CS Paper Radar

A Fully Wave-Domain Wideband MU MIMO OFDM Transmitter via Stacked Intelligent Metasurfaces

Zheao Li, Jiancheng An, Chau Yuen

eess.SP cs.AR ·submitted 2026-09-09 05:09 UTC · v1

Abstract

This paper proposes an advanced realization principle for wideband multiuser multiple-input multiple-output orthogonal frequency-division multiplexing (MU-MIMO OFDM) transmitters, where the conventional transmitter-side baseband chain is physically synthesized in the wave domain. For design and optimization purposes, this fully wave-domain wideband MU-MIMO OFDM transmitter implemented by a cascaded SIM structure is functionally partitioned into two cascaded SIM blocks. The first block, denoted as SIM_1, integrates symbol loading and channel-adaptive MU-MIMO precoding updated at the channel-coherence timescale, mapping the user streams to a virtual port-subcarrier representation. The second block, denoted as SIM_2, acts as an offline-configured sampling-rate modulator that materializes the inverse discrete Fourier transform (IDFT) and cyclic prefix (CP) insertion directly in the wave domain. This baseband-free architecture establishes a virtual-to-physical transition from information bits to radiated CP-extended OFDM waveforms. To account for practical nonidealities, SIM_2 is optimized to fit the ideal multi-port CP-OFDM operator, and its residual response is mapped into an effective coupling matrix. Then, SIM_1 is optimized in a communication-oriented manner by jointly adapting discrete phase shifts and stream-subcarrier power loading to maximize the sum spectral efficiency. Results demonstrate the convergence, architecture trade-off, wave-domain OFDM materialization accuracy, and competitive performance of the proposed baseband-free transmitter.

Closest papers

Nearest neighbours by meaning across the whole index.

SIM-Enabled Wave-Domain Processing in MIMO-OFDM Receivers: Architecture, Modeling, and Validation

eess.SP ·2026-11-04 ·Zheao Li, Jiancheng An, Chau Yuen
similarity 0.80
Abstract

This paper develops a wave-domain linear receiver for wideband MIMO-OFDM, where the main high-dimensional linear processing conventionally performed after sampling is physically shifted to propagation through stacked intelligent metasurfaces (SIMs). The proposed receiver transforms receive-port waveforms into OFDM-domain symbols through three cascaded SIM-enabled functional sections. The first section, SIM_1, performs channel-memory processing and channel shortening in an energy-concentration sense, suppressing the out-of-cyclic-prefix (CP) effective tail before OFDM analysis. SIM_2 realizes CP removal and discrete Fourier transform (DFT) analysis as cyclic-windowed OFDM matched filtering by exploiting useful-window memory and analytical Fourier phase coding. SIM_3 implements residual virtual-subcarrier MIMO linear detection, completing the wave-domain linear receive chain up to symbol slicing. Synchronization, control, slicing, and decoding remain digital, while the dominant linear receive operations are moved to the wave domain. A staged configuration framework is developed: the numerology-dependent OFDM analyzer is compiled offline, whereas the channel-dependent memory processor and detector are configured over the coherence time using architecture-aware learning-assisted control. Numerical results validate both functional replacement and link performance, confirming nearly lossless replacement under CP-sufficient MIMO-OFDM conditions, with robustness to residual timing offsets and effective channel-delay-profile perturbations. Substantial gains under CP-insufficient channels are also demonstrated by suppressing out-of-CP leakage before OFDM analysis.

0.07

A Novel OFDM-FMCW Waveform for Low-Complexity Joint Sensing and Communication

eess.SP ·2026-10-18 ·Amir Bouziane, Salah Eddine Zegrar, Huseyin Arslan
publishedhighly cited similarity 0.61
Abstract

With the advent of 6th Generation (6G) wireless networks, integrating Orthogonal Frequency Division Multiplexing (OFDM) and Frequency Modulated Continuous Wave (FMCW) waveforms presents a promising solution for simultaneous communication and sensing. While OFDM offers high communication performance, it requires complex transceivers for sensing applications. Conversely, FMCW is easily implemented for sensing but provides low data rates for communication. This letter derives the mathematical relationship between OFDM and FMCW, showing how FMCW can be generated from the diagonal elements of the OFDM modulator (\ie, the Discrete Fourier Transform (DFT) matrix). We propose a novel approach that leverages the DFT matrix to seamlessly integrate these two waveforms, minimizing interference and enabling high data rate communication alongside low-complexity sensing receiver design. Extensive simulations demonstrate the effectiveness of our technique in achieving simultaneous sensing and

0.62

Frequency-Dependent Hybrid Digital and Microwave Linear Analog Computer (MiLAC) Beamforming for Multiuser MIMO-OFDM Systems

eess.SP ·2026-10-25 ·Yiyang Peng, Zheyu Wu, Bruno Clerckx
similarity 0.60
Abstract

