CS Paper Radar

Efficient Alternating Optimization for Hybrid Digital-Wave Beamforming in SIM-Assisted Cell-Free Massive MIMO

Eunhyuk Park, Seok-Hwan Park, Osvaldo Simeone, Marco Di Renzo

eess.SP cs.IT ·submitted 2026-08-23 00:59 UTC · v1
published

Abstract

Stacked intelligent metasurfaces (SIMs) have recently emerged as a promising architecture for large-scale beamforming systems, including cell-free massive MIMO (CF-mMIMO), due to their cost-effective wave-domain signal processing capabilities. However, existing algorithms for the joint optimization of digital and SIM-enabled wave-domain beamforming typically incur prohibitive computational complexity. In this work, we propose an efficient alternating optimization (AO) algorithm for weighted sum-rate maximization in SIM-assisted CF-mMIMO systems employing hybrid digital-wave beamforming. Unlike prior approaches that rely on general-purpose optimization solvers or per-element gradient ascent methods, the proposed algorithm updates the digital and wave-domain beamforming variables on a per-access point (AP) or per-SIM-layer basis, enabling closed-form updates at each step. Numerical results demonstrate that the proposed algorithm reduces the computational complexity by more than 99\% compared to existing algorithms while achieving nearly identical sum-rate performance.

Comment
IEEE PIMRC 2026

Closest papers

Nearest neighbours by meaning across the whole index.

An Efficient SIM Beamforming Scheme Based on Physical-Empowered Projected Gradient

eess.SP ·2026-10-29 ·Yuzhi Yang, Hao Liu, Tianhao Guo, Jiancheng An, Lu Gan +2 more
similarity 0.75
Abstract · under review by ieee trans

Stacked Intelligent Metasurfaces (SIMs) have emerged as a promising technology for next-generation wireless systems. Especially in multi-input multi-output (MIMO) systems, it has the potential to realize complicated wave-domain transformations with low hardware costs and energy consumption. However, SIM-assisted MIMO systems face two major challenges in channel estimation and beamforming. As the SIM elements do not have the signal processing capability, channel estimation can only be conducted in an indirect manner, which makes it challenging. Moreover, the precoding optimization after channel estimation is non-convex and also difficult. Targeting these issues, we exploit the time-division duplex (TDD) channel reciprocity to calculate the gradient backpropagation in an over-the-air manner. Based on this structure, we propose a gradient-based optimization framework that optimizes beamforming without explicitly estimating the SIM--UE channel. The proposed method, namely the physical projected gradient descent (P2GD) method, optimizes the achievable sum rate while incorporating zero-forcing (ZF) constraints. Based on the method of incorporating the ZF restriction, we propose two variations of P2GD, namely user equipment (UE)-P2GD and base station (BS)-P2GD. We also provide a theoretical convergence analysis and projected gradient techniques to ensure physical feasibility. Simulation results show that the proposed approach can achieve suboptimal beamforming in the multi-user system within a small number of over-the-air iterations, using a per-direction signaling budget below the pilot cost of explicit SIM--UE channel estimation. The proposed method provides a low-overhead beamforming scheme for SIM systems without explicit SIM--UE channel estimation.

0.48

Fast Tri-Hybrid Beamforming via Deep Unfolding

eess.SP ·2026-08-27 ·Pinjun Zheng, Md. Jahangir Hossain, Anas Chaaban
top venue similarity 0.73
Abstract

Tri-hybrid multiple-input multiple-output architectures have recently emerged as a promising enabler for next-generation wireless systems, as they potentially provide enhanced design flexibility without a proportional increase in hardware cost or power consumption. However, the resulting triple-domain coupling renders beamforming optimization challenging and computationally demanding. This paper develops a fast tri-hybrid beamforming framework for multiuser downlink systems employing dynamic metasurface antennas (DMAs). Based on the equivalence between weighted sum-rate maximization and weighted sum-minimum mean square error minimization, an iterative algorithm is first derived under per-DMA input power constraints, with all update equations available in closed form, but convergence inherently remains slow. To enable real-time operation, the algorithm is further unfolded into a trainable finite-iteration architecture using graph neural networks that ensure permutation equivariance and support varying numbers of users. Trained on ray-tracing channel data, the unfolded method achieves comparable or higher system sum-rates while reducing runtime by more than an order of magnitude. The method also demonstrates strong scalability, robustness, and generalization across various environments.

