CS Paper Radar

Noncoherent MIMO in the FR3 Upper Mid-Band Using Grassmannian Signaling: Prototype and Experimental Evaluation

Álvaro Pendás-Recondo, Enrique Pendás-Recondo, Álvaro F. Vaquero, Marcos R. Pino, Jesús Alberto López-Fernández

eess.SP math.DG ·submitted 2026-10-06 09:54 UTC · v1

Abstract

This work presents a prototype implementation of a noncoherent multiple-input multiple-output (MIMO) system based on Grassmannian signalling, where neither the transmitter nor receiver requires channel state information (CSI), operating at a carrier frequency of 15 GHz in the frequency range 3 (FR3) upper mid-band envisioned for 6G. To the best of our knowledge, this is the first prototype implementation of Grassmannian signaling reported in the literature beyond sub-6 GHz bands. We identify the motivation of applying Grassmannian signaling, a form of unitary space-time modulation (USTM), in this band for wireless and mobile applications with low spectral-efficiency requirements but strict reliability and power-efficiency demands. With this idea in mind, we present a system design integrated with orthogonal frequency-division multiplexing (OFDM) that addresses the challenges associated with the higher carrier frequencies of FR3 while providing reliable operation across a broad range of scenarios, including urban and rural environments as well as vehicular communications. We then present the prototype implementation of the proposed design, based on software-defined radio (SDR) devices integrated with radio-frequency (RF) mixers, filters, and power amplifiers to ensure adequate operation in the targeted band. Over-the-air (OTA) experiments based on symbol error rate (SER) measurements under non-line-of-sight (NLoS) and line-of-sight (LoS) scenarios, and across different data rates, show good agreement with software simulations, thereby validating the prototype implementation.

Comment
13 pages, 9 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Structured Design of Layered Sparse Unitary Space-Time Modulation for Integrated Noncoherent and Coherent MIMO Communications

eess.SP math.DG ·2026-11-17 ·Álvaro Pendás-Recondo, Enrique Pendás-Recondo, Rafael González Ayestarán, Jesús Alberto López-Fernández, Ignacio Santamaria
similarity 0.64
Abstract · 13 pages, 8 figures

This work presents a novel structured constellation design based on unitary space-time modulation (USTM) for integrated noncoherent and coherent multiple-input multiple-output (MIMO) communications. Information is encoded into the sparse space-time matrices through two layers: a noncoherent layer that distinguishes points on the Grassmann manifold (subspaces) and a coherent layer that distinguishes among the Stiefel representatives associated with each of those points (bases for the subspaces). We consider sequential decoding of the two layers to reduce computational complexity, while explicitly identifying the matrix structures that favor this decoding strategy. The proposed constellation builds on a previous structured Grassmannian signaling design, which has the remarkable property of producing space-time matrices with a single nonzero entry per row, while introducing a novel systematic design for the second layer corresponding to the Stiefel representatives. The design of the second layer preserves the sparsity of the first layer and significantly reduces the decoding computational complexity, while ensuring reliable performance under sequential decoding and enabling a simple yet effective bit labeling, as validated by numerical results in terms of bit error rate (BER) and symbol error rate (SER). Numerical results also show graceful performance degradation under channel correlation and, for limited coherence intervals where channel state information at the receiver (CSIR) can be estimated only imperfectly, improved performance compared with classical space-time block coding (STBC) schemes based on QAM and PSK.

0.28

A Novel Coexistence Scheme for OFDM and OTFS Waveforms for Uplink in 6G Networks

eess.SP ·2026-10-12 ·Badr Eddine Ouakouak, Salah Eddine Zegrar, Hüseyin Arslan
top venue similarity 0.62
Abstract · Published in IEEE Transactions on Communications, Date 2025/7/10, Volume 73, Isse 11, Page range 12008-12022

The upcoming sixth generation (6G) wireless networks are designed to support advanced applications that the current air interface based on orthogonal frequency division multiplexing (OFDM) cannot accommodate, necessitating innovations in waveform design. Orthogonal time frequency space (OTFS) has emerged as a promising alternative, offering enhanced performance particularly in high-mobility channel environments. However, deploying fundamentally different waveforms over the same frequencies fails to exploit the mutual relationships between them. In this paper, a forward-compatible yet backward-compatible coexistence framework is proposed, where various OFDM waveform options are incorporated while seamlessly integrating OTFS within the same network. The proposed coexistence paradigm involves utilizing a specially designed spreading matrix in the delay-Doppler (DD) domain to process OTFS data. The matrix is tailored to establish orthogonality between OTFS and OFDM waveforms, effectively reducing cross-interference when both coexist within the same time-frequency (TF) resources. Our results demonstrate up to a 6 dB improvement in bit error rate (BER) performance for the OTFS waveform compared to other coexistence schemes. The proposed approach also shows greater interference resilience and approaches the upper bounds of achievable rates. By utilizing the full bandwidth and time duration, it enhances range and velocity resolutions, leading to improved sensing performance. These findings are supported by mathematical analysis and extensive simulations for uplink scenarios.

