CS Paper Radar

Tri-Hybrid Cell-Free Massive MIMO Systems

Janith Dassanayake, Gayan Aruma Baduge

eess.SP ·submitted 2026-10-08 16:45 UTC · v1

Abstract

This paper proposes a tri-hybrid precoder design, cascading digital, analog, and electromagnetic processing layers, for cell-free massive multiple-input multiple-output (CFmMIMO) systems. We jointly optimize the three-layer precoders and access point (AP) transmit power to maximize global energy efficiency (GEE) under per-AP power and fronthaul constraints. To solve this, we develop an alternating optimization algorithm. The first sub-routine maximizes sum spectral efficiency (SE) for precoder design using weighted minimum mean square error, Riemannian manifold optimization, and gradient ascent over Lorentzian phases. The second optimizes power allocation via Dinkelbach's fractional programming and successive convex approximation. Convergence and computational complexity are also analyzed. Simulation results show the proposed design improves GEE by 87% and 11% over fully digital and classical hybrid precoders, respectively, at 20dBm transmit power. Moreover, joint power optimization yields 22% SE and 16% GEE gains over equal-power baselines, while outperforming colocated architectures in SE. Finally, we identify GEE-optimal regimes for AP and RF chain counts, and demonstrate that increasing dynamic metasurface antenna sizes enhances GEE in low-power regimes with negligible active power overhead.

Closest papers

Nearest neighbours by meaning across the whole index.

Hybrid Precoding and Combining for O-RAN Massive MIMO Systems

cs.IT ·2026-11-11 ·Seraphin F. Kimaryo, Jung-Mo Moon, Kyungchun Lee
benchmark similarity 0.64
Abstract · 16 pages, 13 figures

Recently, the radio access network (RAN) has been reimagined through open RAN (O-RAN) architecture to overcome the limitations of the traditional monolithic, black-box design philosophy and to leverage emerging technologies such as cloud computing, machine learning, and artificial intelligence. Although O-RAN disaggregates the base station (BS) into independent components to enable modular deployment, this paradigm introduces new challenges in signal processing and beamforming. In particular, beamforming in O-RAN must account for fronthaul link (FHL) capacity constraints, coordinated operation of multiple radio units (possibly from different vendors), and resource management, including transmit power allocation. To address these challenges, this work proposes novel beamforming techniques for a downlink multiuser hybrid massive multiple-input multiple-output system, in which hybrid architectures are deployed at both the users and at each BS radio unit. We formulate a sum-rate maximization problem incorporating transmit-power, unit-modulus, and FHL capacity constraints. The proposed algorithm integrates gradient descent and the Lagrange multiplier method to design analog beamformers and digital precoders, respectively, whereas digital combiners are designed to render the received streams parallel to each other. By avoiding computationally intensive operations such as eigenvalue and singular value decompositions, the proposed approach, as evidenced by simulation results, achieves superior performance with moderate computational complexity compared to existing benchmark schemes.

0.34

Efficient Alternating Optimization for Hybrid Digital-Wave Beamforming in SIM-Assisted Cell-Free Massive MIMO

eess.SP cs.IT ·2026-08-23 ·Eunhyuk Park, Seok-Hwan Park, Osvaldo Simeone, Marco Di Renzo
published similarity 0.64
Abstract · IEEE PIMRC 2026

Stacked intelligent metasurfaces (SIMs) have recently emerged as a promising architecture for large-scale beamforming systems, including cell-free massive MIMO (CF-mMIMO), due to their cost-effective wave-domain signal processing capabilities. However, existing algorithms for the joint optimization of digital and SIM-enabled wave-domain beamforming typically incur prohibitive computational complexity. In this work, we propose an efficient alternating optimization (AO) algorithm for weighted sum-rate maximization in SIM-assisted CF-mMIMO systems employing hybrid digital-wave beamforming. Unlike prior approaches that rely on general-purpose optimization solvers or per-element gradient ascent methods, the proposed algorithm updates the digital and wave-domain beamforming variables on a per-access point (AP) or per-SIM-layer basis, enabling closed-form updates at each step. Numerical results demonstrate that the proposed algorithm reduces the computational complexity by more than 99\% compared to existing algorithms while achieving nearly identical sum-rate performance.

