CS Paper Radar

Exploiting Beam Squint for Near-Field Wideband Beamforming in Multi-User OFDMA Systems

Lanqing Zhi, Peilan Wang, Jun Fang

eess.SP ·submitted 2026-10-17 09:22 UTC · v1

Abstract

The beam squint effect has traditionally been viewed as detrimental to near-field wideband beamforming due to the reduction of beamforming gain towards the desired direction. In this paper, we show that it can instead be harnessed as a benefit in a hardware-constrained orthogonal frequency division multiple access (OFDMA) system, where the system, equipped with a single radio-frequency (RF) chain, aims to serve multiple spatially distributed users by allocating different subcarriers to different users. By exploiting the beam squint effect, flexible frequency-dependent beamfocusing patterns are realized via parallel true-time-delay (TTD) units, enabling nearly full beamforming gain across users. In particular, we formulate a max-min rate optimization problem that jointly designs the time delays, subcarrier-user association, analog beamforming, and power allocation. To tackle the resulting nonconvex mixed-integer problem, a two-stage optimization framework is proposed. In Stage~I, subcarrier-user association and structured analog beamforming are jointly optimized. In Stage~II, power allocation is obtained via bisection search and inverse water-filling. Simulation results demonstrate that the proposed method can achieve a significant improvement by utilizing beam squint to serve multiple spatially distributed users in OFDMA systems.

Comment
7 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Frequency-Dependent Hybrid Digital and Microwave Linear Analog Computer (MiLAC) Beamforming for Multiuser MIMO-OFDM Systems

eess.SP ·2026-10-25 ·Yiyang Peng, Zheyu Wu, Bruno Clerckx
similarity 0.66
Abstract

Microwave linear analog computing (MiLAC) has recently emerged as a promising approach for reducing the hardware and digital-processing requirements of large-scale multiple-input multiple-output (MIMO) systems. In narrowband multiuser systems, hybrid digital-MiLAC beamforming can achieve digital beamforming flexibility with only as many radio-frequency (RF) chains as data streams. However, extending this advantage to wideband systems is nontrivial because practical MiLAC circuits exhibit frequency-dependent responses. In this paper, we investigate hybrid digital-MiLAC beamforming for multiuser MISO-OFDM systems with a frequency-dependent MiLAC circuit model. We characterize the frequency dependence of MiLAC by relating the susceptance of each tunable component across subcarriers to its center-frequency value. Under this frequency coupling, we show that a single MiLAC circuit generally cannot simultaneously match the desired beamforming directions across all subcarriers, highlighting the essential role of subcarrier-dependent digital precoding. We then develop a block coordinate descent (BCD) algorithm to jointly optimize the digital and MiLAC beamformers for average sum-rate maximization. In particular, an efficient alternating direction method of multipliers (ADMM) algorithm is custom-designed to handle the frequency-coupled circuit constraints in the MiLAC beamformer subproblem. Simulation results show that the proposed hybrid digital-MiLAC design outperforms conventional hybrid digital-analog beamforming, particularly when fewer RF chains are available and the channel is more frequency-selective. With $64$ transmit antennas and $4$ data streams, it attains $96.3\%$ of the digital sum-rate using only $8$ RF chains. Furthermore, under highly frequency-selective channels and using $4$ RF chains, it provides a $48\%$ sum-rate gain over the conventional hybrid design.

0.39

QoS-Aware Energy-Efficient Sub-THz Near-Field Multiuser Hybrid MIMO Systems Employing Circular Arrays

cs.IT cs.ET ·2026-11-08 ·Priya Gupta, Prabhanshu Yadav, Suraj Srivastava
similarity 0.63
Abstract