0.68

A Novel OFDM-FMCW Waveform for Low-Complexity Joint Sensing and Communication

eess.SP ·2026-10-18 ·Amir Bouziane, Salah Eddine Zegrar, Huseyin Arslan
publishedhighly cited similarity 0.58
Abstract

With the advent of 6th Generation (6G) wireless networks, integrating Orthogonal Frequency Division Multiplexing (OFDM) and Frequency Modulated Continuous Wave (FMCW) waveforms presents a promising solution for simultaneous communication and sensing. While OFDM offers high communication performance, it requires complex transceivers for sensing applications. Conversely, FMCW is easily implemented for sensing but provides low data rates for communication. This letter derives the mathematical relationship between OFDM and FMCW, showing how FMCW can be generated from the diagonal elements of the OFDM modulator (\ie, the Discrete Fourier Transform (DFT) matrix). We propose a novel approach that leverages the DFT matrix to seamlessly integrate these two waveforms, minimizing interference and enabling high data rate communication alongside low-complexity sensing receiver design. Extensive simulations demonstrate the effectiveness of our technique in achieving simultaneous sensing and

0.62

A Fully Wave-Domain Wideband MU MIMO OFDM Transmitter via Stacked Intelligent Metasurfaces

eess.SP cs.AR ·2026-09-09 ·Zheao Li, Jiancheng An, Chau Yuen
similarity 0.57
Abstract

This paper proposes an advanced realization principle for wideband multiuser multiple-input multiple-output orthogonal frequency-division multiplexing (MU-MIMO OFDM) transmitters, where the conventional transmitter-side baseband chain is physically synthesized in the wave domain. For design and optimization purposes, this fully wave-domain wideband MU-MIMO OFDM transmitter implemented by a cascaded SIM structure is functionally partitioned into two cascaded SIM blocks. The first block, denoted as SIM_1, integrates symbol loading and channel-adaptive MU-MIMO precoding updated at the channel-coherence timescale, mapping the user streams to a virtual port-subcarrier representation. The second block, denoted as SIM_2, acts as an offline-configured sampling-rate modulator that materializes the inverse discrete Fourier transform (IDFT) and cyclic prefix (CP) insertion directly in the wave domain. This baseband-free architecture establishes a virtual-to-physical transition from information bits to radiated CP-extended OFDM waveforms. To account for practical nonidealities, SIM_2 is optimized to fit the ideal multi-port CP-OFDM operator, and its residual response is mapped into an effective coupling matrix. Then, SIM_1 is optimized in a communication-oriented manner by jointly adapting discrete phase shifts and stream-subcarrier power loading to maximize the sum spectral efficiency. Results demonstrate the convergence, architecture trade-off, wave-domain OFDM materialization accuracy, and competitive performance of the proposed baseband-free transmitter.

0.44

Delay-Doppler Domain Aided OFDM (DD-a-OFDM): Pulsone Pilot and Cross-Domain Iterative Receiver Design

eess.SP ·2026-10-21 ·Rongrong Xin, Zhiqiang Wei, Zai Yang
similarity 0.57
Abstract

In high-mobility channels, the widely adopted orthogonal frequency division multiplexing (OFDM) modulation waveform suffers from significant performance degradation due to channel variation and severe inter-carrier interference. Although delay-Doppler (DD) domain multicarrier (DDMC) modulation enjoys a higher channel estimation (CE) accuracy via exploiting the inherent DD-domain channel stability, sparsity, and separability, its high detection complexity limits its practical deployment, making OFDM still a promising waveform candidate for the sixth-generation (6G) cellular networks. To simultaneously harness the complementary strengths of DDMC and OFDM and mitigate their respective limitations, this paper proposes a DD-domain aided OFDM (DD-a-OFDM) framework, including a pulsone pilot (PP) design and a cross-domain iterative receiver design, to enhance the CE and detection performance of OFDM in high-mobility channels. Specifically, a pulsone pilot sequence is periodically inserted before the cyclic prefix (CP) for each OFDM symbol in the time-domain, which is equivalent to a single DD-domain pilot impulse and enables accurate DD-domain CE. Then, we propose a cross-domain iterative receiver in which the time-frequency (TF) domain detection results are transformed into the DD-domain for interference cancellation and CE; in turn, the DD-domain estimated channel is transformed into the TF-domain for channel reconstruction and symbol detection. The proposed cross-domain iterative receiver achieves a higher CE accuracy and detection performance with a much lower pilot overhead, compared to the conventional OFDM system. Simulation results validate the fast convergence and superior performance of the proposed DD-a-OFDM scheme and demonstrate that it maintains a robust CE and detection performance even in high-mobility channels.

