CS Paper Radar

Negative Log-Shifted Gamma: A Generalized Pointing Error Model for Directional Wideband Systems

Evla S. Ahrazoglu, Ahmet C. Gul, Mehmet N. Akinci, Ibrahim Altunbas, Eylem Erdogan

eess.SP ·submitted 2026-10-20 12:15 UTC · v1

Abstract

Pointing error is critical in highly directional communication systems, where even slight misalignment leads to severe received power reduction. Existing pointing error models fail to cover diverse practical scenarios due to restrictive distributional and design limitations. This paper proposes a novel pointing error model incorporating jitters, AoD/AoA estimation errors, and comprehensive design impacts, including phase shifter quantization, antenna patterns, array design, beamforming architectures, steering capabilities, and bandwidth. To accomplish this, antenna patterns are modeled for both high- and low-gain configurations. Then, the array factor's main lobe is approximated as a Gaussian beam for subarrays and superarrays, accommodating analog and digital beamforming stages in wideband systems under beam squint presence or compensation. Jitters and estimation errors are incorporated via 3D rotations, while phase shift quantization is captured through the phase excitations of the arrays. It is shown that the resulting pointing error follows a novel distribution: the negative log-shifted Gamma (NLSG). Fully characterized by only shape, scale, and location parameters, the NLSG features closed-form statistical expressions. This formulation ensures tractable mathematical manipulation, making it a practical, scalable tool for system design and analysis. Validation via normalized moment error, Jensen-Shannon divergence, and Kolmogorov-Smirnov statistics confirms exceptional accuracy, yielding values primarily below 1%, 0.02, and 0.05, respectively. Furthermore, capacity analysis has demonstrated that specific design choices are paramount for achieving optimal capacity. Finally, important guidelines for designing highly directional wideband communication systems are provided to mitigate the detrimental effects of pointing errors, thereby paving the way for robust next-generation networks.

Closest papers

Nearest neighbours by meaning across the whole index.

One ISAC Array, Two Worst Cases: Hardware Impairments in Beamforming and AoA Estimation

eess.SP ·2026-11-04 ·Xuan Chen, Luc Le Magoarou
similarity 0.68
Abstract

In integrated sensing and communication (ISAC), the same base-station array beamforms toward users and estimates their angle of arrival (AoA). In this paper, we study how element-level gain, phase, and position errors affect both functions of a beam-scanning uniform linear array. Any array produces a correlation peak at the true angle, of finite height and width, surrounded by sidelobes. Impairments shift this peak, make it lower and wider, and raise the sidelobes relative to it. A single decomposition explains these three effects: the gain-weighted least-squares fit of the per-antenna phase errors splits them into a tilt, which shifts the peak, and a residual, whose power is taken from the peak and redistributed over the sidelobes according to its spatial spectrum. A beam steered toward the strongest direction suffers from the lower peak only, whereas the AoA estimate suffers from its shift even without noise, and also from the lowering and sidelobes with noise. The worst cases for the two ISAC functions are thus nearly disjoint, and we characterize both: the worst case for beamforming leaves the AoA estimate unbiased, and the worst case for localization loses little beamforming gain. The worst case for localization is a single defect at the junction between two subarrays, and its error, relative to the main-lobe width, does not decrease with the number of antennas. We also characterize random impairments and the effect of noise. In practical terms, our analysis shows that the calibration of a dual-function array must be assessed with respect to both functions.

0.23

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

cs.IT ·2026-10-25 ·Jingyuan Xu, Yuanhui Wu, Zhentian Zhang, Zaichen Zhang, Tuo Wu +4 more
similarity 0.59
Abstract · 12 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

0.30

Characterization of Beam-Squint and Beam-Split Effects in RIS-assisted Multi-Frequency Networks

eess.SP ·2026-09-07 ·Mohammad Amin Saeidi, Hina Tabassum
top venue similarity 0.59
Abstract · This paper has been accepted for publication in IEEE journals

