CS Paper Radar

Tri-Hybrid Beamforming Design for Large-Scale MIMO ISAC Systems

Tianyu Fang, Mengyuan Ma, Markku Juntti, Inkyu Lee, Joonhyuk Kang, Nhan Thanh Nguyen

cs.IT ·submitted 2026-09-17 11:54 UTC · v1

Abstract

Tri-hybrid multiple-input multiple-output (MIMO) architectures have been proposed as a promising solution for enabling energy-efficient communications systems in large-scale antenna arrays by replacing conventional antenna arrays in hybrid beamforming (HBF) systems with low-cost dynamic metasurface antennas (DMAs). In this work, we investigate beamforming design for integrated sensing and communications (ISAC) systems based on tri-HBF architectures, with the objective of jointly enhancing the communications sum rate and sensing sum mutual information. Specifically, we formulate a weighted multi-objective optimization problem that balances communications throughput and sensing mutual information, subject to a total transmit power consumption constraint and the physical limitations inherent to tri-HBF architectures. By exploiting the problem structure, we develop an efficient iterative algorithm with closed-form updates to solve the non-convex optimization problem with low complexity. Numerical results are provided to evaluate the performance of the proposed tri-HBF architecture in various setups. The results demonstrate that the proposed tri-HBF architecture can achieve significant improvement in energy efficiency (EE) compared to the conventional hybrid MIMO and DMA-only configurations, at the cost of minor degradations in sum rate and sensing mutual information.

Comment
13 pages, journal extention of our previous conference work

Closest papers

Nearest neighbours by meaning across the whole index.

Fast Tri-Hybrid Beamforming via Deep Unfolding

eess.SP ·2026-08-27 ·Pinjun Zheng, Md. Jahangir Hossain, Anas Chaaban
top venue similarity 0.71
Abstract

Tri-hybrid multiple-input multiple-output architectures have recently emerged as a promising enabler for next-generation wireless systems, as they potentially provide enhanced design flexibility without a proportional increase in hardware cost or power consumption. However, the resulting triple-domain coupling renders beamforming optimization challenging and computationally demanding. This paper develops a fast tri-hybrid beamforming framework for multiuser downlink systems employing dynamic metasurface antennas (DMAs). Based on the equivalence between weighted sum-rate maximization and weighted sum-minimum mean square error minimization, an iterative algorithm is first derived under per-DMA input power constraints, with all update equations available in closed form, but convergence inherently remains slow. To enable real-time operation, the algorithm is further unfolded into a trainable finite-iteration architecture using graph neural networks that ensure permutation equivariance and support varying numbers of users. Trained on ray-tracing channel data, the unfolded method achieves comparable or higher system sum-rates while reducing runtime by more than an order of magnitude. The method also demonstrates strong scalability, robustness, and generalization across various environments.

0.41

Tri-Hybrid Beamforming Design for DMA-Aided Secure ISAC Systems

eess.SP ·2026-09-06 ·Siyi Li, Zhuoming Li, Mohammadali Mohammadi, Jiajun He, Hien Quoc Ngo +1 more
published similarity 0.66
Abstract · 6 pages, 4 figures, accepted by IEEE GLOBECOM 2026

This paper proposes a tri-hybrid beamforming scheme for secure integrated sensing and communication (ISAC) with a dynamic metasurface antenna (DMA) architecture, where the base station (BS) is capable of communicating with legitimate users and sensing the target. There is also an eavesdropper in the system intending to eavesdrop on the confidential information. The tri-hybrid beamforming design problem is formulated with the objective of maximizing the sensing signal-to-noise ratio (SNR) under the constraints of secrecy spectral efficiency (SSE), transmit power, and physical structure limitations. We first solve the problem and obtain the optimized fully-digital beamforming solution through successive convex approximation (SCA) and semidefinite relaxation (SDR) approaches. A triple alternating optimization scheme is then developed to iteratively optimize the digital, analog, and DMA beamformers, progressively approximating the fully-digital solution. Numerical results demonstrate that the proposed secure tri-hybrid beamforming design for DMA-aided ISAC improves the sensing SNR by approximately 3 dB compared to a tri-hybrid beamforming scheme with a fixed DMA electromagnetic design.