Near-field communications have emerged as a promising technology for future sixth-generation (6G) networks. However, designing energy-efficient hybrid beamfocusing schemes for multiuser (MU) systems remains challenging due to the non-convex quality-of-service (QoS) constraints and hardware limitations of hybrid architectures. In this paper, we investigate a hybrid massive multiple-input multiple-output (MIMO) architecture for a near-field sub-THz MU downlink system employing a large uniform circular array (UCA) at the base station. A QoS-aware transmit power minimization problem is formulated for energy-efficient beamfocusing and addressed through a two-stage penalty-driven joint optimization (PDJO) framework, where auxiliary variables are introduced to reformulate the QoS constraints into second-order cone (SOC) constraints. Furthermore, a near-field polar-domain codebook is developed via joint angle- and distance-domain sampling. We establish that the fully digital (FD) beamfocuser lies within the column space of the proposed codebook, enabling hybrid precoder design to be formulated as a multiple measurement vector (MMV)-based sparse approximation problem. The formulated problem is then solved using a low-complexity simultaneous orthogonal matching pursuit (SOMP) algorithm under hardware and transmit power constraints. Simulation results demonstrate that the proposed framework achieves spectral- and energy-efficiency performance close to the ideal FD beamfocusing scheme while providing a favorable trade-off between hardware complexity and system performance.

0.22

Wideband Hybrid Beamforming via Programmable Unitary Mixer--TTD RF Networks

eess.SP ·2026-11-15 ·Nikola Zlatanov, Damir Salakhov, Zhen Gao
published similarity 0.62
Abstract · Accepted

This paper proposes a wideband hybrid beamforming architecture whose analog front-end consists of fixed unitary mixers interlaced with programmable diagonal phase-shift/true-time-delay (TTD) layers. Under ideal passive-component assumptions, the analog beamformer is semi-unitary on every OFDM subcarrier, so the injected RF-chain power reaches the antenna ports without analog-network loss. We design the phase shifts and delays of the programmable diagonal phase-shift/TTD layers for OFDM sum-rate maximization. Numerical results show that increasing mixer--TTD depth improves the sum rate under ideal component assumptions and a common injected RF-power budget. With component losses included, a shallow design retains an advantage over the evaluated hybrid baselines at low-to-moderate powers, motivating deeper implementations with low accumulated loss.

0.43

Joint Transceiver and Group Index Modulation Design for Wideband Integrated Sensing and Communications Under Beam Squint

eess.SP ·2026-09-27 ·Kaiwen Zheng, Shijian Gao
benchmark similarity 0.62
Abstract

The combination of ultra-wide bandwidth and large-scale multiple-input multiple-output arrays with frequency-independent phase shifters induces beam squint, causing frequency and distance dependent array gain variations across subcarriers and degrading integrated sensing and communications performance. Transceiver beamforming and group index modulation (GIM) can alleviate the impact of beam squint on communication and sensing performance. However, their designs are coupled in the frequency domain, as beamforming shapes the subcarrier responses on which GIM grouping and activation depend. To address this coupling, we propose a joint transceiver beamforming and GIM design that maximizes a weighted combination of normalized worst-case communication and sensing distances. An alternating optimization algorithm jointly refines the transceiver beamformers and GIM configuration. Simulation results show that the proposed joint design reduces bit error rate in the high signal-to-noise ratio region and achieves a more favorable communication-sensing trade-off, while maintaining an average sensing AUC comparable to that of the considered GIM based benchmark schemes.

0.24

Robust Near-Field Beam Focusing Under Imperfect Localization

eess.SP ·2026-08-19 ·Nima Mozaffarikhosravi, Amirhossein Azarbahram, Prathapasinghe Dharmawansa, Italo Atzeni
similarity 0.61
Abstract · To be presented at the International Workshop on Smart Antennas (WSA) 2026

The transition to 6G-and-beyond wireless systems with large-scale antenna arrays and high-frequency deployments significantly extends the near-field region, where channels exhibit a strong dependence on user location. While this enables location-based beam focusing as a low-overhead alternative to conventional channel estimation, its performance is highly sensitive to localization errors. In this paper, we study robust near-field beam focusing under imperfect user localization. We explicitly characterize the impact of localization errors on the line-of-sight-dominated channel by deriving a tractable uncertainty model via a first-order Taylor approximation, which captures the coupled effects of distance and angle in near-field propagation. Building on this model, we formulate a max-min signal-to-interference-plus-noise ratio optimization problem that guarantees performance under worst-case channel realizations induced by bounded localization errors. The resulting problem is reformulated into a feasibility problem using semidefinite relaxation. Numerical results demonstrate that the proposed robust design significantly improves the worst-user rate compared to non-robust beam focusing, particularly under high total transmit power levels and large localization error ranges.