0.42

Unifying Performance and Equity via Percentile Optimization and Cell-Free Massive MIMO

cs.IT cs.NIeess.SPeess.SY ·2026-10-25 ·Ahmad Khan, Hussein A. Ammar, Raviraj Adve
benchmark similarity 0.64
Abstract

Improving the throughput of the weakest users is a central objective of wireless resource allocation, and the objective around which the user-centric cell-free massive multiple-input multiple-output (UC-mMIMO) architecture is built. This paper brings the two together by formulating and solving percentile programs for UC-mMIMO networks. We maximize the sum-least-qth-percentile (SLqP) rate via downlink power control, a utility that targets the user equipments (UEs) in the lowest q percentile of the rate distribution and subsumes max-min-rate and sum-rate maximization as special cases. The problem is non-convex, non-smooth and NP-hard. The cyclic maximization approach of one of the previous percentile optimization series does not carry over: the coherent joint transmission technique introduces cross terms in the powers that destroy the block-concavity on which it relies. We develop a change of variables that restores block-concavity, yielding an algorithm with closed-form auxiliary updates and a concave power update, and we give a self-contained proof of non-decreasing convergence to a directional stationary point. Simulations establish two facts: first, percentile optimization retains its value in an architecture with no cell edges; relative to the weighted minimum mean-square error benchmark, it raises the average rate of the lowest-10th-percentile UEs by 56--72% and Jain's fairness index from below 0.92 to above 0.99. Second, compared directly with massive MIMO and small cells under the same SLqP utility, UC-mMIMO delivers the highest lower-percentile rates at every access point density tested, by up to 62% and 2.7$\times$ respectively, at the same fairness, and its advantage widens with densification.

0.22

Energy Efficient Multi-User Beamforming and 3D Position Optimization for SIM-Assisted UAVs

eess.SP ·2026-08-13 ·Chandan Kumar Sheemar, Giovanni Iacovelli, Sourabh Solanki, Wali Ullah Khan, George C. Alexandropoulos +1 more
benchmark similarity 0.63
Abstract

This paper studies energy-efficient downlink multi-user transmissions with unmanned aerial vehicle (UAV) communication systems equipped with stacked intelligent metasurfaces (SIM), enabling wave-domain analog beamforming through multiple cascaded metasurface layers, while low-dimensional digital precoding is carried out using a limited number of transmit radio-frequency chains. This architecture enables flexible electromagnetic wave manipulation with reduced hardware complexity, making it particularly suitable for energy-constrained aerial platforms. We formulate a hardware-aware energy-efficiency (EE) maximization problem aiming to jointly optimize the digital precoder, the phase shifts of all SIM layers, and the three-dimensional UAV position under transmit-power, SIM operation, and UAV deployment constraints. The resulting problem is highly non-convex due to the fractional objective, the cascaded SIM structure and the unit-modulus phase constraints of the constituent metasurface layers, as well as the non-linear UAV-dependent channel. To address these challenges, we develop a transform-based alternating optimization framework that combines Dinkelbach's method, dual and quadratic transforms, to enable closed-form digital beamforming, Riemannian manifold optimization for SIM phase shifts, and successive convex approximation (SCA) for UAV positioning. Convergence and complexity analyses are provided to characterize the proposed algorithm. The presented numerical results showcase that the proposed joint design significantly improves EE compared with fully digital and maximum ratio transmission benchmark schemes, while revealing important design trade-offs among transmit power, SIM size, and the number of its constituent stacked layers.

0.40

Energy-Efficient Tri-Hybrid Beamforming with Movable Pattern-Reconfigurable Antennas

eess.SP ·2026-11-02 ·Hong-Bae Jeon, Suhwan Jang, Chan-Byoung Chae
similarity 0.63
Abstract

Conventional hybrid precoding is confined to the digital/analog domains, leaving the spatial and radiation-pattern degrees-of-freedoms (DoFs) largely untapped. To unlock these, we propose a movable pattern-reconfigurable antenna (MPRA) and an energy-efficient tri-hybrid framework that jointly optimizes the precoders, antenna positions, and radiation-pattern states. We develop a hardware-inspired power model capturing the energy and transmission-time costs of antenna reconfiguration. The resulting mixed discrete-continuous fractional problem is solved via an alternating-optimization framework combining fractional programming, Riemannian optimization, and switching-aware pattern optimization. Simulations demonstrate near-exhaustive-search performance and consistent energy-efficiency (EE) gains, validating the complementary benefits of antenna movement, pattern reconfiguration, and tri-hybrid precoding under hardware-inspired power and latency costs.

