CS Paper Radar

Finite-Resolution Microwave Linear Analog Computer (MiLAC)-Aided Multiuser Beamforming

Zheyu Wu, Bruno Clerckx

eess.SP cs.IT ·submitted 2026-09-28 14:05 UTC · v1
theory

Abstract

Large-scale antenna arrays are essential to future wireless networks but impose significant hardware and digital-processing burdens. The microwave linear analog computer (MiLAC) offers a promising architecture for addressing these challenges. In a MiLAC, beamforming is realized entirely in the analog domain through a reconfigurable multiport microwave network comprising tunable admittance elements. However, existing studies assume that these elements are continuously tunable, whereas practical implementations can support only finitely many configurable states. This paper investigates finite-resolution MiLAC-aided multiuser beamforming under lossless and reciprocal constraints with prescribed connectivity patterns. Each tunable susceptance is selected from a symmetric uniform finite-resolution codebook. We formulate an online problem that jointly optimizes the discrete susceptances and power allocation for a prescribed codebook, and an offline problem that designs the codebook based on channel statistics. By exploiting the odd-uniform codebook structure, we express each multilevel susceptance as a weighted sum of two-level variables and develop exact continuous penalty models for both the online beamforming and offline codebook design problems. We prove that, for sufficiently large penalty parameters, these penalty models are globally equivalent to their original discrete counterparts. Building on these formulations, we develop efficient ADMM-based algorithms for solving the two problems. Numerical results demonstrate that the performance of an unquantized fully-connected MiLAC can be approached with substantially reduced connectivity and finite resolution. In particular, a 3-bit stem-connected MiLAC achieves more than 95% of the sum-rate performance of the unquantized fully-connected MiLAC while requiring only 22% of its tunable components.

Comment
16 pages, 7 figures, submitted to IEEE for possible publication

Closest papers

Nearest neighbours by meaning across the whole index.

Frequency-Dependent Hybrid Digital and Microwave Linear Analog Computer (MiLAC) Beamforming for Multiuser MIMO-OFDM Systems

eess.SP ·2026-10-25 ·Yiyang Peng, Zheyu Wu, Bruno Clerckx
similarity 0.72
Abstract

Microwave linear analog computing (MiLAC) has recently emerged as a promising approach for reducing the hardware and digital-processing requirements of large-scale multiple-input multiple-output (MIMO) systems. In narrowband multiuser systems, hybrid digital-MiLAC beamforming can achieve digital beamforming flexibility with only as many radio-frequency (RF) chains as data streams. However, extending this advantage to wideband systems is nontrivial because practical MiLAC circuits exhibit frequency-dependent responses. In this paper, we investigate hybrid digital-MiLAC beamforming for multiuser MISO-OFDM systems with a frequency-dependent MiLAC circuit model. We characterize the frequency dependence of MiLAC by relating the susceptance of each tunable component across subcarriers to its center-frequency value. Under this frequency coupling, we show that a single MiLAC circuit generally cannot simultaneously match the desired beamforming directions across all subcarriers, highlighting the essential role of subcarrier-dependent digital precoding. We then develop a block coordinate descent (BCD) algorithm to jointly optimize the digital and MiLAC beamformers for average sum-rate maximization. In particular, an efficient alternating direction method of multipliers (ADMM) algorithm is custom-designed to handle the frequency-coupled circuit constraints in the MiLAC beamformer subproblem. Simulation results show that the proposed hybrid digital-MiLAC design outperforms conventional hybrid digital-analog beamforming, particularly when fewer RF chains are available and the channel is more frequency-selective. With $64$ transmit antennas and $4$ data streams, it attains $96.3\%$ of the digital sum-rate using only $8$ RF chains. Furthermore, under highly frequency-selective channels and using $4$ RF chains, it provides a $48\%$ sum-rate gain over the conventional hybrid design.

0.39

Two-Layer Microwave Linear Analog Computer (MiLAC)-Aided Multi-User MIMO Networks

eess.SP ·2026-10-28 ·Xiaohua Zhou, Tianyu Fang, Matteo Nerini, Yijie Mao, Bruno Clerckx
theory similarity 0.71
Abstract

Microwave linear analog computer (MiLAC)-aided beamforming, which performs signal processing directly in the analog domain, has recently emerged as a promising alternative to fully digital and hybrid beamforming for multi-antenna systems. However, existing studies have shown that a single lossless and reciprocal MiLAC at the transmitter cannot, in general, attain the performance of fully digital beamforming in multi-user scenarios. To overcome this limitation, we propose a two-layer MiLAC-aided transmit beamforming architecture for downlink multi-user multiple-input multiple-output (MIMO) networks. Leveraging multiport microwave network theory, we first establish a general physics-compliant model of the proposed architecture, and then derive a simplified model under the assumptions of unilateral and perfectly matched amplifiers. We prove that, with lossless and reciprocal MiLACs, the two-layer MiLAC-aided transmitter can realize any fully digital transmit beamformer, while a single-layer MiLAC-aided receiver can attain the same achievable rate as a fully digital linear combiner. We then derive closed-form mappings from fully digital transmit beamformers and receive combiners to their corresponding MiLAC-aided analog implementations. Based on these equivalence results, we formulate a sum-rate maximization problem for the considered multi-user MIMO network and develop an optimization framework for jointly designing the power allocation and scattering matrices of the MiLAC-aided transceivers. Numerical results validate the theoretical analysis and show that the proposed two-layer MiLAC-aided design attains the same sum-rate performance as its fully digital counterpart.

