CS Paper Radar

One ISAC Array, Two Worst Cases: Hardware Impairments in Beamforming and AoA Estimation

Xuan Chen, Luc Le Magoarou

eess.SP ·submitted 2026-11-04 09:41 UTC · v1

Abstract

In integrated sensing and communication (ISAC), the same base-station array beamforms toward users and estimates their angle of arrival (AoA). In this paper, we study how element-level gain, phase, and position errors affect both functions of a beam-scanning uniform linear array. Any array produces a correlation peak at the true angle, of finite height and width, surrounded by sidelobes. Impairments shift this peak, make it lower and wider, and raise the sidelobes relative to it. A single decomposition explains these three effects: the gain-weighted least-squares fit of the per-antenna phase errors splits them into a tilt, which shifts the peak, and a residual, whose power is taken from the peak and redistributed over the sidelobes according to its spatial spectrum. A beam steered toward the strongest direction suffers from the lower peak only, whereas the AoA estimate suffers from its shift even without noise, and also from the lowering and sidelobes with noise. The worst cases for the two ISAC functions are thus nearly disjoint, and we characterize both: the worst case for beamforming leaves the AoA estimate unbiased, and the worst case for localization loses little beamforming gain. The worst case for localization is a single defect at the junction between two subarrays, and its error, relative to the main-lobe width, does not decrease with the number of antennas. We also characterize random impairments and the effect of noise. In practical terms, our analysis shows that the calibration of a dual-function array must be assessed with respect to both functions.

Closest papers

Nearest neighbours by meaning across the whole index.

Robust Beamforming and Antenna Position Optimization for MA-Assisted ISAC with Imperfectly Positioned MAs

eess.SP ·2026-09-20 ·Zeyuan Zhang, Ning Wei, Ahmad Bazzi, Boyang Jia, Huimin Tang +2 more
similarity 0.77
Abstract

This paper investigates robust beamforming and antenna position design for movable antenna (MA)-enabled integrated sensing and communication (ISAC) systems under antenna position errors. In particular, deviations between the actual and nominal antenna positions in practical MA arrays are inevitable due to limited mechanical accuracy. Therefore, the conventional ISAC design based on nominal positions may suffer from substantial performance degradation. To address this issue, we consider a monostatic downlink MA-ISAC system in which each transmission frame consists of a low-power pilot and an ISAC payload. The target angle, reflection coefficient, and antenna position-error vector are jointly estimated based on these two observations, thereby enabling sensing with imperfectly known antenna positions. We derive the resulting angle Cramer-Rao bound (CRB) and formulate a problem that minimizes its worst-case value subject to each user's signal-to-interference-plus-noise ratio (SINR) requirement under all possible position errors. By exploiting a common phase-response decomposition, we obtain tractable reformulations and develop an alternating optimization (AO) algorithm for the beamforming vectors and nominal antenna positions. Numerical results demonstrate that, compared with conventional nominal-position designs, the proposed robust scheme achieves improved communication reliability while maintaining competitive sensing accuracy under practical antenna position uncertainty.

0.13

Array Rotation in Near-Field ISAC: Communication, Detection, and Estimation Under Low-Complexity Transmit Architectures

eess.SP cs.IT ·2026-10-22 ·Marziyeh Soltani, Mark F. Flanagan
similarity 0.70
Abstract

This paper studies near-field integrated sensing and communication (ISAC) with a rotatable base-station array under an exact spherical-wave propagation model. For a general transmit covariance, we derive a Cramér--Rao bound (CRB) decomposition that separates target-side geometry from transmit-covariance-dependent terms. We then specialize the framework to two representative low-complexity architectures: a single-stream superposition architecture, and a dual-waveform split architecture design. We characterize the communication-, detection-, and estimation-optimal rotations for each architecture using the exact finite-array model. In addition, we show how a second-order approximation yields compact approximate expressions for the optimal rotation angles. We also study uncertainty in the target state used for beamforming design through a correlated Gaussian perturbation model, and derive approximations of the optimal robust rotation angles for target sensing and detection. The analysis shows that the two architectures behave differently under rotation: the single-stream design can align communication and detection tasks, whereas the dual-waveform design exhibits a direct communication--detection tradeoff and can incur a larger communication loss when sensing is prioritized. Numerical results show clear gains over a fixed array orientation, especially for range estimation, and close agreement between the approximate and exact rotation choices. Detection is less affected by target-state errors than estimation in the considered cases.

