CS Paper Radar

Fundamentals of Energy-Efficient Hardware Configurations for Wireless Links with Sleep Modes

Anders Enqvist, Özlem Tuğfe Demir, Cicek Cavdar, Emil Björnson

cs.IT ·submitted 2026-09-10 12:40 UTC · v1
published

Abstract

In this paper, we examine the energy efficiency (EE) of a base station (BS) with multiple antennas. We use a state-of-the-art power consumption (PC) model that captures the passive and active parts of the transceiver circuitry, including the effects of radiated power, signal processing, and passive consumption. The paper treats the transmit power, bandwidth, and number of antennas as the optimization variables. We provide novel closed-form solutions for the optimal ratios of power per unit bandwidth and power per transmit antenna, and discover a new relationship in which the radiated power equals the total transceiver power at the EE-optimal operating point. A central finding is that the EE-optimal signal-to-noise ratio (SNR) collapses to a universal numerical constant of approximately 5.93 dB, independent of channel and hardware parameters. We present an algorithm that jointly optimizes the three design variables to achieve maximum EE under practical constraints, and provide analytical insight into whether maximum power or maximum bandwidth is optimal and how many antennas a BS should utilize. We further extend the optimization framework to incorporate quality-of-service (QoS) requirements and three advanced sleep modes of varying depth: absolute sleep, deep sleep, and idle mode. We characterize the optimal hardware configuration for each mode and determine when the rush-to-sleep strategy, which transmits briefly at the EE-optimal active configuration and sleeps the rest of the time, is optimal. Incorporating wake-up transition delays, we reveal how latency constraints and sleep-mode-specific transition times jointly dictate the optimal sleep mode for data packets with absolute deadlines. Together, these results indicate that energy-efficient operation requires treating transmission and sleep as a single coupled optimization.

Comment
13 pages, 8 figures. A preliminary version was presented at IEEE VTC2024-Spring

Closest papers

Nearest neighbours by meaning across the whole index.

Energy Efficiency Optimization for 5G NR PDSCH: A Cross-Layer Link Abstraction Framework

eess.SP ·2026-10-04 ·Jaebum Park, Chan-Byoung Chae, Robert W. Heath
similarity 0.63
Abstract · 6 pages, 4 figures

Energy efficiency (EE) optimization for cellular links often assumes Shannon-capacity transmission. The 3GPP New Radio (NR) physical downlink shared channel (PDSCH), however, delivers a transport block whose size is fixed by the modulation and coding scheme (MCS), the rank, and the resource allocation chosen by the scheduler. The transport block must also meet a target block error rate (BLER). In this paper, we optimize EE for the NR PDSCH with the standard transport block size as the throughput and the target BLER as the constraint. Exponential effective signal-to-noise ratio (SNR) mapping (EESM) turns the BLER constraint into a convex per-subcarrier power constraint. We derive a closed-form waterfilling-like power allocation and an EE-maximizing MCS selection rule. With a single calibration parameter per MCS, fitted offline over 3GPP tapped delay line C (TDL-C) channels, EESM predicts the BLER without per-realization link-level simulation. Numerical results show that a Shannon-capacity baseline overestimates the EE of equal-power transmission by 1.5 to 1.7 times at high SNR within the transmit power budget.

0.26

A LoRa-Compatible Receiver with Programmable Noise-Power Trade-Off and Integrated Wake-Up Mode

cs.AR ·2026-10-14 ·Marco Gonzalez, Pol Maistriaux, Jérôme Louveaux, David Bol
similarity 0.60
Abstract · 13 pages, 19 figures, removed mentions to IEEE

Programmable receivers allow an optimal performance in the variable conditions of the wireless channel. An extensive analysis of their noise-power trade-off enables the development of a main receiver with embedded wake-up circuitry. This makes the seamless integration of wake-up receivers (WuRXs) in RF receivers possible, avoiding power, area, complexity, and cost overheads in the system. In this paper, we propose the first LoRa-compatible receiver with an integrated wake-up mode and a programmable noise-power trade-off. In main-receiver mode, it consumes 4.57 mW for a sensitivity of -138 dBm, but it can save up to 62.6% of power consumption at the cost of an 8.3-dB sensitivity degradation. In wake-up mode, sensitivity down to -126 dBm is achieved for a 32-ms latency and 1.5 mW of power consumption. The power consumption remains relatively high due to a sub-optimal design of the the phase-locked loop (PLL). In the end, the wake-up mode consumes 3X less than the lowest-noise configuration in main-receiver mode.

