CS Paper Radar

Energy Efficiency Optimization for 5G NR PDSCH: A Cross-Layer Link Abstraction Framework

Jaebum Park, Chan-Byoung Chae, Robert W. Heath

eess.SP ·submitted 2026-10-04 17:20 UTC · v1

Abstract

Energy efficiency (EE) optimization for cellular links often assumes Shannon-capacity transmission. The 3GPP New Radio (NR) physical downlink shared channel (PDSCH), however, delivers a transport block whose size is fixed by the modulation and coding scheme (MCS), the rank, and the resource allocation chosen by the scheduler. The transport block must also meet a target block error rate (BLER). In this paper, we optimize EE for the NR PDSCH with the standard transport block size as the throughput and the target BLER as the constraint. Exponential effective signal-to-noise ratio (SNR) mapping (EESM) turns the BLER constraint into a convex per-subcarrier power constraint. We derive a closed-form waterfilling-like power allocation and an EE-maximizing MCS selection rule. With a single calibration parameter per MCS, fitted offline over 3GPP tapped delay line C (TDL-C) channels, EESM predicts the BLER without per-realization link-level simulation. Numerical results show that a Shannon-capacity baseline overestimates the EE of equal-power transmission by 1.5 to 1.7 times at high SNR within the transmit power budget.

Comment
6 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Joint Subcarrier and Power Allocation for Multi-User OFDM ISAC Systems

eess.SP ·2026-11-01 ·Jiayue Huang, Ning Wei, Min Qiu, Aimin Tang
theory similarity 0.63
Abstract

Integrated sensing and communication (ISAC) is envisioned as a key enabling technology for 6G networks. Efficient resource sharing between communication and sensing is a fundamental challenge in orthogonal frequency-division multiplexing (OFDM) ISAC systems, particularly in multi-user scenarios, where channel diversity can be exploited to improve resource utilization. This paper investigates joint subcarrier assignment and power allocation for a downlink multi-user OFDM ISAC system, with the objective of minimizing the delay Cramér-Rao lower bound (CRLB) subject to constraints on the normalized integrated sidelobe level (ISL) over the region of interest (RoI), per-user data rates, and total transmit power. We first derive a convex formulation for sensing power allocation given fixed subcarrier assignments, and then develop an equivalent mixed-integer conic formulation of the joint optimization problem. To obtain computationally tractable solutions, we propose a conic relaxation-guided fix-and-optimize (CRG-FO) algorithm that integrates continuous relaxation, power re-optimization under fixed subcarrier assignments, and restricted neighborhood search. Simulation results demonstrate that joint subcarrier and power allocation reduces the distance CRLB relative to uniform subcarrier and power allocation across the tested ISL thresholds, rate loads, and user configurations. Power optimization on uniform sensing supports captures most of this gain, while adaptive subcarrier assignment provides only modest additional improvement.

0.14

Fundamentals of Energy-Efficient Hardware Configurations for Wireless Links with Sleep Modes

cs.IT ·2026-09-10 ·Anders Enqvist, Özlem Tuğfe Demir, Cicek Cavdar, Emil Björnson
published similarity 0.63
Abstract · 13 pages, 8 figures. A preliminary version was presented at IEEE VTC2024-Spring

In this paper, we examine the energy efficiency (EE) of a base station (BS) with multiple antennas. We use a state-of-the-art power consumption (PC) model that captures the passive and active parts of the transceiver circuitry, including the effects of radiated power, signal processing, and passive consumption. The paper treats the transmit power, bandwidth, and number of antennas as the optimization variables. We provide novel closed-form solutions for the optimal ratios of power per unit bandwidth and power per transmit antenna, and discover a new relationship in which the radiated power equals the total transceiver power at the EE-optimal operating point. A central finding is that the EE-optimal signal-to-noise ratio (SNR) collapses to a universal numerical constant of approximately 5.93 dB, independent of channel and hardware parameters. We present an algorithm that jointly optimizes the three design variables to achieve maximum EE under practical constraints, and provide analytical insight into whether maximum power or maximum bandwidth is optimal and how many antennas a BS should utilize. We further extend the optimization framework to incorporate quality-of-service (QoS) requirements and three advanced sleep modes of varying depth: absolute sleep, deep sleep, and idle mode. We characterize the optimal hardware configuration for each mode and determine when the rush-to-sleep strategy, which transmits briefly at the EE-optimal active configuration and sleeps the rest of the time, is optimal. Incorporating wake-up transition delays, we reveal how latency constraints and sleep-mode-specific transition times jointly dictate the optimal sleep mode for data packets with absolute deadlines. Together, these results indicate that energy-efficient operation requires treating transmission and sleep as a single coupled optimization.