0.11

Electromagnetically Consistent Monostatic ISAC Beamforming: Mutual Coupling, Active Mismatch and Tx-Rx Leakage in Compact Dipole Arrays

eess.SP ·2026-11-05 ·Stylianos D. Asimonis, Christos Tselios, Dimitrios Tyrovolas, Ilias Politis, George K. Karagiannidis
similarity 0.68
Abstract · 6 pages, 9 figures, 2 tables. Submitted to IEEE ICC 2027

Beamforming for integrated sensing and communication (ISAC) is usually designed on ideal array manifolds with a norm constraint on the transmit signal. In a compact monostatic transceiver this hides three antenna effects: distorted embedded patterns, beam-dependent active mismatch at the power amplifiers, and transmit-to-receive leakage that raises the radar noise floor. We build a multiport scattering model of a shared-aperture dipole array directly from method-of-moments simulations and use it to formulate a Cramer-Rao bound minimizing ISAC beamformer with multiuser SINR constraints, per-port active reflection constraints and a leakage budget, solved as a semidefinite program with a one-dimensional budget search. Full-wave evaluation shows that coupling-unaware designs miss their SINR targets by up to 6.2 dB and drive amplifiers to an equivalent VSWR above 3.3 at small spacings. For spacings from 0.3 to 0.5 wavelengths, the proposed design meets all targets with an equivalent VSWR below 2 and lowers the root Cramer-Rao bound by 32 to 53 percent for 80 dB of self-interference cancellation and by a factor of 3.4 to 5.6 for 70 dB. An independent finite-difference time-domain model of the final layout in openEMS confirms that the leakage null and the ranking of the designs are preserved.

0.24

Negative Log-Shifted Gamma: A Generalized Pointing Error Model for Directional Wideband Systems

eess.SP ·2026-10-20 ·Evla S. Ahrazoglu, Ahmet C. Gul, Mehmet N. Akinci, Ibrahim Altunbas, Eylem Erdogan
similarity 0.68
Abstract

Pointing error is critical in highly directional communication systems, where even slight misalignment leads to severe received power reduction. Existing pointing error models fail to cover diverse practical scenarios due to restrictive distributional and design limitations. This paper proposes a novel pointing error model incorporating jitters, AoD/AoA estimation errors, and comprehensive design impacts, including phase shifter quantization, antenna patterns, array design, beamforming architectures, steering capabilities, and bandwidth. To accomplish this, antenna patterns are modeled for both high- and low-gain configurations. Then, the array factor's main lobe is approximated as a Gaussian beam for subarrays and superarrays, accommodating analog and digital beamforming stages in wideband systems under beam squint presence or compensation. Jitters and estimation errors are incorporated via 3D rotations, while phase shift quantization is captured through the phase excitations of the arrays. It is shown that the resulting pointing error follows a novel distribution: the negative log-shifted Gamma (NLSG). Fully characterized by only shape, scale, and location parameters, the NLSG features closed-form statistical expressions. This formulation ensures tractable mathematical manipulation, making it a practical, scalable tool for system design and analysis. Validation via normalized moment error, Jensen-Shannon divergence, and Kolmogorov-Smirnov statistics confirms exceptional accuracy, yielding values primarily below 1%, 0.02, and 0.05, respectively. Furthermore, capacity analysis has demonstrated that specific design choices are paramount for achieving optimal capacity. Finally, important guidelines for designing highly directional wideband communication systems are provided to mitigate the detrimental effects of pointing errors, thereby paving the way for robust next-generation networks.

0.33

Robust Beamforming Design for Integrated Sensing and Communications with Mutual Coupling Effect

eess.SP ·2026-08-16 ·Jieon Maeng, Kawon Han
published similarity 0.66
Abstract · 5 pages, 5 figures, submitted to IEEE Wireless Communication Letters, 2026

Integrated sensing and communications (ISAC) is a key technology for next-generation wireless networks, enabling communication and radar sensing over shared spectral and hardware resources. In practical multi-user multiple-input multiple-output (MU-MIMO) ISAC transmitters, however, mutual coupling (MC) between antenna elements distorts the array steering vector and each communication user (CU) channel, so that the sensing beampattern deviates from the desired one and the communication link to each user degrades. To address this limitation, we propose a robust MC-compensated beamforming design that guarantees both the sensing and communication performance of MU-MIMO ISAC transmitters against the residual MC error. We introduce a residual error on the MC matrix, so that a norm-bounded residual error induces both the sensing beampattern uncertainty and the communication channel uncertainty. The transmit covariance is then optimized against the worst-case of each uncertainty, minimizing the worst-case beampattern matching mean-squared error (MSE) for sensing while guaranteeing the signal-to-interference-plus-noise ratio (SINR) for each CU. Each worst-case constraint is converted into a linear matrix inequality, and the problem becomes a convex semidefinite program (SDP). Numerical results show that the proposed robust design attains both a lower sensing beampattern matching MSE and a higher communication SINR than those of the conventional designs, with an advantage that widens as the residual error grows.