Microwave linear analog computing (MiLAC) has recently emerged as a promising approach for reducing the hardware and digital-processing requirements of large-scale multiple-input multiple-output (MIMO) systems. In narrowband multiuser systems, hybrid digital-MiLAC beamforming can achieve digital beamforming flexibility with only as many radio-frequency (RF) chains as data streams. However, extending this advantage to wideband systems is nontrivial because practical MiLAC circuits exhibit frequency-dependent responses. In this paper, we investigate hybrid digital-MiLAC beamforming for multiuser MISO-OFDM systems with a frequency-dependent MiLAC circuit model. We characterize the frequency dependence of MiLAC by relating the susceptance of each tunable component across subcarriers to its center-frequency value. Under this frequency coupling, we show that a single MiLAC circuit generally cannot simultaneously match the desired beamforming directions across all subcarriers, highlighting the essential role of subcarrier-dependent digital precoding. We then develop a block coordinate descent (BCD) algorithm to jointly optimize the digital and MiLAC beamformers for average sum-rate maximization. In particular, an efficient alternating direction method of multipliers (ADMM) algorithm is custom-designed to handle the frequency-coupled circuit constraints in the MiLAC beamformer subproblem. Simulation results show that the proposed hybrid digital-MiLAC design outperforms conventional hybrid digital-analog beamforming, particularly when fewer RF chains are available and the channel is more frequency-selective. With $64$ transmit antennas and $4$ data streams, it attains $96.3\%$ of the digital sum-rate using only $8$ RF chains. Furthermore, under highly frequency-selective channels and using $4$ RF chains, it provides a $48\%$ sum-rate gain over the conventional hybrid design.

0.39

Spectral-Efficient MIMO-OFDM: Low-Complexity Solution based on Random Multiplexing

eess.SP ·2026-08-27 ·Jie Yang, Wanchen Hu, Yi Song, Shuangyang Li, Burak Çakmak +3 more
similarity 0.60
Abstract

This paper presents a low-complexity precoded MIMO-OFDM system for achieving improved spectral efficiency (SE) via intentionally compressing information symbols among subcarriers. Particularly, the proposed scheme leverages the powerful random multiplexing mechanism for precoding, and adopts the linear-complexity orthogonal approximate message passing (OAMP) estimator for symbol detection, where the compatibility with the existing fifth generation (5G) architectures is fully preserved. We further provide the theoretical analysis based on the replica-symmetric (RS) formula. This analysis confirms the advantages of the proposed system with respect to the adopted compression ratios, where an interesting phase transition behavior is verified. Numerical results coincide with our analysis and demonstrate significant improvements in terms of achievable rates and bit error rate (BER) compared to conventional MIMO-OFDM counterpart, making the proposed scheme a promising solution to 6G and beyond wireless networks.

0.13

FM-OFDM: A Constant-Envelope Sensing Waveform with Phase-Differencing Receiver Processing

eess.SP ·2026-09-22 ·Amir Bouziane, Hüseyin Arslan
similarity 0.59
Abstract

Cyclic-prefix orthogonal frequency-division multiplexing (CP-OFDM) is widely adopted as a reference waveform for integrated sensing and communication (ISAC). However, its high peak-to-average power ratio (PAPR) requires power amplifier back-off, thereby reducing the available sensing link budget. Frequency-modulated OFDM (FM-OFDM) provides a constant-envelope signal with 0 dB PAPR and has demonstrated reliable communication performance in high-mobility scenarios, but its sensing characteristics remain largely unexplored. This paper characterizes FM-OFDM as a sensing waveform based on its bandwidth, ambiguity function, sidelobe behavior, and Doppler estimation capability. The analysis shows that its data dependent sidelobe floor is incoherent and decreases through across frame integration, whereas the corresponding CP-OFDM floor remains unchanged. Consequently, under equal occupied bandwidth and transmit power, frame-level integration reverses the single-symbol performance ordering and provides FM-OFDM with approximately 20 dB of additional dynamic range for weak-target detection. Moreover, the zero-delay cut of the FMOFDM ambiguity function is shown to be deterministic and independent of the transmitted data realization, in contrast to linearly modulated waveforms, while a closed-form expression is derived for the sidelobe floor away from the zero-delay cut. Since the nonlinear mapping between the data symbols and time-domain samples prevents the direct application of the conventional CP-OFDM range-Doppler processing chain, a weighted phase-increment Doppler estimator is developed. The proposed estimator enables closed-form prediction of the sensing floor and its crossover point with a minimum computational complexity.

