CS Paper Radar

Robust Beamforming and Antenna Position Optimization for MA-Assisted ISAC with Imperfectly Positioned MAs

Zeyuan Zhang, Ning Wei, Ahmad Bazzi, Boyang Jia, Huimin Tang, Huai Wang, Yue Xiu

eess.SP ·submitted 2026-09-20 03:22 UTC · v1

Abstract

This paper investigates robust beamforming and antenna position design for movable antenna (MA)-enabled integrated sensing and communication (ISAC) systems under antenna position errors. In particular, deviations between the actual and nominal antenna positions in practical MA arrays are inevitable due to limited mechanical accuracy. Therefore, the conventional ISAC design based on nominal positions may suffer from substantial performance degradation. To address this issue, we consider a monostatic downlink MA-ISAC system in which each transmission frame consists of a low-power pilot and an ISAC payload. The target angle, reflection coefficient, and antenna position-error vector are jointly estimated based on these two observations, thereby enabling sensing with imperfectly known antenna positions. We derive the resulting angle Cramer-Rao bound (CRB) and formulate a problem that minimizes its worst-case value subject to each user's signal-to-interference-plus-noise ratio (SINR) requirement under all possible position errors. By exploiting a common phase-response decomposition, we obtain tractable reformulations and develop an alternating optimization (AO) algorithm for the beamforming vectors and nominal antenna positions. Numerical results demonstrate that, compared with conventional nominal-position designs, the proposed robust scheme achieves improved communication reliability while maintaining competitive sensing accuracy under practical antenna position uncertainty.

Closest papers

Nearest neighbours by meaning across the whole index.

One ISAC Array, Two Worst Cases: Hardware Impairments in Beamforming and AoA Estimation

eess.SP ·2026-11-04 ·Xuan Chen, Luc Le Magoarou
similarity 0.77
Abstract

In integrated sensing and communication (ISAC), the same base-station array beamforms toward users and estimates their angle of arrival (AoA). In this paper, we study how element-level gain, phase, and position errors affect both functions of a beam-scanning uniform linear array. Any array produces a correlation peak at the true angle, of finite height and width, surrounded by sidelobes. Impairments shift this peak, make it lower and wider, and raise the sidelobes relative to it. A single decomposition explains these three effects: the gain-weighted least-squares fit of the per-antenna phase errors splits them into a tilt, which shifts the peak, and a residual, whose power is taken from the peak and redistributed over the sidelobes according to its spatial spectrum. A beam steered toward the strongest direction suffers from the lower peak only, whereas the AoA estimate suffers from its shift even without noise, and also from the lowering and sidelobes with noise. The worst cases for the two ISAC functions are thus nearly disjoint, and we characterize both: the worst case for beamforming leaves the AoA estimate unbiased, and the worst case for localization loses little beamforming gain. The worst case for localization is a single defect at the junction between two subarrays, and its error, relative to the main-lobe width, does not decrease with the number of antennas. We also characterize random impairments and the effect of noise. In practical terms, our analysis shows that the calibration of a dual-function array must be assessed with respect to both functions.

0.23

Massive MIMO ISAC Under Target-Angle Uncertainty: CRLB Outage Analysis and Robust Resource Allocation

eess.SP ·2026-09-16 ·Smriti Uniyal, Tianyu Fang, Van-Dinh Nguyen, Hien Quoc Ngo, Markku Juntti +1 more
similarity 0.74
Abstract

In integrated sensing and communications (ISAC), the same spectral and hardware resources are shared for two functionalities. Most ISAC designs assume perfect target-angle information neglecting angle estimation errors, which introduce steering-vector mismatches, degrade sensing accuracy, and may invalidate deterministic sensing guarantees. This paper investigates monostatic massive multiple-input-multiple-output (MIMO) ISAC systems under imperfect target-angle estimates. We derive closed-form expressions for the Cramér-Rao lower bounds (CRLBs) of target azimuth and elevation estimates in the presence of angle uncertainty. We characterize the cumulative distribution functions and outage probabilities of the CRLBs under Gaussian, generalized uniform, and von Mises angle-error models. Our analysis reveals that, in the small-error regime, the CRLBs increase quadratically with the angle errors due to transmit steering-vector mismatch. To ensure reliable sensing, we propose a robust power allocation framework that jointly optimizes pilot training and communications/sensing transmission powers to maximize the communications sum rate while satisfying CRLB outage constraints. The resulting nonconvex problem is solved using an alternating-optimization algorithm based on successive convex approximation. Numerical results validate the developed analysis and show that the proposed robust design reduces azimuth and elevation CRLB outage probabilities by up to $60\%$ compared with conventional non-robust schemes. It attains up to $45\%$ higher sum rates than the non-robust design under strict CRLB thresholds.

