CS Paper Radar

Frequency-Dependent Hybrid Digital and Microwave Linear Analog Computer (MiLAC) Beamforming for Multiuser MIMO-OFDM Systems

Yiyang Peng, Zheyu Wu, Bruno Clerckx

eess.SP ·submitted 2026-10-25 21:59 UTC · v1

Abstract

Microwave linear analog computing (MiLAC) has recently emerged as a promising approach for reducing the hardware and digital-processing requirements of large-scale multiple-input multiple-output (MIMO) systems. In narrowband multiuser systems, hybrid digital-MiLAC beamforming can achieve digital beamforming flexibility with only as many radio-frequency (RF) chains as data streams. However, extending this advantage to wideband systems is nontrivial because practical MiLAC circuits exhibit frequency-dependent responses. In this paper, we investigate hybrid digital-MiLAC beamforming for multiuser MISO-OFDM systems with a frequency-dependent MiLAC circuit model. We characterize the frequency dependence of MiLAC by relating the susceptance of each tunable component across subcarriers to its center-frequency value. Under this frequency coupling, we show that a single MiLAC circuit generally cannot simultaneously match the desired beamforming directions across all subcarriers, highlighting the essential role of subcarrier-dependent digital precoding. We then develop a block coordinate descent (BCD) algorithm to jointly optimize the digital and MiLAC beamformers for average sum-rate maximization. In particular, an efficient alternating direction method of multipliers (ADMM) algorithm is custom-designed to handle the frequency-coupled circuit constraints in the MiLAC beamformer subproblem. Simulation results show that the proposed hybrid digital-MiLAC design outperforms conventional hybrid digital-analog beamforming, particularly when fewer RF chains are available and the channel is more frequency-selective. With $64$ transmit antennas and $4$ data streams, it attains $96.3\%$ of the digital sum-rate using only $8$ RF chains. Furthermore, under highly frequency-selective channels and using $4$ RF chains, it provides a $48\%$ sum-rate gain over the conventional hybrid design.

Closest papers

Nearest neighbours by meaning across the whole index.

Two-Layer Microwave Linear Analog Computer (MiLAC)-Aided Multi-User MIMO Networks

eess.SP ·2026-10-28 ·Xiaohua Zhou, Tianyu Fang, Matteo Nerini, Yijie Mao, Bruno Clerckx
theory similarity 0.77
Abstract

Microwave linear analog computer (MiLAC)-aided beamforming, which performs signal processing directly in the analog domain, has recently emerged as a promising alternative to fully digital and hybrid beamforming for multi-antenna systems. However, existing studies have shown that a single lossless and reciprocal MiLAC at the transmitter cannot, in general, attain the performance of fully digital beamforming in multi-user scenarios. To overcome this limitation, we propose a two-layer MiLAC-aided transmit beamforming architecture for downlink multi-user multiple-input multiple-output (MIMO) networks. Leveraging multiport microwave network theory, we first establish a general physics-compliant model of the proposed architecture, and then derive a simplified model under the assumptions of unilateral and perfectly matched amplifiers. We prove that, with lossless and reciprocal MiLACs, the two-layer MiLAC-aided transmitter can realize any fully digital transmit beamformer, while a single-layer MiLAC-aided receiver can attain the same achievable rate as a fully digital linear combiner. We then derive closed-form mappings from fully digital transmit beamformers and receive combiners to their corresponding MiLAC-aided analog implementations. Based on these equivalence results, we formulate a sum-rate maximization problem for the considered multi-user MIMO network and develop an optimization framework for jointly designing the power allocation and scattering matrices of the MiLAC-aided transceivers. Numerical results validate the theoretical analysis and show that the proposed two-layer MiLAC-aided design attains the same sum-rate performance as its fully digital counterpart.

0.21

Finite-Resolution Microwave Linear Analog Computer (MiLAC)-Aided Multiuser Beamforming

eess.SP cs.IT ·2026-09-28 ·Zheyu Wu, Bruno Clerckx
theory similarity 0.72
Abstract · 16 pages, 7 figures, submitted to IEEE for possible publication

