CS Paper Radar

Robust Beamforming Design for Integrated Sensing and Communications with Mutual Coupling Effect

Jieon Maeng, Kawon Han

eess.SP ·submitted 2026-08-16 06:07 UTC · v2
published

Abstract

Integrated sensing and communications (ISAC) is a key technology for next-generation wireless networks, enabling communication and radar sensing over shared spectral and hardware resources. In practical multi-user multiple-input multiple-output (MU-MIMO) ISAC transmitters, however, mutual coupling (MC) between antenna elements distorts the array steering vector and each communication user (CU) channel, so that the sensing beampattern deviates from the desired one and the communication link to each user degrades. To address this limitation, we propose a robust MC-compensated beamforming design that guarantees both the sensing and communication performance of MU-MIMO ISAC transmitters against the residual MC error. We introduce a residual error on the MC matrix, so that a norm-bounded residual error induces both the sensing beampattern uncertainty and the communication channel uncertainty. The transmit covariance is then optimized against the worst-case of each uncertainty, minimizing the worst-case beampattern matching mean-squared error (MSE) for sensing while guaranteeing the signal-to-interference-plus-noise ratio (SINR) for each CU. Each worst-case constraint is converted into a linear matrix inequality, and the problem becomes a convex semidefinite program (SDP). Numerical results show that the proposed robust design attains both a lower sensing beampattern matching MSE and a higher communication SINR than those of the conventional designs, with an advantage that widens as the residual error grows.

Comment
5 pages, 5 figures, submitted to IEEE Wireless Communication Letters, 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Robust Beamforming and Antenna Position Optimization for MA-Assisted ISAC with Imperfectly Positioned MAs

eess.SP ·2026-09-20 ·Zeyuan Zhang, Ning Wei, Ahmad Bazzi, Boyang Jia, Huimin Tang +2 more
similarity 0.74
Abstract

This paper investigates robust beamforming and antenna position design for movable antenna (MA)-enabled integrated sensing and communication (ISAC) systems under antenna position errors. In particular, deviations between the actual and nominal antenna positions in practical MA arrays are inevitable due to limited mechanical accuracy. Therefore, the conventional ISAC design based on nominal positions may suffer from substantial performance degradation. To address this issue, we consider a monostatic downlink MA-ISAC system in which each transmission frame consists of a low-power pilot and an ISAC payload. The target angle, reflection coefficient, and antenna position-error vector are jointly estimated based on these two observations, thereby enabling sensing with imperfectly known antenna positions. We derive the resulting angle Cramer-Rao bound (CRB) and formulate a problem that minimizes its worst-case value subject to each user's signal-to-interference-plus-noise ratio (SINR) requirement under all possible position errors. By exploiting a common phase-response decomposition, we obtain tractable reformulations and develop an alternating optimization (AO) algorithm for the beamforming vectors and nominal antenna positions. Numerical results demonstrate that, compared with conventional nominal-position designs, the proposed robust scheme achieves improved communication reliability while maintaining competitive sensing accuracy under practical antenna position uncertainty.

0.13

Waveform Design for Simultaneous MIMO Radar Sensing and Multi-User Communication

eess.SP ·2026-08-23 ·Berkan Kilic, Kenan Turbic, Slawomir Stanczak
publishedhighly cited similarity 0.73
Abstract

This paper proposes a novel two-stage joint waveform design framework for multi-antenna Integrated Sensing and Communication (ISAC) systems that simultaneously enable Multiple-Input Multiple-Output (MIMO) radar sensing and Multi-User MIMO communication. First, a transmit waveform covariance matrix is designed by solving a convex matrix nearness problem for beampattern synthesis that simultaneously maximizes transmit power in desired directions and minimizes cross-directional correlations, while accommodating independent antenna power constraints and supporting interference suppression through radiation null steering. Second, a waveform conforming to the designed covariance is synthesized while additionally enforcing inter-user interference suppression via the zero-forcing approach and imposing practical implementation constraints, notably limiting the peak-to-average-power-ratio on the individual antenna elements. Simulation results demonstrate that the approach significantly enhances ISAC waveform design flexibility, performance, and computational efficiency compared to the alternative methods in the literature.