0.20

Joint Discrete Pinching-Antenna Activation and Beamforming Design for Efficient PASS-ISAC

eess.SP ·2026-10-02 ·Joshua Ogundiya, Animesh Yadav, Octavia Dobre
published similarity 0.66
Abstract · 6 pages, 5 figures, accepted for publication in the proceeding of the IEEE CCNC-2027

Pinching-antenna systems (PASS) offer flexible radiation points for integrated sensing and communication (ISAC), but existing designs largely assume continuous antenna placement, which may be impractical with pre-installed hardware. We investigate a discrete-activation multi-waveguide PASS-ISAC system that selects sparse transmit and receive pinching antennas (TPAs/RPAs) from predefined locations. We formulate a communication-rate maximization problem by jointly optimizing beamforming and TPA/RPA activation under transmit-power, activation, and sensing signal-to-noise ratio (SNR) constraints. To solve this nonconvex problem, we develop a low-complexity joint discrete pinching-antenna activation and beamforming optimization (JDPABO) algorithm based on alternating optimization, successive convex approximation, and reweighted $\ell_1$ minimization. Simulations show that JDPABO approaches continuous-placement performance at low sensing SNR requirements and outperforms fixed activation schemes with sparse PA activation.

0.25

Efficient Alternating Optimization for Hybrid Digital-Wave Beamforming in SIM-Assisted Cell-Free Massive MIMO

eess.SP cs.IT ·2026-08-23 ·Eunhyuk Park, Seok-Hwan Park, Osvaldo Simeone, Marco Di Renzo
published similarity 0.66
Abstract · IEEE PIMRC 2026

Stacked intelligent metasurfaces (SIMs) have recently emerged as a promising architecture for large-scale beamforming systems, including cell-free massive MIMO (CF-mMIMO), due to their cost-effective wave-domain signal processing capabilities. However, existing algorithms for the joint optimization of digital and SIM-enabled wave-domain beamforming typically incur prohibitive computational complexity. In this work, we propose an efficient alternating optimization (AO) algorithm for weighted sum-rate maximization in SIM-assisted CF-mMIMO systems employing hybrid digital-wave beamforming. Unlike prior approaches that rely on general-purpose optimization solvers or per-element gradient ascent methods, the proposed algorithm updates the digital and wave-domain beamforming variables on a per-access point (AP) or per-SIM-layer basis, enabling closed-form updates at each step. Numerical results demonstrate that the proposed algorithm reduces the computational complexity by more than 99\% compared to existing algorithms while achieving nearly identical sum-rate performance.

0.42

Waveform Design for Simultaneous MIMO Radar Sensing and Multi-User Communication

eess.SP ·2026-08-23 ·Berkan Kilic, Kenan Turbic, Slawomir Stanczak
publishedhighly cited similarity 0.64
Abstract

This paper proposes a novel two-stage joint waveform design framework for multi-antenna Integrated Sensing and Communication (ISAC) systems that simultaneously enable Multiple-Input Multiple-Output (MIMO) radar sensing and Multi-User MIMO communication. First, a transmit waveform covariance matrix is designed by solving a convex matrix nearness problem for beampattern synthesis that simultaneously maximizes transmit power in desired directions and minimizes cross-directional correlations, while accommodating independent antenna power constraints and supporting interference suppression through radiation null steering. Second, a waveform conforming to the designed covariance is synthesized while additionally enforcing inter-user interference suppression via the zero-forcing approach and imposing practical implementation constraints, notably limiting the peak-to-average-power-ratio on the individual antenna elements. Simulation results demonstrate that the approach significantly enhances ISAC waveform design flexibility, performance, and computational efficiency compared to the alternative methods in the literature.

0.58

Robust Beamforming Design for Integrated Sensing and Communications with Mutual Coupling Effect

eess.SP ·2026-08-16 ·Jieon Maeng, Kawon Han
published similarity 0.64
Abstract · 5 pages, 5 figures, submitted to IEEE Wireless Communication Letters, 2026