0.58

Minimizing Energy Consumption based on Waste Factor in Multi-user Multi-relay Systems

eess.SP ·2026-10-03 ·Nurullah Sevim, Mostafa Ibrahim, Sabit Ekin, Theodore S. Rappaport
similarity 0.62
Abstract · Submitted to IEEE Transactions on Green Communications and Networking for review

The escalating energy demands of modern wireless networks make energy-efficient system design a central challenge for future 6G deployments. Relay-assisted communication has long been recognized as a powerful tool for improving coverage and throughput, tracing its roots to early repeater communication systems and the foundational relay channel models in information theory. Meanwhile, modern relay selection and routing strategies are primarily driven by rate-based or transmit-power-centric metrics, which often neglect hardware-level losses that is independent of the transmitted signal. As networks grow denser and more heterogeneous, signal-independent hardware inefficiencies and circuit power consumption increasingly dominate the total energy consumption and fundamentally alter the optimality of relay assignment decisions. To address the challenge of modeling signal-independent power consumption in relay-assisted systems, the Waste Factor (WF) framework is adopted: a hardware-aware, unifying metric that explicitly captures signal-independent power losses across cascaded transceivers and wireless channels. Using WF, the energy consumption of multi-user, multi-relay wireless systems is quantified and minimized under practical hardware and network constraints. The formulation jointly accounts for component inefficiencies, propagation losses, and relay-selection constraints. The proposed framework demonstrates that the WF formulation provides a fundamentally new way to model relay-assisted communication, enabling hardware-aware energy-per-bit minimization and a structured representation that enables computationally efficient analysis. Simulation results confirm that WF-based relay assignment reduces total energy per bit while improving the ability of users to satisfy minimum received-power requirements, outperforming conventional formulations across both metrics.

0.26

Det-5G: Closing the Determinism Gap in 5G-Advanced for Industrial Closed-Loop Control

cs.NI ·2026-09-07 ·Adnan Aijaz
published similarity 0.60
Abstract · Accepted for publication in the IEEE Next Generation Communications (NextGCom) conference 2026

The ultra-reliable low-latency communication (uRLLC) capability of 5G has created significant opportunities for industrial wireless connectivity, yet widespread use of cellular networks for closed-loop control remains challenging. Closed-loop control requires more than low packet latency and high reliability: cyclic command/feedback exchanges must complete within predictable time bounds despite changing channel conditions, recovery transmissions, mobility, and multi-device contention. This paper introduces Deterministic-5G (Det-5G), a unified radio resource allocation framework for industrial closed-loop control. Det-5G treats the complete bidirectional control cycle as the scheduling object and combines coordinated downlink/uplink allocation, adaptive bundled transmissions, group-oriented downlink communication, and optimized multi-user uplink scheduling over 5G air-interface. Its performance is evaluated through a combination of closed-form analysis and Monte Carlo scheduling experiments, with comparisons against conventional dynamic grant-based scheduling, semi-persistent scheduling/configured grant operation, and fixed proactive repetition. The evaluation shows that Det-5G improves predictability of cycle completion, maintains the target reliability under changing link conditions, and scales more effectively to multi-device control than conventional reactive scheduling, while adapting radio resource use instead of continuously provisioning for the worst case as in fixed repetition. These characteristics make cycle-oriented scheduling a pragmatic solution for reducing the determinism gap that limits the use of 5G for closed-loop control in different verticals, especially as it evolves through 5G-Advanced toward 6G.

0.32

Reducing 6G Energy Consumption: TDD-Aligned Drain Voltage Modulation for Power Amplifiers

eess.SP ·2026-10-23 ·Meizhen Zhuo, Gunter Wolff, Stephan ten Brink, Silvio Mandelli
similarity 0.59
Abstract · 6 pages, 5 figures. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after wh…

The Power Amplifier (PA) of a base station operates inefficiently at partial load, where back-off from the peak output power wastes supply headroom. Adapting the PA drain voltage to the instantaneous signal recovers this loss but requires frequent switching, increasing hardware cost. We propose TDD-Aligned Drain Voltage Modulation (TDD-DVM), a drain voltage modulation scheme that instead selects the drain voltage level once per Time-Division Duplex (TDD) period based on the downlink resource load and switches the voltage during the uplink window. This is enabled by the authors' previous work on POLITE link adaptation, which spreads the transmit power over resources left unused at partial load and moves the PA into a regime where a lower drain voltage suffices. In a 3GPP Urban Macro system-level simulation across traffic loads, we compare TDD-DVM against baseline approaches under conventional and POLITE link adaptation. At equal delivered throughput, TDD-DVM with POLITE keeps the packet failure ratio of the full drain voltage while consuming up to 35% less power than it under conventional link adaptation and up to 7% less than it under POLITE, capturing most of the gain of an idealized reference at moderate loads and roughly half at the highest load.