0.28

Age of Information for Power-Saving Devices with DRX Mechanism

cs.NI cs.PF ·2026-11-06 ·Hung-Chun Lin, Kuang-Hsun Lin, Hung-Yu Wei
publishedtheoryhighly cited similarity 0.59
Abstract · 6 pages, 4 figures, 1 table. Published in IEEE ICC 2023

Reducing the power consumption of User Equipment (UE) has always been a crucial issue in communication systems. As a result, Discontinuous reception (DRX) is introduced in today's New Radio (NR) networks as a power-saving strategy. In addition, the variety of low latency applications in 6G makes the issue of maintaining data freshness increasingly important. This paper aims to study the relationship between freshness and power-saving. To capture the information freshness, we use Age of Information (AoI) as the performance metric. To our best knowledge, unlike previous studies focusing on power saving and delay trade-offs, this is the first study considering the impact of DRX on AoI. We solve the closed-form solution of the peak average AoI with the DRX mechanism. Moreover, we propose a parameters adjustment strategy. Based on the simulation validation, our proposed strategy can enable the UE to keep the AoI close to the theoretical lower bound AoI while achieving high power-saving efficiency.

0.64

Minimizing Energy Consumption based on Waste Factor in Multi-user Multi-relay Systems

eess.SP ·2026-10-03 ·Nurullah Sevim, Mostafa Ibrahim, Sabit Ekin, Theodore S. Rappaport
similarity 0.59
Abstract · Submitted to IEEE Transactions on Green Communications and Networking for review

The escalating energy demands of modern wireless networks make energy-efficient system design a central challenge for future 6G deployments. Relay-assisted communication has long been recognized as a powerful tool for improving coverage and throughput, tracing its roots to early repeater communication systems and the foundational relay channel models in information theory. Meanwhile, modern relay selection and routing strategies are primarily driven by rate-based or transmit-power-centric metrics, which often neglect hardware-level losses that is independent of the transmitted signal. As networks grow denser and more heterogeneous, signal-independent hardware inefficiencies and circuit power consumption increasingly dominate the total energy consumption and fundamentally alter the optimality of relay assignment decisions. To address the challenge of modeling signal-independent power consumption in relay-assisted systems, the Waste Factor (WF) framework is adopted: a hardware-aware, unifying metric that explicitly captures signal-independent power losses across cascaded transceivers and wireless channels. Using WF, the energy consumption of multi-user, multi-relay wireless systems is quantified and minimized under practical hardware and network constraints. The formulation jointly accounts for component inefficiencies, propagation losses, and relay-selection constraints. The proposed framework demonstrates that the WF formulation provides a fundamentally new way to model relay-assisted communication, enabling hardware-aware energy-per-bit minimization and a structured representation that enables computationally efficient analysis. Simulation results confirm that WF-based relay assignment reduces total energy per bit while improving the ability of users to satisfy minimum received-power requirements, outperforming conventional formulations across both metrics.

0.26

Channel-Chart-Driven Antenna Activation for Energy-Efficient Cell-Free Massive MIMO

eess.SP ·2026-11-12 ·Yara Kafa, Luc Le Magoarou, Joumana Farah, Matthieu Crussi{è}re
published similarity 0.59
Abstract

Cell-free massive MIMO (CF-mMIMO) can provide uniformly high system performance across the coverage area through distributed cooperation. However, keeping all antennas active leads to high circuit and fronthaul power consumption. This paper studies energy-efficient uplink reception through antenna activation, where only a subset of distributed antennas is selected to serve the users. To enable network-wide activation with low signaling overhead, each access point (AP) maps its locally estimated channel state information (CSI) into a lowdimensional channel-chart (CC) embedding and forwards this representation to the central processing unit (CPU) instead of the full CSI. Based on the received embeddings, we formulate a binary antenna-activation problem for network EE maximization and propose three low-overhead strategies: (i) direct embeddingdomain activation using a proxy EE metric without CSI reconstruction, (ii) nearest chart-point CSI approximation, which estimates CSI from a reference chart database for greedy EE optimization, and (iii) decoder-based CSI reconstruction using a pre-trained autoencoder. The proposed approaches further enable a systematic comparison of antenna activation techniques in terms of achieved performance, computational complexity, and signaling overhead. Numerical results show substantial EE gains over the all-active baseline, with only a minor degradation in sum spectral efficiency and a significant reduction in signaling overhead. Moreover, the proposed greedy framework achieves EE performance close to that of the simulated annealing baseline, confirming its effectiveness for low-complexity antenna activation.

