CS Paper Radar

Energy Efficiency Maximization for FAS-Assisted Downlink Communication in Mobile Embodied AI Networks (MEAN) over Interference Channels

Ruopeng Xu, Zhaohui Yang, Jiaxiang Wang, Chenliang Wu, Zhaoyang Zhang

eess.SP ·submitted 2026-08-13 05:44 UTC · v1
benchmark

Abstract

In this paper, we investigate a fluid antenna system (FAS)-assisted downlink mobile embodied AI network (MEAN) over interference channels, where multiple base station (BS)-agent pairs reuse the same spectrum. The BSs employ FASs to improve the communication quality, while the mobile embodied artificial intelligence (AI) agents can adjust their positions according to environment-aware channel information, such as a channel-to-interference-plus-noise map (CINM). Considering both co-channel interference and the energy consumption caused by communication and agent movement, we formulate an energy efficiency (EE) maximization problem by jointly optimizing the agent positions, FAS port selections, and transmit powers. To solve this mixed-integer non-convex problem, we first derive the optimal transmit power in closed form for given agent positions and FAS ports. We then develop an iterative algorithm with adaptive FAS-port optimization and sequential agent-position optimization, together with a low-complexity power-update method. Simulation results demonstrate that the proposed design outperforms the considered benchmark schemes and provides improved feasibility under severe noise conditions.

Closest papers

Nearest neighbours by meaning across the whole index.

Joint Movement and Compression Ratio Design for Mobile Embodied AI Networks (MEAN)

cs.IT cs.LG ·2026-10-01 ·Yahao Ding, Jiaxiang Wang, Zhouxiang Zhao, Zhaohui Yang, Mingzhe Chen +1 more
similarity 0.70
Abstract · 6 pages, 4 figures, conference

Mobile embodied AI networks (MEAN) enable embodied agents to perceive, reason, communicate, and act in wireless environments. In such networks, agent mobility can improve channel conditions, while semantic compression can reduce transmission payloads. However, movement consumes energy, and stronger compression incurs additional computational cost. This paper studies joint movement, semantic compression, and transmit power design for an uplink MEAN system. We formulate a max-min energy efficiency (EE) problem by jointly optimizing transmit power, movement distance, and semantic compression ratio under controllable power constraints. The problem is non-convex due to the coupled signal-to-interference-plus-noise ratio (SINR), mobility-dependent channel gains, and fractional EE objective. To solve it, we propose an alternating optimization (AO)-Dinkelbach algorithm, where the fractional objective is handled by the Dinkelbach transformation, transmit power is updated via successive convex approximation (SCA), and movement distance is updated by coordinate-wise grid search. Simulation results show that the proposed scheme outperforms no-mobility and no-compression baselines, demonstrating the benefit of jointly exploiting mobility control, semantic compression, and power allocation in MEAN.

0.20

Joint Transmit Power and Reflection Coefficient Optimization for Underlay Cognitive Radio Ambient Backscatter Communication

eess.SP ·2026-10-31 ·Chabalala S. Chabalala, Peter Odero Akuon, Zhen Gao
theory similarity 0.61
Abstract · Ambient backscatter communication (AmBC), cognitive radio networks (CRNs), interference management, outage performance, power reflection coe…

The integration of cognitive radio (CR) technology with backscatter communication offers a promising solution for developing spectrum-efficient and low-power wireless networks. In this paper, we investigate the performance of an underlay cognitive radio ambient backscatter communication (CR-AmBC) system operating under primary network (PN) interference constraints. The objective is to maximize the performance of the CR-AmBC system while protecting the PN from interference. Differing from prior work, our formulation jointly accounts for: (i) interference from the PN on the CR receivers, (ii) interference from the backscatter device (BD) on the PN receiver, and (iii) imperfect successive interference cancellation (i-SIC) at the secondary destination. We propose a joint transmit power and reflection coefficient optimization framework that incorporates the minimum data rate requirements, the PN interference constraint, and i-SIC for decoding the BD signal. The nonconvex problem is decomposed into two subproblems solved via alternating optimization: (a) a closed-form expression for the feasible transmit power given a fixed reflection coefficient, and (b) an efficient one-dimensional search for the reflection coefficient. We prove that the power update is optimal, reducing the joint problem to a one-dimensional search, with monotone convergence and $\mathcal{O}(KN_β)$ complexity for $K$ iterations and $N_β$ search points. We present a comprehensive simulation-based performance evaluation and the results demonstrate that the proposed joint transmission power and reflection coefficient optimization provides an effective strategy to maximize the performance of the CR-AmBC system without violating the PN protection constraints.