0.58

ISAC Beamforming Design Based on a Matrix Nearness Formulation With Improved Efficiency

eess.SP ·2026-08-23 ·Berkan Kilic, Kenan Turbic, Slawomir Stanczak
published similarity 0.70
Abstract

We propose an integrated sensing and communication (ISAC) beamforming method that performs joint multiple-input multiple-output (MIMO) radar sensing and multi-user MIMO communication. Our approach builds on a matrix nearness formulation of the MIMO radar problem and utilizes our recently proposed efficient solver, where the computational complexity is dominated by an eigenvalue decomposition (EVD) evaluation at each iteration. We extend this formulation to an ISAC scenario by incorporating minimum signal-to-noise ratio constraints as communication design criteria, only requiring statistical channel state information knowledge at base station. Furthermore, we propose a method to avoid the burdensome EVD evaluations in certain iterations, reducing the computation time by up to six times in a massive MIMO setting.

0.52

Toward Reliable and Accurate Predictive ISAC in Mobile mmWave Networks

eess.SP ·2026-09-24 ·Atefeh Rezaei, Vahid Jamali, Falko Dressler
similarity 0.69
Abstract

Integrated sensing and communications (ISAC) systems offer a promising framework for beam tracking, which enhances channel awareness and improves communication reliability in mobile millimeter wave (mmWave) networks. Motivated by this, we propose a low-complexity, model-driven channel state information (CSI) framework with integrated channel prediction capability in ISAC-enabled systems. To reduce the overhead of CSI acquisition and uplink feedback, the proposed framework leverages predicted target sensing parameters to construct partial CSI from both line-of-sight (LoS) and detected non-line-of-sight (NLoS) components. Exploiting this partial CSI, we formulate a beamforming optimization problem that minimizes the worst targets' Cramér-Rao bound (CRB) under per-user communication constraints. This problem is non-convex and highly non-linear; therefore, we develop an efficient suboptimal solution using successive convex approximation (SCA) and Schur-complement-based decomposition techniques, and we evaluate its complexity in comparison with other approaches. Moreover, since obtaining the absolute phase of the channel paths may require additional pilot resources, we formulate a robust beamforming design that does not assume this knowledge, and propose a solution based on sample averaging. Numerical results demonstrate that the ISAC-based robust channel prediction and localization framework significantly improves prediction accuracy and link reliability compared with conventional schemes, such as communication-based localization and tracking and separated sensing and communication. These results highlight the potential of ISAC for reliable, adaptive, and high-frequency, blockage-prone wireless networks. Furthermore, the performance of the proposed framework is evaluated under severe blockage scenarios, which further demonstrates enhanced network reliability.

0.16

Electromagnetically Consistent Monostatic ISAC Beamforming: Mutual Coupling, Active Mismatch and Tx-Rx Leakage in Compact Dipole Arrays

eess.SP ·2026-11-05 ·Stylianos D. Asimonis, Christos Tselios, Dimitrios Tyrovolas, Ilias Politis, George K. Karagiannidis
similarity 0.67
Abstract · 6 pages, 9 figures, 2 tables. Submitted to IEEE ICC 2027

Beamforming for integrated sensing and communication (ISAC) is usually designed on ideal array manifolds with a norm constraint on the transmit signal. In a compact monostatic transceiver this hides three antenna effects: distorted embedded patterns, beam-dependent active mismatch at the power amplifiers, and transmit-to-receive leakage that raises the radar noise floor. We build a multiport scattering model of a shared-aperture dipole array directly from method-of-moments simulations and use it to formulate a Cramer-Rao bound minimizing ISAC beamformer with multiuser SINR constraints, per-port active reflection constraints and a leakage budget, solved as a semidefinite program with a one-dimensional budget search. Full-wave evaluation shows that coupling-unaware designs miss their SINR targets by up to 6.2 dB and drive amplifiers to an equivalent VSWR above 3.3 at small spacings. For spacings from 0.3 to 0.5 wavelengths, the proposed design meets all targets with an equivalent VSWR below 2 and lowers the root Cramer-Rao bound by 32 to 53 percent for 80 dB of self-interference cancellation and by a factor of 3.4 to 5.6 for 70 dB. An independent finite-difference time-domain model of the final layout in openEMS confirms that the leakage null and the ranking of the designs are preserved.