0.20

Robust Beamforming Design for Integrated Sensing and Communications with Mutual Coupling Effect

eess.SP ·2026-08-16 ·Jieon Maeng, Kawon Han
published similarity 0.74
Abstract · 5 pages, 5 figures, submitted to IEEE Wireless Communication Letters, 2026

Integrated sensing and communications (ISAC) is a key technology for next-generation wireless networks, enabling communication and radar sensing over shared spectral and hardware resources. In practical multi-user multiple-input multiple-output (MU-MIMO) ISAC transmitters, however, mutual coupling (MC) between antenna elements distorts the array steering vector and each communication user (CU) channel, so that the sensing beampattern deviates from the desired one and the communication link to each user degrades. To address this limitation, we propose a robust MC-compensated beamforming design that guarantees both the sensing and communication performance of MU-MIMO ISAC transmitters against the residual MC error. We introduce a residual error on the MC matrix, so that a norm-bounded residual error induces both the sensing beampattern uncertainty and the communication channel uncertainty. The transmit covariance is then optimized against the worst-case of each uncertainty, minimizing the worst-case beampattern matching mean-squared error (MSE) for sensing while guaranteeing the signal-to-interference-plus-noise ratio (SINR) for each CU. Each worst-case constraint is converted into a linear matrix inequality, and the problem becomes a convex semidefinite program (SDP). Numerical results show that the proposed robust design attains both a lower sensing beampattern matching MSE and a higher communication SINR than those of the conventional designs, with an advantage that widens as the residual error grows.

0.58

Electromagnetically Consistent Monostatic ISAC Beamforming: Mutual Coupling, Active Mismatch and Tx-Rx Leakage in Compact Dipole Arrays

eess.SP ·2026-11-05 ·Stylianos D. Asimonis, Christos Tselios, Dimitrios Tyrovolas, Ilias Politis, George K. Karagiannidis
similarity 0.73
Abstract · 6 pages, 9 figures, 2 tables. Submitted to IEEE ICC 2027

Beamforming for integrated sensing and communication (ISAC) is usually designed on ideal array manifolds with a norm constraint on the transmit signal. In a compact monostatic transceiver this hides three antenna effects: distorted embedded patterns, beam-dependent active mismatch at the power amplifiers, and transmit-to-receive leakage that raises the radar noise floor. We build a multiport scattering model of a shared-aperture dipole array directly from method-of-moments simulations and use it to formulate a Cramer-Rao bound minimizing ISAC beamformer with multiuser SINR constraints, per-port active reflection constraints and a leakage budget, solved as a semidefinite program with a one-dimensional budget search. Full-wave evaluation shows that coupling-unaware designs miss their SINR targets by up to 6.2 dB and drive amplifiers to an equivalent VSWR above 3.3 at small spacings. For spacings from 0.3 to 0.5 wavelengths, the proposed design meets all targets with an equivalent VSWR below 2 and lowers the root Cramer-Rao bound by 32 to 53 percent for 80 dB of self-interference cancellation and by a factor of 3.4 to 5.6 for 70 dB. An independent finite-difference time-domain model of the final layout in openEMS confirms that the leakage null and the ranking of the designs are preserved.

0.24

Cooperative Target Localization in RIS-Enabled ISAC Systems

eess.SP ·2026-09-30 ·Rouhollah Amiri, Abdollah Ajorloo, Mohammad Mahdi Mojahedian, Ahmad Reza Hassanshahi, Fabiola Colone
similarity 0.72
Abstract

This paper develops a cooperative integrated sensing and communication (ISAC) framework in which a multi-antenna base station (BS) simultaneously localizes a target and serves multiple communication users, a subset of which is equipped with reconfigurable intelligent surfaces (RISs). The Fisher information matrix (FIM) for target positioning is derived, explicitly characterizing its dependence on the BS beamforming coefficients, RIS phase profiles, and bistatic sensing geometry. Under the stated scaling assumptions, coherent RIS phase alignment yields a Fisher-information gain that scales quadratically with the number of RIS elements, whereas independent random phases provide a linear gain in expectation. We formulate a sensing-centric joint active and passive beamforming problem that minimizes the position error bound (PEB) subject to per-user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. The resulting non-convex problem is addressed through an iterative successive convex approximation (SCA) procedure that solves a sequence of convex subproblems. We further develop a target localization estimator that fuses one direct time-of-arrival (ToA) measurement, one angle-of-arrival (AoA) measurement, and multiple RIS-assisted indirect ToA measurements. Under small measurement errors and asymptotically efficient first-stage ToA/AoA estimation, the estimator covariance approaches the Cramér--Rao bound (CRB) to first order. Numerical results validate the analytical scaling laws and demonstrate the localization gains enabled by cooperative RIS-equipped users.