Multi-frequency operation in beyond-5G and 6G systems renders the beam directions of large-aperture arrays frequency-dependent, giving rise to beam misalignment effects critical for reconfigurable intelligent surfaces (RISs). When an RIS phase profile is configured at one frequency but illuminated at another, the reflected field may exhibit main-lobe deviation and additional dominant lobes, degrading beamforming performance. In this paper, we develop a unified analytical framework to characterize these effects for uniform planar array-based RISs under both continuous and finite-resolution phase control. We formalize beam-squint as the deviation of the maximum-gain beam from the desired elevation-azimuth angle pair and beam-split as the emergence of additional maximum-gain beams under frequency mismatch and quantization. For continuous-phase RISs, we derive necessary and sufficient peak conditions, obtain closed-form elevation-azimuth peak families, and establish feasibility conditions as functions of the frequency ratio, incidence and configuration angles, and element spacing. Extending the analysis to b-bit phase quantization, we express the quantized beampattern as a superposition of harmonic array responses via Fourier expansion of the quantization-error phasor, leading to closed-form per-harmonic peak families, dominance ordering, and feasibility conditions. To capture peak displacement induced by harmonic superposition, we further develop a perturbation-based correction leveraging dominant-harmonic curvature and residual-harmonic gradients, improving peak-location accuracy without exhaustive two-dimensional searches. Numerical simulations validate the analysis, quantify peak deviations and beam-split probabilities, and demonstrate sum-rate gains by including analytically predicted squinted/split and harmonic candidates in multi-RIS, multi-user, multi-band networks.

0.44

Robust Beamforming and Antenna Position Optimization for MA-Assisted ISAC with Imperfectly Positioned MAs

eess.SP ·2026-09-20 ·Zeyuan Zhang, Ning Wei, Ahmad Bazzi, Boyang Jia, Huimin Tang +2 more
similarity 0.58
Abstract

This paper investigates robust beamforming and antenna position design for movable antenna (MA)-enabled integrated sensing and communication (ISAC) systems under antenna position errors. In particular, deviations between the actual and nominal antenna positions in practical MA arrays are inevitable due to limited mechanical accuracy. Therefore, the conventional ISAC design based on nominal positions may suffer from substantial performance degradation. To address this issue, we consider a monostatic downlink MA-ISAC system in which each transmission frame consists of a low-power pilot and an ISAC payload. The target angle, reflection coefficient, and antenna position-error vector are jointly estimated based on these two observations, thereby enabling sensing with imperfectly known antenna positions. We derive the resulting angle Cramer-Rao bound (CRB) and formulate a problem that minimizes its worst-case value subject to each user's signal-to-interference-plus-noise ratio (SINR) requirement under all possible position errors. By exploiting a common phase-response decomposition, we obtain tractable reformulations and develop an alternating optimization (AO) algorithm for the beamforming vectors and nominal antenna positions. Numerical results demonstrate that, compared with conventional nominal-position designs, the proposed robust scheme achieves improved communication reliability while maintaining competitive sensing accuracy under practical antenna position uncertainty.

0.13

Array Rotation in Near-Field ISAC: Communication, Detection, and Estimation Under Low-Complexity Transmit Architectures

eess.SP cs.IT ·2026-10-22 ·Marziyeh Soltani, Mark F. Flanagan
similarity 0.57
Abstract

This paper studies near-field integrated sensing and communication (ISAC) with a rotatable base-station array under an exact spherical-wave propagation model. For a general transmit covariance, we derive a Cramér--Rao bound (CRB) decomposition that separates target-side geometry from transmit-covariance-dependent terms. We then specialize the framework to two representative low-complexity architectures: a single-stream superposition architecture, and a dual-waveform split architecture design. We characterize the communication-, detection-, and estimation-optimal rotations for each architecture using the exact finite-array model. In addition, we show how a second-order approximation yields compact approximate expressions for the optimal rotation angles. We also study uncertainty in the target state used for beamforming design through a correlated Gaussian perturbation model, and derive approximations of the optimal robust rotation angles for target sensing and detection. The analysis shows that the two architectures behave differently under rotation: the single-stream design can align communication and detection tasks, whereas the dual-waveform design exhibits a direct communication--detection tradeoff and can incur a larger communication loss when sensing is prioritized. Numerical results show clear gains over a fixed array orientation, especially for range estimation, and close agreement between the approximate and exact rotation choices. Detection is less affected by target-state errors than estimation in the considered cases.

