address these issues, by reconstructing virtual line-of-sight links and dynamically reshaping the spatial propagation environment. In this article, we provide a comprehensive overview of RIS-assisted secure ISAC systems, covering its fundamentals, practical applications, and open future research directions. We first outline cooperative deployment topologies and basic electromagnetic operating principles. We then analyze the technical advantages of passive RIS integration in mitigating bottlenecks in resource competition across communication secrecy, sensing precision, and hardware sustainability. We also present representative applications, including urban vehicular networks, monitoring with unmanned aerial vehicle support, industrial Internet-of-thing, and privacy in smart homes. A case study quantifies gains in secrecy rate and spatial nulling capabilities achieved through joint active and passive beamforming under full blockage of direct links. Finally, we identify key open challenges and future research directions to enable practical, scalable, and intelligent deployment of RIS-assisted secure ISAC systems.

0.38

VHF Reconfigurable Intelligent Surfaces for Meteor Burst Communication

eess.SY ·2026-09-29 ·Rajiv Thummala, Luke Flores, Gregory Falco
published similarity 0.58
Abstract

Meteor Burst Communication (MBC) utilizes the transient ionized trails left by meteors to reflect Very High Frequency (VHF) signals, enabling long-range, beyond-line-of-sight communication without reliance on terrestrial or satellite infrastructure. Despite its resilience in austere and contested environments, MBC is limited by brief communication windows, low signal-to-noise ratio (SNR), and inconsistent channel availability. Recent advancements in Reconfigurable Intelligent Surfaces (RIS) offer a transformative solution by enabling dynamic control over signal propagation through programmable reflective elements. This paper proposes a novel system architecture that integrates RIS into MBC networks, incorporating real-time adaptive control, optimized deployment strategies, and Monte Carlo simulations to refine RIS placement and operational parameters.

0.38

Reconfigurable Intelligent Surfaces for Cognitive Radio Networks: Design, Optimization, and Emerging Trends

eess.SP ·2026-08-21 ·Diluka Galappaththige, Chintha Tellambura, Ranga Kulathunga, Gayan Amarasuriya Aruma Baduge
survey similarity 0.57
Abstract · 30 pages, 17 figures, 9 tables, tutorial

Reconfigurable intelligent surfaces (RISs) enable programmable wireless propagation environments, offering new opportunities for cognitive radio networks (CRNs) to improve spectrum utilization, enhance spectral and energy efficiency, and operate reliably under low signal-to-noise ratio conditions. By combining the complementary strengths of RISs and CRNs, RIS-assisted CRNs (RCNs) have emerged as a promising architecture for future 6G wireless systems. Despite their growing importance, a comprehensive survey of this rapidly evolving field has been lacking. This paper fills this gap by providing a systematic and comprehensive review of RCNs. The paper first introduces the fundamentals of CRNs and RISs, including dynamic spectrum access models, spectrum sensing techniques, RIS operating principles, and RIS architectures. It then examines the design of RCNs, covering their system architectures, deployment strategies, channel estimation, spectrum access mechanisms, communication protocols, and the joint optimization of RIS and CRN parameters. Next, the existing literature is organized into six major research directions: performance analysis, resource allocation and optimization, secure RCNs, active RISs, simultaneously transmitting and reflecting RISs, and machine learning-enabled RCNs. Finally, the paper discusses key research challenges and future directions, including scalability, practical deployment, integration with emerging 6G technologies, coexistence with evolving network architectures, standardization, and security and privacy. This survey provides a unified reference for researchers and practitioners and establishes a roadmap for the future development of RCNs.

0.25