Large-scale antenna arrays are essential to future wireless networks but impose significant hardware and digital-processing burdens. The microwave linear analog computer (MiLAC) offers a promising architecture for addressing these challenges. In a MiLAC, beamforming is realized entirely in the analog domain through a reconfigurable multiport microwave network comprising tunable admittance elements. However, existing studies assume that these elements are continuously tunable, whereas practical implementations can support only finitely many configurable states. This paper investigates finite-resolution MiLAC-aided multiuser beamforming under lossless and reciprocal constraints with prescribed connectivity patterns. Each tunable susceptance is selected from a symmetric uniform finite-resolution codebook. We formulate an online problem that jointly optimizes the discrete susceptances and power allocation for a prescribed codebook, and an offline problem that designs the codebook based on channel statistics. By exploiting the odd-uniform codebook structure, we express each multilevel susceptance as a weighted sum of two-level variables and develop exact continuous penalty models for both the online beamforming and offline codebook design problems. We prove that, for sufficiently large penalty parameters, these penalty models are globally equivalent to their original discrete counterparts. Building on these formulations, we develop efficient ADMM-based algorithms for solving the two problems. Numerical results demonstrate that the performance of an unquantized fully-connected MiLAC can be approached with substantially reduced connectivity and finite resolution. In particular, a 3-bit stem-connected MiLAC achieves more than 95% of the sum-rate performance of the unquantized fully-connected MiLAC while requiring only 22% of its tunable components.

0.42

MiLAC-Aided Beamforming for MIMO Over-the-Air Computation

cs.IT ·2026-08-13 ·Yaru Wang, Deyou Zhang, Qingchao Li, Jun Liu, Chuang Shi
similarity 0.71
Abstract

Over-the-air computation (AirComp) enables low-latency wireless data aggregation, but its accuracy is limited by imperfect signal alignment over fading channels and receiver noise. Fully digital beamforming improves aggregation accuracy in multiple-input multiple-output (MIMO) AirComp systems but requires one radio-frequency (RF) chain per antenna. To reduce this hardware burden, we investigate microwave linear analog computer (MiLAC)-aided beamforming for MIMO AirComp. Under a lossless and reciprocal MiLAC model, we jointly optimize the transmit digital precoding matrices and the receive-side MiLAC aggregation matrix to minimize the mean squared error (MSE). An alternating optimization algorithm is developed, in which the precoding matrices are optimally updated using the Karush--Kuhn--Tucker conditions and bisection, while the resulting convex aggregation matrix subproblem is solved globally using projected gradient descent. Numerical results verify the algorithm's convergence and demonstrate that MiLAC-aided beamforming approaches the MSE performance of fully digital beamforming with substantially fewer RF chains and outperforms phase-shifter-based hybrid beamforming under the same RF-chain budget.

0.04

Projection-Based Partitioned MiLAC Architecture for MU-MIMO Precoding

eess.SP ·2026-11-16 ·Israel Coelho Cunha, Francisco L. F. Martins, Giovanni G. R. Milan, Fazal Asim, André L. F. de Almeida
published similarity 0.66
Abstract · 5 pages, 3 figures

This work proposes a partitioned Microwave Linear Analog Computer (MiLAC) architecture for user-specific MU-MIMO precoding based on independently configured analog subnetworks. The proposed method reformulates user-level interference suppression as an invertible projection-based transformation, which is computed from the channel and synthesized into the MiLAC admittances. While the resulting offline configuration incurs higher computational complexity than conventional ZFBF and regularized ZFBF, it remains substantially below fully digital Block Diagonalization. Once configured, the Sub-MiLACs perform the precoding operation in the analog domain, yielding significantly lower online processing complexity. Under ideal conditions, the proposed method achieves performance close to fully digital BD.

0.36

Exploiting Beam Squint for Near-Field Wideband Beamforming in Multi-User OFDMA Systems

eess.SP ·2026-10-17 ·Lanqing Zhi, Peilan Wang, Jun Fang
similarity 0.66
Abstract · 7 pages, 4 figures

The beam squint effect has traditionally been viewed as detrimental to near-field wideband beamforming due to the reduction of beamforming gain towards the desired direction. In this paper, we show that it can instead be harnessed as a benefit in a hardware-constrained orthogonal frequency division multiple access (OFDMA) system, where the system, equipped with a single radio-frequency (RF) chain, aims to serve multiple spatially distributed users by allocating different subcarriers to different users. By exploiting the beam squint effect, flexible frequency-dependent beamfocusing patterns are realized via parallel true-time-delay (TTD) units, enabling nearly full beamforming gain across users. In particular, we formulate a max-min rate optimization problem that jointly designs the time delays, subcarrier-user association, analog beamforming, and power allocation. To tackle the resulting nonconvex mixed-integer problem, a two-stage optimization framework is proposed. In Stage~I, subcarrier-user association and structured analog beamforming are jointly optimized. In Stage~II, power allocation is obtained via bisection search and inverse water-filling. Simulation results demonstrate that the proposed method can achieve a significant improvement by utilizing beam squint to serve multiple spatially distributed users in OFDMA systems.

