CS Paper Radar

When Every Bit Counts in Quantized Beamforming: From CSI Feedback to Low-Resolution Hardware

Yasaman Khorsandmanesh, Parisa Ramezani, Emil Bjornson

eess.SP ·submitted 2026-10-20 09:37 UTC · v1

Abstract

Multiple-input multiple-output (MIMO) is a key technology in modern wireless networks, but its performance is often analyzed under ideal hardware assumptions. In practical implementations, however, quantization appears throughout the signal-processing chain, including channel state information (CSI) feedback, fronthaul signaling, beamforming coefficients, data converters, and finite-resolution phase shifters. These impairments do not act independently: they alter the channel information available for beamforming, constrain the feasible transmit signals, and can ultimately limit beamforming gain and interference suppression. This article provides a perspective on quantized beamforming by connecting its main sources, performance implications, and mitigation strategies. We discuss codebook-based CSI feedback, quantization-aware beamforming, low-resolution converter modeling, and finite-resolution hybrid beamforming, and use representative numerical examples to illustrate when quantization becomes a dominant performance bottleneck. We further highlight emerging directions in joint beamforming and quantization design, adaptive-resolution architectures, and new antenna technologies with discrete hardware constraints. The key message is that finite-resolution effects should be modeled explicitly and incorporated into the beamforming design rather than treated as an afterthought.

Closest papers

Nearest neighbours by meaning across the whole index.

Finite-Resolution Microwave Linear Analog Computer (MiLAC)-Aided Multiuser Beamforming

eess.SP cs.IT ·2026-09-28 ·Zheyu Wu, Bruno Clerckx
theory similarity 0.67
Abstract · 16 pages, 7 figures, submitted to IEEE for possible publication

Large-scale antenna arrays are essential to future wireless networks but impose significant hardware and digital-processing burdens. The microwave linear analog computer (MiLAC) offers a promising architecture for addressing these challenges. In a MiLAC, beamforming is realized entirely in the analog domain through a reconfigurable multiport microwave network comprising tunable admittance elements. However, existing studies assume that these elements are continuously tunable, whereas practical implementations can support only finitely many configurable states. This paper investigates finite-resolution MiLAC-aided multiuser beamforming under lossless and reciprocal constraints with prescribed connectivity patterns. Each tunable susceptance is selected from a symmetric uniform finite-resolution codebook. We formulate an online problem that jointly optimizes the discrete susceptances and power allocation for a prescribed codebook, and an offline problem that designs the codebook based on channel statistics. By exploiting the odd-uniform codebook structure, we express each multilevel susceptance as a weighted sum of two-level variables and develop exact continuous penalty models for both the online beamforming and offline codebook design problems. We prove that, for sufficiently large penalty parameters, these penalty models are globally equivalent to their original discrete counterparts. Building on these formulations, we develop efficient ADMM-based algorithms for solving the two problems. Numerical results demonstrate that the performance of an unquantized fully-connected MiLAC can be approached with substantially reduced connectivity and finite resolution. In particular, a 3-bit stem-connected MiLAC achieves more than 95% of the sum-rate performance of the unquantized fully-connected MiLAC while requiring only 22% of its tunable components.

0.42

Robust Beamforming and Power Allocation for Coherent Cell-Free Massive MIMO with Residual Calibration Errors

eess.SP ·2026-08-11 ·Mingjun Sun, Xidong Mu, Shaochuan Wu, Chongjun Ouyang, Hyundong Shin
similarity 0.65
Abstract

This paper investigates robust downlink transmission to tolerate calibration aging in time-division duplex cell-free massive multiple-input multiple-output (CF-mMIMO) systems with residual calibration errors (RCEs). Unlike existing studies that typically treat RCEs as static impairments, we develop a time-evolving RCE model that characterizes the joint effects of residual phase mismatches, residual carrier frequency offsets, and oscillator phase noise. Based on this model, two practical processing architectures are considered: instantaneous calibrated-channel-based robust beamforming (BF) and statistical beamformed-channel-based robust power allocation (PA). For both architectures, tractable achievable rate lower bounds are derived, which explicitly reveal the impact of calibration aging on coherent combining, BF-gain uncertainty, and inter-user interference. Using these lower bounds as design metrics, we formulate an effective weighted sum-rate (EWSR) maximization problem over the data transmission interval, so that the resulting BF and PA designs can account for the temporal evolution of RCEs rather than a single calibrated instant. To efficiently solve the resulting problems, a Gauss--Legendre quadrature-based weighted minimum mean square error (WMMSE) optimization framework is developed, where both robust BF and PA are updated in an access point (AP)-block manner with closed-form solutions under per-AP power constraints. Simulation results demonstrate that: i) the proposed algorithms exhibit stable convergence; ii) the proposed robust BF and PA schemes achieve higher EWSR by explicitly accounting for calibration aging than their non-robust counterparts; and iii) robust BF achieves higher spectral efficiency (SE), whereas robust PA provides a more favorable tradeoff between SE and implementation cost in terms of computational complexity and fronthaul overhead.