0.32

Rate-Splitting Multiple Access for RIS-Enabled Full-Duplex Communications with User Relaying

cs.IT ·2026-10-13 ·Yuwen Cao, Hui Wang, Tomoaki Ohtsuki, Shahid Mumtaz
similarity 0.60
Abstract

Rate splitting multiple access (RSMA) has emerged as a promising non-orthogonal transmission mechanism to improve spectral- and energy efficiency, and user fairness in multi-antenna broadband channels. To further enhance its performance, in this paper we investigate a novel cooperative RSMA (C-RSMA) transmission framework assisted by reconfigurable intelligent surface (RIS) and user relaying. More specifically, we first formulate the common- and private-rate maximization problem satisfying the transmit power constraint, by jointly optimizing the transmit beamformers at the BS and the reflective beamformer at the RIS. The above formulated problem is an intractable and NP-hard problem as the optimization variables are coupled and the strong residual self-interference (SI) is involved. To conquer the challenge mentioned above, we propose a low-complexity alternative optimization approach to jointly optimize the transmit and reflective beamforming. Simulation results show that our approach is capable of enabling superior sum-rate performance than the RIS-assisted space division multiple access (SDMA), half-duplex RSMA, and SDMA without using RIS schemes.

0.10

Near-Field Beamforming Design for Multi-IRS Wireless Beam Routing

eess.SP ·2026-10-07 ·Tao Wang, Changsheng You, Changchuan Yin
published similarity 0.60
Abstract · 5 pages, 3 figures, accepted by IEEE Communications Letters

This letter investigates efficient near-field beamforming designs for wireless communication systems aided by multiple extremely large-scale intelligent reflecting surfaces (Multi-XL-IRSs). Previous studies have mostly assumed far-field channel conditions, based on which angle-based beamforming is adopted for the base station (BS) and IRSs. However, this approach may lead to degraded performance in practical near-field scenarios. To address this issue, we consider near-field channel modeling and formulate an optimization problem aimed at maximizing the received power at the user equipment (UE) by jointly optimizing the beamforming at the BS and IRSs. Given the intractability under the beam training (BT)-based communication framework, the problem is revisited and reformulated. Subsequently, an efficient algorithm based on alternating optimization (AO) is proposed to solve the reformulated problem. Numerical results demonstrate that, in typical setups, our AO-based beamforming designs provide over 170% and 20% received power gains over conventional angle-based beamforming and beam focusing, respectively. Furthermore, the power scaling law derived under far-field conditions no longer holds in near-field scenarios.

0.56

Joint Beamforming for Continuous Transmissive RIS-Enabled Multiuser Communications

cs.IT ·2026-10-06 ·Beining Han, Shumeng Zhang, Deyou Zhang, Qingchao Li, Jun Liu +1 more
similarity 0.59
Abstract

This paper studies continuous transmissive reconfigurable intelligent surface (CT-RIS)-enabled multiuser downlink communications, where passive beamforming is characterized by a phase function defined over the continuous aperture. We employ a distance-dependent spherical-wave model for the base station (BS)-to-CT-RIS link and introduce a finite-path model based on field-response vectors for the CT-RIS-to-user links. The resulting weighted sum rate maximization problem jointly optimizes the finite-dimensional BS precoders and the infinite-dimensional CT-RIS phase function, giving rise to a mixed finite- and infinite-dimensional non-convex optimization problem. To address this problem, we develop an alternating optimization algorithm that combines a closed-form BS precoder update with a functional phase update derived using the calculus of variations and minorization-maximization. Numerical results demonstrate that the proposed CT-RIS consistently outperforms the considered benchmarks, with the performance gains attributed to spatially continuous phase control and a larger effective receiving area.

0.24