0.13

Certified Dynamic Subspace Optimization for Bayesian ISAC Design

eess.SP ·2026-11-12 ·Zongyao Zhao, Cheng-Jie Zhao, Zhaolin Wang, Qingjiang Shi, Yuanwei Liu
similarity 0.72
Abstract · 19 pages, 10 figures, submitted to IEEE journal

Full-space covariance optimization is costly in large-array Bayesian integrated sensing and communication (ISAC). A fixed transmit subspace can reduce this cost, but the resulting optimality loss depends on the posterior distribution. In this paper, a certified dynamic subspace method is developed for angle Bayesian Cramér-Rao bound (BCRB) minimization under joint angle and complex-gain uncertainty. For uniform linear arrays, exact response preservation over a nondegenerate posterior angular interval requires the full antenna space. Subspace sufficiency is therefore assessed through full-space objective-gap bounds. A communication-feasible basis is initialized from the user-channel span and local BCRB sensitivity. Restricted semidefinite programs are then solved. Primal restoration and dual repair yield gap bounds that remain valid after lossless user-beam recovery. When an accurate restricted solve does not certify the requested tolerance, the basis is expanded using a direction identified from the covariance dual slacks. Under a strict communication-power margin, joint uniqueness of the restricted optimal dual multipliers is established. With exact restricted solves, this uniqueness guarantees strict BCRB improvement after certificate-driven expansion. Numerical results validate the bounds against full-space references for the sampled problems. Compared with a fixed Fisher ordering, the proposed method can reach the same certificate target with fewer dimensions. On large arrays, total runtime is reduced relative to the full-space and factorized baselines at matched certificate targets.

0.25

Fluid Antenna Array-Enabled Near-Field ISAC: Joint Port Position Optimization and Transmit Beamforming Design

cs.IT ·2026-11-02 ·Wangqi Shi, Zhentian Zhang, Hao Jiang, Zaichen Zhang, Kin-Fai Tong
similarity 0.71
Abstract

Fluid antenna systems (FASs) have shown that activating a single port from a densely packed antenna array can yield spatial diversity comparable to that of tens of independent antennas, a property that has substantially improved communication reliability and efficiency. The fluid antenna array (FAA) extends this concept to multi-port configurations while avoiding complex multi-dimensional spatial correlation, and offers significant geometrical flexibility under a finite aperture and a limited port budget. These attributes motivate environment-adaptive array geometry for sensing in integrated sensing and communication (ISAC) systems. Although this flexibility enables adaptive array geometries that exploit near-field distance-angle information, improving multi-parameter target estimation under communication and deployment constraints remains challenging. In this paper, we propose a planar FAA-assisted near-field ISAC framework for multiuser communication and target sensing. Specifically, we derive the Fisher information matrix (FIM) and the corresponding Cramér-Rao bound (CRB) for the joint estimation of target range, zenith angle, azimuth angle, and radial velocity. Based on the derived CRB, we jointly optimize the FAA port positions and transmit beamforming to improve sensing accuracy while satisfying communication signal-to-interference-plus-noise ratio (SINR), transmit power, and physical deployment constraints. To solve the resulting non-convex problem, we develop a two-stage alternating optimization algorithm, in which transmit beamforming is optimized through semidefinite relaxation (SDR), while FAA port positions are successively optimized through discrete search and continuous refinement. Simulation results indicate that the proposed algorithm achieves favorable sensing performance while maintaining a reasonable computational cost.

0.16

Movable Antenna-Aided ISAC: A Time- and Frequency-Division Framework

cs.IT ·2026-11-13 ·Yuyan Zhou, Haocheng Hua, Jie Xu, Rui Zhang
similarity 0.71
Abstract · 13 pages, 9 figures, 1 table

This paper investigates movable-antenna (MA)-enhanced integrated sensing and communication (ISAC) under time division duplex (TDD) and frequency division duplex (FDD) protocols, where sensing and communications occupy orthogonal time and frequency resources, respectively. A wideband target-position Cramér-Rao bound (CRB) is derived under a pulse-radar framework with pulse compression, incorporating delay and angle estimation error bounds in Cartesian coordinates. Both bounds depend on sensing power; the delay bound also depends on sensing bandwidth, while the angle bound depends on the effective aperture determined by the antenna position vector (APV). A worst-case position CRB over a prescribed target region ensures robust sensing performance. For multiuser downlink communication, joint APV and resource-allocation problems are formulated for TDD and FDD to maximize the minimum achievable user rate subject to the sensing requirement. An alternating optimization algorithm is developed for FDD, while TDD is addressed by searching over feasible sensing pulse numbers combined with APV optimization. Representative scenarios clarify how MA improves channel orthogonality and enlarges the sensing aperture, and how these effects shape the TDD/FDD rate comparison. Numerical results show that APV optimization enlarges the communication-sensing tradeoff region over fixed-position antenna benchmarks. The optimized configurations exhibit distinct tendencies: TDD favors a larger antenna position variance, whereas FDD favors better channel orthogonality among users.

0.15