0.25

Tri-Hybrid Cell-Free Massive MIMO Systems

eess.SP ·2026-10-08 ·Janith Dassanayake, Gayan Aruma Baduge
similarity 0.59
Abstract

This paper proposes a tri-hybrid precoder design, cascading digital, analog, and electromagnetic processing layers, for cell-free massive multiple-input multiple-output (CFmMIMO) systems. We jointly optimize the three-layer precoders and access point (AP) transmit power to maximize global energy efficiency (GEE) under per-AP power and fronthaul constraints. To solve this, we develop an alternating optimization algorithm. The first sub-routine maximizes sum spectral efficiency (SE) for precoder design using weighted minimum mean square error, Riemannian manifold optimization, and gradient ascent over Lorentzian phases. The second optimizes power allocation via Dinkelbach's fractional programming and successive convex approximation. Convergence and computational complexity are also analyzed. Simulation results show the proposed design improves GEE by 87% and 11% over fully digital and classical hybrid precoders, respectively, at 20dBm transmit power. Moreover, joint power optimization yields 22% SE and 16% GEE gains over equal-power baselines, while outperforming colocated architectures in SE. Finally, we identify GEE-optimal regimes for AP and RF chain counts, and demonstrate that increasing dynamic metasurface antenna sizes enhances GEE in low-power regimes with negligible active power overhead.

0.23

Latency-Aware Uplink NOMA-MEC with PASS: A Feasibility-First Resource Allocation Framework

cs.IT ·2026-10-13 ·Sepehr Abolhasani, Saba Asaad, S. Mohammad Razavizadeh, Jiguang He
published similarity 0.59
Abstract · 6 pages, Accepted at IEEE GLOBECOM 2026 Workshops (PASS for NGWC)

Meeting hard task-completion deadlines for many simultaneously offloading users is the binding challenge in mobile-edge computing (MEC). As the user count grows, the transmit power required to satisfy every deadline within per-user budgets rises until no feasible allocation exists. We take a \emph{feasibility-first} view of this $K$-user problem in an uplink non-orthogonal multiple access (NOMA) MEC system served by a pinching-antenna system (PASS), whose radiating points establish strong line-of-sight (LoS) links that lower the received-power requirement. We formulate a latency-constrained joint optimization of transmit powers, CPU frequencies, and antenna configuration. We then derive a \emph{closed-form least-power feasibility test}: the componentwise-least allocation meeting every deadline. It certifies feasibility with the largest attainable margin to the power budgets and defines a practical \emph{quality-of-service (QoS)-feasibility outage} metric, the probability that no allocation meets all deadlines within budget. We solve the problem with a three-block alternating-optimization algorithm that is provably monotone-convergent and has polynomial complexity. Numerical results show that the proposed scheme sustains deadline feasibility at user loads where equal-power, orthogonal multiple access (OMA), and single-antenna baselines fail or degrade sharply, each by a mechanism predicted directly from the system model, whereas the proposed design degrades gracefully. Stress tests further show that feasibility is sustained under order-of-magnitude budget reductions, and that the pinching-antenna array itself enables constrained-budget operation. The result is a scalable, closed-form-initialized design for deadline-feasible offloading.

0.40

Linear Coding of LTI Sources Over Vector Gaussian Channels: A Majorization Approach

cs.IT eess.SYmath.OC ·2026-08-30 ·Shihao Jin, Junhui Li, Shinji Hara, Wei Chen
similarity 0.59
Abstract · 16 pages, 7 figures

We study the design of linear time-invariant (LTI) encoder-decoder pairs for transmitting the state of a discrete-time LTI vector source over power-constrained parallel Gaussian channels with feedback. Two types of power constraints are considered. Under individual subchannel power constraints, a necessary and sufficient condition for designing an encoder-decoder pair that achieves bounded estimation error covariance (EEC) is established via two coupled majorization inequalities involving the subchannel signal-to-noise ratios and the antistable poles of the source. Under total channel power constraint, we derive the minimum total power required for a feasible encoder-decoder design by exploiting partial-order progamming under majorization order. An analytical optimal power allocation is obtained for the case of equal noise variances, which admits a water-filling interpretation; for general noise case, a sequential water-filling algorithm is developed. Our results reveal that the difficulty of transmitting a discrete-time LTI source via LTI coding is governed not only by its topological entropy, but also by the evenness of the log-magnitudes of its antistable poles. The design methods for feasible encoder-decoder pairs are also provided.

0.31