0.04

Codebook-Based Effective CSI Feedback for Precoding Design in MIMO Systems

eess.SP ·2026-09-23 ·Bikshapathi Gouda, Antti Arvola, Juha Karjalainen, Sami Hakola, Antti Tölli
similarity 0.63
Abstract · Submitted to IEEE TWC

Downlink multi-user multiple-input multiple-output (MIMO) precoding with limited channel state information (CSI) feedback in multi-cell systems is studied. Conventional codebook-based CSI feedback compresses the UE-specific physical channels, which leaves an inherent mismatch between the base-station (BS) precoders and the interference-aware UE combiners. To address this limitation, an effective CSI (ECSI) feedback framework is proposed in which UEs compute their linear combiners from precoded downlink pilots, construct corresponding post-combining effective channels, and report compact quantized representations using the same payload structure as in conventional schemes. The BS reconstructs the effective CSI and iteratively refines its precoders through over-the-air signaling without incurring additional downlink overhead. Analytical expressions are derived to characterize the effective-channel estimation error under both conventional CSI and ECSI feedback, explicitly capturing the impact of beam selection and rank truncation. Simulations demonstrate fast convergence within a few iterations and up to 30\% average sum-rate improvement over conventional CSI-based precoding, with gains reaching 100\% at the 10th percentile of per-stream rates in interference-limited conditions.

0.29

Two-Layer Microwave Linear Analog Computer (MiLAC)-Aided Multi-User MIMO Networks

eess.SP ·2026-10-28 ·Xiaohua Zhou, Tianyu Fang, Matteo Nerini, Yijie Mao, Bruno Clerckx
theory similarity 0.63
Abstract

Microwave linear analog computer (MiLAC)-aided beamforming, which performs signal processing directly in the analog domain, has recently emerged as a promising alternative to fully digital and hybrid beamforming for multi-antenna systems. However, existing studies have shown that a single lossless and reciprocal MiLAC at the transmitter cannot, in general, attain the performance of fully digital beamforming in multi-user scenarios. To overcome this limitation, we propose a two-layer MiLAC-aided transmit beamforming architecture for downlink multi-user multiple-input multiple-output (MIMO) networks. Leveraging multiport microwave network theory, we first establish a general physics-compliant model of the proposed architecture, and then derive a simplified model under the assumptions of unilateral and perfectly matched amplifiers. We prove that, with lossless and reciprocal MiLACs, the two-layer MiLAC-aided transmitter can realize any fully digital transmit beamformer, while a single-layer MiLAC-aided receiver can attain the same achievable rate as a fully digital linear combiner. We then derive closed-form mappings from fully digital transmit beamformers and receive combiners to their corresponding MiLAC-aided analog implementations. Based on these equivalence results, we formulate a sum-rate maximization problem for the considered multi-user MIMO network and develop an optimization framework for jointly designing the power allocation and scattering matrices of the MiLAC-aided transceivers. Numerical results validate the theoretical analysis and show that the proposed two-layer MiLAC-aided design attains the same sum-rate performance as its fully digital counterpart.

0.21

Spectral Efficiency Analysis of Massive MIMO-OFDM Systems with Double Quantization

cs.IT ·2026-10-07 ·Bengu Bilgic Keskin, A. Oguz Kislal, Ali Gorcin, Özlem Tuğfe Demir
similarity 0.62
Abstract

Massive multiple-input multiple-output (MIMO) achieves a high spectral efficiency (SE) by employing a large number of receive antennas in the uplink. Employing many receive antennas requires a large number of analog-to-digital converters (ADCs) and a high fronthaul data rate. Low-resolution ADCs can reduce power consumption and cost, while fronthaul quantization can reduce the required fronthaul data rate, at the expense of quantization distortion at both stages. In wideband orthogonal frequency-division multiplexing systems, ADC quantization is performed in the time domain, while fronthaul quantization may be applied after the discrete Fourier transform to transmit only active subcarriers. In this study, we investigate the achievable uplink SE over fronthaul links under double quantization and imperfect channel estimation. We derive a linear minimum mean-squared error channel estimator from the double-quantized pilot observations and obtain an achievable SE using the use-and-then-forget bound. Numerical results demonstrate that the ADC and fronthaul quantization resolutions have comparable impacts on the achievable SE. When the two resolutions differ, the lower resolution becomes the dominant factor limiting the SE. Furthermore, our numerical results show that six-bit ADC and fronthaul quantization achieve more than 90% of the SE attained in the ideal case.