0.16

6G Uplink Waveform and Rank Selection under Distributed Reception

cs.IT eess.SP ·2026-11-01 ·Yewen Cao, Fen Hou, Yulin Shao
similarity 0.57
Abstract

The development of 6G uplink is expanding waveform and spatial transmission options, while distributed reception makes their relative merits depend on the spatial and frequency structure of the aggregate channel. We study the joint selection of cyclic prefix orthogonal frequency-division multiplexing and discrete Fourier transform spread OFDM at rank 1 and noncoherent rank 2 under common user equipment power constraints and centralized linear minimum mean-square error reception. We derive waveform switching thresholds at both ranks and a rank selection margin, establishing conditions for selecting among the four modes based on available transmit power, DFT despreading loss, and spatial multiplexing gain. We then characterize how port gains and correlations at individual access points (APs) form aggregate spatial separation and influence mode selection. At fixed port gains and available transmit powers, improving spatial separation without reducing it on any subcarrier increases the rank selection margin, while its effect on the preferred waveform within rank 2 depends on the frequency distribution of the improvement. Numerical results show that different AP deployments can favor different waveforms and ranks, even with the same receive antenna budget and comparable aggregate channel gains, including waveform switches at a fixed preferred rank.

0.28

Rainfall Sensing via Mobile Communication Signals

eess.SP cs.NI ·2026-08-17 ·Zhongqin Wang, J. Andrew Zhang, Kai Wu, Y. Jay Guo
similarity 0.54
Abstract · 13 pages, 13 figures

Rainfall monitoring is important for hydrological observation, disaster warning, and environmental sensing, but conventional rain gauges and weather radars suffer from sparse deployment and high infrastructure costs. This paper proposes PMN-RainSense, a rainfall sensing framework using sub-6-GHz mobile communication signals that supports practical single-antenna deployment. Unlike attenuation-based approaches, which are unreliable at sub-6 GHz because rain-induced attenuation over short mobile access links is only on the order of hundredths of a decibel, the proposed framework exploits fine-grained dynamics. A spectral-temporal channel state information (CSI) compensation method suppresses packet-wise timing and phase distortions while preserving sensing-relevant information. Rainfall-sensitive features are extracted from the delay-Doppler domain to mitigate environmental interference, with angle-domain filtering as an optional extension for multi-antenna receivers. Under bandwidth and antenna constraints, rainfall-correlated Doppler fluctuations serve as the dominant sensing signature, while Doppler-domain normalization improves robustness across links and deployments. Controlled WiFi experiments demonstrate rainfall-associated Doppler broadening and achieve a three-class classification accuracy of 95.48% using a random forest classifier. Long-Term Evolution (LTE) CSI measurements collected from cellular base stations over 11 carrier frequencies from 0.763 to 2.68 GHz yield a mean absolute error (MAE) of 0.25-0.27 mm/h for rainfall intensity estimation using a one-dimensional convolutional network.

0.26

Aggressive Non-Orthogonal Transmission with DFT-s-OFDM for Direct Device-to-Satellite Communications

eess.SP ·2026-08-17 ·Chathura Jayawardena, Konstantinos Nikitopoulos
published similarity 0.54
Abstract · Accepted at IEEE CAMAD 2026

Direct Device-to-Satellite (D2S) communications promise global connectivity to unmodified user equipment (UE), extending coverage beyond terrestrial networks. Realizing this promise is fundamentally challenging: severe path loss and limited UE transmit power push uplink SNRs far below terrestrial norms, while suitable spectrum remains scarce. Together, these constraints impose a spectral-efficiency (SE) bottleneck, and under such conditions the efficiency of the UE power amplifier becomes critical, jointly governing transmit power and battery life. To improve UE-side power efficiency, 3GPP has adopted Discrete Fourier Transform-spread OFDM (DFT-s-OFDM) as an optional uplink waveform, exploiting its substantially lower Peak-to-Average Power Ratio (PAPR) relative to OFDM. To break the SE bottleneck, we show that aggressive non-orthogonal transmission, in which the number of concurrent users exceeds the number of receive antennas by more than 2x, can unlock substantial capacity gains that remain entirely unexploited. Realising these gains, however, requires receiver architectures that, to the best of our knowledge, have not yet been developed. DFT-s-OFDM intensifies the difficulty: the DFT spreading couples signal components across subcarriers, inflating the effective dimensionality of the detection problem. We address both challenges with a novel receiver design that jointly exploits the SE gains of aggressive non-orthogonal transmission and the power-efficiency benefits of DFT-s-OFDM. Simulations under realistic channel-estimation errors and high-mobility Doppler show that the proposed scheme achieves 2x the SE of baseline, surpasses recent nonlinear MIMO receivers by 40% at 15% of their complexity, and reduces PAPR by up to 6 dB relative to DFT-s-OFDM MIMO and 11 dB relative to OFDM.

0.30