CS Paper Radar

Joint Transmit Power and Reflection Coefficient Optimization for Underlay Cognitive Radio Ambient Backscatter Communication

Chabalala S. Chabalala, Peter Odero Akuon, Zhen Gao

eess.SP ·submitted 2026-10-31 10:24 UTC · v1
theory

Abstract

The integration of cognitive radio (CR) technology with backscatter communication offers a promising solution for developing spectrum-efficient and low-power wireless networks. In this paper, we investigate the performance of an underlay cognitive radio ambient backscatter communication (CR-AmBC) system operating under primary network (PN) interference constraints. The objective is to maximize the performance of the CR-AmBC system while protecting the PN from interference. Differing from prior work, our formulation jointly accounts for: (i) interference from the PN on the CR receivers, (ii) interference from the backscatter device (BD) on the PN receiver, and (iii) imperfect successive interference cancellation (i-SIC) at the secondary destination. We propose a joint transmit power and reflection coefficient optimization framework that incorporates the minimum data rate requirements, the PN interference constraint, and i-SIC for decoding the BD signal. The nonconvex problem is decomposed into two subproblems solved via alternating optimization: (a) a closed-form expression for the feasible transmit power given a fixed reflection coefficient, and (b) an efficient one-dimensional search for the reflection coefficient. We prove that the power update is optimal, reducing the joint problem to a one-dimensional search, with monotone convergence and $\mathcal{O}(KN_β)$ complexity for $K$ iterations and $N_β$ search points. We present a comprehensive simulation-based performance evaluation and the results demonstrate that the proposed joint transmission power and reflection coefficient optimization provides an effective strategy to maximize the performance of the CR-AmBC system without violating the PN protection constraints.

Comment
Ambient backscatter communication (AmBC), cognitive radio networks (CRNs), interference management, outage performance, power reflection coefficient

Closest papers

Nearest neighbours by meaning across the whole index.

Beamforming Design for RIS-Assisted Backscatter NOMA in Underlay Cognitive Radio

eess.SP ·2026-10-06 ·Kgomotjo Seipobi, Fambirai Takawira, Chabalala Chabalala
hot direction similarity 0.79
Abstract

This paper investigates a reconfigurable intelligent surface (RIS)-assisted backscatter non-orthogonal multiple access (NOMA) network operating as the secondary system of an underlay cognitive radio network. A multi-antenna base station serves several user clusters through the RIS, each containing a backscatter device (BD). We maximise the weighted sum rate of the secondary network by jointly optimising the transmit beamformers and the RIS reflection matrix, subject to the power budget, the interference-temperature limit and minimum rate requirements. The non-convex problem is solved by alternating optimisation, using semidefinite relaxation and sequential rank-one constraint relaxation. Interference-normalised user ordering makes the successive interference cancellation constraints redundant. A closed-form equal-rate power split is derived; it agrees closely with simulation and costs about 4.5% of the sum rate. Supporting the BDs reduces the NOMA sum rate by 8.7% relative to a no-BD design, while a larger BD reflection coefficient raises the backscatter rate with little NOMA loss.

0.29

Rate-Splitting Multiple Access for RIS-Enabled Full-Duplex Communications with User Relaying

cs.IT ·2026-10-13 ·Yuwen Cao, Hui Wang, Tomoaki Ohtsuki, Shahid Mumtaz
similarity 0.62
Abstract

Rate splitting multiple access (RSMA) has emerged as a promising non-orthogonal transmission mechanism to improve spectral- and energy efficiency, and user fairness in multi-antenna broadband channels. To further enhance its performance, in this paper we investigate a novel cooperative RSMA (C-RSMA) transmission framework assisted by reconfigurable intelligent surface (RIS) and user relaying. More specifically, we first formulate the common- and private-rate maximization problem satisfying the transmit power constraint, by jointly optimizing the transmit beamformers at the BS and the reflective beamformer at the RIS. The above formulated problem is an intractable and NP-hard problem as the optimization variables are coupled and the strong residual self-interference (SI) is involved. To conquer the challenge mentioned above, we propose a low-complexity alternative optimization approach to jointly optimize the transmit and reflective beamforming. Simulation results show that our approach is capable of enabling superior sum-rate performance than the RIS-assisted space division multiple access (SDMA), half-duplex RSMA, and SDMA without using RIS schemes.