0.21

MiLAC-Aided Beamforming for MIMO Over-the-Air Computation

cs.IT ·2026-08-13 ·Yaru Wang, Deyou Zhang, Qingchao Li, Jun Liu, Chuang Shi
similarity 0.62
Abstract

Over-the-air computation (AirComp) enables low-latency wireless data aggregation, but its accuracy is limited by imperfect signal alignment over fading channels and receiver noise. Fully digital beamforming improves aggregation accuracy in multiple-input multiple-output (MIMO) AirComp systems but requires one radio-frequency (RF) chain per antenna. To reduce this hardware burden, we investigate microwave linear analog computer (MiLAC)-aided beamforming for MIMO AirComp. Under a lossless and reciprocal MiLAC model, we jointly optimize the transmit digital precoding matrices and the receive-side MiLAC aggregation matrix to minimize the mean squared error (MSE). An alternating optimization algorithm is developed, in which the precoding matrices are optimally updated using the Karush--Kuhn--Tucker conditions and bisection, while the resulting convex aggregation matrix subproblem is solved globally using projected gradient descent. Numerical results verify the algorithm's convergence and demonstrate that MiLAC-aided beamforming approaches the MSE performance of fully digital beamforming with substantially fewer RF chains and outperforms phase-shifter-based hybrid beamforming under the same RF-chain budget.

0.04

An Efficient SIM Beamforming Scheme Based on Physical-Empowered Projected Gradient

eess.SP ·2026-10-29 ·Yuzhi Yang, Hao Liu, Tianhao Guo, Jiancheng An, Lu Gan +2 more
similarity 0.61
Abstract · under review by ieee trans

Stacked Intelligent Metasurfaces (SIMs) have emerged as a promising technology for next-generation wireless systems. Especially in multi-input multi-output (MIMO) systems, it has the potential to realize complicated wave-domain transformations with low hardware costs and energy consumption. However, SIM-assisted MIMO systems face two major challenges in channel estimation and beamforming. As the SIM elements do not have the signal processing capability, channel estimation can only be conducted in an indirect manner, which makes it challenging. Moreover, the precoding optimization after channel estimation is non-convex and also difficult. Targeting these issues, we exploit the time-division duplex (TDD) channel reciprocity to calculate the gradient backpropagation in an over-the-air manner. Based on this structure, we propose a gradient-based optimization framework that optimizes beamforming without explicitly estimating the SIM--UE channel. The proposed method, namely the physical projected gradient descent (P2GD) method, optimizes the achievable sum rate while incorporating zero-forcing (ZF) constraints. Based on the method of incorporating the ZF restriction, we propose two variations of P2GD, namely user equipment (UE)-P2GD and base station (BS)-P2GD. We also provide a theoretical convergence analysis and projected gradient techniques to ensure physical feasibility. Simulation results show that the proposed approach can achieve suboptimal beamforming in the multi-user system within a small number of over-the-air iterations, using a per-direction signaling budget below the pilot cost of explicit SIM--UE channel estimation. The proposed method provides a low-overhead beamforming scheme for SIM systems without explicit SIM--UE channel estimation.

0.48

Fronthaul-Efficient Cell-Free Massive MIMO via Stream-Adaptive Resolution Control

cs.IT eess.SP ·2026-08-12 ·Özlem Tuğfe Demir, Sinan Gezici
published similarity 0.61
Abstract · 5 pages, 2 figures, to be presented at IEEE SPAWC 2026

We consider the uplink of a fronthaul-constrained cell-free massive MIMO system with a single multi-antenna user equipment (UE) transmitting multiple spatial streams to distributed access points (APs). Due to heterogeneous channel conditions and limited fronthaul capacity, uniform-resolution quantization across APs and streams is highly inefficient. To address this, we propose a stream- and AP-adaptive resolution control framework that jointly optimizes the transmit power and per-AP per-stream quantization resolutions. By leveraging a distributed implementation of singular-value decomposition (SVD)-based processing, the data streams are decoupled at the APs, enabling flexible fronthaul compression across both spatial streams and APs. The resulting non-convex optimization problem is tackled using a weighted minimum mean-squared error (WMMSE)-based block coordinate descent algorithm with semi-closed-form updates.

0.21