CS Paper Radar

Rate-Splitting Multiple Access for RIS-Enabled Full-Duplex Communications with User Relaying

Yuwen Cao, Hui Wang, Tomoaki Ohtsuki, Shahid Mumtaz

cs.IT ·submitted 2026-10-13 15:43 UTC · v1

Abstract

Rate splitting multiple access (RSMA) has emerged as a promising non-orthogonal transmission mechanism to improve spectral- and energy efficiency, and user fairness in multi-antenna broadband channels. To further enhance its performance, in this paper we investigate a novel cooperative RSMA (C-RSMA) transmission framework assisted by reconfigurable intelligent surface (RIS) and user relaying. More specifically, we first formulate the common- and private-rate maximization problem satisfying the transmit power constraint, by jointly optimizing the transmit beamformers at the BS and the reflective beamformer at the RIS. The above formulated problem is an intractable and NP-hard problem as the optimization variables are coupled and the strong residual self-interference (SI) is involved. To conquer the challenge mentioned above, we propose a low-complexity alternative optimization approach to jointly optimize the transmit and reflective beamforming. Simulation results show that our approach is capable of enabling superior sum-rate performance than the RIS-assisted space division multiple access (SDMA), half-duplex RSMA, and SDMA without using RIS schemes.

Closest papers

Nearest neighbours by meaning across the whole index.

Beamforming Design for RIS-Assisted Backscatter NOMA in Underlay Cognitive Radio

eess.SP ·2026-10-06 ·Kgomotjo Seipobi, Fambirai Takawira, Chabalala Chabalala
hot direction similarity 0.71
Abstract

This paper investigates a reconfigurable intelligent surface (RIS)-assisted backscatter non-orthogonal multiple access (NOMA) network operating as the secondary system of an underlay cognitive radio network. A multi-antenna base station serves several user clusters through the RIS, each containing a backscatter device (BD). We maximise the weighted sum rate of the secondary network by jointly optimising the transmit beamformers and the RIS reflection matrix, subject to the power budget, the interference-temperature limit and minimum rate requirements. The non-convex problem is solved by alternating optimisation, using semidefinite relaxation and sequential rank-one constraint relaxation. Interference-normalised user ordering makes the successive interference cancellation constraints redundant. A closed-form equal-rate power split is derived; it agrees closely with simulation and costs about 4.5% of the sum rate. Supporting the BDs reduces the NOMA sum rate by 8.7% relative to a no-BD design, while a larger BD reflection coefficient raises the backscatter rate with little NOMA loss.

0.29

Rotatable Antenna Relaying: Joint Precoding and Antenna Pointing Design

eess.SP ·2026-08-25 ·Ying Gao, Qingqing Wu, Wen Chen
similarity 0.67
Abstract · 13 pages,8 figures,submitted to an IEEE journal for possible publication

This paper investigates a rotatable antenna (RA)-enhanced half-duplex amplify-and-forward relaying system, where a multi-antenna base station (BS) serves multiple single-antenna users via a multi-antenna relay. The BS and users employ isotropic antennas, whereas the relay employs directional RAs whose pointing matrix is shared by both hops to avoid inter-hop reorientation delay and control overhead. We aim to maximize the minimum signal-to-interference-plus-noise ratio (SINR) among all users by jointly optimizing the BS precoding, relay precoding, and RA pointing matrices. To tackle this non-convex problem, we first investigate the single-user scenario and reduce the joint design to RA pointing optimization using the optimal relay precoding matrix available in closed form. A manifold-aware Frank--Wolfe (MFW) method is then employed to obtain a suboptimal pointing solution. Under a symmetric far-field line-of-sight geometry, we further characterize the globally optimal pointing structure and derive a directivity threshold separating common pointing from antenna splitting. Building on this MFW procedure, we next address the general multiuser scenario. Specifically, the quadratic transform is first applied to obtain an equivalent auxiliary-variable formulation, which is subsequently solved suboptimally via alternating optimization (AO). In particular, we employ a safeguarded extension of the MFW method based on log-sum-exp smoothing to update the RA pointing matrix in each AO iteration. Simulation results demonstrate that the proposed algorithms consistently achieve the best signal-to-noise ratio (SNR) and SINR performance among all considered schemes. It is further shown that the optimized RA pointing adapts to the two-hop geometry, the preferred directivity factor depends on user load, and relay placement with relatively balanced two-hop propagation conditions is generally preferable.