0.58

Cooperative Target Localization in RIS-Enabled ISAC Systems

eess.SP ·2026-09-30 ·Rouhollah Amiri, Abdollah Ajorloo, Mohammad Mahdi Mojahedian, Ahmad Reza Hassanshahi, Fabiola Colone
similarity 0.66
Abstract

This paper develops a cooperative integrated sensing and communication (ISAC) framework in which a multi-antenna base station (BS) simultaneously localizes a target and serves multiple communication users, a subset of which is equipped with reconfigurable intelligent surfaces (RISs). The Fisher information matrix (FIM) for target positioning is derived, explicitly characterizing its dependence on the BS beamforming coefficients, RIS phase profiles, and bistatic sensing geometry. Under the stated scaling assumptions, coherent RIS phase alignment yields a Fisher-information gain that scales quadratically with the number of RIS elements, whereas independent random phases provide a linear gain in expectation. We formulate a sensing-centric joint active and passive beamforming problem that minimizes the position error bound (PEB) subject to per-user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. The resulting non-convex problem is addressed through an iterative successive convex approximation (SCA) procedure that solves a sequence of convex subproblems. We further develop a target localization estimator that fuses one direct time-of-arrival (ToA) measurement, one angle-of-arrival (AoA) measurement, and multiple RIS-assisted indirect ToA measurements. Under small measurement errors and asymptotically efficient first-stage ToA/AoA estimation, the estimator covariance approaches the Cramér--Rao bound (CRB) to first order. Numerical results validate the analytical scaling laws and demonstrate the localization gains enabled by cooperative RIS-equipped users.

0.13

Fluid Antenna Array-Enabled Near-Field ISAC: Joint Port Position Optimization and Transmit Beamforming Design

cs.IT ·2026-11-02 ·Wangqi Shi, Zhentian Zhang, Hao Jiang, Zaichen Zhang, Kin-Fai Tong
similarity 0.65
Abstract

Fluid antenna systems (FASs) have shown that activating a single port from a densely packed antenna array can yield spatial diversity comparable to that of tens of independent antennas, a property that has substantially improved communication reliability and efficiency. The fluid antenna array (FAA) extends this concept to multi-port configurations while avoiding complex multi-dimensional spatial correlation, and offers significant geometrical flexibility under a finite aperture and a limited port budget. These attributes motivate environment-adaptive array geometry for sensing in integrated sensing and communication (ISAC) systems. Although this flexibility enables adaptive array geometries that exploit near-field distance-angle information, improving multi-parameter target estimation under communication and deployment constraints remains challenging. In this paper, we propose a planar FAA-assisted near-field ISAC framework for multiuser communication and target sensing. Specifically, we derive the Fisher information matrix (FIM) and the corresponding Cramér-Rao bound (CRB) for the joint estimation of target range, zenith angle, azimuth angle, and radial velocity. Based on the derived CRB, we jointly optimize the FAA port positions and transmit beamforming to improve sensing accuracy while satisfying communication signal-to-interference-plus-noise ratio (SINR), transmit power, and physical deployment constraints. To solve the resulting non-convex problem, we develop a two-stage alternating optimization algorithm, in which transmit beamforming is optimized through semidefinite relaxation (SDR), while FAA port positions are successively optimized through discrete search and continuous refinement. Simulation results indicate that the proposed algorithm achieves favorable sensing performance while maintaining a reasonable computational cost.

0.16

Intelligent Reflecting Surface for ISAC: From Beamforming to Joint Design With Surface Orientation

eess.SP ·2026-11-07 ·Qiaoyan Peng, Qingqing Wu, Guangji Chen, Yong Zeng, Sai Huang +3 more
similarity 0.64
Abstract

Rotatable semi-passive intelligent reflecting surfaces (SIRSs) provide an additional spatial degree of freedom (DoF) by proactively adjusting the orientation, while dedicated sensors directly receive target echoes. To exploit this DoF for integrated sensing and communication (ISAC), we investigate the joint optimization of SIRS rotation, base station (BS) transmit beamforming, and SIRS phase-shifts to minimize the Cramér-Rao bound (CRB) for target's spatial-frequency estimation subject to per-user communication signal-to-interference-plus-noise ratio (SINR) constraints. We first establish an orientation-dependent system model that characterizes the effective aperture gains, based on which the CRB is derived. To gain useful insights, closed-form expressions of the beamforming and rotation designs are derived in the sensing-only and communication-only cases. For the co-located user and target case, we further characterize the condition under which the sensing-oriented rotation design also satisfies the communication requirement. In the single-user single-target case with ideal unit aperture gains, we analyze the channel correlation and its impact on ISAC performance. For the general multi-user case, an effective method based on the genetic algorithm is developed. Numerical results demonstrate the superiorities of the rotatable SIRS over the fixed-orientation SIRS and show that jointly optimizing the SIRS orientation and beamforming can improve the effective aperture gains and the correlation between communication and sensing channels.

0.24