0.07

Analog RF Computing for Integrated Data and AI Flows Over Wireless Networks

cs.IT cs.ETcs.LGeess.SP ·2026-10-14 ·Wentao Yu, Vincent W. S. Wong
published similarity 0.59
Abstract · We take a step toward wireless networks that can compute as well as communicate, using analog RF computing to deliver AI inference to resour…

Many resource-constrained edge devices require artificial intelligence (AI) services but are not powerful enough to store or execute neural networks (NNs). Analog radio frequency (RF) computing addresses this limitation by letting a base station (BS) multicast a waveform encoding NN weights to different clients. Each client then multiplies the received weight-encoded waveform with its locally generated input-encoded waveform through a passive mixer in its RF frontend, thereby realizing the matrix-vector multiplications (MVMs) needed for AI inference with an extremely low power and memory requirement. This can enable telecom operators to provide AI inference services to the edge devices connected to their networks. In practice, however, this multicast AI flow must share the spectrum, power, and spatial resources with other data flows. This paper considers a multi-user multiple-input multiple-output (MU-MIMO) downlink scenario and studies the resulting relative aggregate data rate reduction from integrating the multicast AI flow with the unicast data flows. We formulate a joint beamforming problem for the data and AI flows to maximize the aggregate data rate subject to computing accuracy, client energy, total power, and hardware-related constraints. We develop a weighted minimum mean-square error (WMMSE)-based algorithm to solve the problem. Numerical results based on 3rd Generation Partnership Project (3GPP) channels show that the relative aggregate data rate reduction from integrating an AI flow with data flows is below 5% in representative settings. This indicates that telecom operators can use analog RF computing to provide edge AI services while providing data communication services simultaneously.

0.55

Fluid Antenna Multiple Access for Noise Modulation

cs.IT ·2026-08-31 ·Hadi Zayyani, Felipe A. P. de Figueiredo
benchmark similarity 0.58
Abstract

Noise modulation (NoiseMod) encodes information in the variance of a noise-like waveform. Its noncoherent structure enables low-complexity links, but co-channel users are challenging because interference affects the same variance statistic used for detection. We study fluid antenna multiple access (FAMA) for two-level NoiseMod with independent random bits from each interferer, producing two possible nonzero interference variances. We adopt exact finite-sample maximum-likelihood energy detection from prior NoiseMod/TNM work. We derive the exact single-port moment-generating function and moments of the random-bit aggregate interference, including heterogeneous user powers, and prove that the port minimizing conditional BEP is $\arg\max_k H_k/(σ_w^2+J_k)$, where $H_k$ is desired-link power and $J_k$ is instantaneous bit-state-aware interference variance. For independent fading ports, the common interferer-bit vector couples per-port decision metrics; conditioning on the number of high-state interferers yields an exact binomial-mixture order-statistic representation and avoids the generally invalid rule $F_{Z_{\max}}=F_Z^{N_p}$. For spatially correlated operation, an integer-$μ$ $κ$-$μ$ benchmark uses full pairwise Jakes correlation in scattered fields, with channel-averaged BEP evaluated by conditional Monte Carlo. A standard-error-aware load study shows increased admissible co-channel users as spatial degrees of freedom grow. Finally, a finite-sample variance-domain sensing diagnostic quantifies the oracle gap under frozen channels and interferer states, providing a lower-bound warning on fast-FAMA sensing difficulty rather than a deployable acquisition protocol.

0.06

Learning to Maximize Energy Efficiency in 6G in-X Subnetworks

eess.SP cs.NI ·2026-09-21 ·Ramoni Adeogun
published similarity 0.58
Abstract · Accepted in IEEE VTC Fall 2026

This paper investigates energy-efficient power control in 6G in-X subnetworks. We consider a graph neural network (GNN) framework that captures inter-subnetwork interference and the underlying wireless topology to optimize transmit powers. Three energy efficiency (EE) formulations are studied: (i) network-centric, which maximizes total network energy efficiency; (ii) subnetwork-centric, which maximizes the average energy efficiency per subnetwork; and (iii) a multi-objective approach, which balances energy efficiency and sum-rate performance. Extensive simulations in industrial factory settings with 3GPP channel models demonstrate that the GNN effectively learns interference-aware power allocation policies, significantly outperforming maximum power transmission and existing GNN based power control solution. Results showed network EE gains of up to 1341%, average per-device EE improvements of up to 1302%, and sum-rate enhancements up to 24.7% relative to a maximum transmit power policy, depending on the chosen optimization formulation and trade-off settings.