0.25

Pinching Antenna-Assisted Full-Duplex Communication Systems

cs.IT ·2026-09-24 ·Xuan Li, Xianfu Lei, Mingjiang Wu, Sotiris A. Tegos, Panagiotis D. Diamantoulakis +1 more
similarity 0.67
Abstract

Full-duplex (FD) communication theoretically doubles spectral efficiency. Despite this potential, its practical performance is primarily constrained by severe self-interference (SI) and co-channel interference. Moreover, conventional fixed antenna arrays suffer from limited spatial flexibility, resulting in insufficient spatial isolation for SI suppression. To address this issue, this letter proposes an FD architecture assisted by pinching antenna systems (PASS). By dynamically adjusting transmit and receive antenna positions, the system enables large-scale channel reconfiguration, thereby synergizing with the base station (BS) beamforming to suppress SI and enhance the desired signal reception. To demonstrate the potential of PASS for FD communication, we formulate a weighted sum-rate maximization problem that jointly optimizes antenna positions, BS beamforming, and power allocation. To tackle this non-convex problem, we reformulate it using the weighted minimum mean square error (WMMSE) framework and develop an efficient alternating optimization (AO) algorithm to iteratively update the optimization variables. Simulation results reveal that the proposed PASS-assisted FD architecture significantly outperforms conventional fixed antenna arrays, achieving substantial sum-rate gains while effectively mitigating SI to enable FD operation.

0.14

Exploiting Movable-Element STARS for Rate Splitting Multiple Access

eess.SP ·2026-08-17 ·Muhammad Asif, Asim Ihsan, Irfan Muhammad, Mohd Hamza Naim Shaikh, Muhammad Ayzed Mirza +2 more
benchmark similarity 0.66
Abstract · 13 pages, 10 figures

This paper investigates a movable-element simultaneously transmitting and reflecting reconfigurable intelligent surface (ME-STARS) assisted rate-splitting multiple access (RSMA) system under imperfect channel state information (CSI). Unlike conventional STARS with fixed element positions, the elements of ME-STARS can be repositioned within a predefined region, providing additional spatial degrees of freedom for improving the cascaded transmitter--STARS--user channels. To exploit this flexibility while accounting for CSI uncertainty, we formulate a robust sum-rate maximization problem that jointly optimizes the transmit beamforming, common-rate allocation, reflection and transmission coefficients, and ME-STARS element positions, subject to transmit-power, user-rate, minimum inter-element spacing, and movement-region constraints. The resulting problem is highly non-convex due to the strong coupling among the design variables and the position-dependent channels. To address this challenge, an iterative optimization framework is developed in which the transmit beamforming, STARS coefficients, and element positions are successively optimized through tractable convex reformulations. In particular, the element positions are updated sequentially using a majorization--minimization (MM) framework, where quadratic surrogate functions are constructed from the first- and second-order derivatives of the position-dependent channels while preserving the minimum inter-element spacing constraint. Simulation results demonstrate that the proposed ME-STARS design consistently outperforms the considered benchmark schemes. Moreover, the performance gains remain significant under increasing CSI uncertainty, highlighting the effectiveness of element repositioning for robust RSMA transmission.

0.49

RIS-Assisted Multiuser NOMA Networks With Imperfect CSI Under Transceiver Hardware Impairments

cs.IT ·2026-09-28 ·Qian Zhang, Maoyuan Wang, Xuejun Cheng, Yufei Zhao, Guanghui Luo +1 more
published similarity 0.66
Abstract

The incorporation of non-orthogonal multiple access (NOMA) and reconfigurable intelligent surface (RIS) provides a new solution to improve spectral efficiency. Unfortunately, the channel estimation error of RIS is noteworthy due to the absent active radio frequency link. Meanwhile, the transceivers at base stations (BS) and users also exist hardware impairments (HWI). The imperfect channel state information (CSI) and HWI will degrade the communication performance such as outage probability or data rate. To alleviate such performance deterioration, we propose a robust design scheme to minimize the BS transmit power when the target rate of users is satisfied in RIS-assisted single-beam and multi-beam NOMA networks with transceiver HWI and imperfect CSI. Further, the perfect successive interference cancellation (SIC) condition in single-beam and multi-beam NOMA networks is investigated, and the optimization problem is proposed based on perfect SIC conditions. To tackle the non-convex problem, we provide an effective algorithm combining Bernstein-type inequality and semi-definite relaxation. Numerical results demonstrate that the proposed scheme outperforms non-robust RIS-assisted NOMA scheme that ignores HWI and imperfect CSI. Moreover, the multi-beam NOMA network obtains higher beam gain compared to the single-beam NOMA network, and thus there is a superior performance in multi-beam NOMA networks.