Integrated sensing and communications (ISAC) is a key technology for next-generation wireless networks, enabling communication and radar sensing over shared spectral and hardware resources. In practical multi-user multiple-input multiple-output (MU-MIMO) ISAC transmitters, however, mutual coupling (MC) between antenna elements distorts the array steering vector and each communication user (CU) channel, so that the sensing beampattern deviates from the desired one and the communication link to each user degrades. To address this limitation, we propose a robust MC-compensated beamforming design that guarantees both the sensing and communication performance of MU-MIMO ISAC transmitters against the residual MC error. We introduce a residual error on the MC matrix, so that a norm-bounded residual error induces both the sensing beampattern uncertainty and the communication channel uncertainty. The transmit covariance is then optimized against the worst-case of each uncertainty, minimizing the worst-case beampattern matching mean-squared error (MSE) for sensing while guaranteeing the signal-to-interference-plus-noise ratio (SINR) for each CU. Each worst-case constraint is converted into a linear matrix inequality, and the problem becomes a convex semidefinite program (SDP). Numerical results show that the proposed robust design attains both a lower sensing beampattern matching MSE and a higher communication SINR than those of the conventional designs, with an advantage that widens as the residual error grows.

0.58

An Efficient SIM Beamforming Scheme Based on Physical-Empowered Projected Gradient

eess.SP ·2026-10-29 ·Yuzhi Yang, Hao Liu, Tianhao Guo, Jiancheng An, Lu Gan +2 more
similarity 0.63
Abstract · under review by ieee trans

Stacked Intelligent Metasurfaces (SIMs) have emerged as a promising technology for next-generation wireless systems. Especially in multi-input multi-output (MIMO) systems, it has the potential to realize complicated wave-domain transformations with low hardware costs and energy consumption. However, SIM-assisted MIMO systems face two major challenges in channel estimation and beamforming. As the SIM elements do not have the signal processing capability, channel estimation can only be conducted in an indirect manner, which makes it challenging. Moreover, the precoding optimization after channel estimation is non-convex and also difficult. Targeting these issues, we exploit the time-division duplex (TDD) channel reciprocity to calculate the gradient backpropagation in an over-the-air manner. Based on this structure, we propose a gradient-based optimization framework that optimizes beamforming without explicitly estimating the SIM--UE channel. The proposed method, namely the physical projected gradient descent (P2GD) method, optimizes the achievable sum rate while incorporating zero-forcing (ZF) constraints. Based on the method of incorporating the ZF restriction, we propose two variations of P2GD, namely user equipment (UE)-P2GD and base station (BS)-P2GD. We also provide a theoretical convergence analysis and projected gradient techniques to ensure physical feasibility. Simulation results show that the proposed approach can achieve suboptimal beamforming in the multi-user system within a small number of over-the-air iterations, using a per-direction signaling budget below the pilot cost of explicit SIM--UE channel estimation. The proposed method provides a low-overhead beamforming scheme for SIM systems without explicit SIM--UE channel estimation.

0.48

Physics-Aware Transformer-Based Beamforming Optimization for Near-Field E-MIMO ISAC Systems

eess.SP ·2026-11-12 ·Mohsin Ali, Abdulahi Abiodun Badrudeen, Azharul Islam, Sunwoo Kim
similarity 0.63
Abstract

This paper proposes a physics-aware Transformer-based beamforming optimization (PATBO) framework for near-field extreme massive multiple-input multiple-output integrated sensing and communication (E-MIMO-ISAC) systems. PATBO combines regularized zero-forcing (RZF) communication directions and spherical-wave near-field sensing directions with learned stream-power allocation. A token-preserving Transformer maintains the correspondence between individual users/targets and their allocated powers, while a Cramér--Rao bound (CRB)-sensitivity-aware objective emphasizes power-allocation errors with greater localization impact. Physical feasibility is explicitly verified after inference, with infeasible predictions handled through physics-constrained power repair and optimizer fallback. For a $32\times32$ E-MIMO array with $1024$ antennas, the proposed structured representation reduces the learned output from $12{,}288$ real-valued coefficients of an unstructured complex beamformer to six stream-power variables. Direct PATBO achieves $100.98\%$ reference-rate retention and $19.54\%$ joint feasibility, which increases to $87.79\%$ after repair. The complete hybrid framework achieves $99.89\%$ reference-rate retention and $100\%$ constraint satisfaction on the retained test set, while requiring optimizer fallback for only $12.21\%$ of the scenarios. Direct PATBO inference requires $1.11$~ms per sample, corresponding to approximately $858\times$ and $779\times$ lower runtime than the evaluated cold-start and PATBO-warm-start sequential quadratic programming (SQP) implementations, respectively.

0.15