0.10

RIS-Assisted Multiuser NOMA Networks With Imperfect CSI Under Transceiver Hardware Impairments

cs.IT ·2026-09-28 ·Qian Zhang, Maoyuan Wang, Xuejun Cheng, Yufei Zhao, Guanghui Luo +1 more
published similarity 0.61
Abstract

The incorporation of non-orthogonal multiple access (NOMA) and reconfigurable intelligent surface (RIS) provides a new solution to improve spectral efficiency. Unfortunately, the channel estimation error of RIS is noteworthy due to the absent active radio frequency link. Meanwhile, the transceivers at base stations (BS) and users also exist hardware impairments (HWI). The imperfect channel state information (CSI) and HWI will degrade the communication performance such as outage probability or data rate. To alleviate such performance deterioration, we propose a robust design scheme to minimize the BS transmit power when the target rate of users is satisfied in RIS-assisted single-beam and multi-beam NOMA networks with transceiver HWI and imperfect CSI. Further, the perfect successive interference cancellation (SIC) condition in single-beam and multi-beam NOMA networks is investigated, and the optimization problem is proposed based on perfect SIC conditions. To tackle the non-convex problem, we provide an effective algorithm combining Bernstein-type inequality and semi-definite relaxation. Numerical results demonstrate that the proposed scheme outperforms non-robust RIS-assisted NOMA scheme that ignores HWI and imperfect CSI. Moreover, the multi-beam NOMA network obtains higher beam gain compared to the single-beam NOMA network, and thus there is a superior performance in multi-beam NOMA networks.

0.44

Energy Efficiency Maximization for FAS-Assisted Downlink Communication in Mobile Embodied AI Networks (MEAN) over Interference Channels

eess.SP ·2026-08-13 ·Ruopeng Xu, Zhaohui Yang, Jiaxiang Wang, Chenliang Wu, Zhaoyang Zhang
benchmark similarity 0.61
Abstract

In this paper, we investigate a fluid antenna system (FAS)-assisted downlink mobile embodied AI network (MEAN) over interference channels, where multiple base station (BS)-agent pairs reuse the same spectrum. The BSs employ FASs to improve the communication quality, while the mobile embodied artificial intelligence (AI) agents can adjust their positions according to environment-aware channel information, such as a channel-to-interference-plus-noise map (CINM). Considering both co-channel interference and the energy consumption caused by communication and agent movement, we formulate an energy efficiency (EE) maximization problem by jointly optimizing the agent positions, FAS port selections, and transmit powers. To solve this mixed-integer non-convex problem, we first derive the optimal transmit power in closed form for given agent positions and FAS ports. We then develop an iterative algorithm with adaptive FAS-port optimization and sequential agent-position optimization, together with a low-complexity power-update method. Simulation results demonstrate that the proposed design outperforms the considered benchmark schemes and provides improved feasibility under severe noise conditions.

0.04

Interference-Aware Downlink Power Control for High-Altitude Platform Stations with QoS and Max-Min Fairness

eess.SP ·2026-10-08 ·Rajan Shrestha, Hayder Al-Hraishawi
published similarity 0.61
Abstract · Accepted for presentation at IEEE Consumer Communications & Networking Conference (CCNC 2027)

High-altitude platform stations (HAPS) are a promising component of non-terrestrial networks (NTNs) for wide-area connectivity. However, serving multiple users over large user footprints requires efficient power-control mechanisms that account for the unique propagation characteristics and strict power constraints of HAPS. This paper develops a tractable analytical and optimization framework for downlink power allocation in HAPS systems under statistical channel state information, 3GPP NTN path loss, and Rician fading. A closed-form expression for the signal-to-interference-plus-noise ratio (SINR) with mean-channel maximal-ratio transmission (MRT) precoding is derived, capturing geometry-dependent inter-user interference coupling. Based on this, two power-control schemes are proposed: quality-of-service (QoS)-constrained power minimization and max-min SINR fairness. The QoS solution is obtained in closed form or through a low-complexity fixed-point iteration, while the max-min solution is obtained through bisection. Numerical results demonstrate up to 6 dB reduction in required transmit power at moderate-to-high target rates and improved worst-user SINR compared to the uniform power, inverse path-loss, and geometry-aware heuristic allocations. The proposed QoS-optimal scheme also achieves a QoS feasibility probability of approximately 0.95 at R_req = 2.5 bits/s/Hz and P_max = 35 dBm, while the uniform power, inverse path-loss, and geometry-aware heuristic allocations achieve less than 0.4. Moreover, the proposed schemes achieve performance comparable to the linear programming (LP)-based benchmarks at a fraction of the computational cost, reducing the average computation time by approximately 99.97% when K = 20.