0.44

NOMA-Assisted Multi-User Hybrid Wireless-Fed Pinching-Antenna Systems

cs.IT ·2026-09-20 ·Hui Yang, Peng Zhu, Ming Zeng, Ebrahim Bedeer, Saeid Pakravan +1 more
similarity 0.64
Abstract · submitted to IEEE journals

This paper investigates a non-orthogonal multiple-access (NOMA)-assisted multi-user wireless-fed pinching-antenna system (Wi-PASS). A multi-antenna base station (BS) simultaneously serves one direct user and wirelessly feeds a full-duplex amplify-and-forward relay equipped with a directional horn receiver. The relay injects the NOMA waveform into a dielectric waveguide, and one position-adjustable pinching antenna serves two additional users. Under maximum-gain zero-forcing transmission, ideal successive interference cancellation, and an additive residual self-interference model, we minimize the total consumed power by jointly optimizing the BS powers, relay amplification factor, NOMA power coefficients, decoding order, and pinching-antenna position. For a fixed position and decoding order, a variable transformation reduces the resource-allocation problem to a strictly convex scalar problem and yields a closed-form global solution. The position-dependent decoding order partitions the waveguide into finitely many intervals, and the derivative of the optimized power is governed by a quadratic polynomial on each interval. Hence, the globally optimal position is found by evaluating a small finite candidate set. Simulations at 28~GHz over 1000 random user topologies show that the proposed architecture consistently requires the lowest consumed power among direct-transmission, array-fed, no-PASS, and equal-time orthogonal multiple-access (OMA) benchmarks. At target signal-to-interference-plus-noise ratios of 20, 25, and 30~dB, it reduces the average power by 19.2%, 21.1%, and 21.7%, respectively, relative to equal-time OMA, while preserving its advantage as the BS-relay distance and residual SI increase.

0.54

Near-Field Beamforming Design for Multi-IRS Wireless Beam Routing

eess.SP ·2026-10-07 ·Tao Wang, Changsheng You, Changchuan Yin
published similarity 0.62
Abstract · 5 pages, 3 figures, accepted by IEEE Communications Letters

This letter investigates efficient near-field beamforming designs for wireless communication systems aided by multiple extremely large-scale intelligent reflecting surfaces (Multi-XL-IRSs). Previous studies have mostly assumed far-field channel conditions, based on which angle-based beamforming is adopted for the base station (BS) and IRSs. However, this approach may lead to degraded performance in practical near-field scenarios. To address this issue, we consider near-field channel modeling and formulate an optimization problem aimed at maximizing the received power at the user equipment (UE) by jointly optimizing the beamforming at the BS and IRSs. Given the intractability under the beam training (BT)-based communication framework, the problem is revisited and reformulated. Subsequently, an efficient algorithm based on alternating optimization (AO) is proposed to solve the reformulated problem. Numerical results demonstrate that, in typical setups, our AO-based beamforming designs provide over 170% and 20% received power gains over conventional angle-based beamforming and beam focusing, respectively. Furthermore, the power scaling law derived under far-field conditions no longer holds in near-field scenarios.

0.56

Joint Transmit Power and Reflection Coefficient Optimization for Underlay Cognitive Radio Ambient Backscatter Communication

eess.SP ·2026-10-31 ·Chabalala S. Chabalala, Peter Odero Akuon, Zhen Gao
theory similarity 0.62
Abstract · Ambient backscatter communication (AmBC), cognitive radio networks (CRNs), interference management, outage performance, power reflection coe…

The integration of cognitive radio (CR) technology with backscatter communication offers a promising solution for developing spectrum-efficient and low-power wireless networks. In this paper, we investigate the performance of an underlay cognitive radio ambient backscatter communication (CR-AmBC) system operating under primary network (PN) interference constraints. The objective is to maximize the performance of the CR-AmBC system while protecting the PN from interference. Differing from prior work, our formulation jointly accounts for: (i) interference from the PN on the CR receivers, (ii) interference from the backscatter device (BD) on the PN receiver, and (iii) imperfect successive interference cancellation (i-SIC) at the secondary destination. We propose a joint transmit power and reflection coefficient optimization framework that incorporates the minimum data rate requirements, the PN interference constraint, and i-SIC for decoding the BD signal. The nonconvex problem is decomposed into two subproblems solved via alternating optimization: (a) a closed-form expression for the feasible transmit power given a fixed reflection coefficient, and (b) an efficient one-dimensional search for the reflection coefficient. We prove that the power update is optimal, reducing the joint problem to a one-dimensional search, with monotone convergence and $\mathcal{O}(KN_β)$ complexity for $K$ iterations and $N_β$ search points. We present a comprehensive simulation-based performance evaluation and the results demonstrate that the proposed joint transmission power and reflection coefficient optimization provides an effective strategy to maximize the performance of the CR-AmBC system without violating the PN protection constraints.

0.07