0.41

Learning-Assisted Beamforming Optimization for Hybrid XL-RIS-Aided Communication

cs.IT ·2026-11-07 ·Awuni Mohammed Abdul-Razak, Kyungchun Lee
similarity 0.68
Abstract · 13 pages, 8 figures

Hybrid active-passive extremely large-scale reconfigurable intelligent surface (XL-RIS) architectures mitigate the double-hop path loss of passive RIS while enabling near-field spatial energy focusing, but impose a computationally intensive mixed discrete-continuous beamforming design problem under strict radio-frequency (RF) power constraints. This paper investigates a hybrid XL-RIS-assisted downlink multi-user multiple-input single-output (MU-MISO) system in the near-field regime. The joint optimization of the base station (BS) precoder, discrete XL-RIS phase shifts, and active-element amplification gains is addressed via a discrete coordinate ascent (DCA)-based alternating optimization (AO) framework, in which discrete variables are updated through local index-domain searches and the BS precoder is derived in closed form via a noise-aware minimum mean-square error (MMSE) criterion. To reduce the per-sample computational cost for XL-RIS apertures, a deep unfolding (DU) framework is proposed as a low-complexity alternative, unrolling a fixed number of Riemannian gradient ascent steps on the sum-rate objective and recovering the discrete phase configuration via quantized phasor projection, with one learnable step size per layer trained in a self-supervised manner. Numerical results under near-field spherical-wave channel models confirm that the DU framework achieves sum-rate performance close to the AO scheme with substantially lower and nearly constant runtime, and that both schemes consistently outperform manifold optimization under discrete hardware constraints.

0.19

Joint Beamforming for Continuous Transmissive RIS-Enabled Multiuser Communications

cs.IT ·2026-10-06 ·Beining Han, Shumeng Zhang, Deyou Zhang, Qingchao Li, Jun Liu +1 more
similarity 0.67
Abstract

This paper studies continuous transmissive reconfigurable intelligent surface (CT-RIS)-enabled multiuser downlink communications, where passive beamforming is characterized by a phase function defined over the continuous aperture. We employ a distance-dependent spherical-wave model for the base station (BS)-to-CT-RIS link and introduce a finite-path model based on field-response vectors for the CT-RIS-to-user links. The resulting weighted sum rate maximization problem jointly optimizes the finite-dimensional BS precoders and the infinite-dimensional CT-RIS phase function, giving rise to a mixed finite- and infinite-dimensional non-convex optimization problem. To address this problem, we develop an alternating optimization algorithm that combines a closed-form BS precoder update with a functional phase update derived using the calculus of variations and minorization-maximization. Numerical results demonstrate that the proposed CT-RIS consistently outperforms the considered benchmarks, with the performance gains attributed to spatially continuous phase control and a larger effective receiving area.

0.24

Hybrid Precoding and Combining for O-RAN Massive MIMO Systems

cs.IT ·2026-11-11 ·Seraphin F. Kimaryo, Jung-Mo Moon, Kyungchun Lee
benchmark similarity 0.66
Abstract · 16 pages, 13 figures

Recently, the radio access network (RAN) has been reimagined through open RAN (O-RAN) architecture to overcome the limitations of the traditional monolithic, black-box design philosophy and to leverage emerging technologies such as cloud computing, machine learning, and artificial intelligence. Although O-RAN disaggregates the base station (BS) into independent components to enable modular deployment, this paradigm introduces new challenges in signal processing and beamforming. In particular, beamforming in O-RAN must account for fronthaul link (FHL) capacity constraints, coordinated operation of multiple radio units (possibly from different vendors), and resource management, including transmit power allocation. To address these challenges, this work proposes novel beamforming techniques for a downlink multiuser hybrid massive multiple-input multiple-output system, in which hybrid architectures are deployed at both the users and at each BS radio unit. We formulate a sum-rate maximization problem incorporating transmit-power, unit-modulus, and FHL capacity constraints. The proposed algorithm integrates gradient descent and the Lagrange multiplier method to design analog beamformers and digital precoders, respectively, whereas digital combiners are designed to render the received streams parallel to each other. By avoiding computationally intensive operations such as eigenvalue and singular value decompositions, the proposed approach, as evidenced by simulation results, achieves superior performance with moderate computational complexity compared to existing benchmark schemes.