0.21

Finite-Aperture Modeling of Pattern-Reconfigurable Antennas for Multiuser Beamforming

eess.SP ·2026-10-07 ·Kangjian Chen, Han Qing Yang, Hang Wong
similarity 0.70
Abstract · 14 pages, 11 figures; submitted to IEEE for possible publication

This paper establishes a finite-aperture model for pattern-reconfigurable antennas (PRAs) and exploits its aperture-constrained Fourier representation to develop an efficient multiuser beamforming framework. First, we develop an ideal model by representing the complex radiation pattern using a Fourier series. By applying the Jacobi-Anger expansion, we relate the antenna aperture to the effective Fourier order and derive aperture-dependent power bounds for individual Fourier coefficients. Second, we employ a practical multiport network model and design three representative reconfigurable pixel antennas to verify the predicted effective Fourier orders and per-order power constraints. We then formulate weighted sum-rate maximization for multiuser downlink transmission under both models. Using bounded Fourier coefficients as auxiliary variables, we develop a coefficient-bound penalty-based weighted minimum mean-square error algorithm that separates continuous beamforming from discrete switch-state optimization. We further propose a one-bit neighborhood search that exploits the Sherman-Morrison identity to accelerate the discrete optimization. Simulation results validate the physical relevance of the ideal model and demonstrate multiuser sum-rate gains and reduced optimization runtime for densely switched antennas. The proposed model provides a physically grounded basis for PRA-enabled communication analysis and design, while the framework accommodates different beamforming objectives and PRA implementations.

0.32

MiLAC-Aided Beamforming for MIMO Over-the-Air Computation

cs.IT ·2026-08-13 ·Yaru Wang, Deyou Zhang, Qingchao Li, Jun Liu, Chuang Shi
similarity 0.70
Abstract

Over-the-air computation (AirComp) enables low-latency wireless data aggregation, but its accuracy is limited by imperfect signal alignment over fading channels and receiver noise. Fully digital beamforming improves aggregation accuracy in multiple-input multiple-output (MIMO) AirComp systems but requires one radio-frequency (RF) chain per antenna. To reduce this hardware burden, we investigate microwave linear analog computer (MiLAC)-aided beamforming for MIMO AirComp. Under a lossless and reciprocal MiLAC model, we jointly optimize the transmit digital precoding matrices and the receive-side MiLAC aggregation matrix to minimize the mean squared error (MSE). An alternating optimization algorithm is developed, in which the precoding matrices are optimally updated using the Karush--Kuhn--Tucker conditions and bisection, while the resulting convex aggregation matrix subproblem is solved globally using projected gradient descent. Numerical results verify the algorithm's convergence and demonstrate that MiLAC-aided beamforming approaches the MSE performance of fully digital beamforming with substantially fewer RF chains and outperforms phase-shifter-based hybrid beamforming under the same RF-chain budget.

0.04

When Every Bit Counts in Quantized Beamforming: From CSI Feedback to Low-Resolution Hardware

eess.SP ·2026-10-20 ·Yasaman Khorsandmanesh, Parisa Ramezani, Emil Bjornson
similarity 0.67
Abstract

Multiple-input multiple-output (MIMO) is a key technology in modern wireless networks, but its performance is often analyzed under ideal hardware assumptions. In practical implementations, however, quantization appears throughout the signal-processing chain, including channel state information (CSI) feedback, fronthaul signaling, beamforming coefficients, data converters, and finite-resolution phase shifters. These impairments do not act independently: they alter the channel information available for beamforming, constrain the feasible transmit signals, and can ultimately limit beamforming gain and interference suppression. This article provides a perspective on quantized beamforming by connecting its main sources, performance implications, and mitigation strategies. We discuss codebook-based CSI feedback, quantization-aware beamforming, low-resolution converter modeling, and finite-resolution hybrid beamforming, and use representative numerical examples to illustrate when quantization becomes a dominant performance bottleneck. We further highlight emerging directions in joint beamforming and quantization design, adaptive-resolution architectures, and new antenna technologies with discrete hardware constraints. The key message is that finite-resolution effects should be modeled explicitly and incorporated into the beamforming design rather than treated as an afterthought.