0.11

Self-Calibration DOA Estimation for Moving Dilated Arrays with Gain and Phase Errors

eess.SP ·2026-10-09 ·Kaiyuan Fang, Chengzhi Ye, Ruoyu Zhang, Shichao Wei, Wen Wu
similarity 0.56
Abstract

Moving dilated arrays (MDAs) can increase the uniform degrees of freedom (uDOFs) while alleviating mutual coupling, but their performance is susceptible to unknown gain and phase errors (GPEs). To deal with this problem, we investigate self-calibration direction-of-arrival (DOA) estimation for MDAs with unknown GPEs. First, multi-position observations are phase aligned to construct an equivalent virtual array with an enlarged aperture. Next, the motion-induced relationships among the GPEs are exploited to establish explicit calibration constraints. By leveraging the orthogonality between the steering vectors and the noise subspace, the joint estimation of the DOAs and GPEs is formulated as a constrained optimization problem. To solve this problem, a two-stage alternating optimization (AO) algorithm is developed. In the first stage, the GPEs are estimated in closed form with the DOAs fixed. In the second stage, the estimated GPEs are used to calibrate the covariance matrix, after which the DOAs are refined using the multiple signal classification (MUSIC) algorithm. To obtain reliable initial estimates, a rotational invariance-like (RIL) initialization method is further developed by exploiting two translated virtual subarrays with identical GPEs. Furthermore, the Cramer-Rao bound (CRB) is derived to characterize the theoretical performance limit of the considered system. Simulation results demonstrate that the proposed method converges reliably and achieves accurate DOA estimation under different array apertures, numbers of snapshots, GPE levels, and numbers of sources.

0.22

When Every Bit Counts in Quantized Beamforming: From CSI Feedback to Low-Resolution Hardware

eess.SP ·2026-10-20 ·Yasaman Khorsandmanesh, Parisa Ramezani, Emil Bjornson
similarity 0.56
Abstract

Multiple-input multiple-output (MIMO) is a key technology in modern wireless networks, but its performance is often analyzed under ideal hardware assumptions. In practical implementations, however, quantization appears throughout the signal-processing chain, including channel state information (CSI) feedback, fronthaul signaling, beamforming coefficients, data converters, and finite-resolution phase shifters. These impairments do not act independently: they alter the channel information available for beamforming, constrain the feasible transmit signals, and can ultimately limit beamforming gain and interference suppression. This article provides a perspective on quantized beamforming by connecting its main sources, performance implications, and mitigation strategies. We discuss codebook-based CSI feedback, quantization-aware beamforming, low-resolution converter modeling, and finite-resolution hybrid beamforming, and use representative numerical examples to illustrate when quantization becomes a dominant performance bottleneck. We further highlight emerging directions in joint beamforming and quantization design, adaptive-resolution architectures, and new antenna technologies with discrete hardware constraints. The key message is that finite-resolution effects should be modeled explicitly and incorporated into the beamforming design rather than treated as an afterthought.

0.20

Electromagnetically Consistent Monostatic ISAC Beamforming: Mutual Coupling, Active Mismatch and Tx-Rx Leakage in Compact Dipole Arrays

eess.SP ·2026-11-05 ·Stylianos D. Asimonis, Christos Tselios, Dimitrios Tyrovolas, Ilias Politis, George K. Karagiannidis
similarity 0.55
Abstract · 6 pages, 9 figures, 2 tables. Submitted to IEEE ICC 2027

Beamforming for integrated sensing and communication (ISAC) is usually designed on ideal array manifolds with a norm constraint on the transmit signal. In a compact monostatic transceiver this hides three antenna effects: distorted embedded patterns, beam-dependent active mismatch at the power amplifiers, and transmit-to-receive leakage that raises the radar noise floor. We build a multiport scattering model of a shared-aperture dipole array directly from method-of-moments simulations and use it to formulate a Cramer-Rao bound minimizing ISAC beamformer with multiuser SINR constraints, per-port active reflection constraints and a leakage budget, solved as a semidefinite program with a one-dimensional budget search. Full-wave evaluation shows that coupling-unaware designs miss their SINR targets by up to 6.2 dB and drive amplifiers to an equivalent VSWR above 3.3 at small spacings. For spacings from 0.3 to 0.5 wavelengths, the proposed design meets all targets with an equivalent VSWR below 2 and lowers the root Cramer-Rao bound by 32 to 53 percent for 80 dB of self-interference cancellation and by a factor of 3.4 to 5.6 for 70 dB. An independent finite-difference time-domain model of the final layout in openEMS confirms that the leakage null and the ranking of the designs are preserved.

0.24