0.33

Reduced-Complexity WMMSE Approach for Cell-Free Massive MIMO Systems With Finite-Capacity Fronthaul Links

cs.IT eess.SP ·2026-11-11 ·Wonsik Yoo, Hoon Lee, Seok-Hwan Park
published similarity 0.66
Abstract

We propose a reduced-complexity weighted minimum mean squared error (R-WMMSE) framework for cell-free massive MIMO (CF-mMIMO) systems with finite-capacity fronthaul links. To maximize the system capacity, we need to jointly design beamforming vectors at distributed access points (APs) and fronthaul quantization noise covariances. Such a task would be addressed using conventional WMMSE algorithms and their variants. However, existing WMMSE-based methods either assume ideal infinite-capacity fronthaul links or incur high computational complexity when jointly optimizing the network-wide beamforming and fronthaul compression variables. To this end, the proposed method jointly optimizes beamforming and fronthaul compression by leveraging a sequential per-AP optimization strategy. Since each subproblem is efficiently solved via Lagrangian duality with closed-form updates, the overall computational complexity can be significantly reduced compared to the conventional WMMSE method. To further reduce hardware cost, we extend the R-WMMSE framework to hybrid analog-digital beamforming systems, tackling the joint design of digital beamforming, fronthaul compression, and analog beamforming. Numerical results show that the proposed scheme achieves performance nearly identical to that of the conventional WMMSE while reducing the runtime by over 99%.

0.36

Tri-Hybrid Beamforming Design for Large-Scale MIMO ISAC Systems

cs.IT ·2026-09-17 ·Tianyu Fang, Mengyuan Ma, Markku Juntti, Inkyu Lee, Joonhyuk Kang +1 more
similarity 0.66
Abstract · 13 pages, journal extention of our previous conference work

Tri-hybrid multiple-input multiple-output (MIMO) architectures have been proposed as a promising solution for enabling energy-efficient communications systems in large-scale antenna arrays by replacing conventional antenna arrays in hybrid beamforming (HBF) systems with low-cost dynamic metasurface antennas (DMAs). In this work, we investigate beamforming design for integrated sensing and communications (ISAC) systems based on tri-HBF architectures, with the objective of jointly enhancing the communications sum rate and sensing sum mutual information. Specifically, we formulate a weighted multi-objective optimization problem that balances communications throughput and sensing mutual information, subject to a total transmit power consumption constraint and the physical limitations inherent to tri-HBF architectures. By exploiting the problem structure, we develop an efficient iterative algorithm with closed-form updates to solve the non-convex optimization problem with low complexity. Numerical results are provided to evaluate the performance of the proposed tri-HBF architecture in various setups. The results demonstrate that the proposed tri-HBF architecture can achieve significant improvement in energy efficiency (EE) compared to the conventional hybrid MIMO and DMA-only configurations, at the cost of minor degradations in sum rate and sensing mutual information.

0.11

Energy Efficient Multi-User Beamforming and 3D Position Optimization for SIM-Assisted UAVs

eess.SP ·2026-08-13 ·Chandan Kumar Sheemar, Giovanni Iacovelli, Sourabh Solanki, Wali Ullah Khan, George C. Alexandropoulos +1 more
benchmark similarity 0.64
Abstract

This paper studies energy-efficient downlink multi-user transmissions with unmanned aerial vehicle (UAV) communication systems equipped with stacked intelligent metasurfaces (SIM), enabling wave-domain analog beamforming through multiple cascaded metasurface layers, while low-dimensional digital precoding is carried out using a limited number of transmit radio-frequency chains. This architecture enables flexible electromagnetic wave manipulation with reduced hardware complexity, making it particularly suitable for energy-constrained aerial platforms. We formulate a hardware-aware energy-efficiency (EE) maximization problem aiming to jointly optimize the digital precoder, the phase shifts of all SIM layers, and the three-dimensional UAV position under transmit-power, SIM operation, and UAV deployment constraints. The resulting problem is highly non-convex due to the fractional objective, the cascaded SIM structure and the unit-modulus phase constraints of the constituent metasurface layers, as well as the non-linear UAV-dependent channel. To address these challenges, we develop a transform-based alternating optimization framework that combines Dinkelbach's method, dual and quadratic transforms, to enable closed-form digital beamforming, Riemannian manifold optimization for SIM phase shifts, and successive convex approximation (SCA) for UAV positioning. Convergence and complexity analyses are provided to characterize the proposed algorithm. The presented numerical results showcase that the proposed joint design significantly improves EE compared with fully digital and maximum ratio transmission benchmark schemes, while revealing important design trade-offs among transmit power, SIM size, and the number of its constituent stacked layers.

0.40