0.24

One ISAC Array, Two Worst Cases: Hardware Impairments in Beamforming and AoA Estimation

eess.SP ·2026-11-04 ·Xuan Chen, Luc Le Magoarou
similarity 0.66
Abstract

In integrated sensing and communication (ISAC), the same base-station array beamforms toward users and estimates their angle of arrival (AoA). In this paper, we study how element-level gain, phase, and position errors affect both functions of a beam-scanning uniform linear array. Any array produces a correlation peak at the true angle, of finite height and width, surrounded by sidelobes. Impairments shift this peak, make it lower and wider, and raise the sidelobes relative to it. A single decomposition explains these three effects: the gain-weighted least-squares fit of the per-antenna phase errors splits them into a tilt, which shifts the peak, and a residual, whose power is taken from the peak and redistributed over the sidelobes according to its spatial spectrum. A beam steered toward the strongest direction suffers from the lower peak only, whereas the AoA estimate suffers from its shift even without noise, and also from the lowering and sidelobes with noise. The worst cases for the two ISAC functions are thus nearly disjoint, and we characterize both: the worst case for beamforming leaves the AoA estimate unbiased, and the worst case for localization loses little beamforming gain. The worst case for localization is a single defect at the junction between two subarrays, and its error, relative to the main-lobe width, does not decrease with the number of antennas. We also characterize random impairments and the effect of noise. In practical terms, our analysis shows that the calibration of a dual-function array must be assessed with respect to both functions.

0.23

Joint Association and Beamforming Design for Cooperative ISAC Systems

eess.SP ·2026-11-04 ·Abhishek Rajasekaran, Mehdi Karbalayghareh, Xiaoyan Ma, David J. Love, Christopher G. Brinton
theory similarity 0.66
Abstract · 6 pages, 5 figures

Cooperation among multiple base stations (BSs) improves both communication and sensing in integrated sensing and communication (ISAC) networks. However, it requires deciding which BSs serve each communication user (CU) and each target, and how each BS beamforms. In this work, we consider joint BS-CU and BS-target association, and beamforming for a general cooperative ISAC system, overcoming prior simplifications such as single-user or target setups, fixed BS roles, coherent radar or separate waveforms. We maximize a joint communication rate and position Cramer-Rao lower bound (CRLB) based tradeoff utility while guaranteeing a minimum service per-CU using a data queue model. We develop a successive convex approximation (SCA)-based beamforming with closed-form updates. The discrete association problem is solved as an overarching layer using a low-complexity algorithm. Numerical results validate the effectiveness of the algorithm and unveil benefits of cooperative communication and sensing.

0.26

Robust Beamforming and Power Allocation for Coherent Cell-Free Massive MIMO with Residual Calibration Errors

eess.SP ·2026-08-11 ·Mingjun Sun, Xidong Mu, Shaochuan Wu, Chongjun Ouyang, Hyundong Shin
similarity 0.66
Abstract

This paper investigates robust downlink transmission to tolerate calibration aging in time-division duplex cell-free massive multiple-input multiple-output (CF-mMIMO) systems with residual calibration errors (RCEs). Unlike existing studies that typically treat RCEs as static impairments, we develop a time-evolving RCE model that characterizes the joint effects of residual phase mismatches, residual carrier frequency offsets, and oscillator phase noise. Based on this model, two practical processing architectures are considered: instantaneous calibrated-channel-based robust beamforming (BF) and statistical beamformed-channel-based robust power allocation (PA). For both architectures, tractable achievable rate lower bounds are derived, which explicitly reveal the impact of calibration aging on coherent combining, BF-gain uncertainty, and inter-user interference. Using these lower bounds as design metrics, we formulate an effective weighted sum-rate (EWSR) maximization problem over the data transmission interval, so that the resulting BF and PA designs can account for the temporal evolution of RCEs rather than a single calibrated instant. To efficiently solve the resulting problems, a Gauss--Legendre quadrature-based weighted minimum mean square error (WMMSE) optimization framework is developed, where both robust BF and PA are updated in an access point (AP)-block manner with closed-form solutions under per-AP power constraints. Simulation results demonstrate that: i) the proposed algorithms exhibit stable convergence; ii) the proposed robust BF and PA schemes achieve higher EWSR by explicitly accounting for calibration aging than their non-robust counterparts; and iii) robust BF achieves higher spectral efficiency (SE), whereas robust PA provides a more favorable tradeoff between SE and implementation cost in terms of computational complexity and fronthaul overhead.

0.04