0.28

Reduced-Complexity WMMSE Approach for Cell-Free Massive MIMO Systems With Finite-Capacity Fronthaul Links

cs.IT eess.SP ·2026-11-11 ·Wonsik Yoo, Hoon Lee, Seok-Hwan Park
similarity 0.63
Abstract

We propose a reduced-complexity weighted minimum mean squared error (R-WMMSE) framework for cell-free massive MIMO (CF-mMIMO) systems with finite-capacity fronthaul links. To maximize the system capacity, we need to jointly design beamforming vectors at distributed access points (APs) and fronthaul quantization noise covariances. Such a task would be addressed using conventional WMMSE algorithms and their variants. However, existing WMMSE-based methods either assume ideal infinite-capacity fronthaul links or incur high computational complexity when jointly optimizing the network-wide beamforming and fronthaul compression variables. To this end, the proposed method jointly optimizes beamforming and fronthaul compression by leveraging a sequential per-AP optimization strategy. Since each subproblem is efficiently solved via Lagrangian duality with closed-form updates, the overall computational complexity can be significantly reduced compared to the conventional WMMSE method. To further reduce hardware cost, we extend the R-WMMSE framework to hybrid analog-digital beamforming systems, tackling the joint design of digital beamforming, fronthaul compression, and analog beamforming. Numerical results show that the proposed scheme achieves performance nearly identical to that of the conventional WMMSE while reducing the runtime by over 99%.

0.24

Energy Efficiency in Microwave Linear Analog Computer (MiLAC)-Enabled Communications

eess.SP ·2026-08-31 ·Ahmed Magbool, Marco Di Renzo
similarity 0.62
Abstract · Submitted to the IEEE for possible publication

Microwave linear analog computers (MiLACs) have emerged as a promising architecture for energy-efficient wireless communications by shifting signal processing from the digital to the analog domain using tunable impedance networks. Several MiLAC architectures have recently been proposed, including the single-layer MiLAC (SLM), two-layer MiLAC (TLM), and hybrid digital-MiLAC (HDM). In this paper, we investigate the energy efficiency (EE) of these architectures. Specifically, we formulate EE maximization problems for the SLM, TLM, and HDM architectures under transmit power, user rate, and architecture-specific constraints, and develop a dimensionality reduction technique with successive convex approximation (SCA)-based algorithms to efficiently solve the resulting non-convex problems. We further derive a computationally efficient solution for EE maximization based on a search over only $(K+1)$ closed-form candidate solutions, where $K$ is the number of users, and analyze the asymptotic EE in the large-antenna regime under negligible quantization noise. Our analysis shows that the EE of the SLM, TLM, and HDM architectures scales as $\ln(N)/N^2$, whereas conventional digital beamforming (DBF) scales as $\ln(N)/N$, where $N$ denotes the number of transmit antennas. Despite these different scaling laws, the faster EE decay of MiLAC-based architectures becomes relevant only at very large antenna dimensions, typically involving thousands of antennas, while they maintain superior EE over practically relevant finite antenna regimes. Finally, we derive an approximation of the number of antennas required to achieve the maximum EE for each architecture and the corresponding EE. Simulation results show that, over practically relevant antenna regimes, MiLAC-based architectures achieve substantially higher EE than conventional fully digital and hybrid analog-digital beamforming.

0.42

Tri-Hybrid SWIPT with Reconfigurable Parasitic Antennas

eess.SP cs.IT ·2026-10-09 ·Thien Duc Hua, Mohammadali Mohammadi, Hien Quoc Ngo, Michail Matthaiou
similarity 0.62
Abstract

We propose a coupling-aware tri-hybrid precoding architecture for simultaneous wireless information and power transfer (SWIPT) using reconfigurable parasitic antennas. By integrating multiport network theory and information theory, we develop a third precoding layer that explicitly accounts for mutual coupling and reactive energy storage within the antenna domain. To efficiently optimize this architecture, we propose a low-complexity tri-hybrid solution comprising coordinate descent (CD) for parasitic reactive load optimization, a singular value decomposition (SVD)-based analog precoder, and a protective partial zero-forcing (PPZF) digital precoder. Numerical results demonstrate that the transmit array introduces impedance mismatch that reduces the real power accepted by the antenna array. Moreover, the proposed tri-hybrid architecture significantly outperforms hybrid precoding by constructively exploiting the coupling effects, yielding substantial gains in spectral efficiency (SE) and sum non-linear harvested energy (NLHE) at a fraction of the hardware cost.

0.35