0.20

Energy Efficiency in Microwave Linear Analog Computer (MiLAC)-Enabled Communications

eess.SP ·2026-08-31 ·Ahmed Magbool, Marco Di Renzo
similarity 0.66
Abstract · Submitted to the IEEE for possible publication

Microwave linear analog computers (MiLACs) have emerged as a promising architecture for energy-efficient wireless communications by shifting signal processing from the digital to the analog domain using tunable impedance networks. Several MiLAC architectures have recently been proposed, including the single-layer MiLAC (SLM), two-layer MiLAC (TLM), and hybrid digital-MiLAC (HDM). In this paper, we investigate the energy efficiency (EE) of these architectures. Specifically, we formulate EE maximization problems for the SLM, TLM, and HDM architectures under transmit power, user rate, and architecture-specific constraints, and develop a dimensionality reduction technique with successive convex approximation (SCA)-based algorithms to efficiently solve the resulting non-convex problems. We further derive a computationally efficient solution for EE maximization based on a search over only $(K+1)$ closed-form candidate solutions, where $K$ is the number of users, and analyze the asymptotic EE in the large-antenna regime under negligible quantization noise. Our analysis shows that the EE of the SLM, TLM, and HDM architectures scales as $\ln(N)/N^2$, whereas conventional digital beamforming (DBF) scales as $\ln(N)/N$, where $N$ denotes the number of transmit antennas. Despite these different scaling laws, the faster EE decay of MiLAC-based architectures becomes relevant only at very large antenna dimensions, typically involving thousands of antennas, while they maintain superior EE over practically relevant finite antenna regimes. Finally, we derive an approximation of the number of antennas required to achieve the maximum EE for each architecture and the corresponding EE. Simulation results show that, over practically relevant antenna regimes, MiLAC-based architectures achieve substantially higher EE than conventional fully digital and hybrid analog-digital beamforming.

0.42

An Efficient SIM Beamforming Scheme Based on Physical-Empowered Projected Gradient

eess.SP ·2026-10-29 ·Yuzhi Yang, Hao Liu, Tianhao Guo, Jiancheng An, Lu Gan +2 more
similarity 0.64
Abstract · under review by ieee trans

Stacked Intelligent Metasurfaces (SIMs) have emerged as a promising technology for next-generation wireless systems. Especially in multi-input multi-output (MIMO) systems, it has the potential to realize complicated wave-domain transformations with low hardware costs and energy consumption. However, SIM-assisted MIMO systems face two major challenges in channel estimation and beamforming. As the SIM elements do not have the signal processing capability, channel estimation can only be conducted in an indirect manner, which makes it challenging. Moreover, the precoding optimization after channel estimation is non-convex and also difficult. Targeting these issues, we exploit the time-division duplex (TDD) channel reciprocity to calculate the gradient backpropagation in an over-the-air manner. Based on this structure, we propose a gradient-based optimization framework that optimizes beamforming without explicitly estimating the SIM--UE channel. The proposed method, namely the physical projected gradient descent (P2GD) method, optimizes the achievable sum rate while incorporating zero-forcing (ZF) constraints. Based on the method of incorporating the ZF restriction, we propose two variations of P2GD, namely user equipment (UE)-P2GD and base station (BS)-P2GD. We also provide a theoretical convergence analysis and projected gradient techniques to ensure physical feasibility. Simulation results show that the proposed approach can achieve suboptimal beamforming in the multi-user system within a small number of over-the-air iterations, using a per-direction signaling budget below the pilot cost of explicit SIM--UE channel estimation. The proposed method provides a low-overhead beamforming scheme for SIM systems without explicit SIM--UE channel estimation.

0.48

Sparse Rotatable Arrays (SRAs) for Cell-Free MIMO: Network-Wide Design of Antenna Activation and Panel Orientation

cs.IT ·2026-11-15 ·Ailing Zheng, Qingqing Wu, Xiyuan Liu, Wei Feng, Wen Chen +1 more
benchmark similarity 0.63
Abstract

This paper investigates a sparse rotatable array (SRA)-enabled cell-free multiuser multiple-input multiple-output (MIMO) system. Under a network-wide antenna activation budget, distributed access points (APs) select active antenna elements from their installed arrays and adjust panel orientations, enabling joint control of sparse array apertures and antenna directivity. To avoid frequent hardware reconfiguration in response to instantaneous channel variations, we formulate a two-timescale stochastic optimization problem to maximize the expected minimum-user rate. Long-term antenna activation and panel orientations are optimized based on user spatial distributions and statistical channel state information (CSI), while short-term precoders adapt to instantaneous CSI. Under line-of-sight (LoS) propagation, we derive the optimal single-user antenna allocation, characterize the two-user max-min signal-to-interference-plus-noise ratio (SINR) and establish conditions for discrete activation and panel rotation to attain the continuous-position benchmark, and obtain a closed-form multi-AP zero-forcing (ZF) allocation benchmark under a continuous antenna-count relaxation. For the general mixed-integer nonconvex stochastic problem, we develop an alternating algorithm based on sample-average approximation (SAA), integrating uplink-downlink (UL-DL) duality for short-term precoding, weighted minimum mean-square error (WMMSE) surrogates for panel-orientation optimization, and multi-start greedy search for antenna activation. Numerical results demonstrate that the proposed design outperforms the fixed-array benchmark, improves all-user service reliability with fewer active antennas, and adapts effectively to nonuniform user spatial distributions.

0.23