0.29

Age-Optimal Target Wake Time: Provably Good Wake Schedules for Energy-Constrained Wi-Fi Status Updating

cs.NI cs.IT ·2026-08-21 ·Haoyu Wang, Bo Sheng, Xiaoqian Zhang
publishedtheorycode/data similarity 0.59
Abstract · 11 pages, IEEE conference format; extended version (full proofs in the appendix) of a paper accepted at MSWiM 2026, Paris. This version adds…

Target Wake Time (TWT), introduced in IEEE 802.11ax, lets an access point schedule exactly when each station wakes, transmits, and dozes. Existing TWT schedulers optimize energy or throughput, treating information freshness at best as a constraint and offering no performance guarantees. We design the wake schedule itself for freshness: minimize the weighted average Age of Information (AoI) over stations subject to per-station energy budgets, where the decision variables are the TWT triples (wake interval, offset, service period duration). We derive a renewal-exact AoI model for TWT under per-SP block fading and validate it against packet-level 802.11ax simulation with ~1% mean error. We show that, unlike preemptive scheduling, non-preemptive TWT packing can be infeasible at schedule density 1, and identify the granularity condition under which a small-first best-fit packer provably succeeds. Around this we build Harmonic-Greedy, a scheduler combining a convex relaxation, anchor-optimized power-of-two rounding, and a best-of-uniform safeguard, and prove it is a constant-factor approximation: 4/ln 2 ~= 5.77 under a mild granularity assumption and 6/ln 2 ~= 8.66 unconditionally. We implement the complete system in ns-3 -- a TWT wake/doze mechanism integrated with the power-save architecture, plus the scheduler -- and show that it is the only scheduler that stays near a relaxation lower bound across all regimes: against a strong energy-greedy baseline it ties when per-station energy floors already pin the periods, and wins by 4-36% exactly where the schedule density is binding and must be redistributed by AoI weight or channel quality rather than by energy budget -- the regime our analysis identifies.

0.56

Active STAR-RIS-Aided RSMA IoT Systems: Performance Analysis, Model-Based and Data-Driven Resource Allocation Frameworks

eess.SP ·2026-09-06 ·Ngo Hoang Tu, Vo Nguyen Quoc Bao, Tran Thien Thanh
published similarity 0.58
Abstract · This work has been accepted for publication in IEEE Internet of Things Journal

STAR-RISs have emerged as a promising technology for achieving full-space signal coverage with low hardware complexity and energy consumption. In parallel, RSMA offers a flexible interference management mechanism that enhances spectral efficiency and user fairness. Integrating STAR-RIS with RSMA provides strong potential for robust and energy-efficient communications; however, the resulting double-fading cascaded channels and the inherent imbalance between near and far users pose reliability and fairness challenges. This study presents comprehensive information-theoretic and optimization frameworks for active STAR-RIS-assisted RSMA Internet-of-Things systems. Closed-form expressions for the OP and EC are derived under both the presence and absence of direct links. Based on these results, asymptotic OP and EC, diversity order, and array gain are analyzed to characterize system behavior. In addition, throughput-based and spectral-based energy efficiency metrics are investigated to quantify the tradeoffs between transmission performance and power consumption. To enhance user fairness, a fairness-oriented RA framework is developed to jointly optimize power allocation and rate-splitting coefficients using successive convex approximation and block coordinate descent techniques. To further improve scalability and real-time applicability, we introduce a data-driven RA framework based on DMNN, CMNN, and MXGB. This framework approximates the optimization-based solutions with substantially reduced computational complexity. Numerical results show that the proposed MXGB model achieves the shortest execution time while maintaining performance comparable to ground-truth-based benchmarks. Extensive Monte Carlo simulations validate the analytical results and demonstrate the effectiveness of the proposed frameworks.

0.32

Energy Efficiency Maximization for FAS-Assisted Downlink Communication in Mobile Embodied AI Networks (MEAN) over Interference Channels

eess.SP ·2026-08-13 ·Ruopeng Xu, Zhaohui Yang, Jiaxiang Wang, Chenliang Wu, Zhaoyang Zhang
benchmark similarity 0.58
Abstract

In this paper, we investigate a fluid antenna system (FAS)-assisted downlink mobile embodied AI network (MEAN) over interference channels, where multiple base station (BS)-agent pairs reuse the same spectrum. The BSs employ FASs to improve the communication quality, while the mobile embodied artificial intelligence (AI) agents can adjust their positions according to environment-aware channel information, such as a channel-to-interference-plus-noise map (CINM). Considering both co-channel interference and the energy consumption caused by communication and agent movement, we formulate an energy efficiency (EE) maximization problem by jointly optimizing the agent positions, FAS port selections, and transmit powers. To solve this mixed-integer non-convex problem, we first derive the optimal transmit power in closed form for given agent positions and FAS ports. We then develop an iterative algorithm with adaptive FAS-port optimization and sequential agent-position optimization, together with a low-complexity power-update method. Simulation results demonstrate that the proposed design outperforms the considered benchmark schemes and provides improved feasibility under severe noise conditions.

0.04