0.24

Wideband Microwave Linear Analog Computer (MiLAC) for Frequency-Flat and Frequency-Selective Processing

cs.IT eess.SP ·2026-11-01 ·Juan Vidal Alegría, Matteo Nerini, Bruno Clerckx
similarity 0.65
Abstract · 15 pages, 6 figures. Copyright information may change upon publication at an IEEE journal

Microwave linear analog computer (MiLAC) has been proposed as an analog processing architecture to perform efficient computation in the microwave domain. Consisting of reconfigurable impedance networks, a MiLAC can extract many of the gains of large multi-antenna systems without costly digital processing, e.g., achieving capacity in narrowband multiple-input single-output (MISO). However, the behavior of wideband MiLAC, required to support high data-rate transmissions, is widely unknown. The impedance components of MiLACs have non-trivial frequency-dependent response, requiring specific implementations to characterize it. In this work, we consider MiLAC implementations based on LC resonators with tunable capacitance, which allow synthesizing near-arbitrary passive lossless impedance matrices at individual frequencies using inductors and varactors. We characterize the mapping between optimal MISO precoding at a reference frequency, and the vector of capacitances configuring the MiLAC. We derive the degrees of freedom (DoFs) remaining after fixing such optimum precoding at the reference frequency, and show that these DoFs can be exploited to tune the frequency response of the MiLAC. We propose two techniques to exploit these DoFs: a closed-form approach for frequency-flat MiLAC processing, and a numerical approach for multi-frequency MiLAC processing, optimizing processing at frequencies other than the reference one. The frequency-flat approach shows satisfactory performance in a simulated frequency-flat millimeter-wave scenario, approaching the performance of digital processing. The multi-frequency approach can adapt to the frequency-selectivity of a simulated sub-6GHz scenario, attaining gains over frequency-flat digital processing. This constitutes the first demonstration that realistic MiLAC implementations can be configured to perform independent computations at different frequencies.

0.27

Hybrid Precoding and Combining for O-RAN Massive MIMO Systems

cs.IT ·2026-11-11 ·Seraphin F. Kimaryo, Jung-Mo Moon, Kyungchun Lee
benchmark similarity 0.62
Abstract · 16 pages, 13 figures

Recently, the radio access network (RAN) has been reimagined through open RAN (O-RAN) architecture to overcome the limitations of the traditional monolithic, black-box design philosophy and to leverage emerging technologies such as cloud computing, machine learning, and artificial intelligence. Although O-RAN disaggregates the base station (BS) into independent components to enable modular deployment, this paradigm introduces new challenges in signal processing and beamforming. In particular, beamforming in O-RAN must account for fronthaul link (FHL) capacity constraints, coordinated operation of multiple radio units (possibly from different vendors), and resource management, including transmit power allocation. To address these challenges, this work proposes novel beamforming techniques for a downlink multiuser hybrid massive multiple-input multiple-output system, in which hybrid architectures are deployed at both the users and at each BS radio unit. We formulate a sum-rate maximization problem incorporating transmit-power, unit-modulus, and FHL capacity constraints. The proposed algorithm integrates gradient descent and the Lagrange multiplier method to design analog beamformers and digital precoders, respectively, whereas digital combiners are designed to render the received streams parallel to each other. By avoiding computationally intensive operations such as eigenvalue and singular value decompositions, the proposed approach, as evidenced by simulation results, achieves superior performance with moderate computational complexity compared to existing benchmark schemes.

0.33

A Fully Wave-Domain Wideband MU MIMO OFDM Transmitter via Stacked Intelligent Metasurfaces

eess.SP cs.AR ·2026-09-09 ·Zheao Li, Jiancheng An, Chau Yuen
similarity 0.60
Abstract

This paper proposes an advanced realization principle for wideband multiuser multiple-input multiple-output orthogonal frequency-division multiplexing (MU-MIMO OFDM) transmitters, where the conventional transmitter-side baseband chain is physically synthesized in the wave domain. For design and optimization purposes, this fully wave-domain wideband MU-MIMO OFDM transmitter implemented by a cascaded SIM structure is functionally partitioned into two cascaded SIM blocks. The first block, denoted as SIM_1, integrates symbol loading and channel-adaptive MU-MIMO precoding updated at the channel-coherence timescale, mapping the user streams to a virtual port-subcarrier representation. The second block, denoted as SIM_2, acts as an offline-configured sampling-rate modulator that materializes the inverse discrete Fourier transform (IDFT) and cyclic prefix (CP) insertion directly in the wave domain. This baseband-free architecture establishes a virtual-to-physical transition from information bits to radiated CP-extended OFDM waveforms. To account for practical nonidealities, SIM_2 is optimized to fit the ideal multi-port CP-OFDM operator, and its residual response is mapped into an effective coupling matrix. Then, SIM_1 is optimized in a communication-oriented manner by jointly adapting discrete phase shifts and stream-subcarrier power loading to maximize the sum spectral efficiency. Results demonstrate the convergence, architecture trade-off, wave-domain OFDM materialization accuracy, and competitive performance of the proposed baseband-free transmitter.

0.44