0.29

Hardware Impairment Parameter Estimation in Fluid Antenna Systems by Inverse Optimization

eess.SP ·2026-11-17 ·Songling Zhang, Zhaohui Yang, Ruopeng Xu, Hao Xu, Xusheng Zhu +2 more
published similarity 0.58
Abstract · Accepted by IEEE GLOBECOM 2026

In this paper, the problem of estimating the hardware impairment parameters of fluid antennas (FAs) in a multi-base station (BS) multi-user communication system is studied. The actual hardware coefficients are unknown, whereas the FA positions and transmit beamforming vectors adopted by the BSs are known. We first formulate a forward spectral efficiency (SE) maximization problem and introduce aggregate interference variables whose consistency with the physical inter-cell interference can be maintained through a pricing mechanism. For inverse estimation, the aggregate interference is obtained from receiver-side interference measurements associated with the observed network decisions. We then construct a trust-region linear model of the position-update problem around the observed FA positions. To extend the applicability of the proposed framework to antenna positions obtained from inexact or heuristic algorithms, we develop an inverse optimization model with an explicit duality-gap tolerance, which is solved using sequential quadratic programming (SQP). Simulation results show that the proposed scheme attains a lower estimation error than KKT residual minimization (KKT-RM) at both considered transmit-power levels and improves the SE by up to 22.86% over the Ideal-hardware-assumption scheme.

0.45

Fundamentals of Energy-Efficient Hardware Configurations for Wireless Links with Sleep Modes

cs.IT ·2026-09-10 ·Anders Enqvist, Özlem Tuğfe Demir, Cicek Cavdar, Emil Björnson
published similarity 0.58
Abstract · 13 pages, 8 figures. A preliminary version was presented at IEEE VTC2024-Spring

In this paper, we examine the energy efficiency (EE) of a base station (BS) with multiple antennas. We use a state-of-the-art power consumption (PC) model that captures the passive and active parts of the transceiver circuitry, including the effects of radiated power, signal processing, and passive consumption. The paper treats the transmit power, bandwidth, and number of antennas as the optimization variables. We provide novel closed-form solutions for the optimal ratios of power per unit bandwidth and power per transmit antenna, and discover a new relationship in which the radiated power equals the total transceiver power at the EE-optimal operating point. A central finding is that the EE-optimal signal-to-noise ratio (SNR) collapses to a universal numerical constant of approximately 5.93 dB, independent of channel and hardware parameters. We present an algorithm that jointly optimizes the three design variables to achieve maximum EE under practical constraints, and provide analytical insight into whether maximum power or maximum bandwidth is optimal and how many antennas a BS should utilize. We further extend the optimization framework to incorporate quality-of-service (QoS) requirements and three advanced sleep modes of varying depth: absolute sleep, deep sleep, and idle mode. We characterize the optimal hardware configuration for each mode and determine when the rush-to-sleep strategy, which transmits briefly at the EE-optimal active configuration and sleeps the rest of the time, is optimal. Incorporating wake-up transition delays, we reveal how latency constraints and sleep-mode-specific transition times jointly dictate the optimal sleep mode for data packets with absolute deadlines. Together, these results indicate that energy-efficient operation requires treating transmission and sleep as a single coupled optimization.

0.58

Multi-User Precoding with Stacked Intelligent Metasurfaces via Neural Reparameterization

eess.SP ·2026-11-02 ·Yongqiang Zhang, Qurrat-Ul-Ain Nadeem
similarity 0.56
Abstract · 15 pages, 9 figures, Submitted to an IEEE journal for publication

Stacked intelligent metasurfaces (SIMs) enable wave-domain signal processing, and provide a promising architecture for enhancing spectral efficiency in multi-user wireless communication systems. However, jointly optimizing transmit power and multi-layer phase shifts in SIM-assisted wireless systems under quality-of-service (QoS) constraints results in a large-scale nonconvex problem, for which conventional numerical optimization-based methods, such as alternating optimization (AO), suffer from high computational burden and limited scalability. In this paper, we develop a QoS constraint-aware neural reparameterization framework for SIM-assisted downlink precoding. By embedding the cascaded wave-propagation structure of the SIM into a model-based differentiable architecture, both the phase shift configuration and transmit power allocation are reparameterized as parameters of a structured neural model that inherently satisfies feasibility constraints of the original problem. The resulting formulation enables efficient optimization that does not rely on a channel-to-precoding mapping learned through offline training. Instead, it directly updates the reparameterized optimization variables to realize real-time precoding for any channel realization. Simulation results demonstrate that the proposed method achieves superior sum rate performance under QoS constraints, while significantly improving computational efficiency compared with conventional numerical optimization approaches.

0.19