0.25

Blind Interference Suppression for IRS-Aided Robust Wireless Communications

eess.SP ·2026-09-30 ·Tao Wang, Xiaohui Zhang, Hehe Ban, Yiwei Guo, Ming Yi
publishedbenchmark similarity 0.60
Abstract · 13 pages, 13 figures, accepted by IEEE Internet of Things Journal

The application of intelligent reflecting surfaces (IRSs) to suppress interference in wireless communication systems has recently attracted significant research attention. Most existing approaches rely on complete or partial channel state information (CSI) to configure the IRS. However, acquiring accurate CSI in IRS-assisted systems involves considerable pilot overhead and introduces non-negligible delays. This issue is further exacerbated under strong interference conditions, where interfering sources are typically non-cooperative, making CSI acquisition even more challenging. As a result, existing CSI-dependent interference suppression methods become difficult to deploy in practice. To address these limitations, we propose a novel blind interference suppression strategy that combines a proportional phase-inversion (PPI) algorithm with the conditional sample mean (CSM) method. The proposed approach determines the IRS configuration using only the received signal power, without requiring any prior CSI. We conduct a comprehensive performance evaluation by deriving the theoretical performance of the proposed scheme, which is subsequently verified through numerical simulations. Furthermore, simulation results across various parameter settings demonstrate that the proposed blind interference suppression scheme reduces the interference power to the level of noise, thereby achieving a marked signal-to-interference-plus-noise ratio (SINR) improvement and outperforms existing benchmark schemes.

0.73

Sensing-Based Communication: A Non-Orthogonal Passive Reflection Framework for ISAC

cs.IT eess.SPeess.SY ·2026-11-06 ·Xin Xiong, Mathew Salas, Sihua Shao, Chen Chen, Mostafa Hassanalian +1 more
similarity 0.60
Abstract

While integrating uplink without disrupting the primary downlink remains a critical challenge for existing reflective communication systems, this paper proposes a non-orthogonal passive integrated sensing and communication (ISAC) mechanism termed Sensing-based Communication. Originating from and validated within an optical retro-reflective system, this mechanism possesses an underlying wave-agnostic architecture with the potential to be generalized across other physical modalities. It leverages incident downlink signals for parasitic modulation via passive tags. By relying solely on fundamental on-off keying (OOK) reflection, the tag unifies the reflective sensing channel and the uplink communication channel, and simultaneously achieves both sensing and duplex communication. Consequently, our approach introduces uplink capability without sacrificing the downlink data rate or consuming additional spectrum resources. At the receiver, we design a joint decoding architecture combining cross-correlation computation and successive interference cancelation (SIC) to fully exploit the degrees of freedom in broadband signals for multi-user interference suppression. We derive closed-form expressions for the interference and bit error rate (BER) assuming zero-mean Gaussian signals. Using an experimental testbed, we validate the pivotal theoretical finding, the scaling relationship of SINR with signal bandwidth and cross-correlation time--where linear regression yields a strong goodness-of-fit with $R^2 = 0.9688$. Furthermore, evaluations under noise-like orthogonal frequency division multiplexing (OFDM) waveforms exhibit high consistency between theoretical derivations and simulation data ($R^2 = 0.9372$, mean absolute percentage error, $\text{MAPE} = 14\%$), confirming the model's accuracy and waveform generalizability.

0.23

Leveraging Movable-Element STARS for RSMA-SWIPT Under Practical System Imperfections

eess.SP ·2026-09-24 ·Muhammad Asif, Asim Ihsan, Irfan Muhammad, Zhu Shoujin, Mikael Gidlund +1 more
benchmark similarity 0.59
Abstract · 14 pages, 9 figures

We study a robust multiuser framework for simultaneous wireless information and power transfer (SWIPT), where rate-splitting multiple access (RSMA) is integrated with a movable-element simultaneously transmitting and reflecting surface (ME-STARS). By allowing the STARS elements to change their positions in addition to controlling the reflection and transmission coefficients, the proposed architecture provides additional spatial flexibility for improving the cascaded channels toward users in both regions. Meanwhile, RSMA is employed to manage multiuser interference, while power-splitting receivers enable simultaneous information decoding and energy harvesting. The system design further accounts for channel state information (CSI) uncertainty, residual transceiver hardware impairments (HIs), and the nonlinear characteristics of practical energy-harvesting circuits. Accordingly, a robust sum-rate maximization problem is formulated by jointly designing the BS precoders, common-rate allocation, ME-STARS reflection/transmission coefficients, power-splitting (PS) ratios, and movable-element positions. The resulting formulation is highly non-convex because the movable-element positions affect the cascaded channels non-linearly and are tightly coupled with the remaining design variables. To obtain a tractable solution, the joint design is decomposed into active beamforming, passive beamforming, movable-element positioning, and PS-ratio optimization blocks, which are updated iteratively through suitable convex reformulations. Numerical results show that the proposed framework delivers higher sum rates than the considered benchmark schemes, exhibits robust behavior under CSI uncertainty and residual HIs, and achieves stable convergence across the considered system configurations.

0.16