0.32

Spectral Efficiency Analysis of Massive MIMO-OFDM Systems with Double Quantization

cs.IT ·2026-10-07 ·Bengu Bilgic Keskin, A. Oguz Kislal, Ali Gorcin, Özlem Tuğfe Demir
similarity 0.58
Abstract

Massive multiple-input multiple-output (MIMO) achieves a high spectral efficiency (SE) by employing a large number of receive antennas in the uplink. Employing many receive antennas requires a large number of analog-to-digital converters (ADCs) and a high fronthaul data rate. Low-resolution ADCs can reduce power consumption and cost, while fronthaul quantization can reduce the required fronthaul data rate, at the expense of quantization distortion at both stages. In wideband orthogonal frequency-division multiplexing systems, ADC quantization is performed in the time domain, while fronthaul quantization may be applied after the discrete Fourier transform to transmit only active subcarriers. In this study, we investigate the achievable uplink SE over fronthaul links under double quantization and imperfect channel estimation. We derive a linear minimum mean-squared error channel estimator from the double-quantized pilot observations and obtain an achievable SE using the use-and-then-forget bound. Numerical results demonstrate that the ADC and fronthaul quantization resolutions have comparable impacts on the achievable SE. When the two resolutions differ, the lower resolution becomes the dominant factor limiting the SE. Furthermore, our numerical results show that six-bit ADC and fronthaul quantization achieve more than 90% of the SE attained in the ideal case.

0.21

Noncoherent MIMO in the FR3 Upper Mid-Band Using Grassmannian Signaling: Prototype and Experimental Evaluation

eess.SP math.DG ·2026-10-06 ·Álvaro Pendás-Recondo, Enrique Pendás-Recondo, Álvaro F. Vaquero, Marcos R. Pino, Jesús Alberto López-Fernández
similarity 0.57
Abstract · 13 pages, 9 figures

This work presents a prototype implementation of a noncoherent multiple-input multiple-output (MIMO) system based on Grassmannian signalling, where neither the transmitter nor receiver requires channel state information (CSI), operating at a carrier frequency of 15 GHz in the frequency range 3 (FR3) upper mid-band envisioned for 6G. To the best of our knowledge, this is the first prototype implementation of Grassmannian signaling reported in the literature beyond sub-6 GHz bands. We identify the motivation of applying Grassmannian signaling, a form of unitary space-time modulation (USTM), in this band for wireless and mobile applications with low spectral-efficiency requirements but strict reliability and power-efficiency demands. With this idea in mind, we present a system design integrated with orthogonal frequency-division multiplexing (OFDM) that addresses the challenges associated with the higher carrier frequencies of FR3 while providing reliable operation across a broad range of scenarios, including urban and rural environments as well as vehicular communications. We then present the prototype implementation of the proposed design, based on software-defined radio (SDR) devices integrated with radio-frequency (RF) mixers, filters, and power amplifiers to ensure adequate operation in the targeted band. Over-the-air (OTA) experiments based on symbol error rate (SER) measurements under non-line-of-sight (NLoS) and line-of-sight (LoS) scenarios, and across different data rates, show good agreement with software simulations, thereby validating the prototype implementation.

0.28

Delay-Doppler Domain Aided OFDM (DD-a-OFDM): Pulsone Pilot and Cross-Domain Iterative Receiver Design

eess.SP ·2026-10-21 ·Rongrong Xin, Zhiqiang Wei, Zai Yang
similarity 0.57
Abstract

In high-mobility channels, the widely adopted orthogonal frequency division multiplexing (OFDM) modulation waveform suffers from significant performance degradation due to channel variation and severe inter-carrier interference. Although delay-Doppler (DD) domain multicarrier (DDMC) modulation enjoys a higher channel estimation (CE) accuracy via exploiting the inherent DD-domain channel stability, sparsity, and separability, its high detection complexity limits its practical deployment, making OFDM still a promising waveform candidate for the sixth-generation (6G) cellular networks. To simultaneously harness the complementary strengths of DDMC and OFDM and mitigate their respective limitations, this paper proposes a DD-domain aided OFDM (DD-a-OFDM) framework, including a pulsone pilot (PP) design and a cross-domain iterative receiver design, to enhance the CE and detection performance of OFDM in high-mobility channels. Specifically, a pulsone pilot sequence is periodically inserted before the cyclic prefix (CP) for each OFDM symbol in the time-domain, which is equivalent to a single DD-domain pilot impulse and enables accurate DD-domain CE. Then, we propose a cross-domain iterative receiver in which the time-frequency (TF) domain detection results are transformed into the DD-domain for interference cancellation and CE; in turn, the DD-domain estimated channel is transformed into the TF-domain for channel reconstruction and symbol detection. The proposed cross-domain iterative receiver achieves a higher CE accuracy and detection performance with a much lower pilot overhead, compared to the conventional OFDM system. Simulation results validate the fast convergence and superior performance of the proposed DD-a-OFDM scheme and demonstrate that it maintains a robust CE and detection performance even in high-mobility channels.

0.16